Fabrication of 3D-Printed Ceramic Structures for Portable Solar Desalination Devices.

This paper proposes the fabrication process of the first fully 3D-printed ceramic core structures for portable solar desalination devices optimized to tackle water scarcity from an energy and sustainability perspective. Robocasting, a 3D printing technique, is utilized to fabricate a fully ceramic structure of an integrated solar absorber/thermal insulator/water transporter based on the two-layered structure of modified graphene on silica (MG@Silica) and the porous silica structure. Robocasting has demonstrated its flexibility in tailoring structural designs, combining nanopores and microchannels that exhibit uniform water transport delivery and thermal insulation. This portable device can be used immediately to collect fresh drinking water without an additional setup. It possesses a water evaporation rate of 2.4 kg m-2 h-1 with a drinking water production capacity of 0.5 L m-2 h-1. This novel device has shown excellent ion rejection ability, with the collected water meeting the World Health Organization (WHO) drinking water standards.

Tuning the Spin Density of Cobalt Single-Atom Catalysts for Efficient Oxygen Evolution.

Single-atom catalysts (SACs) with magnetic elements as the active center have been widely exploited for efficient electrochemical conversions. Understanding the catalytic role of spin, and thus modulating the spin density of a single-atom center, is of profound fundamental interest and technological impact. Here, we synthesized ferromagnetic single Co atom catalysts on TaS2 monolayers (Co1/TaS2) as a model system to explore the spin-activity correlation for the oxygen evolution reaction (OER). A single Co atom adsorbed at the hollow site (CoHS) with spin-polarized electronic states serves as the active site for OER, whose spin density can be regulated by its neighboring single Co site via tuning the Co loading. Both experimental and theoretical results reveal the spin density-dependent OER activity that an optimal spin density of CoHS can be achieved with a neighboring hetero-single CoTa site (substitution of Ta by Co) for a superior OER performance, in contrast to a homo-single CoHS site, which creates an excessive spin density over vicinal CoHS. An optimized spin density of CoHS results in an optimal binding energy of oxygen species for the OER. Establishing the spin-activity correlation in SACs may create a descriptor for designing efficient magnetic SACs for renewable energy conversions.

Printable two-dimensional superconducting monolayers.

Two-dimensional superconductor (2DSC) monolayers with non-centrosymmetry exhibit unconventional Ising pair superconductivity and an enhanced upper critical field beyond the Pauli paramagnetic limit, driving intense research interest. However, they are often susceptible to structural disorder and environmental oxidation, which destroy electronic coherence and provide technical challenges in the creation of artificial van der Waals heterostructures (vdWHs) for devices. Herein, we report a general and scalable synthesis of highly crystalline 2DSC monolayers via a mild electrochemical exfoliation method using flexible organic ammonium cations solvated with neutral solvent molecules as co-intercalants. Using NbSe2 as a model system, we achieved a high yield (>75%) of large-sized single-crystal monolayers up to 300 µm. The as-fabricated, twisted NbSe2 vdWHs demonstrate high stability, good interfacial properties and a critical current that is modulated by magnetic field when one flux quantum fits to an integer number of moiré cells. Additionally, formulated 2DSC inks can be exploited to fabricate wafer-scale 2D superconducting wire arrays and three-dimensional superconducting composites with desirable morphologies.

A Stable [4,3]Peri-acene Diradicaloid: Synthesis, Structure, and Electronic Properties.

The synthesis of peri-fused acenes (peri-acenes) with two or more rows is challenging due to their intrinsic open-shell diradical character. Herein, we report the isolation of a derivative (4) of [4,3]peri-acene in crystalline form. The parent [4,3]peri-acene, containing three rows of tetracene, has a large diradical character (y0 =94.8 %) originating from aromatic stabilization. Due to kinetic blocking, 4 showed a reasonable stability with a half-life time of ≈157 h under ambient conditions. Its structure was determined by X-ray crystallographic analysis, and bond-length analysis revealed eight localized Clar's sextets. 4 exhibited an open-shell singlet ground state with a narrow electrochemical energy gap (1.13 eV) and a small singlet-triplet energy gap (-0.57 kcal mol-1 from SQUID measurements). Its electronic properties are compared with previously reported peri-tetracene and teranthene derivatives.

S-shaped para-Quinodimethane-Embedded Double [6]Helicene and Its Charged Species Showing Open-Shell Diradical Character.

