In-Vitro Tooth Cleaning Efficacy and Filament End Rounding of Different Manual Children's Toothbrushes.

PURPOSE: This in-vitro study aimed to investigate the cleaning efficacy of 18 different manual children's toothbrushes applying horizontal, vertical, and rotational movements, as well as to evaluate the rounding of their filament ends. MATERIALS AND METHODS: Models equipped with artificial teeth (coated with titanium dioxide) were brushed using a brushing machine with clamped manual children's toothbrushes. The machine carried out horizontal, vertical, and rotational movements for 1 min with a constant contact pressure of 100 g. The percentage of the area of titanium dioxide removed from the buccal, mesial, distal and total surfaces of the artificial teeth corresponded to the cleaning efficacy. To assess the filament design, a scanning electron microscope was used to check the morphology of the filaments which was scored with Silverstone and Featherstone scale. SPSS 22 was used for data analysis. RESULTS: The rotational and the vertical movements achieved the best cleaning efficacy with all tested toothbrushes. The vast majority of the tested toothbrushes had their poorest cleaning efficacy in the horizontal movement. Only a small part of the children's toothbrushes (3 out of 18) had a correct and acceptable proportion of rounded bristle ends. CONCLUSIONS: Based on the present results, it could be concluded that the cleaning efficacy of different manual children's toothbrushes varied considerably. The best cleaning efficacy was almost always observed for rotational and vertical movements.

Cleaning performance of electric toothbrushes around brackets applying different brushing forces: an in-vitro study.

Throughout treatment with fixed orthodontic appliances, effective plaque control is crucial to maintaining dental health. This in-vitro study evaluated the cleaning performance of eleven different brush heads of seven electric toothbrushes (oscillating-rotating and sonic motions) and varying brushing forces around orthodontic brackets. Six Mini Diamond® Twin brackets were placed on black-stained front teeth. Teeth were coated with white titanium oxide and brushed in a machine six times for one minute with two different brushing forces (1 N and 1.5 N). Eleven different brush heads were evaluated (either oscillating-rotating or sonic movements). The teeth were scanned and planimetrically evaluated after brushing. Three detailed plaque areas (DPAs) were created: proximal (< 1 mm to bracket), mid-tier (1-2 mm to bracket), and distant (> 2 mm to bracket). The proportion of contaminated proximal, mid-tier, and distant surfaces (white regions) in relation to the respective DPA was calculated. Independent of brushing forces, places with a higher distance (> 2 mm) to the orthodontic bracket had the least amount of residual contamination, followed by areas with a minor (1-2 mm) and proximal distance (< 1 mm). In all of the brushes tested and for both estimated brushing forces, the region with the highest residual contamination was the proximal area. The brush heads of the Paro® Sonic toothbrush left the least amount of residual contamination. The cleaning performance of electric toothbrushes around brackets on upper incisors varied across the brushes examined. The proximal area has the most residual contamination. Furthermore, 9 out of 11 toothbrushes cleaned more successfully with 1.5 N than with 1 N brushing force.

Genetic and environmental impact on mandibular growth in mono- and dizygotic twins during adolescence: A retrospective cohort study.

INTRODUCTION: This study aimed to discover the genetic and environmental factors that contribute to the mandibular development of untreated monozygotic and dizygotic twins. MATERIAL AND METHODS: The sample, taken from the Forsyth Moorrees Twin Study, included 52 untreated monozygotic twins (36 male, 16 female) and 46 untreated dizygotic twins (23 male, 23 female). At the ages of 12 and 17, lateral cephalograms were collected and traced to assess total mandibular length, mandibular ramus length, mandibular corpus length, gonial angle, SNB, and bony chin prominence. The genetic and environmental components of variation were assessed using multilevel mixed-effects structural equation modelling. RESULTS: At 12 years of age, high additive genetic influences were observed for total mandibular length (74%), gonial angle (76%), SNB (41%), and bony chin prominence (64%), whereas strong dominant genetic components were observed for corpus length (72%), and mandibular ramus length was under unique environment influence (54%). At 17 years of age, only total mandibular length (45%), ramus length (53%), gonial angle (76%), and bony chin prominence (68%) were under strong additive genetic control, while the remainder were under strong dominant genetic control. CONCLUSIONS: Although monozygotic and dizygotic twins share at least a portion of their DNA, additive, dominant, or environmental components were discovered during adolescence. Nonetheless, by the age of 17, the majority of the mandibular traits are under either additive or dominant genetic impact.

