Iron(iv) alkyl complexes: electronic structure contributions to Fe-C bond homolysis and migration reactions that form N-C bonds from N2.

High-valent iron alkyl complexes are rare, as they are prone to Fe-C bond homolysis. Here, we describe an unusual way to access formally iron(iv) alkyl complexes through double silylation of iron(i) alkyl dinitrogen complexes to form an NNSi2 group. Spectroscopically validated computations show that the disilylehydrazido(2-) ligand stabilizes the formal iron(iv) oxidation state through a strongly covalent Fe-N π-interaction, in which one π-bond fits an "inverted field" description. This means that the two bonding electrons are localized more on the metal than the ligand, and thus an iron(ii) resonance structure is a significant contributor, similar to the previously-reported phenyl analogue. However, in contrast to the phenyl complex which has an S = 1 ground state, the ground state of the alkyl complex is S = 2, which places one electron in the π* orbital, leading to longer and weaker Fe-N bonds. The reactivity of these hydrazido(2-) complexes is dependent on the steric and electronic properties of the specific alkyl group. When the alkyl group is the bulky trimethylsilylmethyl, the formally iron(iv) species is stable at room temperature and no migration of the alkyl ligand is observed. However, the analogous complex with the smaller methyl ligand does indeed undergo migration of the carbon-based ligand to the NNSi2 group to form a new N-C bond. This migration is followed by isomerization of the hydrazido ligand, and the product exists as two isomers that have distinct η1 and η2 binding of the hydrazido group. Lastly, when the alkyl group is benzyl, the Fe-C bond homolyzes to give a three-coordinate hydrazido(2-) complex which is likely due to the greater stability of a benzyl radical compared to that for methyl or trimethylsilylmethyl. These studies demonstrate the availability of a hydrocarbyl migration pathway at formally iron(iv) centers to form new N-C bonds directly to N2, though product selectivity is highly dependent on the identity of the migrating group.

Three-Coordinate Nickel and Metal-Metal Interactions in a Heterometallic Iron-Sulfur Cluster.

Biological multielectron reactions often are performed by metalloenzymes with heterometallic sites, such as anaerobic carbon monoxide dehydrogenase (CODH), which has a nickel-iron-sulfide cubane with a possible three-coordinate nickel site. Here, we isolate the first synthetic iron-sulfur clusters having a nickel atom with only three donors, showing that this structural feature is feasible. These have a core with two tetrahedral irons, one octahedral tungsten, and a three-coordinate nickel connected by sulfide and thiolate bridges. Electron paramagnetic resonance (EPR), Mössbauer, and superconducting quantum interference device (SQUID) data are combined with density functional theory (DFT) computations to show how the electronic structure of the cluster arises from strong magnetic coupling between the Ni, Fe, and W sites. X-ray absorption spectroscopy, together with spectroscopically validated DFT analysis, suggests that the electronic structure can be described with a formal Ni1+ atom participating in a nonpolar Ni-W σ-bond. This metal-metal bond, which minimizes spin density at Ni1+, is conserved in two cluster oxidation states. Fe-W bonding is found in all clusters, in one case stabilizing a local non-Hund state at tungsten. Based on these results, we compare different M-M interactions and speculate that other heterometallic clusters, including metalloenzyme active sites, could likewise store redox equivalents and stabilize low-valent metal centers through metal-metal bonding.

Electronic Structure of Three-Coordinate FeII and CoII ß-Diketiminate Complexes.

