Green silver nanoparticles: Prospective nanotools against neurodegenerative cell line model.

Neurodegenerative diseases represent an increasingly burdensome challenge of the past decade, primarily driven by the global aging of the population. Ongoing efforts focus on implementing diverse strategies to mitigate the adverse effects of neurodegeneration, with the goal of decelerating the pathology progression. Notably, in recent years, it has emerged that the use of nanoparticles (NPs), particularly those obtained through green chemical processes, could constitute a promising therapeutic approach. Green NPs, exclusively sourced from phytochemicals, are deemed safer compared to NPs synthetized through conventional chemical route. In this study, the effects of green chemistry-derived silver NPs (AgNPs) were assessed in neuroblastoma cells, SHSY-5Y, which are considered a pivotal model for investigating neurodegenerative diseases. Specifically, we used two different concentrations (0.5 and 1 µM) of AgNPs and two time points (24 and 48 h) to evaluate the impact on neuroblastoma cells by observing viability reduction and intracellular calcium production, especially using 1 µM at 48 h. Furthermore, investigation using atomic force microscopy (AFM) unveiled an alteration in Young's modulus due to the reorganization of cortical actin following exposure to green AgNPs. This evidence was further corroborated by confocal microscopy acquisitions as well as coherency and density analyses on actin fibers. Our in vitro findings suggest the potential efficacy of green AgNPs against neurodegeneration; therefore, further in vivo studies are imperative to optimize possible therapeutic protocols.

Test-retest reliability of putting-related variables in medium-to-high handicap golf players.

This manuscript aims to study the reliability of different variables related to performance and acceleration during the golf putt in players with medium-to-high handicaps and to determine the number of attempts necessary to find reliable values for these variables. Eight males and two females [55.67 (13.64) years, 78.4 (11.4) kg, 1.75 (7.95) m] participated in two experimental sessions separated by one week. In these sessions, they performed three blocks of 10 putts trying to stop the golf ball at the center of a dartboard painted 2 m away. The performance was assessed depending on the area of the dartboard where the ball stopped, and the acceleration signals were acquired using the Xsens Dot. The results showed that to evaluate performance, 18 trials were necessary to reach reliable values using the 0-10 scoring system, and 28 trials were necessary for the 0-3 scoring system. Regarding the reliability of the accelerometer-related variables, 7 attempts were necessary to obtain good-to-excellent reliability values for most of the variables. It could be concluded that putting in medium-to-high handicap golf players can be reliably measured using the abovementioned protocol.

Microplastics role in cell migration and distribution during cancer cell division.

Amidst the global plastic pollution crisis, the gastrointestinal tract serves as the primary entry point for daily exposure to micro- and nanoplastics. We investigated the complex dynamics between polystyrene micro- and nanoplastics (PS-MNPs) and four distinct human colorectal cancer cell lines (HT29, HCT116, SW480, and SW620). Our findings revealed a significant size- and concentration dependent uptake of 0.25, 1, and 10 µm PS-MNPs across all cell lines, with HCT116 cells exhibiting the highest uptake rates. During cell division, particles were distributed between mother and daughter cells. Interestingly, we observed no signs of elimination from the cells. Short-term exposure to 0.25 µm particles significantly amplified cell migration, potentially leading to pro-metastatic effects. Particles demonstrated high persistence in 2D and 3D cultures, and accumulation in non-proliferating parts of spheroids, without interfering with cell proliferation or division. Our study unveils the disturbing fact of the persistence and bioaccumulation of MNPs in colorectal cancer cell lines, key toxicological traits under REACH (Regulation concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals). Our observations underscore the potential of MNPs as hidden catalysts for tumor progression, particularly through enhancing cell migration and possibly fueling metastasis - a finding that sheds light on a significant and previously underexplored area of concern.

Understanding the mechanism of polyethyleneimine-mediated cell disintegration and protein extraction in E. coli: The role of floc network formation and PEI molecular weight.

Cell disintegration and protein extraction are crucial steps in downstream process development for biopharmaceuticals produced in E. coli. In this study, we explored the extraction mechanism of polyethyleneimine (PEI) at the cellular level and characterized the floc network that is formed upon PEI addition by Focused Beam Reflectance Measurement and Dispersion Analyzer. PEI disintegrates the cells by detachment of the outer membrane allowing protein to diffuse into the interspace of the flocs. Protein release into the supernatant occurs by diffusion out of the floc network. We could show that the type and concentrations of PEIs with varying molecular weight determines the floc properties and thus the extraction efficiency. We could demonstrate why optimal conditions, using 70 kDa PEI at 0.25 g/g cell dry mass, lead to efficient extraction while at suboptimal conditions extraction is almost negligible. Our findings provide valuable insights into the relationship between floc properties and PEI-driven protein extraction, with potential applications in bioprocessing and biotechnology.