Multinational study on profile preference of laypersons.

BACKGROUND: This study aimed to assess the facial profile preferences of lay people in seven locations from different countries and whether their place of residence, sex, age, race, education, or income influenced the decision. METHODS: After altering the lip and nose in 1 mm increments in the sagittal and sagittal/vertical directions, 50 profile silhouettes with white-like facial features were rated by evaluators. The soft tissue values were integrated into the profiles, and profile preferences were identified for each location. An ANOVA with post hoc Tukey test was used to compare the differences in mean preference in each location. A multivariable regression model was used to assess the effect of the demographics of the evaluator on preference. RESULTS: Thirteen profiles were ultimately analyzed. The mean for profile preference was significantly different across locations (P < 0.0001). For evaluators in the United States and Lebanon, the most preferred profile had the original lip and original nose. In Switzerland and South Africa, retrusive lips, and a small and less upturned nose was most preferred. In Japan and Saudi Arabia, the most preferred profile had the original lip and a protrusive nose that was less upturned. A protrusive lip with a small, upturned nose was preferred in Turkey. Profile change (P < 0.0001), location (P < 0.0001), sex (P < 0.0001), and race (P = 0.02) were significant confounders; in contrast, age, education, and income were not significant. CONCLUSIONS: Profile preference is different among the seven locations. For the most part, lay people prefer profiles within one SD from white norms. Also, an upturned nose is the least favored in most of the locations. Sex and race are also significant confounders. CLINICAL RELEVANCE: An orthodontic treatment plan decision is affected by an individual's preference for their facial appearance. This study helps clinicians understand how racial and regional differences may affect patients' preferences and, therefore, their expectations for orthodontic treatment results.

Heritability of facial soft tissue growth in mono- and dizygotic twins at 12 and 17 years of age: A retrospective cohort study.

OBJECTIVE: The purpose of this investigation of untreated monozygotic and dizygotic twins was to identify the genetic and environmental components to the facial soft tissue growth. SETTINGS AND SAMPLE POPULATION: The sample consisted of 52 untreated monozygotic twins (36 male and 16 female) and 46 untreated dizygotic twins (23 male and 23 female) from the Forsyth Moorrees Twin Study (1959-1975). MATERIALS AND METHODS: Lateral cephalograms were taken at 12 and 17 years of age and traced to analyse facial convexity, nasolabial angle, upper and lower lip thickness, upper and lower lip profile and nose prominence. The genetic and environmental components of variance were analysed with structural equation modelling for multilevel mixed-effects model. RESULTS: At 12 years of age, strong additive genetic influence was seen for facial convexity (70%), upper lip profile (66%) and nose prominence (65%), whereas strong dominant genetic components were found for upper lip thickness (56%). Nevertheless, under unique environment influence were nasolabial angle (58%), lower lip profile (51%) and lower lip thickness (64%). At 17 years of age, only upper lip thickness (55%) and nose prominence (84%) were under strong additive genetic control, while the rest of the variables were under strong dominant genetic control. The only exception was lower lip thickness (61%), which is still influenced by the unique environment. CONCLUSION: Although monozygotic/dizygotic twins share at least part of their genome, at both times either additive, dominant or environmental components were found. Nevertheless, at 17 years of age most of the variables are either under additive or dominant genetic influence.

Factors influencing the removal torque of palatal implant used for orthodontic anchorage.