The ß-diketiminate supporting group, [ArNCRCHCRNAr]-, stabilizes low coordination number complexes. Four such complexes, where R = tert-butyl, Ar = 2,6-diisopropylphenyl, are studied: (nacnactBu)ML, where M = FeII, CoII and L = Cl, CH3. These are denoted FeCl, FeCH3, CoCl, and CoCH3 and have been previously reported and structurally characterized. The two FeII complexes (S = 2) have also been previously characterized by Mössbauer spectroscopy, but only indirect assessment of the ligand-field splitting and zero-field splitting (zfs) parameters was available. Here, EPR spectroscopy is used, both conventional field-domain for the CoII complexes (with S = 3/2) and frequency-domain, far-infrared magnetic resonance spectroscopy (FIRMS) for all four complexes. The CoII complexes were also studied by magnetometry. These studies allow accurate determination of the zfs parameters. The two FeII complexes are similar with nearly axial zfs and large magnitude zfs given by D = -37 ± 1 cm-1 for both. The two CoII complexes likewise exhibit large and nearly axial zfs, but surprisingly, CoCl has positive D = +55 cm-1 while CoCH3 has negative D = -49 cm-1. Theoretical methods were used to probe the electronic structures of the four complexes, which explain the experimental spectra and the zfs parameters.

Evaluating Diazene to N2 Interconversion at Iron-Sulfur Complexes.

Biological N2 reduction occurs at sulfur-rich multiiron sites, and an interesting potential pathway is concerted double reduction/ protonation of bridging N2 through PCET. Here, we test the feasibility of using synthetic sulfur-supported diiron complexes to mimic this pathway. Oxidative proton transfer from µ-η1 : η1-diazene (HN=NH) is the microscopic reverse of the proposed N2 fixation pathway, revealing the energetics of the process. Previously, Sellmann assigned the purple metastable product from two-electron oxidation of [{Fe2+(PPr3)L1}2(µ-η1 : η1-N2H2)] (L1=tetradentate SSSS ligand) at -78 °C as [{Fe2+(PPr3)L1}2(µ-η1 : η1-N2)]2+, which would come from double PCET from diazene to sulfur atoms of the supporting ligands. Using resonance Raman, Mössbauer, NMR, and EPR spectroscopies in conjunction with DFT calculations, we show that the product is not an N2 complex. Instead, the data are most consistent with the spectroscopically observed species being the mononuclear iron(III) diazene complex [{Fe(PPr3)L1}(η2-N2H2)]+. Calculations indicate that the proposed double PCET has a barrier that is too high for proton transfer at the reaction temperature. Also, PCET from the bridging diazene is highly exergonic as a result of the high Fe3+/2+ redox potential, indicating that the reverse N2 protonation would be too endergonic to proceed. This system establishes the "ground rules" for designing reversible N2/N2H2 interconversion through PCET, such as tuning the redox potentials of the metal sites.

Mechanism of Alkene Hydrofunctionalization by Oxidative Cobalt(salen) Catalyzed Hydrogen Atom Transfer.

Oxidative MHAT hydrofunctionalization of alkenes provides a mild cobalt-catalyzed route to forming C-N and C-O bonds. Here, we characterize relevant salen-supported cobalt complexes and their reactions with alkenes, silanes, oxidant, and solvent. These stoichiometric investigations are complemented by kinetic studies of the catalytic reaction and catalyst speciation. We describe the solution characterization of an elusive cobalt(III) fluoride complex, which surprisingly is not the species that reacts with silane under catalytic conditions; rather, a cobalt(III) aquo complex is more active. Accordingly, the addition of water (0.15 M) speeds the catalytic reaction, and kinetic studies show that water addition enables catalytic product formation in 2 h at -50 °C in acetone. Under these conditions, cobalt(III) resting states can be observed by UV-vis spectrophotometry, including a cobalt(III)-alkyl complex. It comes from a transient cobalt(III) hydride complex that is formed in the turnover-limiting step of the catalytic cycle. This hydride readily degrades but not to H2; it releases H+ through a bimetallic pathway that explains the [Co]2 dependence of the off-cycle reaction. In contrast, the rate of the catalytic reaction follows the power law kobs[Co]1[silane]1. Because of the different [Co] dependence of the catalytic reaction and the degradation reaction, lower catalyst loading improves the yield of the catalytic reaction by reducing the relative rate of unproductive silane/oxidant consumption. These studies illuminate mechanistic details of oxidative MHAT hydrofunctionalization of alkenes and lay the groundwork for understanding other catalytic reactions mediated by cobalt hydride and cobalt alkyl complexes.

