RESUMO
Guanidine is a chemically stable nitrogen compound that is excreted in human urine and is widely used in manufacturing of plastics, as a flame retardant and as a component of propellants, and is well known as a protein denaturant in biochemistry1-3. Guanidine occurs widely in nature and is used by several microorganisms as a nitrogen source, but microorganisms growing on guanidine as the only substrate have not yet been identified. Here we show that the complete ammonia oxidizer (comammox) Nitrospira inopinata and probably most other comammox microorganisms can grow on guanidine as the sole source of energy, reductant and nitrogen. Proteomics, enzyme kinetics and the crystal structure of a N. inopinata guanidinase homologue demonstrated that it is a bona fide guanidinase. Incubation experiments with comammox-containing agricultural soil and wastewater treatment plant microbiomes suggested that guanidine serves as substrate for nitrification in the environment. The identification of guanidine as a growth substrate for comammox shows an unexpected niche of these globally important nitrifiers and offers opportunities for their isolation.
RESUMO
Foraminifera are protists primarily living in benthic marine and estuarine environments. We studied uptake of inorganic carbon (C) and nitrogen (N) of the photosymbiont-bearing benthic coral reef foraminifera Heterostegina depressa in the presence of heavy metals. Incubation experiments were accomplished with artificial seawater enriched with copper, iron, lead and zinc at two different concentration levels (10 and 100 fold enriched in contrast to the usual culture medium). Additionally, isotopically labelled 13C-sodium bicarbonate and 15N-ammonium chloride were added to trace their assimilation over time (1 d, 3 d, 5 d, 7 d). Pulse-amplified modulated fluorescence measurements were performed to measure the potential impacts of heavy metals on chlorophyll fluorescence of the photosymbiont. Increased levels of copper (430.5 µg Cu/l) exhibited the greatest toxicity, while for low levels no effect on the overall metabolism of the foraminifera and the fluorescence activity of the photosymbiont could be detected. Iron (III) increased the symbiont activity, independent of concentration applied (44.5 and 513.3 µg Fe/l), which indicates Fe-limitation of the algal symbiont. Lead enrichment showed no detectable effect even at high concentration. Low concentrations of zinc (35.1 µg Zn/l) promoted the metabolism of the foraminifera, while high concentrations (598.4 µg Zn/l) were toxic. At low levels, two metals (Fe and Zn) promoted symbiont activity, at high levels, iron still boosted photosynthesis, but Zn and Cu had a negative impact on the obligatory photosynthetic symbionts.
RESUMO
Tire materials (TMs) present a notable hazard due to their potential to release harmful chemicals and microplastics into the environment. They can infiltrate wastewater treatment plants, where their effects remain inadequately understood, raising concerns regarding their influence on treatment procedures. Thus, this study investigated the impact of TMs in wastewater (10, 25, 50 mg/L) on wastewater treatment efficiency, biomass morphology, and microbial composition in aerobic granular sludge (AGS) reactors. TM dosage negatively correlated with nitrification and denitrification efficiencies, reducing overall nitrogen removal, but did not affect the efficiency of chemical-oxygen-demand removal. The presence of TMs increased the diameter of the granules due to TM incorporation into the biomass. The most frequently leached additives from TMs were N-(1,3-dimethylbutyl)-N'-phenyl-1,4-phenylenediamine, benzothiazole (BTH), and 2-hydroxybenzothiazole. In the treated wastewater, only BTH and aniline were detected in higher concentrations, which indicates that tire additives were biodegraded by AGS. The microbial community within the AGS adapted to TMs and their chemicals, highlighting the potential for efficient degradation of tire additives by bacteria belonging to the genera Rubrivivax, Ferruginibacter, and Xanthomonas. Additionally, our research underscores AGS's ability to incorporate TMs into biomass and effectively biodegrade tire additives, offering a promising solution for addressing environmental concerns related to TMs.
