Hydrogen-Stabilized ScYNdGd Medium-Entropy Alloy for Hydrogen Storage.

The research on the functional properties of medium- and high-entropy alloys (MEAs and HEAs) has been in the spotlight recently. Many significant discoveries have been made lately in hydrogen-based economy-related research where these alloys may be utilized in all of its key sectors: water electrolysis, hydrogen storage, and fuel cell applications. Despite the rapid development of MEAs and HEAs with the ability to reversibly absorb hydrogen, the research is limited to transition-metal-based alloys that crystallize in body-centered cubic solid solution or Laves phase structures. To date, no study has been devoted to the hydrogenation of rare-earth-element (REE)-based MEAs or HEAs, as well as to the alloys crystallizing in face-centered-cubic (FCC) or hexagonal-close-packed structures. Here, we elucidate the formation and hydrogen storage properties of REE-based ScYNdGd MEA. More specifically, we present the astounding stabilization of the single-phase FCC structure induced by the hydrogen absorption process. Moreover, the measured unprecedented high storage capacity of 2.5 H/M has been observed after hydrogenation conducted under mild conditions that proceeded without any phase transformation in the material. The studied MEA can be facilely activated, even after a long passivation time. The results of complementary measurements showed that the hydrogen desorption process proceeds in two steps. In the first, hydrogen is released from octahedral interstitial sites at relatively low temperatures. In the second, high-temperature process, it is associated with the desorption of hydrogen atoms stored in tetrahedral sites. The presented results may impact future research of a novel group of REE-based MEAs and HEAs with adaptable hydrogen storage properties and a broad scope of possible applications.

Small-pore hydridic frameworks store densely packed hydrogen.

Nanoporous materials have attracted great attention for gas storage, but achieving high volumetric storage capacity remains a challenge. Here, by using neutron powder diffraction, volumetric gas adsorption, inelastic neutron scattering and first-principles calculations, we investigate a magnesium borohydride framework that has small pores and a partially negatively charged non-flat interior for hydrogen and nitrogen uptake. Hydrogen and nitrogen occupy distinctly different adsorption sites in the pores, with very different limiting capacities of 2.33 H2 and 0.66 N2 per Mg(BH4)2. Molecular hydrogen is packed extremely densely, with about twice the density of liquid hydrogen (144 g H2 per litre of pore volume). We found a penta-dihydrogen cluster where H2 molecules in one position have rotational freedom, whereas H2 molecules in another position have a well-defined orientation and a directional interaction with the framework. This study reveals that densely packed hydrogen can be stabilized in small-pore materials at ambient pressures.

Establishing ZIF-8 as a reference material for hydrogen cryoadsorption: An interlaboratory study.

Hydrogen storage by cryoadsorption on porous materials has the advantages of low material cost, safety, fast kinetics, and high cyclic stability. The further development of this technology requires reliable data on the H2 uptake of the adsorbents, however, even for activated carbons the values between different laboratories show sometimes large discrepancies. So far no reference material for hydrogen cryoadsorption is available. The metal-organic framework ZIF-8 is an ideal material possessing high thermal, chemical, and mechanical stability that reduces degradation during handling and activation. Here, we distributed ZIF-8 pellets synthesized by extrusion to 9 laboratories equipped with 15 different experimental setups including gravimetric and volumetric analyzers. The gravimetric H2 uptake of the pellets was measured at 77 K and up to 100 bar showing a high reproducibility between the different laboratories, with a small relative standard deviation of 3-4 % between pressures of 10-100 bar. The effect of operating variables like the amount of sample or analysis temperature was evaluated, remarking the calibration of devices and other correction procedures as the most significant deviation sources. Overall, the reproducible hydrogen cryoadsorption measurements indicate the robustness of the ZIF-8 pellets, which we want to propose as a reference material.

ZIF-8 Pellets as a Robust Material for Hydrogen Cryo-Adsorption Tanks.