Helicenes and extended helical π-conjugated compounds have been widely studied, but most of the systems contain only aromatic benzene or heterocyclic rings, showing local aromatic character. Herein, new S-shaped double [6]helicene 1, which has two embedded para-quinodimethane (p-QDM) units, is reported. Due to the existence of a proaromatic quinoidal substructure, it has open-shell diradical character. Its model compound, C-shaped single [6]helicene 2 containing one p-QDM unit, was also synthesized and compared. Their ground-state structures and electronic properties were systematically studied by a combination of various experimental methods assisted by theoretical calculations. Compound 1 has a double-helical structure in the crystal, with the two terminal [6]helicene units bent in opposite directions (i.e., anti form). However, an anti/syn isomerization process with a moderate interconversion energy barrier was observed on the NMR timescale. Compound 1 shows amphoteric redox behavior. It also exhibits open-shell diradical character (y0 =12.1 %) and a small singlet-triplet gap. On the other hand, compound 2 has a typical closed-shell nature. The dication and dianion of 1 also show open-shell diradical character. The dianion of 2 and the tetraanion of 1 exhibit similar electronic structures to their respective isoelectronic structures, that is, [6]helicene and a double [6]helicene. This work provides some insights into the design and synthesis of stable helical π systems with open-shell diradical character and magnetic activity.

Imprinting Ferromagnetism and Superconductivity in Single Atomic Layers of Molecular Superlattices.

Ferromagnetism and superconductivity are two antagonistic phenomena since ferromagnetic exchange fields tend to destroy singlet Cooper pairs. Reconciliation of these two competing phases has been achieved in vertically stacked heterostructures where these two orders are confined in different layers. However, controllable integration of these two phases in one atomic layer is a longstanding challenge. Here, an interlayer-space-confined chemical design (ICCD) is reported for the synthesis of dilute single-atom-doped TaS2 molecular superlattice, whereby ferromagnetism is observed in the superconducting TaS2 layers. The intercalation of 2H-TaS2 crystal with bulky organic ammonium molecule expands its van der Waals gap for single-atom doping via co-intercalated cobalt ions, resulting in the formation of quasi-monolayer Co-doped TaS2 superlattices. Isolated Co atoms are decorated in the basal plane of the TaS2 via substituting the Ta atom or anchoring at a hollow site, wherein the orbital-selected p-d hybridization between Co and neighboring Ta and S atoms induces local magnetic moments with strong ferromagnetic coupling. This ICCD approach can be applied to various metal ions, enabling the synthesis of a series of crystal-size TaS2 molecular superlattices.

3D global aromaticity in a fully conjugated diradicaloid cage at different oxidation states.

Aromaticity is a vital concept that governs the electronic properties of π-conjugated organic molecules and has long been restricted to 2D systems. The aromaticity in 3D π-conjugated molecules has been rarely studied. Here we report a fully conjugated diradicaloid molecular cage and its global aromaticity at different oxidation states. The neutral compound has an open-shell singlet ground state with a dominant 38π monocyclic conjugation pathway and follows the [4n + 2] Hückel aromaticity rule; the dication has a triplet ground state with a dominant 36π monocyclic conjugation pathway and satisfies [4n] Baird aromaticity; the tetracation is an open-shell singlet with 52 π-electrons that are delocalized along the 3D rigid framework, showing 3D global antiaromaticity; and the hexacation possesses D3 symmetry with 50 globally delocalized π-electrons, showing [6n + 2] 3D global aromaticity. Different types of aromaticity were therefore accessed in one molecular cage platform, depending on the symmetry, number of π-electrons and spin state.

Formation of a four-bladed waterwheel-type chloro-bridged dicopper(ii) complex with dithiamacrocycle via double exo-coordination.

A combination of O3S2-macrocycles incorporating different sulfur-to-sulfur separations (S-(CH2)n-S, L1: n = 2, L2: n = 3) and copper(ii) nitrate afforded new types of both monocopper(ii) and dicopper(ii) complexes, respectively. L1 gave a 1D coordination polymer [Cu2(L1)2(NO3)4]n (1) based on a convergent exo-coordination mode while L2 resulted in the formation of a divergent exo/exo-coordinated dicopper(ii) complex, [Cu2(L2ox)4(µ-Cl)](NO3)4 (2), whose shape resembles a four-bladed waterwheel in which in situ oxidized macrocycles (L2ox) act as the blades and a CuII-(µ-Cl)-CuII entity corresponds to the axle shaft. The chloro-bridging ligand is derived from the dichloromethane solvent and its arrangement is held together by C-HCl- H-bonds. Compound 2 shows a weak antiferromagnetic property via the CuII-(µ-Cl)-CuII entity.