Mössbauer and Nuclear Resonance Vibrational Spectroscopy Studies of Iron Species Involved in N-N Bond Cleavage.

Diketiminate-supported iron complexes are capable of cleaving the strong triple bond of N2 to give a tetra-iron complex with two nitrides (Rodriguez et al., Science, 2011, 334, 780-783). The mechanism of this reaction has been difficult to determine, but a transient green species was observed during the reaction that corresponds to a potential intermediate. Here, we describe studies aiming to identify the characteristics of this intermediate, using a range of spectroscopic techniques, including Mössbauer spectroscopy, electronic absorption spectroscopy, Raman spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, and nuclear resonance vibrational spectroscopy (NRVS) complemented by density functional theory (DFT) calculations. We successfully elucidated the nature of the starting iron(II) species and the bis(nitride) species in THF solution, and in each case, THF breaks up the multiiron species. Various observations on the green intermediate species indicate that it has one N2 per two Fe atoms, has THF associated with it, and has NRVS features indicative of bridging N2. Computational models with a formally diiron(0)-N2 core are most consistent with the accumulated data, and on this basis, a mechanism for N2 splitting is suggested. This work shows the power of combining NRVS, Mössbauer, NMR, and vibrational spectroscopies with computations for revealing the nature of transient iron species during N2 cleavage.

Well-Defined Iron Sites in Crystalline Carbon Nitride.

Carbon nitride materials can be hosts for transition metal sites, but Mössbauer studies on iron complexes in carbon nitrides have always shown a mixture of environments and oxidation states. Here we describe the synthesis and characterization of a crystalline carbon nitride with stoichiometric iron sites that all have the same environment. The material (formula C6N9H2Fe0.4Li1.2Cl, abbreviated PTI/FeCl2) is derived from reacting poly(triazine imide)·LiCl (PTI/LiCl) with a low-melting FeCl2/KCl flux, followed by anaerobic rinsing with methanol. X-ray diffraction, X-ray absorption and Mössbauer spectroscopies, and SQUID magnetometry indicate that there are tetrahedral high-spin iron(II) sites throughout the material, all having the same geometry. The material is active for electrocatalytic nitrate reduction to ammonia, with a production rate of ca. 0.1 mmol cm-2 h-1 and Faradaic efficiency of ca. 80% at -0.80 V vs RHE.

Valence Delocalization and Metal-Metal Bonding in Carbon-Bridged Mixed-Valence Iron Complexes.

The carbide ligand in the iron-molybdenum cofactor (FeMoco) in nitrogenase bridges iron atoms in different oxidation states, yet it is difficult to discern its ability to mediate magnetic exchange interactions due to the structural complexity of the cofactor. Here, we describe two mixed-valent diiron complexes with C-based ketenylidene bridging ligands, and compare the carbon bridges with the more familiar sulfur bridges. The ground state of the [Fe2 (µ-CCO)2 ]+ complex with two carbon bridges (4) is S= 1 / 2 ${{ 1/2 }}$ , and it is valence delocalized on the Mössbauer timescale with a small thermal barrier for electron hopping that stems from the low Fe-C force constant. In contrast, one-electron reduction of the [Fe2 (µ-CCO)] complex with one carbon bridge (2) affords a mixed-valence species with a high-spin ground state (S= 7 / 2 ${ 7/2 }$ ), and the Fe-Fe distance contracts by 1 Å. Spectroscopic, magnetic, and computational studies of the latter reveal an Fe-Fe bonding interaction that leads to complete valence delocalization. Analysis of near-IR intervalence charge transfer transitions in 5 indicates a very large double exchange constant (B) in the range of 780-965 cm-1 . These results show that carbon bridges are extremely effective at stabilizing valence delocalized ground states in mixed-valent iron dimers.