BACKGROUND: A non-invasive method has recently been introduced to remove osseo-integrated palatal implants by using the implantation ratchet which is designed to screw in or unscrew the implants. Although a proof of concept has been published, the torque involved to successfully explant have not been investigated so far. The aim of this study was to assess the removal torque required to explant osseo-integrated and orthodontically utilized palatal implants, and to identify potentially influencing variables. MATERIALS AND METHOD: Thirty-one consecutive patients (15 females, 16 males; mean age 24.1 ±7.4 years) with fully osseo-integrated and previously orthodontically loaded palatal implants (Orthosystem®: diameter 4.1mm/length 4.2mm/sandblasted with large grits (SLA) surface) were randomly assigned to either clockwise or counter-clockwise non-invasive explantation. The respective explantation tool with an electric torque control was placed on the abutment connection of the implant and secured by an occlusal screw. The primary outcome studied was maximal removal torque (MRT) needed to detach the implant from its socket which was recorded individually together with other potentially influencing secondary outcomes (gender, age, orthodontic loading time, use of local anaesthetics). Student's t-test was used to contrast MRT difference for the gender, type of suprastructure, use of local anaesthetics, and rotational direction. Spearman correlations was used to investigate associations between MRT and patient's age or duration loading time. RESULTS: Average MRT (148.6 ± 63.2N/cm) using ratchet as a non-invasive removal method of palatal implant was considered safe. The triangular head fractured of palatal implant at a torque level of 300.1 Ncm. Significantly higher explantation were recorded for male patients compared to female patients (182.0 ± 63.0 Ncm vs 112.8 ± 40.8 Ncm; P=0.001). On the other side, the mean removal torque for palatal removal in clockwise direction was non-significantly different (158.3 ± 58.6 Ncm) compared to counter-clockwise direction (139.4 ± 67.9 Ncm). Neither patient's age (p=0.324) nor loading time (p=0.214) were significantly correlated with removal torque values. CONCLUSIONS: Pertinent literature on this subject is practically non-existent, as orthodontics is presumably the only discipline where implant removal represents a treatment success. Mean MRT for successful palatal implant removal was 148.6±63.2Ncm, but a large spectrum was observed (minimum 31.5Ncm, maximum 272.8Ncm). This obvious heterogeneity underlines the importance to investigate possible influencing factors. The safe and simple non-invasive method for palatal implant removal necessitates moderate, but not high torque MRTs, independently of the torque direction. The necessary MRT seems clearly influenced by gender, but less so by patient's age or loading time.

Genetic and environmental components of vertical growth in mono- and dizygotic twins up to 15-18 years of age.

OBJECTIVES: To determine the additive genetic and environmental contributions to the vertical growth of craniofacial structures. MATERIALS AND METHODS: The sample consisted of 64 untreated monozygotic (44 male, 20 female) and 61 untreated dizygotic twins (32 male, 29 female). Lateral cephalograms taken at 15 and 18 years of age were traced to analyze the sella-nasion-nasal line angle (SN-NL), nasal line-mandibular line angle (ML-NL), sella-nasion-mandibular line angle (SN-ML), sella-nasion-sella-gnathion angle (Y-axis), posterior face height/anterior face height (PFH/AFH), and lower anterior face height/anterior face height (LAFH/AFH). The genetic and environmental components of variance were analyzed with structural equation modeling for multilevel mixed effects. RESULTS: At 15 years of age, strong dominant genetic control was seen for NL-ML (81%), LAFH/AFH (73%), and Y-axis (57%), whereas strong additive genetic components were found for PFH/AFH (78%), SN-NL (58%), and SN-ML (57%). Unique environmental factors accounted for 18-42% of observed variance, with SN-NL being affected the most (42%). At 18 years of age, only LAFH/AFH (86%) was under strong dominant genetic control, whereas the remainder were under additive genetic influence. The sole exception was SN-NL, which changed from additive to unique environmental influence. CONCLUSIONS: Either additive or dominant genetic components were found at 15 or 18 years of age for most vertical variables. Environmental factors accounted for about 10-40%, with SN-NL being mostly affected.

[Prosthetic implants used as orthodontic anchor-age - Introducing a complete digital workflow for clinical use]. / Prothetische Implantate zur kieferorthopädischen Verankerung ­ Einführung eines komplett digitalen Behandlungsablaufs für den klinischen Einsatz.