Chemically Exfoliated VSe2 Monolayers with Room-Temperature Ferromagnetism.

Among van der Waals layered ferromagnets, monolayer vanadium diselenide (VSe2 ) stands out due to its robust ferromagnetism. However, the exfoliation of monolayer VSe2 is challenging, not least because the monolayer flake is extremely unstable in air. Using an electrochemical exfoliation approach with organic cations as the intercalants, monolayer 1T-VSe2 flakes are successfully obtained from the bulk crystal at high yield. Thiol molecules are further introduced onto the VSe2 surface to passivate the exfoliated flakes, which improves the air stability of the flakes for subsequent characterizations. Room-temperature ferromagnetism is confirmed on the exfoliated 2D VSe2 flakes using a superconducting quantum interference device (SQUID), X-ray magnetic circular dichroism (XMCD), and magnetic force microscopy (MFM), where the monolayer flake displays the strongest ferromagnetic properties. Se vacancies, which can be ubiquitous in such materials, also contribute to the ferromagnetism of VSe2 , although density functional theory (DFT) calculations show that such effect can be minimized by physisorbed oxygen molecules or covalently bound thiol molecules.

GO-Functionalized Large Magnetic Iron Oxide Nanoparticles with Enhanced Colloidal Stability and Hyperthermia Performance.

Because of their high magnetization and suitable biocompatibility, iron-oxide nanoparticles (IONPs) have been widely employed in various biomedical applications, including magnetic hyperthermia for cancer treatment. In many cases, the colloidal stability requirement will limit the usage of ferromagnetic particles that are usually associated with good magnetic response. To address this challenge, a stable carrier for better colloidal stability regardless of the size or shape of the IONPs while at the same time providing enhanced magnetic hyperthermia heating performance is required. In this work, IONPs of different sizes (4, 8, 20, 45, and 250 nm) were engineered to reside in the graphene oxide (GO) sheet carrier, which were stable in aqueous solution even in the presence of a strong magnetic field. Out of various IONPs sizes, highest specific absorption rate (SAR) value of 5020 W g-1 was obtained with 45 nm GO-IONPs nanocomposites at a frequency and alternating magnetic field of 400 kHz and 32.5 kA m-1, respectively. The calculated intrinsic loss power (ILP) was 12.21 nH m2 kg-1, which is one of the highest ILP values reported for synthesized IONPs to the best of our knowledge. To enhance the excellent colloidal stability in biological environment, the GO-IONPs nanocomposites can be further grafted with polyethylene glycol (PEG) because agglomeration of pristine GO sheets occurs because of adsorption of cations. High ILP values could be well maintained even after PEG coating. The PEGylated 45 nm GO-IONP showed excellent antitumor efficacy in 4T1-tumor model mice by inhibiting tumor progression within a safe dosage range. Overall, the novel nanocomposite in this work-PEG-GO-IONP-possesses high hyperthermia performance, excellent colloidal stability in biological environment, and availability of functional groups in GO and can be utilized for tagging in various biomedical applications.

Metallization of 3D Printed Polymers and Their Application as a Fully Functional Water-Splitting System.

In this work, the plating of high-quality amorphous nickel-phosphorous coating with low resistivity of 0.45 µΩ m (298 K) on complex 3D printed polymeric structures with high uniformity is reported. Such a polymer metallization results in an effective conductivity of 4.7 × 104 S m-1. This process also allows flexible structures to maintain their flexibility along with the conductivity. Octet-truss structures with nickel-iron-(oxo) hydroxide nanosheets electrodeposited onto further displays excellent water-splitting performance as catalytic electrodes, i.e., in KOH (1 m, aq), a low oxygen evolution reaction (OER) overpotential of 197 mV at 10 mA cm-2 and Tafel slope of 51 mV dec-1. Using this light-weight electrode with high specific area, strength, and corrosion resistance properties, a fully functional water-splitting system is designed and fabricated through the concentric integration of 3D printed components. A dense polymeric mesh implemented is also demonstrated as an effective separator of hydrogen and oxygen bubbles in this system.

Evidence of Spin Frustration in a Vanadium Diselenide Monolayer Magnet.