Assuntos
Esgotos , Águas Residuárias , Esgotos/química , Compostos de Nitrogênio , Eliminação de Resíduos Líquidos/métodos , Biomassa , Plásticos , Nitrogênio/análise , Reatores Biológicos/microbiologia , AerobioseRESUMO
This design study presents an analysis and abstraction of temporal and spatial data, and workflows in the domain of hydrogeology and the design and development of an interactive visualization prototype. Developed in close collaboration with a group of hydrogeological researchers, the interface supports them in data exploration, selection of data for their numerical model calibration, and communication of findings to their industry partners. We highlight both pitfalls and learnings of the iterative design and validation process and explore the role of rapid prototyping. Some of the main lessons were that the ability to see their own data changed the engagement of skeptical users dramatically and that interactive rapid prototyping tools are thus powerful to unlock the advantage of visual analysis for novice users. Further, we observed that the process itself helped the domain scientists understand the potential and challenges of their data more than the final interface prototype.
RESUMO
Phthalic acid esters (phthalates) are an important group of additives (plasticizers) to ensure the flexibility and stability especially of polyvinyl chloride (PVC) and to enable its processing. However, phthalates like di(2-ethylhexyl) phthalate (DEHP) are harmful for aquatic organisms due to their endocrine disrupting effects and toxicity. For the assessment of exposure concentrations, thorough understanding of leaching kinetics of phthalates from PVC (micro-) plastics into aqueous environments is necessary. This study investigates how environmental factors influence the leaching of phthalates from PVC microplastics into aquatic systems. The leaching of phthalates from PVC microplastics into aqueous media is limited by aqueous boundary layer diffusion (ABLD) and thus, process-specific parameters can be affected by environmental factors such as salinity and the flow conditions. We conducted batch leaching experiments to assess the influence of salinity and flow conditions (turbulence) on the leaching of DEHP from PVC microplastics into aqueous media. DEHP is salted out with increasing salinity of the solution and a salting-out coefficient for DEHP of 0.46 was determined. The partitioning coefficient of DEHP between PVC and water KPVC/W increased with increasing salinity from 108.52 L kg-1 in a 1 mM KCl solution to 108.75 L kg-1 in artificial seawater thereby slowing down leaching. Increasing flow velocities led to higher leaching rates because the ABL thickness decreased from 1315 µm at 0 rpm shaking speed (no-flow conditions) to 38.4 µm at 125 rpm (turbulent conditions). Compared to salinity, turbulence had a more pronounced effect on leaching. Increasing the flow velocity led to a 35-fold decrease in the leaching rate, while increasing salinity led to a 2-fold increase. By calculating specific leaching times, that is, leaching half-lives (t1/2), time frames for leaching in different aquatic systems such as rivers and the ocean were determined. Given ABLD-limited leaching, DEHP is leached faster from PVC microplastics in rivers (t1/2 > 49 years) than in the ocean (t1/2 > 398 years). In both systems, PVC microplastics are a long-term source of phthalates.
Assuntos
Dietilexilftalato , Ácidos Ftálicos , Plásticos , Dietilexilftalato/toxicidade , Microplásticos , Cloreto de Polivinila , Plastificantes/análise , Plastificantes/toxicidade , ÁguaRESUMO
Remediation of residually contaminated soils remains a widespread problem. Biochar can immobilize polycyclic aromatic hydrocarbons (PAH). However, studies on its ability to immobilize PAH and N, S, and O substituted PAH (hetero-PAH) in real soils, and benchmarking with commercial activated carbon are missing. Here, we compared the ability of pristine biochar (BC), steam-activated biochar (SABC), and commercial activated carbon (AC) to immobilize PAH and hetero-PAH. The three carbons were tested on soils from four different contaminated sites in Austria. Different amendment rates (w/w) of the carbons were investigated (BC: 1.0, 2.5, and 5%; SABC: 0.5, 1.0, and 2.0%; AC: 1%) in batch experiments to cover meaningful ranges in relation to their performance. SABC performed better than AC, removing at least 80% PAH with the lowest application rate of 0.5%, and achieving a complete removal at an application rate of 1.0%. BC performed slightly worse but still acceptable in residually contaminated soils (40 and 100% removal at 1 and 5% amendment, respectively). The ability of BC and SABC to immobilize PAH decreased as the PAH-molar volume increased. PAH with three or more rings were preferentially removed by AC compared to SABC or BC. This can be explained by the difference in pore size distribution of the carbons which could limit the accessibility of PAH and hetero-PAH to reach sorption sites for π- π electron donor-acceptor interactions, which drive PAH and hetero-PAH sorption to carbons. Column percolation tests confirmed the results obtained in batch tests, indicating, that decisions for soil remediation can be derived from simpler batch experiments. In soil samples with 1% BC, a reduction of over 90% in the total concentration of PAH in the leached water was observed. Overall, BC and SABC were demonstrated to be valid substitutes for AC for stabilizing residually contaminated soils.