Cryoadsorption on the inner surface of porous materials is a promising solution for safe, fast, and reversible hydrogen storage. Within the class of highly porous metal-organic frameworks, zeolitic imidazolate frameworks (ZIFs) show high thermal, chemical, and mechanical stability. In this study, we selected ZIF-8 synthesized mechanochemically by twin-screw extrusion as powder and pellets. The hydrogen storage capacity at 77 K and up to 100 bar has been analyzed in two laboratories applying three different measurement setups showing a high reproducibility. Pelletizing ZIF-8 increases the packing density close to the corresponding value for a single crystal without loss of porosity, resulting in an improved volumetric hydrogen storage capacity close to the upper limit for a single crystal. The high volumetric uptake combined with a low and constant heat of adsorption provides ca. 31 g of usable hydrogen per liter of pellet assuming a temperature-pressure swing adsorption process between 77 K - 100 bar and 117 K - 5 bar. Cycling experiments do not indicate any degradation in storage capacity. The excellent stability during preparation, handling, and operation of ZIF-8 pellets demonstrates its potential as a robust adsorbent material for technical application in pilot- and full-scale adsorption vessel prototypes.

A squarate-pillared titanium oxide quantum sieve towards practical hydrogen isotope separation.

Separating deuterium from hydrogen isotope mixtures is of vital importance to develop nuclear energy industry, as well as other isotope-related advanced technologies. As one of the most promising alternatives to conventional techniques for deuterium purification, kinetic quantum sieving using porous materials has shown a great potential to address this challenging objective. From the knowledge gained in this field; it becomes clear that a quantum sieve encompassing a wide range of practical features in addition to its separation performance is highly demanded to approach the industrial level. Here, the rational design of an ultra-microporous squarate pillared titanium oxide hybrid framework has been achieved, of which we report the comprehensive assessment towards practical deuterium separation. The material not only displays a good performance combining high selectivity and volumetric uptake, reversible adsorption-desorption cycles, and facile regeneration in adsorptive sieving of deuterium, but also features a cost-effective green scalable synthesis using chemical feedstock, and a good stability (thermal, chemical, mechanical and radiolytic) under various working conditions. Our findings provide an overall assessment of the material for hydrogen isotope purification and the results represent a step forward towards next generation practical materials for quantum sieving of important gas isotopes.

Formation of a super-dense hydrogen monolayer on mesoporous silica.

Adsorption on various adsorbents of hydrogen and helium at temperatures close to their boiling points shows, in some cases, unusually high monolayer capacities. The microscopic nature of these adsorbate phases at low temperatures has, however, remained challenging to characterize. Here, using high-resolution cryo-adsorption studies together with characterization by inelastic neutron scattering vibration spectroscopy, we show that, near its boiling point (~20 K), H2 adsorbed on a well-ordered mesoporous silica forms a two-dimensional monolayer with a density more than twice that of bulk-solid H2, rather than a bilayer. Theoretical studies, based on thorough first-principles calculations, rationalize the formation of such a super-dense phase. The strong compression of the hydrogen surface layer is due to the excess of surface-hydrogen attraction over intermolecular hydrogen repulsion. Use of this super-dense hydrogen monolayer on an adsorbent might be a feasible option for the storage of hydrogen near its boiling point, compared with adsorption at 77 K.

Hydrogen Isotope Separation Using a Metal-Organic Cage Built from Macrocycles.

Porous materials that contain ultrafine pore apertures can separate hydrogen isotopes via kinetic quantum sieving (KQS). However, it is challenging to design materials with suitably narrow pores for KQS that also show good adsorption capacities and operate at practical temperatures. Here, we investigate a metal-organic cage (MOC) assembled from organic macrocycles and ZnII ions that exhibits narrow windows (<3.0 Å). Two polymorphs, referred to as 2α and 2ß, were observed. Both polymorphs exhibit D2 /H2 selectivity in the temperature range 30-100 K. At higher temperature (77 K), the D2 adsorption capacity of 2ß increases to about 2.7 times that of 2α, along with a reasonable D2 /H2 selectivity. Gas sorption analysis and thermal desorption spectroscopy suggest a gate-opening effect of the MOCs pore aperture. This promotes KQS at temperatures above liquid nitrogen temperature, indicating that MOCs hold promise for hydrogen isotope separation in real industrial environments.

