Benzo-Crown-Ether functionalized O-BODIPY Probes for Cations - A Selective Fluorescent Probe for Ba2.

Herein, we report the synthesis and sensing characteristics of 4,4'-methoxy-substituted BODIPY fluorescent probes (OBODIPYs) 3, 4 and 5 equipped with differently sized benzo-crown ethers (cf. Scheme 1, 3 (benzo-15-crown-5), 4 (benzo-18-crown-6) and 5 (benzo-21-crown7)). O-BODIPYs 3, 4 and 5 exhibited in comparison to their known F-BODIPY analogues 3a, 4a and 5a (cf. Scheme 1) an improved solubility in aqueous medium and higher fluorescence quantum yields. Fluorometric study in aqueous solutions of 3, 4 and 5 in the presence of different cations show cation induced fluorescence enhancements (FE). Compared to the benzo-crown ether substituted F-BODIPY analogues 3a, 4a and 5a, we found for the free O-BODIPYs 3, 4 and 5 higher fluorescence quantum yields (ϕf ) but lower cation induced FEs. We show that in aqueous medium the fluorescence quenching process (OFF switching), a photoinduced electron transfer, in O-BODIPYs 3, 4 and 5 is less effective and consequently sensitive and selective ON switching of the fluorescence by cations, too. Albeit these observations the novel benzo-21-crown-7 equipped fluorescent probe 5 exhibits a good fluorometric Ba2+ selectivity and Ba2+ sensitivity in conjunction to their superior aqueous solubility.

Hilbert Space in Isotopologue Dy(III) SMM Dimers: Dipole Interaction Limit in [163/164Dy2(tmhd)6(tape)]0 Complexes.

Single-molecule magnets are molecular complexes proposed to be useful for information storage and quantum information processing applications. In the quest for multilevel systems that can act as Qudits, two dysprosium-based isotopologues were synthesized and characterized. The isotopologues are [164Dy2(tmhd)6(tape)] (1(I=0)) and [163Dy2(tmhd)6(tape)] (2(I=5/2)), where tmhd = 2,2,6,6-tetramethylheptandionate and tape = 1,6,7,12-tetraazaperylene. Both complexes showed slow relaxation at a zero applied magnetic field with dominant Orbach and Raman relaxation mechanisms. µSQUID studies at milli-Kelvin temperatures reveal quasi-single ion loops, in contrast with the expected S-shape (near zero field) butterfly loops, characteristic of antiferromagnetically coupled dimeric complexes. Through analysis of the low-temperature data, we find that the interaction operating between Dy(III) is small, leading to a small exchange biasing from the zero-field transition. The resulting indirectly coupled nuclear states are degenerate or possess a small energy difference between them. We, therefore, conclude that for the creation of Qudits with enlarged Hilbert spaces, shorter Dy(III)···Dy(III) distances are deemed essential.

Selective and pH-Independent Detection of Ba2+ in Water by a Benzo-21-crown-7-Functionalized BODIPY.

Herein, we report on highly Ba2+ selective fluorescence sensing in water by a fluorescent probe consisting of a benzo-21-crown-7 as a Ba2+ binding unit (ionophore) and a tetramethylated BODIPY fluorophore as a fluorescence reporter. This fluorescent probe showed a Ba2+ induced fluorescence enhancement (FE) by a factor of 12±1 independently of the pH value and a high Ba2+ sensitivity with a limit of detection (LOD) of (17.2±0.3) µM. Moreover, a second fluorescent probe consisting of the same BODIPY fluorophore, but a benzo-18-crown-6 as a cation-responsive binding moiety, showed an even higher FE upon Ba2+ complexation by a factor of 85±3 and a lower LOD of (13±3) µM albeit a lower Ba2+ selectivity. The fluorescence sensing mechanism of Ba2+ was further investigated by time-resolved fluorescence as well as transient absorption spectroscopy (TAS) and it turned out that within these probes a blocking of a photoinduced electron transfer (PET) by Ba2+ is very likely responsible for the FE.

Characterization of an Isostructural MOF Series of Imidazolate Frameworks Potsdam by Means of Sorption Experiments with Water Vapor.

