Tailored fabrication of biodegradable polymer/ Fe3O4 doped WO3 nano star-based porous membrane with enhanced photo fentonic activity for environmental remediation.

The accelerated development of special-wetting polymeric materials with hierarchical pores for membrane applications is crucial to effectively separating water-soluble and insoluble pollutants, such as oily wastewater, emulsion, organic pollutants, and heavy metals. This pressing environmental and socioeconomic issue requires the implementation of effective remediation technologies. In this study, we successfully fabricated an environmentally friendly membrane with a flexible property by combining biopolymers and magnetic nanohybrids of iron oxide (Fe3O4)-doped tungsten oxide (WO3) through a thermal-induced phase separation process (TIPS). The resulting membrane exhibited a well-defined 3D-interconnected porous network structure when blending poly (ε-caprolactone)/poly (D,L-lactide) (PCL)/(PDLLA) in an 8:2 volume ratio. The Fe3O4@WO3 nanohybrids were synthesized using a hydrothermal process, resulting in a star-shaped morphology from the sea urchin-like WO3 clusters, which showed great potential to efficiently separate water/oil contamination and facilitate visible-light-driven photocatalytic degradation of organic dyes (MB, Rh B, BY, and CR) and photoreduction of hexavalent chromium (Cr (VI)). The obtained PCL/PDLLA/Fe3O4@WO3 nanocomposite membrane demonstrated hydrophobic properties, showing a water contact angle of 95 ± 2° and an excellent oil adsorption capacity of ∼4-4.5 g/g without fouling. The interconnected porous structure of the composite membrane enabled the efficient separation of emulsions (≥99.4 %) and achieved a high permeation flux of up to 1524 L m-2 h-1 under gravity separation. Overall, we obtained a novel high-performance composite material with specialized wetting properties, offering significant potential for effectively removing insoluble and soluble organic contaminants from wastewater.

Effectively Reinforced α-Bi2O3 MPs/PDA-RGO Sensor for Selective Modality Sensing of a Hazardous Phenolic Compound.

The phenolic compound trichlorophenol (TCP) is an ingredient in fungicides and herbicides. This compound's high stability, bioaccumulation, toxicity, and poor biodegradability result in severe environmental and biological health issues. Consequently, it is crucial to have an affordable and sensitive method for detecting TCP in environmental samples. In this study, α-phase bismuth oxide microplates and polydopamine-functionalized reduced graphene oxide (α-Bi2O3 MPs/PDA-RGO) were synthesized using a simple ultrasonic method and characterized with various analytical and physical characterizations. The conversion of the catechol moieties present in the resulting PDA-RGO material into quinones facilitates productive interactions with diverse functional groups, such as hydroxyl, amine, and imine. Consequently, the compounds 2,4,6-trichlorophenol (TCP) engages in electrochemical interactions with the aforementioned functional groups. As a result, TCP shows more excellent selectivity on the designed α-Bi2O3 MPs/PDA-RGO/SPCE sensor. Under the optimized conditions, the sensor demonstrated a lower detection limit (0.0042 µM), a limit of quantification (0.0078 µM), good sensitivity (2.24 µA µM-1 cm2), a wide linear range (0.019-190.7 and 212.7-1649 µM), and pinpoint specificity. The efficacy of the sensor is additionally validated through the accurate identification of TCP residues in water, soil, and food samples.

High Selectivity Fuel from Efficient CO2 Conversion by Zn-Modified rGO and Amine-Functionalized CuO as a Photocatalyst.

Reduced graphene oxide (rGO) has been used in copper (II) oxide (CuO)-based photocatalysts as an additive material. An application of this CuO-based photocatalyst is in the CO2 reduction process. The preparation of rGO by a Zn-modified Hummers' method has resulted in a high quality of rGO in terms of excellent crystallinity and morphology. However, implementing Zn-modified rGO in CuO-based photocatalysts for the CO2 reduction process has yet to be studied. Therefore, this study explores the potential of combining Zn-modified rGO with CuO photocatalysts and performing these rGO/CuO composite photocatalysts to convert CO2 into valuable chemical products. The rGO was synthesized by using a Zn-modified Hummers' method and covalently grafted with CuO by amine functionalization with three different compositions (1:10, 1:20, and 1:30) of rGO/CuO photocatalyst. XRD, FTIR, and SEM were used to investigate the crystallinity, chemical bonds, and morphology of the prepared rGO and rGO/CuO composites. The performance of rGO/CuO photocatalysts for the CO2 reduction process was quantitively measured by GC-MS. We found that the rGO showed successful reduction using a Zn reducing agent. The rGO sheet could be grafted with CuO particles and resulted in a good morphology of rGO/CuO, as shown from the XRD, FTIR, and SEM results. The rGO/CuO material showed photocatalytic performance due to the advantages of synergistic components and resulted in methanol, ethanolamine, and aldehyde as fuel with amounts of 37.12, 8730, and 17.1 mmol/g catalyst, respectively. Meanwhile, adding CO2 flow time increases the resulting quantity of the product. In conclusion, the rGO/CuO composite could have potential for large-scale CO2 conversion and storage applications.