Chemical Affinity of Ag-Exchanged Zeolites for Efficient Hydrogen Isotope Separation.

We report an ion-exchanged zeolite as an excellent candidate for large-scale application in hydrogen isotope separation. Ag(I)-exchanged zeolite Y has been synthesized through a standard ion-exchange procedure. The D2/H2 separation performance has been systematically investigated via thermal desorption spectroscopy (TDS). Undercoordinated Ag+ in zeolite AgY acts as a strong adsorption site and adorbs preferentially the heavier isotopologue even above liquid nitrogen temperature. The highest D2/H2 selectivity of 10 is found at an exposure temperature of 90 K. Furthermore, the high Al content of the zeolite structure leads to a high density of Ag sites, resulting in a high gas uptake. In the framework, approximately one-third of the total physisorbed hydrogen isotopes are adsorbed on the Ag sites, corresponding to 3 mmol/g. A density functional theory (DFT) calculation reveals that the isotopologue-selective adsorption of hydrogen at Ag sites contributes to the outstanding hydrogen isotope separation, which has been directly observed through cryogenic thermal desorption spectroscopy. The overall performance of zeolite AgY, showing good selectivity combined with high gas uptake, is very promising for future technical applications.

Isotope-selective pore opening in a flexible metal-organic framework.

Flexible metal-organic frameworks that show reversible guest-induced phase transitions between closed and open pore phases have enormous potential for highly selective, energy-efficient gas separations. Here, we present the gate-opening process of DUT-8(Ni) that selectively responds to D2, whereas no response is observed for H2 and HD. In situ neutron diffraction directly reveals this pressure-dependent phase transition. Low-temperature thermal desorption spectroscopy measurements indicate an outstanding D2-over-H2 selectivity of 11.6 at 23.3 K, with high D2 uptake. First-principles calculations coupled with statistical thermodynamics predict the isotope-selective gate opening, rationalized by pronounced nuclear quantum effects. Simulations suggest DUT-8(Ni) to remain closed in the presence of HT, while it also opens for DT and T2, demonstrating gate opening as a highly effective approach for isotopolog separation.

Improving Reproducibility in Hydrogen Storage Material Research.

Research into new reversible hydrogen storage materials has the potential to help accelerate the transition to a hydrogen economy. The discovery of an efficient and cost-effective method of safely storing hydrogen would revolutionise its use as a sustainable energy carrier. Accurately measuring storage capacities - particularly of novel nanomaterials - has however proved challenging, and progress is being hindered by ongoing problems with reproducibility. Various metal and complex hydrides are being investigated, together with nanoporous adsorbents such as carbons, metal-organic frameworks and microporous organic polymers. The hydrogen storage properties of these materials are commonly determined using either the manometric (or Sieverts) technique or gravimetric methods, but both approaches are prone to significant error, if not performed with great care. Although commercial manometric and gravimetric instruments are widely available, they must be operated with an awareness of the limits of their applicability and the error sources inherent to the measurement techniques. This article therefore describes the measurement of hydrogen sorption and covers the required experimental procedures, aspects of troubleshooting and recommended reporting guidelines, with a view of helping improve reproducibility in experimental hydrogen storage material research.

Specific Isotope-Responsive Breathing Transition in Flexible Metal-Organic Frameworks.

An isotope-selective responsive system based on molecular recognition in porous materials has potential for the storage and purification of isotopic mixtures but is considered unachievable because of the almost identical physicochemical properties of the isotopes. Herein, a unique isotope-responsive breathing transition of the flexible metal-organic framework (MOF), MIL-53(Al), which can selectively recognize and respond to only D2 molecules through a secondary breathing transition, is reported. This novel phenomenon is examined using in situ neutron diffraction experiments under the same conditions for H2 and D2 sorption experiments. This work can guide the development of a novel isotope-selective recognition system and provide opportunities to fabricate flexible MOF systems for energy-efficient purification of the isotopic mixture.

Barely porous organic cages for hydrogen isotope separation.