Assuntos
Hidrocarbonetos Policíclicos Aromáticos , Poluentes do Solo , Hidrocarbonetos Policíclicos Aromáticos/análise , Carvão Vegetal , Benchmarking , Poluentes do Solo/análise , SoloRESUMO
Climate change, biodiversity loss, and chemical pollution are planetary-scale emergencies requiring urgent mitigation actions. As these "triple crises" are deeply interlinked, they need to be tackled in an integrative manner. However, while climate change and biodiversity are often studied together, chemical pollution as a global change factor contributing to worldwide biodiversity loss has received much less attention in biodiversity research so far. Here, we review evidence showing that the multifaceted effects of anthropogenic chemicals in the environment are posing a growing threat to biodiversity and ecosystems. Therefore, failure to account for pollution effects may significantly undermine the success of biodiversity protection efforts. We argue that progress in understanding and counteracting the negative impact of chemical pollution on biodiversity requires collective efforts of scientists from different disciplines, including but not limited to ecology, ecotoxicology, and environmental chemistry. Importantly, recent developments in these fields have now enabled comprehensive studies that could efficiently address the manifold interactions between chemicals and ecosystems. Based on their experience with intricate studies of biodiversity, ecologists are well equipped to embrace the additional challenge of chemical complexity through interdisciplinary collaborations. This offers a unique opportunity to jointly advance a seminal frontier in pollution ecology and facilitate the development of innovative solutions for environmental protection.
Assuntos
Ecossistema , Poluição Ambiental , Biodiversidade , Ecologia , Conservação dos Recursos Naturais , Mudança ClimáticaRESUMO
Aquifers providing drinking water are increasingly threatened by emerging contaminants due to wastewater inputs from multiple sources. These inputs have to be identified, differentiated, and characterized to allow an accurate risk assessment and thus ensure the safety of drinking water through appropriate management. We hypothesize, that in climates with seasonal temperature variations, the sweetener acesulfame potassium (ACE) provides new pathways to study wastewater inputs to aquifers. Specifically, this study investigates the temperature-driven seasonal oscillation of ACE to assess multiple sources of wastewater inputs at a riverbank filtration site. ACE concentrations in the river water varied from 0.2 to 1 µg L-1 in the cold season (T < 10 °C) to 0-0.1 µg L-1 in the warm season (T > 10 °C), due to temperature-dependent biodegradation during wastewater treatment. This oscillating signal could be traced throughout the aquifer over distances up to 3250 m from two different infiltration sources. A transient numerical model of groundwater flow and ACE transport was calibrated over hydraulic heads and ACE concentrations, allowing the accurate calculation of mixing ratios, travel times, and flow-path directions for each of the two infiltration sources. The calculated travel time from the distant infiltration source was of 67 days, while that from the near source was of 20 days. The difference in travel times leads to different potential degradation of contaminants flowing into the aquifer from the river, thus demonstrating the importance of individually assessing the locations of riverbank infiltration. The calibrated ACE transport model allowed calculating transient mixing ratios, which confirmed the impact of river stage and groundwater levels on the mixing ratio of the original groundwater and the bank filtrate. Therefore, continuous monitoring of ACE concentrations can help to optimize the management of the water works with the aim to avoid collection of water with very short travel times, which has important regulative aspects. Our findings demonstrate the suitability of ACE as a transient tracer for identifying multiple sources of wastewater, including riverbank filtration sites affected by wastewater treatment plant effluents. ACE seasonal oscillation tracking thus provides a new tool to be used in climates with pronounced seasonal temperature variations to assess the origins of contamination in aquifers, with time and cost advantages over multi-tracer approaches.