Sorption measurements of water vapor on an isoreticular series of Imidazolate Frameworks Potsdam (IFP), based on penta-coordinated metal centers with secondary building units (SBUs) connected by multidentate amido-imidate-imidazolate linkers, have been carried out at 303.15 K. The isotherm shapes were analyzed in order to gain insight into material properties and compared to sorption experiments with nitrogen at 77.4 K and carbon dioxide at 273.15 K. Results show that water vapor sorption measurements are strongly influenced by the pore size distribution while having a distinct hysteresis loop between the adsorption and desorption branch in common. Thus, IFP-4 and -8, which solely contain micropores, exhibit H4 (type I) isotherm shapes, while those of IFP-1, -2 and -5, which also contain mesopores, are of H3 (type IV) shape with three inflection points. The choice of the used linker substituents and transition metals employed in the framework has a tremendous effect on the material properties and functionality. The water uptake capacities of the examined IFPs are ranging 0.48 mmol g-1 (IFP-4) to 6.99 mmol g-1 (IFP-5) and comparable to those documented for ZIFs. The water vapor stability of IFPs is high, with the exception of IFP-8.

Na+ Selective Fluorescent Tools Based on Fluorescence Intensity Enhancements, Lifetime Changes, and on a Ratiometric Response.

Over the years, we developed highly selective fluorescent probes for K+ in water, which show K+ -induced fluorescence intensity enhancements, lifetime changes, or a ratiometric behavior at two emission wavelengths (cf. Scheme 1, K1-K4). In this paper, we introduce selective fluorescent probes for Na+ in water, which also show Na+ induced signal changes, which are analyzed by diverse fluorescence techniques. Initially, we synthesized the fluorescent probes 2, 4, 5, 6 and 10 for a fluorescence analysis by intensity enhancements at one wavelength by varying the Na+ responsive ionophore unit and the fluorophore moiety to adjust different Kd values for an intra- or extracellular Na+ analysis. Thus, we found that 2, 4 and 5 are Na+ selective fluorescent tools, which are able to measure physiologically important Na+ levels at wavelengths higher than 500 nm. Secondly, we developed the fluorescent probes 7 and 8 to analyze precise Na+ levels by fluorescence lifetime changes. Herein, only 8 (Kd =106 mm) is a capable fluorescent tool to measure Na+ levels in blood samples by lifetime changes. Finally, the fluorescent probe 9 was designed to show a Na+ induced ratiometric fluorescence behavior at two emission wavelengths. As desired, 9 (Kd =78 mm) showed a ratiometric fluorescence response towards Na+ ions and is a suitable tool to measure physiologically relevant Na+ levels by the intensity change of two emission wavelengths at 404 nm and 492 nm.

Systematic Experimental Study on Quantum Sieving of Hydrogen Isotopes in Metal-Amide-Imidazolate Frameworks with narrow 1-D Channels.

Quantum sieving of hydrogen isotopes is experimentally studied in isostructural hexagonal metal-organic frameworks having 1-D channels, named IFP-1, -3, -4 and -7. Inside the channels, different molecules or atoms restrict the channel diameter periodically with apertures larger (4.2 Šfor IFP-1, 3.1 Šfor IFP-3) and smaller (2.1 Šfor IFP-7, 1.7 Šfor IFP-4) than the kinetic diameter of hydrogen isotopes. From a geometrical point of view, no gas should penetrate into IFP-7 and IFP-4, but due to the thermally induced flexibility, so-called gate-opening effect of the apertures, penetration becomes possible with increasing temperature. Thermal desorption spectroscopy (TDS) measurements with pure H2 or D2 have been applied to study isotope adsorption. Further TDS experiments after exposure to an equimolar H2 /D2 mixture allow to determine directly the selectivity of isotope separation by quantum sieving. IFP-7 shows a very low selectivity not higher than S=2. The selectivity of the materials with the smallest pore aperture IFP-4 has a constant value of S≈2 for different exposure times and pressures, which can be explained by the 1-D channel structure. Due to the relatively small cavities between the apertures of IFP-4 and IFP-7, molecules in the channels cannot pass each other, which leads to a single-file filling. Therefore, no time dependence is observed, since the quantum sieving effect occurs only at the outermost pore aperture, resulting in a low separation selectivity.

A Ratiometric Fluorescent Probe for K+ in Water Based on a Phenylaza-18-Crown-6 Lariat Ether.