The separation of hydrogen isotopes for applications such as nuclear fusion is a major challenge. Current technologies are energy intensive and inefficient. Nanoporous materials have the potential to separate hydrogen isotopes by kinetic quantum sieving, but high separation selectivity tends to correlate with low adsorption capacity, which can prohibit process scale-up. In this study, we use organic synthesis to modify the internal cavities of cage molecules to produce hybrid materials that are excellent quantum sieves. By combining small-pore and large-pore cages together in a single solid, we produce a material with optimal separation performance that combines an excellent deuterium/hydrogen selectivity (8.0) with a high deuterium uptake (4.7 millimoles per gram).

Exploiting Dynamic Opening of Apertures in a Partially Fluorinated MOF for Enhancing H2 Desorption Temperature and Isotope Separation.

Deuterium has been recognized as an irreplaceable element in industrial and scientific research. However, hydrogen isotope separation still remains a huge challenge due to the identical physicochemical properties of the isotopes. In this paper, a partially fluorinated metal-organic framework (MOF) with copper, a so-called FMOFCu, was investigated to determine the separation efficiency and capacity of the framework for deuterium extraction from a hydrogen isotope mixture. The unique structure of this porous material consists of a trimodal pore system with large tubular cavities connected through a smaller cavity with bottleneck apertures with a size of 3.6 Å plus a third hidden cavity connected by an even smaller aperture of 2.5 Å. Depending on the temperature, these two apertures show a gate-opening effect and the cavities get successively accessible for hydrogen with increasing temperature. Thermal desorption spectroscopy (TDS) measurements indicate that the locally flexible MOF can separate D2 from anisotope mixture efficiently, with a selectivity of 14 at 25 K and 4 at 77 K.

An International Laboratory Comparison Study of Volumetric and Gravimetric Hydrogen Adsorption Measurements.

In order to determine a material's hydrogen storage potential, capacity measurements must be robust, reproducible, and accurate. Commonly, research reports focus on the gravimetric capacity, and often times the volumetric capacity is not reported. Determining volumetric capacities is not as straight-forward, especially for amorphous materials. This is the first study to compare measurement reproducibility across laboratories for excess and total volumetric hydrogen sorption capacities based on the packing volume. The use of consistent measurement protocols, common analysis, and figure of merits for reporting data in this study, enable the comparison of the results for two different materials. Importantly, the results show good agreement for excess gravimetric capacities amongst the laboratories. Irreproducibility for excess and total volumetric capacities is attributed to real differences in the measured packing volume of the material.

Generation of Switchable Singular Beams with Dynamic Metasurfaces.

Singular beams have attracted great attention due to their optical properties and broad applications from light manipulation to optical communications. However, there has been a lack of practical schemes with which to achieve switchable singular beams with sub-wavelength resolution using ultrathin and flat optical devices. In this work, we demonstrate the generation of switchable vector and vortex beams utilizing dynamic metasurfaces at visible frequencies. The dynamic functionality of the metasurface pixels is enabled by the utilization of magnesium nanorods, which possess plasmonic reconfigurability upon hydrogenation and dehydrogenation. We show that switchable vector beams of different polarization states and switchable vortex beams of different topological charges can be implemented through simple hydrogenation and dehydrogenation of the same metasurfaces. Furthermore, we demonstrate a two-cascade metasurface scheme for holographic pattern switching, taking inspiration from orbital angular momentum-shift keying. Our work provides an additional degree of freedom to develop high-security optical elements for anti-counterfeiting applications.

Systematic Experimental Study on Quantum Sieving of Hydrogen Isotopes in Metal-Amide-Imidazolate Frameworks with narrow 1-D Channels.