The aim of this case report was to introduce the clinical use of a prosthetic soft tissue level implant and a completely digitized workflow for the production of an individualized suprastructure fixated on prosthetic implants for orthodontic anchorage rein­forcement. A prosthetic soft tissue level implant was placed in the palatal region for orthodontic anchorage reinforcement. Based on an intraoral optical scan taken after implant osseointegration, the orthodontic suprastructure was manufactured entirely by means of computer­aided design and manufacturing (CAD/CAM). The individualized suprastructure was subsequently loaded in direct manner. The prosthetic implant was then re­moved in a non­invasive manner, similar to palatal implants.The analysis included clinical and laboratory fabrication steps. The placement of prosthetic implant in the palatal region proved to be a painless, easy and fast procedure, and provided absolute anchorage during the entire intended orthodontic treatment. Its non­invasive removal did not cause any adverse patient reactions. The digitally constructed suprastructure did not require any chairside adaptation at delivery and was suc­cessfully used for the intended orthodontic treatment.The reported case presents the successful placement, loading and removal of a prosthetic soft tissue level implant for ortho­dontic anchorage use in the palatal region. The described digital and model­free workflow provides a feasible and streamlined treatment modality for the fabrication of individualized ortho­dontic suprastructures by means of CAD/CAM for the use as or­thodontic anchorage reinforcement. This proof of principle should be substantiated with further larger­scaled investigations.

Vertical growth in mono-and dizygotic twins: A longitudinal cephalometric cohort study.

OBJECTIVE: The aims of this longitudinal analysis of untreated monozygotic and dizygotic twins were to investigate vertical changes of the craniofacial structures during growth, to determine the concordance between genetically twins and to assess the genetic component for the various aspects of vertical growth. SETTINGS AND SAMPLE POPULATION: The sample consisted of 34 pairs of untreated monozygotic twins (23 male, 11 female) and 30 untreated dizygotic siblings of multiple birth (8 male, 8 female and 14 mixed) from the Forsyth Moorrees Twin Study (1959-1975); lateral cephalograms taken from 6 to 18 years of age were analysed at 3-year intervals. MATERIALS AND METHODS: Cephalograms were traced, and longitudinal changes between twins in six angular and proportional vertical cephalometric variables (SN-NL, ML-NL, SN-ML, y-axis, PFH/AFH and LAFH/AFH) were analysed with intraclass correlation coefficients and linear regression modelling. RESULTS: The concordance between monozygotic/dizygotic twins at 18 years of age was moderate to high with intraclass correlation coefficient values between 0.51 and 0.66. Additionally, sex differences in concordance at 18 years of age were found for three variables. High heritability (66%-79%) was observed for 5 of the 6 variables (LAFH/AFH, ML-NL, y-axis, SN-ML, PFH/AFH), while SN-NL showed limited heritability (34%). CONCLUSIONS: Although monozygotic/dizygotic twins share at least part of their genetic material, differences in the vertical dimension were found. This supports the complex developmental mechanism of the human face and the varying influence of genetic and environmental factors.

A Comparison of the Compositional, Microstructural, and Mechanical Characteristics of Ni-Free and Conventional Stainless Steel Orthodontic Wires.

Ni-free orthodontic wires were introduced to mitigate concerns associated with the use of Ni-containing alloys in orthodontics. However, limited information is available on their properties and therefore, the aim of this study was to characterize the elemental composition, the microstructure, and the mechanical properties of Ni-free orthodontic wires and compare them with their stainless steel (SS) counterparts. Four Ni-free and four conventional SS wires were included in this study. All the wires were initially imaged with a Scanning Electron Microscopy (SEM) and their elemental compositions were determined by X-ray Energy Dispersive Spectroscopy (EDX). Then, their microstructure was assessed by X-ray Diffraction (XRD) and the indentation modulus, elastic index, Martens Hardness and Vickers Hardness by Instrumented Indentation Testing (IIT). All the wires demonstrated surface cracks and pores oriented parallel to their long axis. The elemental composition of Ni-free alloys showed an increased Mn and Cr content while both SS and Ni-free wires shared the same dominant austenite structure. In conclusion, despite the differences in elemental composition, Ni-free wires demonstrated a similar microstructure and comparable mechanical properties with their conventional SS counterparts and thus may be considered as a promising alternative for patients with Ni supersensitivity.

Creep, Hardness, and Elastic Modulus of Lingual Fixed Retainers Adhesives.