Monolayer VSe2 , featuring both charge density wave and magnetism phenomena, represents a unique van der Waals magnet in the family of metallic 2D transition-metal dichalcogenides (2D-TMDs). Herein, by means of in situ microscopy and spectroscopic techniques, including scanning tunneling microscopy/spectroscopy, synchrotron X-ray and angle-resolved photoemission, and X-ray absorption, direct spectroscopic signatures are established, that identify the metallic 1T-phase and vanadium 3d1 electronic configuration in monolayer VSe2 grown on graphite by molecular-beam epitaxy. Element-specific X-ray magnetic circular dichroism, complemented with magnetic susceptibility measurements, further reveals monolayer VSe2 as a frustrated magnet, with its spins exhibiting subtle correlations, albeit in the absence of a long-range magnetic order down to 2 K and up to a 7 T magnetic field. This observation is attributed to the relative stability of the ferromagnetic and antiferromagnetic ground states, arising from its atomic-scale structural features, such as rotational disorders and edges. The results of this study extend the current understanding of metallic 2D-TMDs in the search for exotic low-dimensional quantum phenomena, and stimulate further theoretical and experimental studies on van der Waals monolayer magnets.

High-Magnetization Tetragonal Ferrite-Based Films Induced by Carbon and Oxygen Vacancy Pairs.

Herein, a low-temperature thermal decomposition method is utilized to grow new stable tetragonal Fe3O4-based thick ferrite films. The tetragonal Fe3O4-based film possesses high saturation magnetization of ∼800 emu/cm3. Doping with approximately 10% Co results in a high-energy product of ∼10.9 MGOe with perpendicular magnetocrystalline anisotropy, whereas doping with Ni increases electrical resistivity by a factor of 6 and retains excellent soft magnetic properties (high saturation magnetization and low coercivity). A combined experimental and first-principles study reveals that carbon interstitials (CiB) and oxygen vacancies (VO) form CiB-VO pairs which stabilize the tetragonal phase and enhance saturation magnetization. The magnetization enhancement is further attributed to local ferromagnetic coupling between FeA and FeB induced by CiB-VO pairs in a tetragonal spinel ferrite lattice.

Diazuleno-s-indacene Diradicaloids: Syntheses, Properties, and Local (anti)Aromaticity Shift from Neutral to Dicationic State.

Non-alternant, non-benzenoid π-conjugated polycyclic hydrocarbons (PHs) are expected to exhibit very different electronic properties from all-benzenoid PHs. Reported herein are the syntheses and physical properties of four derivatives of two azulene-fused s-indacene isomers, the diazuleno[2,1-a:2',1'-g]-s-indacene (DAI-1) and diazuleno[2,1-a:1',2'-h]-s-indacene (DAI-2). The backbone of both isomers contains 28π electrons and is a 7-5-5-6-5-5-7 fused ring system. X-ray crystallographic analysis, NMR spectra, and theoretical calculations (ACID, NICS) reveal a structure with two aromatic azulene units fused with a central anti-aromatic s-indacene moiety. All compounds exhibit open-shell diradical character and are magnetically active, but the derivatives of DAI-2 show larger radical character than the respective ones of DAI-1. Their dications were isolated in crystalline form and all experimental and theoretical analyses disclose a shift of local (anti)aromaticity along the backbone, with two aromatic tropylium rings at the termini.

Superoctazethrene: An Open-Shell Graphene-like Molecule Possessing Large Diradical Character but Still with Reasonable Stability.

Laterally extended zethrenes can be regarded as Z-shaped nanographenes with four zigzag edges, but their synthesis is very challenging. Herein, we report the successful synthesis of by far the largest zethrene molecule, a superoctazethrene (SOZ) derivative SOZ-Cl, in crystalline form. Although the parent SOZ is calculated to have a very large diradical character ( y0 = 81.0%), SOZ-Cl shows reasonable stability ( t1/2 = 64 h under ambient conditions) and can be purified by silica gel column chromatography. It exhibits a small electrochemical energy gap ( Eg = 1.01 eV) and characteristics for open-shell singlet diradicaloids. Compared with a previously reported octazethrene derivative (OZ-TIPS), SOZ-Cl shows much larger diradical character ( y0 = 76.3% vs 43.4%) and smaller singlet-triplet gap (Δ ES-T = -2.30 kcal/mol vs -3.87 kcal/mol). Calculations also demonstrate global aromatic character of SOZ, but the smaller size octazethrene shows local aromaticity.

Stable Expanded Porphycene-Based Diradicaloid and Tetraradicaloid.