Unraveling Complex Hysteresis Phenomenon in 1,2-Dipalmitoyl-sn-Glycero-3-Phosphocholine Monolayer: Insight into Factors Influencing Surface Dynamics.

This study explores the hysteresis phenomenon in DPPC (1,2-dipalmitoyl-sn-glycero-3-phosphocholine) monolayers, considering several variables, including temperature, compression and expansion rates, residence time, and subphase content. The investigation focuses on analyzing the influence of these variables on key indicators such as the π-A isotherm curve, loop area, and compression modulus. By employing the Langmuir-Blodgett technique, the findings reveal that all the examined factors significantly affect the aforementioned parameters. Notably, the hysteresis loop, representing dissipated energy, provides valuable insights into the monolayer's viscoelasticity, molecular packing, phase transition changes, and resistance during the isocycle process. These findings contribute to a comprehensive understanding of the structural and dynamic properties of DPPC monolayers, offering insights into their behavior under varying conditions. Moreover, the knowledge gained from this study can aid in the development of precise models and strategies for controlling and manipulating monolayer properties, with potential applications in drug delivery systems, surface coatings, as well as further investigation into air penetration into alveoli and the blinking mechanism.

Calcium Carbonate Urolithiasis in a Pediatric Patient: A Case Report.

Urinary stones composed of calcium carbonate are extremely rare, accounting for 0.01%-1.4% of urolithiasis (UL) cases. Urolithiasis is an infrequent condition in the pediatric population worldwide and in Mexico; nevertheless, the incidence in the Yucatán Peninsula is higher than that reported in other areas of Mexico and the world. Urolithiasis is the second most common urinary disease among pediatrics in the Yucatán Peninsula, which makes it an endemic region for this disease. We describe the case of a five-year-old male from the southeast region of Mexico who presented with signs and symptoms of urinary tract infection (UTI) and was diagnosed with bilateral staghorn stones of calcium carbonate, successfully treated by mini endoscopic combined intra-renal surgery, and dietary adjustments to prevent recurrence.

Presence of methanogenic archaea in necrotic root canals of patients with or without type 2 diabetes mellitus.

Theoretically, a necrotic root canal fulfils all requirements as a niche for methanogens to inhabit. However, their presence in it and its implication in apical periodontitis (AP) is controversial. Therefore, to contribute to ending the controversy, this study aimed to detect and compare methanogens' presence in two distinct niches with supposedly different microenvironments; both were necrotic root canals associated with AP but one from patients with type 2 diabetes mellitus (T2DM) while the other from non-diabetic patients. A clinical examination was performed on 65 T2DM patients and 73 non-diabetic controls. Samples from necrotic root canals were obtained, and methanogens were identified. The presence of methanogens was three times higher (27.6%) in the T2DM group than in non-diabetic patients (8.2%). In addition, methanogens' presence was associated with a higher prevalence of periapical symptoms.

Characterization of Breast Cancer Aggressiveness by Cell Mechanics.

In healthy tissues, cells are in mechanical homeostasis. During cancer progression, this equilibrium is disrupted. Cancer cells alter their mechanical phenotype to a softer and more fluid-like one than that of healthy cells. This is connected to cytoskeletal remodeling, changed adhesion properties, faster cell proliferation and increased cell motility. In this work, we investigated the mechanical properties of breast cancer cells representative of different breast cancer subtypes, using MCF-7, tamoxifen-resistant MCF-7, MCF10A and MDA-MB-231 cells. We derived viscoelastic properties from atomic force microscopy force spectroscopy measurements and showed that the mechanical properties of the cells are associated with cancer cell malignancy. MCF10A are the stiffest and least fluid-like cells, while tamoxifen-resistant MCF-7 cells are the softest ones. MCF-7 and MDA-MB-231 show an intermediate mechanical phenotype. Confocal fluorescence microscopy on cytoskeletal elements shows differences in actin network organization, as well as changes in focal adhesion localization. These findings provide further evidence of distinct changes in the mechanical properties of cancer cells compared to healthy cells and add to the present understanding of the complex alterations involved in tumorigenesis.

