Characterization of the transmitted near-infrared wavefront error for the GRAVITY/VLTI Coudé Infrared Adaptive Optics System.

The adaptive optics system for the second-generation VLT-interferometer (VLTI) instrument GRAVITY consists of a novel cryogenic near-infrared wavefront sensor to be installed at each of the four unit telescopes of the Very Large Telescope (VLT). Feeding the GRAVITY wavefront sensor with light in the 1.4 to 2.4 micrometer band, while suppressing laser light originating from the GRAVITY metrology system, custom-built optical components are required. In this paper, we present the development of a quantitative near-infrared point diffraction interferometric characterization technique, which allows measuring the transmitted wavefront error of the silicon entrance windows of the wavefront sensor cryostat. The technique can be readily applied to quantitative phase measurements in the near-infrared regime. Moreover, by employing a slightly off-axis optical setup, the proposed method can optimize the required spatial resolution and enable real time measurement capabilities. The feasibility of the proposed setup is demonstrated, followed by theoretical analysis and experimental results. Our experimental results show that the phase error repeatability in the nanometer regime can be achieved.

Atmosphere-like turbulence generation with surface-etched phase-screens.

We built and characterized an optical system that emulates the optical characteristics of an 8m-class telescope like the Very Large Telescope. The system contains rotating glass phase-screens to generate realistic atmosphere-like optical turbulence, as needed for testing multiconjugate adaptive optics systems. In this paper we present an investigation of the statistical properties of two phase-screens etched on glass-plate surfaces, obtained from Silios Technologies. Those etched screens are highly transmissive (above 85%) from 0.45 to 2.5 microm. From direct imaging, their Fried parameter r0 values (0.43+/-0.04 microm and 0.81+/-0.03 microm, respectively, at 0.633 microm) agree with the expectation to within 10%. This is also confirmed by a comparison of measured and expected Zernike coefficient variances. Overall, we find that those screens are quite reproducible, allowing sub-millimetre r0 values, which were difficult to achieve in the past. We conclude that the telescope emulator and phase-screens form a powerful atmospheric turbulence generator allowing systematic testing of different kinds of AO instrumentation.

Broadband, static wave-front generation: Na-Ag ion-exchange phase screens and telescope emulation.

We test the statistical properties of static, atmospherelike wave fronts in glass that allow repeatable testing of astronomical adaptive optics instrumentation. The technology is mask-structured ion exchange (MSI) in glass and has significant advantages over other transmissive technologies. The screens are easy to clean, are insensitive to ambient temperature changes, and have high optical-to-near-infrared transmission. However, the effective coherence length (r0) on each of the fabricated screens is systematically too large or, equivalently, the fabricated aberrations are too weak. Despite this strong caveat, the screens appear to be quite useful: Long-exposure point-spread functions have realistic shapes, and power spectrum indices closely match those of the computer-generated wave fronts. Most significant, stacking screens with similar r0 values reduced r0 by the amount predicted by turbulence theory. The refractivity of MSI screens remains unmeasured. Finally, we present our design of an optical system that emulates the key characteristics of the Very Large Telescope, made to contain glass phase screens and to mimic an array of stars for multiconjugate adaptive optics system testing.