The aims of this study were twofold: a) to characterize a wide array of time-independent and -dependent properties and b) to find possible correlations among the properties tested. Seven commercially available orthodontic adhesives were included in this study and ten cylindrical specimens were prepared from each material. Five specimens from each material were used for the characterization of Martens Hardness (HM), indentation modulus (EIT), and elastic index (ηIT), and the remaining five for the determination of indentation creep (CIT). Al the aforementioned properties were identified by employing an Instrumented Indentations Testing (IIT) device with a Vickers indenter. The results of HM, EIT, ηIT, and CIT were statistically analyzed by one way ANOVA and Tukey post hoc test, while the possible correlations among the aforementioned properties were determined by Spearman correlation test. Statistical significant differences were identified for all properties among the materials tested. Spearman correlation reveals that HM has a positive correlation with EIT. Both properties demonstrated a negative correlation with ηIT and CIT, while no correlation was identified between ηIT and CIT. Significant differences in the mechanical properties tested may also imply differences in their clinical behavior and efficacy.

Facial soft tissue growth in identical twins.

INTRODUCTION: The aims of this longitudinal analysis of untreated monozygotic twins were to investigate the change of the facial soft tissues during growth, to determine the concordance of soft tissue growth patterns between genetically identical twins, and to assess the genetic component of soft tissue development. METHODS: The sample consisted of 33 pairs of untreated monozygotic twins (23 male, 10 female) from the Forsyth Moorrees Twin Study (1959-1975); lateral cephalograms taken from 6 to 18 years of age were analyzed at 3-year intervals. Cephalograms were traced, and longitudinal changes in the soft tissue profile between twins were analyzed with intraclass correlation coefficients and linear regression modelling. RESULTS: The concordance between monozygotic twins at 18 years of age was moderate to high with intraclass correlation coefficients values between 0.37 and 0.87. Additionally, female twins showed higher concordance at 18 years of age than did male twins for all included variables. However, about 10% to 46% of the twin pairs had large differences in their soft tissue parameters, even after the growth period. CONCLUSIONS: Although monozygotic twins possess the same genetic material, differences in the soft tissues were found. This supports the complex developmental mechanism of the human face and the varying influence of genetic and environmental factors.

Interventions for orthodontically induced white spot lesions: a systematic review and meta-analysis.

Background: Although orthodontic white spot lesions (WSLs) are one of the most often and most evident adverse effects of comprehensive fixed appliance treatment, the efficacy of interventions for WSLs has not yet been adequately assessed in an evidence-based manner. Objective: Aim of this systematic review was to assess the therapeutic and adverse effects of interventions to treat post-orthodontic WSLs from randomized trials in human patients. Search methods: An unrestricted electronic search of eight databases from inception to May 2016. Selection criteria: Randomized controlled trials assessing any interventions for post-orthodontic WSLs on human patients. Data collection and analysis: After duplicate study selection, data extraction, and risk of bias assessment according to the Cochrane guidelines, random-effects meta-analyses of mean differences (MDs), standardized mean differences (SMDs), and odds ratios (ORs), including their 95% confidence intervals (CIs) were performed, followed by subgroup and sensitivity analyses. Results: A total of 20 unique studies and a total of 942 (42 per cent male and 58% per cent female) patients were included, with an average age of 16.2 years and a mean number of 8.2 WSLs (range 2.2 to 45.4) per patient. These were allocated to adjunct treatment with casein phosphopeptide-stabilized amorphous calcium phosphate creams, external tooth bleaching, low- or high-concentration fluoride films, gels, mouthrinses or varnishes, resin infiltration, miswak chewing sticks, bioactive glass toothpastse, or to no adjunct treatment (i.e. conventional oral hygiene). The monthly use of fluoride varnish was the best supplement to improve WSLs in terms of lesion area (1 trial; MD = -0.80 mm2; 95% CI = -1.10, -0.50 mm2; P < 0.05; high quality) and enamel fluorescence (3 trials; SMD = -0.92; 95% CI = -1.32, -0.52; P < 0.05; high quality), followed by the use of fluoride film. WSL treatment did not provide a considerable improvement in their clinical evaluation (3 trials; OR = 0.97; 95% CI = 0.60, 1.56; P > 0.05; moderate quality), with imprecision due to small sample size being the main limitation of existing evidence. Conclusions: Based on the existing trials, interventions for post-orthodontic WSLs, mainly fluoride varnish, seem to be effective, but further research is needed to elucidate their clinical relevance. Registration: PROSPERO (CRD42016037538).