This work presents two molecular fluorescent probes 1 and 2 for the selective determination of physiologically relevant K+ levels in water based on a highly K+ /Na+ selective building block, the o-(2-methoxyethoxy)phenylaza-18-crown-6 lariat ether unit. Fluorescent probe 1 showed a high K+ -induced fluorescence enhancement (FE) by a factor of 7.7 of the anthracenic emission and a dissociation constant (Kd ) value of 38 mm in water. Further, for 2+K+ , we observed a dual emission behavior at 405 and 505 nm. K+ increases the fluorescence intensity of 2 at 405 nm by a factor of approximately 4.6 and K+ decreases the fluorescence intensity at 505 nm by a factor of about 4.8. Fluorescent probe 2+K+ exhibited a Kd value of approximately 8 mm in Na+ -free solutions and in combined K+ /Na+ solution a similar Kd value of about 9 mm was found, reflecting the high K+ /Na+ selectivity of 2 in water. Therefore, 2 is a promising fluorescent tool to measure ratiometrically and selectively physiologically relevant K+ levels.

Electrospray mass spectrometry and molecular modeling study of formation and stability of silver complexes with diazaperylene and bisisoquinoline.

The complex formation of the following diazaperylene ligands (L) 1,12-diazaperylene 1, 1,1'-bisisoquinoline 2, 2,11-disubstituted 1,12-diazaperylenes (alkyl = methyl, ethyl, isopropyl, 3, 5, 7), 3,3'-disubstituted 1,1'-bisisoquinoline (alkyl = methyl, ethyl, isopropyl, 4, 6, 8 and with R = phenyl, 11 and with pyridine 12), and the 5,8-dimethoxy-substituted diazaperylene 9, 6,6'-dimethoxy-substituted bisisoquinoline 10 with AgBF4 was investigated. Collision-induced dissociation measurements were used to evaluate the relative stabilities of the ligands themselves and for the [1:1]+ complexes as well as for the homoleptic and heteroleptic silver [1:2]+ complexes in the gas phase. This method is very useful in rapid screening of the stabilities of new complexes in the gas phase. The influence of the spatial arrangement of the ligands and the type of substituents employed for the complexation were examined. The effect of the preorganization of the diazaperylene on the threshold activation voltages and thus of the relative binding energies of the different complexes are discussed. Density functional theory calculations were used to calculate the optimized structures of the silver complexes and compared with the stabilities of the complexes in the gas phase for the first time.

The 1,6,7,12-Tetraazaperylene Bridging Ligand as an Electron Reservoir and Its Disulfonato Derivative as Redox Mediator in an Enzyme-Electrode Process.

The homodinuclear ruthenium(II) complex [{Ru(l-N4 Me2 )}2 (µ-tape)](PF6 )4 {[1](PF6 )4 } (l-N4 Me2 =N,N'-dimethyl-2,11-diaza[3.3](2,6)-pyridinophane, tape=1,6,7,12-tetraazaperylene) can store one or two electrons in the energetically low-lying π* orbital of the bridging ligand tape. The corresponding singly and doubly reduced complexes [{Ru(l-N4 Me2 )}2 (µ-tape.- )](PF6 )3 {[2](PF6 )3 } and [{Ru(l-N4 Me2 )}2 (µ-tape2- )](PF6 )2 {[3](PF6 )2 }, respectively, were electrochemically generated, successfully isolated and fully characterized by single-crystal X-ray crystallography, spectroscopic methods and magnetic susceptibility measurements. The singly reduced complex [2](PF6 )3 contains the π-radical tape.- and the doubly reduced [3](PF6 )2 the diamagnetic dianion tape2- as bridging ligand, respectively. Nucleophilic aromatic substitution at the bridging tape in [1]4+ by two sulfite units gave the complex [{Ru(l-N4 Me2 )}2 {µ-tape-(SO3 )2 }]2+ ([4]2+ ). Complex dication [4]2+ was exploited as a redox mediator between an anaerobic homogenous reaction solution of an enzyme system (sulfite/sulfite oxidase) and the electrode via participation of the low-energy π*-orbital of the disulfonato-substituted bridging ligand tape-(SO3 )22- (Ered1 =-0.1 V versus Ag/AgCl/1 m KCl in water).