Measuring (biological) materials mechanics with atomic force microscopy. 5. Traction force microscopy (cell traction forces).

Cells generate traction forces to probe the mechanical properties of the surroundings and maintain a basal equilibrium state of stress. Traction forces are also implicated in cell migration, adhesion and ECM remodeling, and alteration of these forces is often observed in pathologies such as cancer. Thus, analyzing the traction forces is important for studies of cell mechanics in cancer and metastasis. In this primer, the methodology for conducting two-dimensional traction force microscopy (2D-TFM) experiments is reported. As a practical example, we analyzed the traction forces generated by three human breast cancer cell lines of different metastatic potential: MCF10-A, MCF-7 and MDA-MB-231 cells, and studied the effects of actin cytoskeleton disruption on those traction forces. Contrary to what is often reported in literature, lower traction forces were observed in cells with higher metastatic potential (MDA-MB-231). Implications of substrate stiffness and concentration of extracellular matrix proteins in such findings are discussed in the text. RESEARCH HIGHLIGHTS: Traction force microscopy (TFM) is suitable for studying and quantifying cell-substrate and cell-cell forces. TFM is suitable for investigating the relationship between chemical to mechanical signal transduction and vice versa. TFM can be combined with classical indentation studies providing a compact picture of cell mechanics. TFM still needs new physico-chemical (sample preparation) and computational approaches for more accurate data evaluation.

Application of self-organizing maps to AFM-based viscoelastic characterization of breast cancer cell mechanics.

Cell mechanical properties have been proposed as label free markers for diagnostic purposes in diseases such as cancer. Cancer cells show altered mechanical phenotypes compared to their healthy counterparts. Atomic Force Microscopy (AFM) is a widely utilized tool to study cell mechanics. These measurements often need skilful users, physical modelling of mechanical properties and expertise in data interpretation. Together with the need to perform many measurements for statistical significance and to probe wide enough areas in tissue structures, the application of machine learning and artificial neural network techniques to automatically classify AFM datasets has received interest recently. We propose the use of self-organizing maps (SOMs) as unsupervised artificial neural network applied to mechanical measurements performed via AFM on epithelial breast cancer cells treated with different substances that affect estrogen receptor signalling. We show changes in mechanical properties due to treatments, as estrogen softened the cells, while resveratrol led to an increase in cell stiffness and viscosity. These data were then used as input for SOMs. Our approach was able to distinguish between estrogen treated, control and resveratrol treated cells in an unsupervised manner. In addition, the maps enabled investigation of the relationship of the input variables.

Mutation of a Threonine Residue in αD-ß4 Loop of Cyt2Aa2 Protein Influences Binding on Fluid Lipid Membranes.

Cyt proteins are insecticidal proteins originally from Bacillus thuringiensis. The lipid binding of the Cyt2Aa2 protein depends on the phase of the lipid bilayer. In this work, the importance of the conserved T144 residue in the αD-ß4 loop for lipid binding on fluid lipid membranes was investigated via atomic force microscopy (AFM). Lipid membrane fluidity could be monitored for the following lipid mixture systems: POPC/DPPC, POPC/SM, and DOPC/SM. AFM results revealed that the T144A mutant was unable to bind to pure POPC bilayers. Similar topography between the wildtype and T144A mutant was seen for the POPC/Chol system. Small aggregates of T144A mutant were observed in the POPC and DOPC domains of the lipid mixture systems. In addition, the T144A mutant had no cytotoxic effect against human colon cancer cells. These results suggest that alanine replacement into threonine 144 hinders the binding of Cyt2Aa2 on liquid lipid membranes. These observations provide a possibility to modify the Cyt2Aa2 protein to specific cells via lipid phase selection.

Recombinant Peptide Production Softens Escherichia coli Cells and Increases Their Size during C-Limited Fed-Batch Cultivation.