Quantum sieving of hydrogen isotopes is experimentally studied in isostructural hexagonal metal-organic frameworks having 1-D channels, named IFP-1, -3, -4 and -7. Inside the channels, different molecules or atoms restrict the channel diameter periodically with apertures larger (4.2 Šfor IFP-1, 3.1 Šfor IFP-3) and smaller (2.1 Šfor IFP-7, 1.7 Šfor IFP-4) than the kinetic diameter of hydrogen isotopes. From a geometrical point of view, no gas should penetrate into IFP-7 and IFP-4, but due to the thermally induced flexibility, so-called gate-opening effect of the apertures, penetration becomes possible with increasing temperature. Thermal desorption spectroscopy (TDS) measurements with pure H2 or D2 have been applied to study isotope adsorption. Further TDS experiments after exposure to an equimolar H2 /D2 mixture allow to determine directly the selectivity of isotope separation by quantum sieving. IFP-7 shows a very low selectivity not higher than S=2. The selectivity of the materials with the smallest pore aperture IFP-4 has a constant value of S≈2 for different exposure times and pressures, which can be explained by the 1-D channel structure. Due to the relatively small cavities between the apertures of IFP-4 and IFP-7, molecules in the channels cannot pass each other, which leads to a single-file filling. Therefore, no time dependence is observed, since the quantum sieving effect occurs only at the outermost pore aperture, resulting in a low separation selectivity.

Dynamic Janus Metasurfaces in the Visible Spectral Region.

Janus monolayers have long been captivated as a popular notion for breaking in-plane and out-of-plane structural symmetry. Originated from chemistry and materials science, the concept of Janus functions have been recently extended to ultrathin metasurfaces by arranging meta-atoms asymmetrically with respect to the propagation or polarization direction of the incident light. However, such metasurfaces are intrinsically static and the information they carry can be straightforwardly decrypted by scanning the incident light directions and polarization states once the devices are fabricated. In this Letter, we present a dynamic Janus metasurface scheme in the visible spectral region. In each super unit cell, three plasmonic pixels are categorized into two sets. One set contains a magnesium nanorod and a gold nanorod that are orthogonally oriented with respect to each other, working as counter pixels. The other set only contains a magnesium nanorod. The effective pixels on the Janus metasurface can be reversibly regulated by hydrogenation/dehydrogenation of the magnesium nanorods. Such dynamic controllability at visible frequencies allows for flat optical elements with novel functionalities including beam steering, bifocal lensing, holographic encryption, and dual optical function switching.

Selective Hydrogen Isotope Separation via Breathing Transition in MIL-53(Al).

Breathing of MIL-53(Al), a flexible metal-organic framework (MOF), leads to dynamic changes as narrow pore (np) transitions to large pore (lp). During the flexible and reversible transition, the pore apertures are continuously adjusted, thus providing the tremendous opportunity to separate mixtures of similar-sized and similar-shaped molecules that require precise pore tuning. Herein, for the first time, we report a strategy for effectively separating hydrogen isotopes through the dynamic pore change during the breathing of MIL-53(Al), a representative of flexible MOFs. The experiment shows that the selectivity for D2 over H2 is strongly related to the state of the pore structure of MIL-53(Al). The highest selectivity (SD2/H2 = 13.6 at 40 K) was obtained by optimizing the exposure temperature, pressure, and time to systematically tune the pore state of MIL-53(Al).

Exploiting Diffusion Barrier and Chemical Affinity of Metal-Organic Frameworks for Efficient Hydrogen Isotope Separation.

Deuterium plays a pivotal role in industrial and scientific research, and is irreplaceable for various applications such as isotope tracing, neutron moderation, and neutron scattering. In addition, deuterium is a key energy source for fusion reactions. Thus, the isolation of deuterium from a physico-chemically almost identical isotopic mixture is a seminal challenge in modern separation technology. However, current commercial approaches suffer from extremely low separation efficiency (i.e., cryogenic distillation, selectivity of 1.5 at 24 K), requiring a cost-effective and large-scale separation technique. Herein, we report a highly effective hydrogen isotope separation system based on metal-organic frameworks (MOFs) having the highest reported separation factor as high as ∼26 at 77 K by maximizing synergistic effects of the chemical affinity quantum sieving (CAQS) and kinetic quantum sieving (KQS). For this purpose, the MOF-74 system having high hydrogen adsorption enthalpies due to strong open metal sites is chosen for CAQS functionality, and imidazole molecules (IM) are employed to the system for enhancing the KQS effect. To the best of our knowledge, this work is not only the first attempt to implement two quantum sieving effects, KQS and CAQS, in one system, but also provides experimental validation of the utility of this system for practical industrial usage by isolating high-purity D2 through direct selective separation studies using 1:1 D2/H2 mixtures.