The synthesis of a bithiophene-bridged 34π conjugated aromatic expanded porphycene 1 and a cyclopentabithiophene bridged 32π conjugated anti-aromatic expanded porphycene 2 by a McMurry coupling strategy is presented. Magnetic measurements and theoretical calculations reveal that both 1 and 2 exhibit an open-shell singlet ground state with significant radical character (y0 =0.63 for 1; y0 =0.68, y1 =0.18 for 2; y0 : diradical character, y1 : tetraradical character) and a small singlet-triplet energy gap (ΔES-T =-3.25 kcal mol-1 for 1 and ΔES-T =-0.92 kcal mol-1 for 2). Despite the open-shell radical character, both compounds display exceptional stability under ambient air and light conditions owing to effective delocalization of unpaired electrons in the extended cyclic π-conjugation pathway.

Global Aromaticity in Macrocyclic Cyclopenta-Fused Tetraphenanthrenylene Tetraradicaloid and Its Charged Species.

A stable cyclopenta-fused tetraphenanthrenylene macrocycle, CPTP-M, was synthesized, and the structure was confirmed by X-ray crystallographic analysis. It exhibits a large radical character (number of unpaired electron, NU =3.52) and a small singlet-triplet energy gap (ΔES-T =-2.8 kcal mol-1 by SQUID). Its backbone contains 60 ([4n]) conjugated π electrons and is globally antiaromatic. NMR measurements and theoretical calculations revealed that its dication/dianion is globally aromatic owing to the existence of [4n-2]/[4n+2] π-conjugated electrons. Remarkably, the ring-current map of the tetraanion shows a unique ring-in-ring structure, with a diamagnetic outer ring and a paramagnetic inner ring. Accordingly, both the inner-rim and outer-rim protons are deshielded in its 1 H NMR spectrum. The tetraanion can be regarded as an isoelectronic structure of the known octulene, which shows similar electronic properties.

Curved π-conjugated corannulene dimer diradicaloids.

So far, most reported open-shell singlet diradicaloids are based on planar π-conjugated molecules. Herein, we report the bridged corannulene dimer diradicaloids, Cor-D1 and Cor-D2, both showing a three-dimensional curved π-conjugated structure. Cor-D1 has a small diradical character (y0 = 5.4%) and behaves more like a closed-shell quinoidal compound at room temperature, while Cor-D2 is a typical open-shell diradicaloid with a larger diradical character (y0 = 16.9%). Both compounds exhibited paramagnetic activity at elevated temperatures, with a singlet-triplet energy gap (ΔES-T) of -8.4 and -3.0 kcal mol-1, respectively. X-ray crystallographic analysis revealed that both molecules have a dumbbell-shaped geometry, with the two terminal corannulene bowls bent to opposite directions. The spin is largely delocalized onto the two bowls in Cor-D2 and there are multiple [CH···π] interactions between the neighboring bowls. Chemical oxidation/reduction to their respective dications/dianions results in global aromaticity with [4n + 2] π-electrons delocalized through the periphery of the whole framework.

A Peri-tetracene Diradicaloid: Synthesis and Properties.

Peri-acenes are good model compounds for zigzag graphene nanoribbons, but their synthesis is extremely challenging owing to their intrinsic open-shell diradical character. Now, the successful synthesis and isolation of a stable peri-tetracene derivative PT-2ClPh is reported; four 2,6-dichlorophenyl groups are attached onto the most reactive sites along the zigzag edges. The structure was confirmed by X-ray crystallographic analysis and its electronic properties were systematically investigated by both experiments and theoretical calculations. It exhibits an open-shell singlet ground state with a moderate diradical character (y0 =51.5 % by calculation) and a small singlet-triplet gap (ΔES-T =-2.5 kcal mol-1 by SQUID measurement). It displays global aromatic character, which is different from the smaller-size bisanthene analogue BA-CF3.

Toward Two-Dimensional π-Conjugated Covalent Organic Radical Frameworks.

Reported is the synthesis, characterization, and material properties of the first π-conjugated two-dimensional covalent organic radical framework (CORF), PTM-CORF, based on the stable polychlorotriphenylmethyl (PTM) radical. The covalent organic framework (COF) precursor (PTM-H-COF) was first synthesized by liquid/liquid interfacial acetylenic homocoupling of a triethynylpolychlorotriphenylmethane monomer, and showed crystalline features with a hexagonal diffraction pattern matching that of A-B-C stacking. Subsequent deprotonation and oxidation of the PTM units in PTM-H-COF gave PTM-CORF. Magnetic measurements revealed that the neighboring PTM radicals in the PTM-CORF are anti-ferromagnetically coupled each other, with a moderate exchange interaction (J=-375 cm-1 ). The PTM-CORF has a small energy gap (ca. 0.88 eV) and a low-lying LUMO energy level (-4.72 eV), and exhibits high electrocatalytic activity and durability toward the oxygen reduction reaction.