Stress-associated changes in the mechanical properties at the single-cell level of Escherichia coli (E. coli) cultures in bioreactors are still poorly investigated. In our study, we compared peptide-producing and non-producing BL21(DE3) cells in a fed-batch cultivation with tightly controlled process parameters. The cell growth, peptide content, and cell lysis were analysed, and changes in the mechanical properties were investigated using atomic force microscopy. Recombinant-tagged somatostatin-28 was expressed as soluble up to 197 ± 11 mg g-1. The length of both cultivated strains increased throughout the cultivation by up to 17.6%, with nearly constant diameters. The peptide-producing cells were significantly softer than the non-producers throughout the cultivation, and respective Young's moduli decreased by up to 57% over time. A minimum Young's modulus of 1.6 MPa was observed after 23 h of the fed-batch. Furthermore, an analysis of the viscoelastic properties revealed that peptide-producing BL21(DE3) appeared more fluid-like and softer than the non-producing reference. For the first time, we provide evidence that the physical properties (i.e., the mechanical properties) on the single-cell level are significantly influenced by the metabolic burden imposed by the recombinant peptide expression and C-limitation in bioreactors.

A Giant Kidney Stone in a 50-Year-Old Mayan Gardener From the Yucatan Peninsula: A Case Report.

Urolithiasis is a prevalent urological condition characterized by stone formation in the urinary tract, but stones weighing more than 100 g are rare. The Mayan and Mestizo populations in Yucatan have been identified as being at an increased risk of urolithiasis because of the coexistence of environmental, genetic, metabolic, and lifestyle risk factors. The patient's occupation may play a significant role in enhancing these factors. Here, we report the case of a Mayan gardener with a giant kidney stone weighing 1,154 g, one of the largest ever reported from Mexico.

Power Laws Describe Bacterial Viscoelasticity.

Bacterial cells survive in a wide range of different environments and actively tune their mechanical properties for purposes of growth, movement, division, and nutrition. In Gram-negative bacteria, the cell envelope with its outer membrane and peptidoglycan are the main determinants of mechanical properties and are common targets for the use of antibiotics. The study of bacterial mechanical properties has shown promise in elucidating a structure-function relationship in bacteria, connecting, shape, mechanics, and biochemistry. In this work, we study frequency and time-dependent viscoelastic properties of E. coli cells by atomic force microscopy (AFM). We perform force cycles, oscillatory microrheology, stress relaxation, and creep experiments, and use power law rheology models to fit the experimental results. All data sets could be fitted with the models and provided power law exponents of 0.01 to 0.1 while showing moduli in the range of a few MPa. We provide evidence for the interchangeability of the properties derived from these four different measurement approaches.

Partial RAG deficiency in humans induces dysregulated peripheral lymphocyte development and humoral tolerance defect with accumulation of T-bet+ B cells.

The recombination-activating genes (RAG) 1 and 2 are indispensable for diversifying the primary B cell receptor repertoire and pruning self-reactive clones via receptor editing in the bone marrow; however, the impact of RAG1/RAG2 on peripheral tolerance is unknown. Partial RAG deficiency (pRD) manifesting with late-onset immune dysregulation represents an 'experiment of nature' to explore this conundrum. By studying B cell development and subset-specific repertoires in pRD, we demonstrate that reduced RAG activity impinges on peripheral tolerance through the generation of a restricted primary B cell repertoire, persistent antigenic stimulation and an inflammatory milieu with elevated B cell-activating factor. This unique environment gradually provokes profound B cell dysregulation with widespread activation, remarkable extrafollicular maturation and persistence, expansion and somatic diversification of self-reactive clones. Through the model of pRD, we reveal a RAG-dependent 'domino effect' that impacts stringency of tolerance and B cell fate in the periphery.

Measuring biological materials mechanics with atomic force microscopy - Determination of viscoelastic cell properties from stress relaxation experiments.

Cells are complex, viscoelastic bodies. Their mechanical properties are defined by the arrangement of semiflexible cytoskeletal fibers, their crosslinking, and the active remodeling of the cytoskeletal network. Atomic force microscopy (AFM) is an often-used technique for the study of cell mechanics, enabling time- and frequency-dependent measurements with nanometer resolution. Cells exhibit time-dependent deformation when stress is applied. In this work, we have investigated the stress relaxation of HeLa cells when subjected to a constant strain. We have varied the applied force (1, 2, 4, and 8 nN) and pause time (1, 10, and 60 s) to check for common assumptions for the use of models of linear viscoelasticity. Then, we have applied three models (standard linear solid, five element Maxwell, power law rheology) to study their suitability to fit the datasets. We show that the five element Maxwell model captures the stress relaxation response the best while still retaining a low number of free variables. This work serves as an introduction and guide when performing stress relaxation experiments on soft matter using AFM. RESEARCH HIGHLIGHTS: Cells exhibit linear viscoelastic properties when subjected to stress relaxation measurements at the studied different forces and times. The stress relaxation is best described by a five element Maxwell model. All three used models capture a softening and fluidization of cells when disrupting actin filaments.