Assuntos
Água Potável , Água Subterrânea , Tiazinas , Poluentes Químicos da Água , Águas Residuárias , Rios , Edulcorantes , Filtração , Poluentes Químicos da Água/análise , Monitoramento AmbientalRESUMO
The persistence of the artificial sweetener acesulfame potassium (ACE) during wastewater treatment and subsequently in the aquatic environment has made it a widely used tracer of wastewater inputs to both surface water and groundwater. However, the recently observed biodegradation of ACE during wastewater treatment has questioned the validity of this application. In this study, we assessed the use of ACE not only as a marker of wastewater, but also as a transient wastewater tracer that allows both the calculation of mixing ratios and travel times through the aquifer as well as the calibration of transient groundwater flow and mass transport models. Our analysis was based on data obtained in a nearly 8-year river water and groundwater sampling campaign along a confirmed wastewater-receiving riverbank filtration site located close to a drinking water supply system. We provide evidence that temperature controls ACE concentration and thus its seasonal oscillation. River water data showed that ACE loads decreased from 1.5-4 mg·s-1 in the cold season (December to June; T<10 °C) to 0-0.5 mg·s-1 in the warm season (July to November; T>10 °C). This seasonal variability of >600% was detectable in the aquifer and preserved >3 km, with ACE concentrations oscillating between Assuntos
Água Subterrânea
, Poluentes Químicos da Água
, Edulcorantes
, Águas Residuárias
, Estações do Ano
, Poluentes Químicos da Água/análise
, Água/análise
, Monitoramento Ambiental
RESUMO
Nanoplastics are an increasing environmental concern. In aquatic environments, nanoplastics will acquire an eco-corona by interacting with macromolecules (e.g., humic substances and extracellular polymeric substances (EPS)). Here, we show that the properties of the eco-corona and, consequently, its ability to enhance the transport of nanoplastics vary significantly with the surface functionality of nanoplastics and sources of macromolecules. The eco-corona derived from the EPS of Gram-negative Escherichia coli MG1655 enhances the transport of polystyrene (PS) nanospheres in saturated porous media to a much greater extent than the eco-corona derived from soil humic acid and fulvic acid. In comparison, the eco-corona from all three sources significantly enhance the transport of carboxylated PS (HOOC-PS). We show that the eco-corona inhibits the deposition of the two types of nanoplastics to the porous media mainly via steric repulsion. Accordingly, an eco-corona consisting of a higher mass of larger-sized macromolecules is generally more effective in enhancing transport. Notably, HOOC-PS tends to acquire macromolecules of lower hydrophobicity than PS. The more disordered and flexible structures of such macromolecules may result in greater elastic repulsion between the nanoplastics and sand grains and, consequently, greater transport enhancement. The findings of this study highlight the critical role of eco-corona formation in regulating the mobility of nanoplastics, as well as the complexity of this process.
Assuntos
Microplásticos , Nanosferas , Porosidade , Solo , Poliestirenos , Substâncias Húmicas/análiseRESUMO
The increasing use of gadolinium (Gd)-based contrast agents in magnetic resonance imaging and the recalcitrant behavior of Gd during municipal wastewater treatment have led to increased concentrations of the tracer in aquatic environments. These anthropogenic Gd emissions to wastewater and, subsequently, to surface and groundwater systems can be exploited to calculate groundwater travel times and mixing ratios, identify wastewater inputs, and calibrate groundwater models. However, analytical complexity, costs, and the time needed to directly measure anthropogenic inputs hinder the practical use of Gd. While direct measurements with inductively coupled plasma-mass spectrometry (ICP-MS) are highly efficient and feasible, only total Gd can be detected with this approach. In unknown hydrogeological systems, the differentiation between total, anthropogenic, and geogenic Gd by interpolating rare earth element patterns requires complex sample pre-treatment and pre-concentration. Direct measurements of Gd can be obtained using anion-exchange chromatography coupled to ICP-MS but the limit of quantification will be higher. Here we provide guidelines for selecting the optimal method for the analysis of Gd as a wastewater tracer in surface-groundwater systems.â¢The cost-effectiveness of existing analytical strategies to measure Gd when used as a wastewater tracer in surface-groundwater systems is addressedâ¢A novel analytical strategy for direct determination of total Gd is presented.