Highly K+ -Selective Fluorescent Probes for Lifetime Sensing of K+ in Living Cells.

The new K+ -selective fluorescent probes 1 and 2 were obtained by CuI -catalyzed 1,3-dipolar azide alkyne cycloaddition (CuAAC) reactions of an alkyne-substituted [1,3]dioxolo[4,5-f][1,3]benzodioxole (DBD) ester fluorophore with azido-functionalized N-phenylaza-18-crown-6 ether and N-(o-isopropoxy) phenylaza-18-crown-6 ether, respectively. Probes 1 and 2 allow the detection of K+ in the presence of Na+ in water by fluorescence enhancement (2.2 for 1 at 2000 mm K+ and 2.5 for 2 at 160 mm K+ ). Fluorescence lifetime measurements in the absence and presence of K+ revealed bi-exponential decay kinetics with similar lifetimes, however with different proportions changing the averaged fluorescence decay times (τf(av) ). For 1 a decrease of τf(av) from 12.4 to 9.3 ns and for 2 an increase from 17.8 to 21.8 ns was observed. Variation of the substituent in ortho position of the aniline unit of the N-phenylaza-18-crown-6 host permits the modulation of the Kd value for a certain K+ concentration. For example, substitution of H in 1 by the isopropoxy group (2) decreased the Kd value from >300 mm to 10 mm. 2 was chosen for studying the efflux of K+ from human red blood cells (RBC). Upon addition of the Ca2+ ionophor ionomycin to a RBC suspension in a buffer containing Ca2+ , the fluorescence of 2 slightly rose within 10 min, however, after 120 min a significant increase was observed.

Experimental and Theoretical Analysis of the Influence of Different Linker Molecules in Imidazolate Frameworks Potsdam (IFP-n) on the Separation of Olefin-Paraffin Mixtures.

Four metal-organic frameworks with similar topology but different chemical environment inside the pore structure, namely, IFP-1, IFP-3, IFP-5, and IFP-7, have been investigated with respect to the separation potential for olefin-paraffin mixtures as well as the influence of the different linkers on adsorption properties using experiments and Monte Carlo simulations. All IFP structures show a higher adsorption of ethane compared to ethene with the exception of IFP-7 which shows no selectivity in breakthrough experiments. For propane/propane separation, all adsorbents show a higher adsorption for the olefin. The experimental results agree quite well with the simulated values except for the IFP-7, which is presumably due to the flexibility of the structure. Moreover, the experimental and simulated isotherms were confirmed with breakthrough experiments that render IFP-1, IFP-3, and IFP-5 as suitable for the purification of ethene from ethane.

Insights into the pores of microwave-assisted metal-imidazolate frameworks showing enhanced gas sorption.

Microwave heating (MW)-assisted synthesis has been widely applied as an alternative method for the chemical synthesis of organic and inorganic materials. In this work, we report MW-assisted synthesis of three isostructural 3D frameworks with a flexible linker arm of the chelating linker 2-substituted imidazolate-4-amide-5-imidate, named IFP-7-MW (M = Zn, R = OMe), IFP-8-MW (M = Co; R = OMe) and IFP-10-MW (M = Co; R = OEt) (IFP = Imidazolate Framework Potsdam). These chelating ligands were generated in situ by partial hydrolysis of 2-substituted 4,5-dicyanoimidazoles under MW- and also conventional electrical heating (CE)-assisted conditions in DMF. The structure of these materials was determined by IR spectroscopy and powder X-ray diffraction (PXRD) and the identity of the materials synthesized under CE-conditions was established. Materials obtained from MW-heating show many fold enhancement of CO2 and H2 uptake capacities, compared to the analogous CE-heating method based materials. To understand the inner pore-sizes of IFP structures and variations of gas sorptions, we performed positron annihilation lifetime spectroscopy (PALS), which shows that MW-assisted materials have smaller pore sizes than materials synthesized under CE-conditions. The "kinetically controlled" MW-synthesized material has an inherent ability to trap extra linkers, thereby reducing the pore sizes of CE-materials to ultra/micropores. These ultramicropores are responsible for high gas sorption.

Design of Na+ -Selective Fluorescent Probes: A Systematic Study of the Na+ -Complex Stability and the Na+ /K+ Selectivity in Acetonitrile and Water.