Dinitrogen Binding and Functionalization from a Low-Coordinate Alkynyliron Complex.

Alkynyl complexes of low-coordinate transition metals offer a sterically open environment and interesting bonding opportunities. Here, we explore the capacity of iron(I) alkynyl complexes to bind N2 and isolate a N2 complex including its X-ray crystal structure. Silylation of the N2 complex gives an isolable, formally iron(IV) complex with a disilylhydrazido(2-) ligand, but natural bond orbital analysis indicates that an iron(II) formulation is preferable. The structure of this compound is similar to an earlier reported phenyl complex in which phenyl migration forms a new N-C bond, but the alkynyl group does not migrate. DFT calculations are used to test the possible reasons why the alkynyl is resistant to migration, and these show that the large Fe-C bond energy in the alkynyl complex is a factor that could contribute to the lack of migration.

Catalytic reduction of dinitrogen to ammonia using molybdenum porphyrin complexes.

Porphyrin complexes are well-known in O2 and CO2 reduction, but their application to N2 reduction is less developed. Here, we show that oxo and nitrido complexes of molybdenum supported by tetramesitylporphyrin (TMP) are effective precatalysts for catalytic N2 reduction to ammonia, verified by 15N2 labeling studies and other control experiments. Spectroscopic and electrochemical studies illuminate some relevant thermodynamic parameters, including the N-H bond dissociation free energy of (TMP)MoNH (43 ± 2 kcal mol-1). We place these results in the context of other work on homogeneous N2 reduction catalysis.

Dynamic effects on ligand field from rapid hydride motion in an iron(ii) dimer with an S = 3 ground state.

Hydride complexes are important in catalysis and in iron-sulfur enzymes like nitrogenase, but the impact of hydride mobility on local iron spin states has been underexplored. We describe studies of a dimeric diiron(ii) hydride complex using X-ray and neutron crystallography, Mössbauer spectroscopy, magnetism, DFT, and ab initio calculations, which give insight into the dynamics and the electronic structure brought about by the hydrides. The two iron sites in the dimer have differing square-planar (intermediate-spin) and tetrahedral (high-spin) iron geometries, which are distinguished only by the hydride positions. These are strongly coupled to give an S total = 3 ground state with substantial magnetic anisotropy, and the merits of both localized and delocalized spin models are discussed. The dynamic nature of the sites is dependent on crystal packing, as shown by changes during a phase transformation that occurs near 160 K. The change in dynamics of the hydride motion leads to insight into its influence on the electronic structure. The accumulated data indicate that the two sites can trade geometries by rotating the hydrides, at a rate that is rapid above the phase transition temperature but slow below it. This small movement of the hydrides causes large changes in the ligand field because they are strong-field ligands. This suggests that hydrides could be useful in catalysis not only due to their reactivity, but also due to their ability to rapidly modulate the local electronic structure and spin states at metal sites.

Mechanism of Nitrogen-Carbon Bond Formation from Iron(IV) Disilylhydrazido Intermediates during N2 Reduction.

We recently reported a reaction sequence that activates C-H bonds in simple arenes as well as the N-N triple bond in N2, delivering the aryl group to N2 to form a new N-C bond (Nature 2020, 584, 221). This enables the transformation of abundant feedstocks (arenes and N2) into N-containing organic compounds. The key N-C bond forming step occurs upon partial silylation of N2. However, the pathway through which reduction, silylation, and migration occurred was unknown. Here, we describe synthetic, structural, magnetic, spectroscopic, kinetic, and computational studies that elucidate the steps of this transformation. N2 must be silylated twice at the distal N atom before aryl migration can occur, and sequential silyl radical and silyl cation addition is a kinetically competent pathway to a formally iron(IV)-NN(SiMe3)2 intermediate that can be isolated at low temperature. Kinetic studies show its first-order conversion to the migrated product, and DFT calculations indicate a concerted transition state for migration. The electronic structure of the formally iron(IV) intermediate is examined using DFT and CASSCF calculations, which reveal contributions from iron(II) and iron(III) resonance forms with oxidized NNSi2 ligands. The depletion of electron density from the Fe-coordinated N atom makes it electrophilic enough to accept the incoming aryl group. This new pathway for the N-C bond formation offers a method for functionalizing N2 using organometallic chemistry.