RESUMO
Aquatic fate models and risk assessment require experimental information on the potential of contaminants to interact with riverine suspended particulate matter (SPM). While for dissolved contaminants partition or sorption coefficients are used, the underlying assumption of chemical equilibrium is invalid for particulate contaminants, such as engineered nanomaterials, incidental nanoparticles, micro- or nanoplastics. Their interactions with SPM are governed by physicochemical forces between contaminant-particle and SPM surfaces. The availability of a standard SPM material is thus highly relevant for the development of reproducible test systems to evaluate the fate of particulate contaminants in aquatic systems. Finding suitable SPM analogues, however, is challenging considering the complex composition of natural SPM, which features floc-like structures comprising minerals and organic components from the molecular to the microorganism level. Complex composition comes with a heterogeneity in physicochemical surface properties, that cannot be neglected. We developed a procedure to generate SPM analogue flocs from components selected to represent the most abundant and crucial constituents of natural riverine SPM, and the process-relevant SPM surface characteristics regarding interactions with particulate contaminants. Four components, i.e., illite, hematite, quartz and tryptophan, combined at environmentally realistic mass-ratios, were associated to complex flocs. Flocculation was reproducible regarding floc size and fractal dimension, and multiple tests on floc resilience towards physical impacts (agitation, sedimentation-storage-resuspension, dilution) and hydrochemical changes (pH, electrolytes, dissolved organic matter concentration) confirmed their robustness. These reproducible, ready-to-use SPM analogue flocs will strongly support future research on emerging particulate contaminants.
Assuntos
Material Particulado , Poluentes Químicos da Água , Material Particulado/análise , Poluentes Químicos da Água/química , Água Doce , Minerais , Monitoramento Ambiental/métodosRESUMO
Sulfidation and, more recently, nitriding have been recognized as promising modifications to enhance the selectivity of nanoscale zero-valent iron (nZVI) particles for trichloroethene (TCE). Herein, we investigated the performance of iron nitride (FexN) nanoparticles in the removal of a broader range of chlorinated ethenes (CEs), including tetrachloroethene (PCE), cis-1,2-dichloroethene (cis-DCE), and their mixture with TCE, and compared it to the performance of sulfidated nZVI (S-nZVI) prepared from the same precursor nZVI. Two distinct types of iron nitride (FexN) nanoparticles, containing γ'-Fe4N and ε-Fe2-3N phases, exhibited substantially higher PCE and cis-DCE dechlorination rates compared to S-nZVI. A similar effect was observed with a CE mixture, which was completely dechlorinated by both types of FexN nanoparticles within 10 days, whereas S-nZVI was able to remove only about half of the amount, most of which being TCE. Density functional theory calculations further revealed that the cleavage of the first C-Cl bond was the rate-limiting step for all CEs dechlorinated on the γ'-Fe4N(001) surface, with the reaction barriers of PCE and cis-DCE being 29.9, and 40.8 kJ mol-1, respectively. FexN nanoparticles proved to be highly effective in the remediation of PCE, cis-DCE, and mixed CE contamination.
RESUMO
Tire wear particle (TWP)-derived compounds may be of high concern to consumers when released in the root zone of edible plants. We exposed lettuce plants to the TWP-derived compounds diphenylguanidine (DPG), hexamethoxymethylmelamine (HMMM), benzothiazole (BTZ), N-phenyl-N'-(1,3-dimethylbutyl)-p-phenylenediamine (6PPD), and its quinone transformation product (6PPD-q) at concentrations of 1 mg L-1 in hydroponic solutions over 14 days to analyze if they are taken up and metabolized by the plants. Assuming that TWP may be a long-term source of TWP-derived compounds to plants, we further investigated the effect of leaching from TWP on the concentration of leachate compounds in lettuce leaves by adding constantly leaching TWP to the hydroponic solutions. Concentrations in leaves, roots, and nutrient solution were quantified by triple quadrupole mass spectrometry, and metabolites in the leaves were identified by Orbitrap high resolution mass spectrometry. This study demonstrates that TWP-derived compounds are readily taken up by lettuce with measured maximum leaf concentrations between â¼0.75 (6PPD) and 20 µg g-1 (HMMM). Although these compounds were metabolized in the plant, we identified several transformation products, most of which proved to be more stable in the lettuce leaves than the parent compounds. Furthermore, continuous leaching from TWP led to a resupply and replenishment of the metabolized compounds in the lettuce leaves. The stability of metabolized TWP-derived compounds with largely unknown toxicities is particularly concerning and is an important new aspect for the impact assessment of TWP in the environment.