There is a tremendous demand for highly Na+ -selective fluoroionophores to monitor the top analyte Na+ in life science. Here, we report a systematic route to develop highly Na+ /K+ selective fluorescent probes. Thus, we synthesized a set of fluoroionophores 1, 3, 4, 5, 8 and 9 (see Scheme ) to investigate the Na+ /K+ selectivity and Na+ - complex stability in CH3 CN and H2 O. These Na+ -probes bear different 15-crown-5 moieties to bind Na+ stronger than K+ . In the set of the diethylaminocoumarin-substituted fluoroionophores 1-5, the following trend of fluorescence quenching 1>3>2>4>5 in CH3 CN was observed. Therefore, the flexibility of the aza-15-crown-5 moieties in 1-4 determines the conjugation of the nitrogen lone pair with the aromatic ring. As a consequence, 1 showed in CH3 CN the highest Na+ -induced fluorescence enhancement (FE) by a factor of 46.5 and a weaker K+ induced FE of 3.7. The Na+ -complex stability of 1-4 in CH3 CN is enhanced in the following order of 2>4>3>1, assuming that the O-atom of the methoxy group in the ortho-position, as shown in 2, strengthened the Na+ -complex formation. Furthermore, we found for the N-(o-methoxyphenyl)aza-15-crown-5 substituted fluoroionophores 2, 8 and 9 in H2 O, an enhanced Na+ -complex stability in the following order 8>2>9 and an increased Na+ /K+ selectivity in the reverse order 9>2>8. Notably, the Na+ -induced FE of 8 (FEF=10.9), 2 (FEF=5.0) and 9 (FEF=2.0) showed a similar trend associated with a decreased K+ -induced FE [8 (FEF=2.7)>2 (FEF=1.5)>9 (FEF=1.1)]. Here, the Na+ -complex stability and Na+ /K+ selectivity is also influenced by the fluorophore moiety. Thus, fluorescent probe 8 (Kd =48 mm) allows high-contrast, sensitive, and selective Na+ measurements over extracellular K+ levels. A higher Na+ /K+ selectivity showed fluorescent probe 9, but also a higher Kd value of 223 mm. Therefore, 9 is a suitable tool to measure Na+ concentrations up to 300 mm at a fluorescence emission of 614 nm.

Study of the Discrepancies between Crystallographic Porosity and Guest Access into Cadmium-Imidazolate Frameworks and Tunable Luminescence Properties by Incorporation of Lanthanides.

An extended member of the isoreticular family of metal-imidazolate framework structures, IFP-6 (IFP=imidazolate framework Potsdam), based on cadmium metal and an in situ functionalized 2-methylimidazolate-4-amide-5-imidate linker is reported. A porous 3D framework with 1D hexagonal channels with accessible pore windows of 0.52 nm has been synthesized by using an ionic liquid (IL) linker precursor. IFP-6 shows significant gas uptake capacity only for CO2 and CH4 at elevated pressure, whereas it does not adsorb N2 , H2 , and CH4 under atmospheric conditions. IFP-6 is assumed to deteriorate at the outside of the material during the activation process. This closing of the metal-organic framework (MOF) pores is proven by positron annihilation lifetime spectroscopy (PALS), which revealed inherent crystal defects. PALS results support the conservation of the inner pores of IFP-6. IFP-6 has also been successfully loaded with luminescent trivalent lanthanide ions (Ln(III) =Tb, Eu, and Sm) in a bottom-up one-pot reaction through the in situ generation of the linker ligand and in situ incorporation of photoluminescent Ln ions into the constituting network. The results of photoluminescence investigations and powder XRD provide evidence that the Ln ions are not doped as connectivity centers into the frameworks, but are instead located within the pores of the MOFs. Under UV light irradiation, Tb@IFP-6 and Eu@IFP-6 (λexc =365 nm) exhibit observable emission changes to a greenish and reddish color, respectively, as a result of strong Ln 4 f emissions.

Use of a 4,5-dicyanoimidazolate anion based ionic liquid for the synthesis of iron and silver nanoparticles.