Measuring biological materials mechanics with atomic force microscopy - Mechanical unfolding of biopolymers.

Biopolymers, such as polynucleotides, polypeptides and polysaccharides, are macromolecules that direct most of the functions in living beings. Studying the mechanical unfolding of biopolymers provides important information about their molecular elasticity and mechanical stability, as well as their energy landscape, which is especially important in proteins, since their three-dimensional structure is essential for their correct activity. In this primer, we present how to study the mechanical properties of proteins with atomic force microscopy and how to obtain information about their stability and energetic landscape. In particular, we discuss the preparation of polyprotein constructs suitable for AFM single molecule force spectroscopy (SMFS), describe the parameters used in our force-extension SMFS experiments and the models and equations employed in the analysis of the data. As a practical example, we show the effect of the temperature on the unfolding force, the distance to the transition state, the unfolding rate at zero force, the height of the transition state barrier, and the spring constant of the protein for a construct containing nine repeats of the I27 domain from the muscle protein titin. HIGHLIGHTS: 1. Atomic force microscopy (AFM) can be used to study the mechanical unfolding of polymers. 2. AFM provides a direct measurement of unfolding (unbinding) forces. 3. Force measurements for different rates provide information about the distance to the transition state and the unfolding rate at zero force.

A-to-I RNA editing of Filamin A regulates cellular adhesion, migration and mechanical properties.

A-to-I RNA editing by ADARs is an abundant epitranscriptomic RNA-modification in metazoa. In mammals, Flna pre-mRNA harbours a single conserved A-to-I RNA editing site that introduces a Q-to-R amino acid change in Ig repeat 22 of the encoded protein. Previously, we showed that FLNA editing regulates smooth muscle contraction in the cardiovascular system and affects cardiac health. The present study investigates how ADAR2-mediated A-to-I RNA editing of Flna affects actin crosslinking, cell mechanics, cellular adhesion and cell migration. Cellular assays and AFM measurements demonstrate that the edited version of FLNA increases cellular stiffness and adhesion but impairs cell migration in both, mouse fibroblasts and human tumour cells. In vitro, edited FLNA leads to increased actin crosslinking, forming actin gels of higher stress resistance. Our study shows that Flna RNA editing is a novel regulator of cytoskeletal organisation, affecting the mechanical property and mechanotransduction of cells.

Measuring Mechanical Properties of Breast Cancer Cells with Atomic Force Microscopy.

Using physical models to describe the response of cells to external stimuli has grown popular in the last three decades. The mechanical properties of cells are tightly linked to biochemical signaling pathways related to cell structure, proliferation, differentiation, motility, and cell fate. This chapter aims to describe how to perform mechanical experiments on MCF-7 breast cancer cells using the atomic force microscope. We present a stepwise procedure on sample preparation, force spectroscopy measurements and a guide on data evaluation using standard rheological models. We demonstrate how to derive all viscoelastic parameters of the cell by conducting stress relaxation and creep experiments. Additionally, the reader can find a sample dataset and the code required for data evaluation.

Substrate stiffness modulates the viscoelastic properties of MCF-7 cells.

Cells sense stiffness of surrounding tissues and adapt their activity, proliferation, motility and mechanical properties based on such interactions. Cells probe the stiffness of the substrate by anchoring and pulling to their surroundings, transmitting force to the extracellular matrix and other cells, and respond to the resistance they sense, mainly through changes in their cytoskeleton. Cancer and other diseases alter stiffness of tissues, and the response of cancer cells to this stiffness can also be affected. In the present study we show that MCF-7 breast cancer cells seeded on polyacrylamide gels have the ability to detect the stiffness of the substrate and alter their mechanical properties in response. MCF-7 cells plated on soft substrates display lower stiffness and viscosity when compared to those seeded on stiffer gels or glass. These differences can be associated with differences in the morphology and cytoskeleton organisation, since cells seeded on soft substrates have a round morphology, while cells seeded on stiffer substrates acquire a flat and spread morphology with formation of actin filaments, similar to that observed when seeded on glass. These findings show that MCF-7 cells can detect the stiffness of the surrounding microenvironment and thus, modify their mechanical properties.