Assuntos
Benzoquinonas , Exposição Ambiental , Lactuca , Fenilenodiaminas , Transporte Biológico , Lactuca/química , Lactuca/metabolismo , Espectrometria de Massas , Borracha/química , Fenilenodiaminas/análise , Fenilenodiaminas/metabolismo , Benzoquinonas/análise , Benzoquinonas/metabolismoRESUMO
The release of fragments from plastic products, that is, secondary microplastics, is a major concern in the context of the global plastic pollution. Currently available (thermoplastic) polyurethanes [(T)PU] are not biodegradable and therefore should be recycled. However, the ester bond in (T)PUs might be sufficiently hydrolysable to enable at least partial biodegradation of polyurethane particles. Here, we investigated biodegradation in compost of different types of (T)PU to gain insights into their fragmentation and biodegradation mechanisms. The studied (T)PUs varied regarding the chemistry of their polymer backbone (aromatic/aliphatic), hard phase content, cross-linking degree, and presence of a hydrolysis-stabilizing additive. We developed and validated an efficient and non-destructive polymer particle extraction process for partially biodegraded (T)PUs based on ultrasonication and density separation. Our results showed that biodegradation rates and extents decreased with increasing cross-linking density and hard-segment content. We found that the presence of a hydrolysis stabilizer reduced (T)PU fragmentation while not affecting the conversion of (T)PU carbon into CO2. We propose a biodegradation mechanism for (T)PUs that includes both mother particle shrinkage by surface erosion and fragmentation. The presented results help to understand structure-degradation relationships of (T)PUs and support recycling strategies.
Assuntos
Plásticos , Poliuretanos , Humanos , Microplásticos , Polímeros , Biodegradação Ambiental , SupuraçãoRESUMO
Particulate emissions from vehicle exhaust catalysts are the primary contributors to platinum group elements (PGEs) being released into roadside environments, especially platinum (Pt) particles. With increasing traffic density, it is essential to quantify the emission, accumulation, and potential health effects of traffic-emitted Pt particles. In this study, three procedures were investigated to extract Pt nanoparticles (NPs) from sediments and characterize them by single-particle inductively coupled plasma time-of-flight mass spectrometry (spICP-TOF-MS). For this purpose, a reference sediment sample was spiked with manufactured Pt NPs. Pt NPs' extraction recoveries reached from 50% up to 102%, depending on the extraction procedure and whether the particle mass or number was used as the metric. Between 17% and 35% of the Pt NPs were found as unassociated Pt NPs and between 31% and 78% as Pt NPs hetero-aggregated with other sediment particles. Multi-elemental analysis of Pt-containing NPs in the pristine sediment revealed frequently co-occurring elements such as Au, Bi, and Ir, which can be used to determine a natural background baseline. Our results demonstrated that spICP-TOF-MS elemental characterization allows for distinguishing anthropogenic Pt NPs from the natural background. In the future, this could enable the sensitive monitoring of PGE release from anthropogenic sources such as vehicle exhausts.
RESUMO
Phthalic acid esters (phthalates) have been detected everywhere in the environment, but data on leaching kinetics and the governing mass transfer process into aqueous systems remain largely unknown. In this study, we experimentally determined time-dependent leaching curves for three phthalates di(2-ethylhexyl) phthalate, di(2-ethylhexyl) terephthalate, and diisononyl phthalate from polyvinyl chloride (PVC) microplastics and thereby enabled a better understanding of their leaching kinetics. This is essential for exposure assessment and to predict microplastic-bound environmental concentrations of phthalates. Leaching curves were analyzed using models for intraparticle diffusion (IPD) and aqueous boundary layer diffusion (ABLD). We show that ABLD is the governing diffusion process for the continuous leaching of phthalates because phthalates are very hydrophobic (partitioning coefficients between PVC and water log KPVC/W were higher than 8.6), slowing down the diffusion through the ABL. Also, the diffusion coefficient in the polymer DPVC is relatively high (â¼8 × 10-14 m2 s-1) and thus enhances IPD. Desorption half-lives of the studied PVC microplastics are greater than 500 years but can be strongly influenced by environmental factors. By combining leaching experiments and modeling, our results reveal that PVC microplastics are a long-term source of phthalates in the environment.