Sixteen new ionic liquids (ILs) with tetraethylammonium, 1-butyl-3-methylimidazolium, 3-methyl-1-octylimidazolium and tetrabutylphosphonium cations paired with 2-substituted 4,5-dicyanoimidazolate anions (substituent at C2 = methyl, trifluoromethyl, pentafluoroethyl, N,N'-dimethyl amino and nitro) have been synthesized and characterized by using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA). The effects of cation and anion type and structure of the resulting ILs, including several room temperature ionic liquids (RTILs), are reflected in the crystallization, melting points and thermal decomposition of the ILs. ILs exhibited large liquid and crystallization ranges and formed glasses on cooling with glass transition temperatures in the range of -22 to -71 °C. We selected one of the newly designed ILs due to its bigger size, compared to the common conventional IL anion and high electron-withdrawing nitrile group leads to an overall stabilization anion that may stabilize the metal nanoparticles. Stable and better separated iron and silver nanoparticles are obtained by the decomposition of corresponding Fe2(CO)9 and AgPF6, respectively, under N2-atmosphere in newly designed nitrile functionalized 4,5-dicyanoimidazolate anion based IL. Very small and uniform size for Fe-nanoparticles of about 1.8 ± 0.6 nm were achieved without any additional stabilizers or capping molecules. Comparatively bigger size of Ag-nanoparticles was obtained through the reduction of AgPF6 by hydrogen gas. Additionally, the AgPF6 precursor was decomposed under microwave irradiation (MWI), fabricating nut-in-shell-like, that is, core-separated-from-shell Ag-nano-structures.

Breaking Down Chemical Weapons by Metal-Organic Frameworks.

Seek and destroy: Filtration schemes and self-detoxifying protective fabrics based on the Zr(IV)-containing metal-organic frameworks (MOFs) MOF-808 and UiO-66 doped with LiOtBu have been developed that capture and hydrolytically detoxify simulants of nerve agents and mustard gas. Both MOFs function as highly catalytic elements in these applications.

A Highly K(+) -Selective Fluorescent Probe - Tuning the K(+) -Complex Stability and the K(+) /Na(+) Selectivity by Varying the Lariat-Alkoxy Unit of a Phenylaza[18]crown-6 Ionophore.

A desirable goal is to synthesize easily accessible and highly K(+) /Na(+) -selective fluoroionophores to monitor physiological K(+) levels in vitro and in vivo. Therefore, highly K(+) /Na(+) -selective ionophores have to be developed. Herein, we obtained in a sequence of only four synthetic steps a set of K(+) -responsive fluorescent probes 4, 5 and 6. In a systematic study, we investigated the influence of the alkoxy substitution in ortho position of the aniline moiety in π-conjugated aniline-1,2,3-triazole-coumarin-fluoroionophores 4, 5 and 6 [R=MeO (4), EtO (5) and iPrO (6)] towards the K(+) -complex stability and K(+) /Na(+) selectivity. The highest K(+) -complex stability showed fluoroionophore 4 with a dissociation constant Kd of 19 mm, but the Kd value increases to 31 mm in combined K(+) /Na(+) solutions, indicating a poor K(+) /Na(+) selectivity. By contrast, 6 showed even in the presence of competitive Na(+) ions equal Kd values (Kd (K+) =45 mm and Kd (K+/Na+) =45 mm) and equal K(+) -induced fluorescence enhancement factors (FEFs=2.3). Thus, the fluorescent probe 6 showed an outstanding K(+) /Na(+) selectivity and is a suitable fluorescent tool to measure physiological K(+) levels in the range of 10-80 mm in vitro. Further, the isopropoxy-substituted N-phenylaza[18]crown-6 ionophore in 6 is a highly K(+) -selective building block with a feasible synthetic route.

Microwave-Assisted Synthesis of Defects Metal-Imidazolate-Amide-Imidate Frameworks and Improved CO2 Capture.