Lewis Structures and the Bonding Classification of End-on Bridging Dinitrogen Transition Metal Complexes.

The activation of dinitrogen by coordination to transition metal ions is a widely used and promising approach to the utilization of Earth's most abundant nitrogen source for chemical synthesis. End-on bridging N2 complexes (µ-η1:η1-N2) are key species in nitrogen fixation chemistry, but a lack of consensus on the seemingly simple task of assigning a Lewis structure for such complexes has prevented application of valence electron counting and other tools for understanding and predicting reactivity trends. The Lewis structures of bridging N2 complexes have traditionally been determined by comparing the experimentally observed NN distance to the bond lengths of free N2, diazene, and hydrazine. We introduce an alternative approach here and argue that the Lewis structure should be assigned based on the total π-bond order in the MNNM core (number of π-bonds), which derives from the character (bonding or antibonding) and occupancy of the delocalized π-symmetry molecular orbitals (π-MOs) in MNNM. To illustrate this approach, the complexes cis,cis-[(iPr4PONOP)MCl2]2(µ-N2) (M = W, Re, and Os) are examined in detail. Each complex is shown to have a different number of nitrogen-nitrogen and metal-nitrogen π-bonds, indicated as, respectively: W≡N-N≡W, Re═N═N═Re, and Os-N≡N-Os. It follows that each of these Lewis structures represents a distinct class of complexes (diazanyl, diazenyl, and dinitrogen, respectively), in which the µ-N2 ligand has a different electron donor number (total of 8e-, 6e-, or 4e-, respectively). We show how this classification can greatly aid in understanding and predicting the properties and reactivity patterns of µ-N2 complexes.

Intermolecular Hydroalkoxylation and Hydrocarboxylation of 2-Azadienes with High Efficiency.

Described here is a method for intermolecular hydroalkoxylation and hydrocarboxylation of 2-azadienes through cobalt-catalyzed hydrogen atom transfer and oxidation. This protocol provides a source of 2-azaallyl cation equivalents under mild conditions, is chemoselective in the presence of other C═C double bonds, and requires no excess amount of added alcohol or oxidant. Mechanistic studies suggest that the selectivity arises from lowering the transition state that leads to the highly stabilized 2-azaallyl radical.

Small, Electron-Donating Substituents Give CO2 Activation by Permethylpentalene Zirconium Amido Complexes the Upper Hand: A DFT Study of Distortion and Interaction.

An insight into factors controlling CO2 activation is necessary to develop molecular systems that utilize CO2 as a chemical feedstock. Two permethylpentalene zirconium cyclopentadienyl (mono)amido complexes, Pn*ZrCp(NR2), were previously assessed for CO2 activation, and a strong dependence on the amido substituent was observed. The R = Me analogue reacted rapidly and quantitatively at room temperature to form the carbamato complex, while the R = Ph species was inert. Here, we investigate the origin of this reactivity difference using DFT and the distortion-interaction model to characterize steric and electronic contributions to the activation barrier. We find that the barrier for CO2 insertion with R = Me (19.1 kcal/mol) is lower than with R = Ph (36.6 kcal/mol), explaining the inertness of the Ph-substituted analogue. The distortion energy trend follows the steric bulk of the amido substituents, and the bulkier Ph-substituted complex has a consistently higher distortion energy along its potential energy surface than that of the Me-substituted complex. The interaction energy trend follows the electronics, and a more electron-donating Me-substituted complex shows a consistently lower interaction energy. The balance of these effects at the corresponding TS gives a reduced activation barrier. Small, electron-donating substituents therefore facilitate CO2 activation in these complexes.