Assuntos
Microplásticos , Ácidos Ftálicos , Ésteres , Plásticos , Polímeros , Cloreto de Polivinila/química , ÁguaRESUMO
Biochars can remove potentially toxic elements, such as inorganic mercury [Hg(II)] from contaminated waters. However, their performance in complex water matrices is rarely investigated, and the combined roles of natural organic matter (NOM) and ionic composition in the removal of Hg(II) by biochar remain unclear. Here, we investigate the influence of NOM and major ions such as chloride (Cl-), nitrate (NO3-), calcium (Ca2+), and sodium (Na+) on Hg(II) removal by a wood-based biochar (SWP700). Multiple sorption sites containing sulfur (S) were located within the porous SWP700. In the absence of NOM, Hg(II) removal was driven by these sites. Ca2+ bridging was important in enhancing removal of negatively charged Hg(II)-chloro complexes. In the presence of NOM, formation of soluble Hg-NOM complexes (as seen from speciation calculations), which have limited access to biochar pores, suppressed Hg(II) removal, but Cl- and Ca2+ could still facilitate it. The ability of Ca2+ to aggregate NOM, including Hg-NOM complexes, promoted Hg(II) removal from the dissolved fraction (<0.45 µm). Hg(II) removal in the presence of Cl- followed a stepwise mechanism. Weakly bound oxygen functional groups in NOM were outcompeted by Cl-, forming smaller-sized Hg(II)-chloro complexes, which could access additional intraparticle sorption sites. Therein, Cl- was outcompeted by S, which finally immobilized Hg(II) in SWP700 as confirmed by extended X-ray absorption fine structure spectroscopy. We conclude that in NOM containing oxic waters, with relatively high molar ratios of Cl-: NOM and Ca2+: NOM, Hg(II) removal can still be effective with SWP700.
Assuntos
Mercúrio , Carvão Vegetal , Íons , Mercúrio/química , Água , MadeiraRESUMO
Understanding the environmental fate of microplastics is essential for their risk assessment. It is essential to differentiate size classes and degradation states. Still, insights into fragmentation and degradation mechanisms of primary and secondary microplastics into micro- and nanoplastic fragments and other degradation products are limited. Here, we present an adapted NanoRelease protocol for a UV-dose-dependent assessment and size-selective quantification of the release of micro- and nanoplastic fragments down to 10 nm and demonstrate its applicability for polyamide and thermoplastic polyurethanes. The tested cryo-milled polymers do not originate from actual consumer products but are handled in industry and are therefore representative of polydisperse microplastics occurring in the environment. The protocol is suitable for various types of microplastic polymers, and the measured rates can serve to parameterize mechanistic fragmentation models. We also found that primary microplastics matched the same ranking of weathering stability as their corresponding macroplastics and that dissolved organics constitute a major rate of microplastic mass loss. The results imply that previously formed micro- and nanoplastic fragments can further degrade into water-soluble organics with measurable rates that enable modeling approaches for all environmental compartments accessible to UV light.
Assuntos
Microplásticos , Poluentes Químicos da Água , Monitoramento Ambiental , Plásticos , Água , Poluentes Químicos da Água/análiseRESUMO
In Europe alone, >200 million m3 of river sediments are dredged each year, part of which are contaminated to such an extent that they have to be landfilled. This study compares the use of biochar and hydrochar for the remediation of sediment contaminated with pentachlorobenzene, hexachlorobenzene, lindane, trifluralin, alachlor, simazine, and atrazine with the motivation to make sediments contaminated by such priority substances usable as arable land for growing energy crops. Biochar and hydrochar originating from Miscanthus giganteus and Beta vulgaris shreds were compared for their potential to reduce contaminant associated risk in sediments. Specifically, by investigating the effects of sorbent amendment rate (1, 5, and 10â¯%) and incubation time (14, 30, and 180â¯d) on contaminant bioaccessibility, toxicity to the bacteria Vibrio fischeri, as well as toxicity and plant uptake in Zea mays. Biochar reduced contaminant bioaccessibility up to five times more than hydrochar. The bioaccessibility of contaminants decreased up to sevenfold with increasing incubation time, indicating that the performance of carbonaceous sorbents may be underestimated in short-term lab experiments. Biochar reduced contaminants toxicity to Vibrio fischeri, whereas hydrochar was itself toxic to the bacteria. Toxicity to Zea mays was determined by contaminant bioaccessibility but also sorbent feedstock with cellulose rich Beta vulgaris based sorbents exhibiting toxic effects. The plant uptake of all contaminants decreased after sorbent amendment.