In this work, we report three isostructural 3D frameworks, named IFP-11 (R = Cl), IFP-12 (R = Br), and IFP-13 (R = Et) (IFP = Imidazolate Framework Potsdam) based on a cobalt(II) center and the chelating linker 2-substituted imidazolate-4-amide-5-imidate. These chelating ligands were generated in situ by partial hydrolysis of 2-substituted 4,5-dicyanoimidazoles under microwave (MW)-assisted conditions in DMF. Structure determination of these IFPs was investigated by IR spectroscopy and a combination of powder X-ray diffraction (PXRD) with structure modeling. The structural models were initially built up from the single-crystal X-ray structure determination of IFP-5 (a cobalt center and 2-methylimidazolate-4-amide-5-imidate linker based framework) and were optimized by using density functional theory calculations. Substitution on position 2 of the linker (R = Cl, Br, and Et) in the isostructural IFP-11, -12, and -13 allowed variation of the potential pore window in 1D hexagonal channels (3.8 to 1.7 Å). The potential of the materials to undergo specific interactions with CO2 was measured by the isosteric heat of adsorption. Further, we resynthesized zinc based IFPs, namely IFP-1 (R = Me), IFP-2 (R = Cl), IFP-3 (R = Br), and IFP-4 (R = Et), and cobalt based IFP-5 under MW-assisted conditions with higher yield. The transition from a nucleation phase to the pure crystalline material of IFP-1 in MW-assisted synthesis depends on reaction time. IFP-1, -3, and -5, which are synthesized by MW-assisted conditions, showed an enhancement of N2 and CO2, compared to the analogous conventional electrical (CE) heating method based materials due to crystal defects.

A Highly K(+)-Selective Two-Photon Fluorescent Probe.

A highly K(+)-selective two-photon fluorescent probe for the in vitro monitoring of physiological K(+) levels in the range of 1-100 mM is reported. The two-photon excited fluorescence (TPEF) probe shows a fluorescence enhancement (FE) by a factor of about three in the presence of 160 mM K(+), independently of one-photon (OP, 430 nm) or two-photon (TP, 860 nm) excitation and comparable K(+)-induced FEs in the presence of competitive Na(+) ions. The estimated dissociation constant (Kd ) values in Na(+)-free solutions (Kd (OP) =(28±5) mM and Kd (TP)=(36±6) mM) and in combined K(+)/Na(+) solutions (Kd (OP) =(38±8) mM and Kd (TP)=(46±25) mM) reflecting the high K(+)/Na(+) selectivity of the fluorescent probe. The TP absorption cross-section (σ2PA ) of the TPEF probe+160 mM K(+) is 26 GM at 860 nm. Therefore, the TPEF probe is a suitable tool for the in vitro determination of K(+).

Crystal structure of (2,11-di-aza-[3.3](2,6)pyridino-phane-κ (4) N,N',N'',N''')(1,6,7,12-tetra-aza-perylene-κ (2) N (1),N (12))ruthenium(II) bis-(hexa-fluorido-phosphate) aceto-nitrile 1.422-solvate.

In the title compound, [Ru(C14H16N4)(C16H8N4)](PF6)2·1.422CH3CN, discrete dimers of complex cations, [Ru(L-N4H2)tape](2+) are formed {L-N4H2 = 2,11-di-aza-[3.3](2,6)pyridino-phane; tape = 1,6,7,12-tetra-aza-perylene}, held together by π-π stacking inter-actions via the tape ligand moieties with a centroid-centroid distance of 3.49 (2) Å, assisted by hydrogen bonds between the non-coordinating tape ligand α,α'-di-imine unit and the amine proton of a 2,11-di-aza-[3.3](2,6)-pyridino-phane ligand of the opposite complex cation. The combination of these inter-actions leads to an unusual nearly face-to-face π-π stacking mode. Additional weak C-H⋯N, C-H⋯F, N-H⋯F and P-F⋯π-ring (tape, py) (with F⋯centroid distances of 2.925-3.984 Å) inter-actions are found, leading to a three-dimensional architecture. The Ru(II) atom is coordinated in a distorted octa-hedral geometry, particularly manifested by the Namine-Ru-Namine angle of 153.79 (10)°. The counter-charge is provided by two hexa-fluorido-phosphate anions and the asymmetric unit is completed by aceto-nitrile solvent mol-ecules of crystallization. Disorder was observed for both the hexa-fluorido-phosphate anions as well as the aceto-nitrile solvate mol-ecules, with occupancies for the major moieties of 0.801 (6) for one of the PF6 anions, and a shared occupancy of 0.9215 (17) for the second PF6 anion and a partially occupied aceto-nitrile mol-ecule. A second CH3CN mol-ecule is fully occupied, but 1:1 disordered across a crystallographic inversion center.