Bio-mineralized tin/bismuth oxide nanoparticles with silk fibroins for efficient electrochemical detection of 2-nitroaniline in river water samples.

In recent years, the usage of nitroaniline has played a vital role in pharmaceutical formulations as it is a crucial ingredient in the synthesis of pesticides and dyes. However, the level of nitroaniline existing in industrial waste keeps rising the environmental contamination. Thus, monitoring of active nitro-residuals becomes more significant in reducing the toxicity of the ecosystem. Therefore, we have taken an attempt to evaluate the hazardous pollutant 2-nitroaniline (2-NA) using the electrocatalyst viz., tin-doped bismuth oxide inserted on a biopolymer silk fibroin composite modified glassy carbon electrode (Sn-Bi2O3/SF@GCE). The Sn-Bi2O3/SF nanocomposite was synthesized through hydrothermal and co-precipitation methods. The physicochemical properties of the prepared Sn-Bi2O3/SF hybrid composite were examined by conventional microscopy and spectroscopic techniques like FE-SEM, HR-TEM, XRD, FTIR, Raman, and XPS. Furthermore, the bio-mineralized Sn-Bi2O3/SF@GCE displayed a wide linear range (0.009 µM-785.7 µM) and a lower detection limit (3.5 nM) with good sensitivity for 2-NA detection under the optimum conditions. The result shows that the Sn-Bi2O3/SF-modified GCE has good reproducibility, repeatability, and excellent selectivity for 2-NA detection in the presence of other co-interfering compounds. Moreover, the practical applicability of Sn-Bi2O3/SF@GCE sensors was investigated for the effective detection of 2-NA in real river water samples, revealing good recovery results.

Highly exfoliated functionalized MoS2 with sodium alginate-polydopamine conjugates for electrochemical sensing of cardio-selective ß-blocker by voltammetric methods.

Molybdenum disulfide (MoS2) surface functionalization was performed with a catechol-containing polymer sodium alginate (SA) and dopamine (DA) through simultaneous MoS2 exfoliation and self-polymerization of DA. The MoS2/SA-PDA nanocomposite was characterized using spectroscopic, microscopic, and electroanalytical techniques to evaluate its electrocatalytic performance. The electrocatalytic behavior of the MoS2/SA-PDA nanocomposite modified electrode for the detection of acebutolol (ACE), a cardio-selective ß-blocker drug was explored  through cyclic voltammetric and differential pulse voltammetric techniques. The influence of scan rate, concentration, and pH value on the oxidation peak current of ACE was investigated  to optimize the deducting condition. The electrochemical activity of the MoS2/SA-PDA nanocomposite electrode was attributed to the existence of reactive functional groups being contributed from SA, PDA, and MoS2 exhibiting a synergic effect. The MoS2/SA-PDA nanocomposite modified electrode exhibits admirable electrocatalytic activity with a wide linear response range (0.009 to 520 µM), low detection limit (5 nM), and high sensitivity (0.354 µA µM-1 cm-2) also in the presence of similar (potentially interfering) compounds. The fabricated MoS2/SA-PDA nanocomposite modified electrode can be useful for the detection of ACE in pharmaceutical analysis.

Highly sensitive broadband binary photoresponse in gateless epitaxial graphene on 4H-SiC.

Due to weak light-matter interaction, standard chemical vapor deposition (CVD)/exfoliated single-layer graphene-based photodetectors show low photoresponsivity (on the order of mA/W). However, epitaxial graphene (EG) offers a more viable approach for obtaining devices with good photoresponsivity. EG on 4H-SiC also hosts an interfacial buffer layer (IBL), which is the source of electron carriers applicable to quantum optoelectronic devices. We utilize these properties to demonstrate a gate-free, planar EG/4H-SiC-based device that enables us to observe the positive photoresponse for (405-532) nm and negative photoresponse for (632-980) nm laser excitation. The broadband binary photoresponse mainly originates from the energy band alignment of the IBL/EG interface and the highly sensitive work function of the EG. We find that the photoresponsivity of the device is > 10 A/W under 405 nm of power density 7.96 mW/cm2 at 1 V applied bias, which is three orders of magnitude greater than the obtained values of CVD/exfoliated graphene and higher than the required value for practical applications. These results path the way for selective light-triggered logic devices based on EG and can open a new window for broadband photodetection.

Polymeric Gelatin Scaffolds Affect Mesenchymal Stem Cell Differentiation and Its Diverse Applications in Tissue Engineering.

Studies using polymeric scaffolds for various biomedical applications, such as tissue engineering, implants and medical substitutes, and drug delivery systems, have attempted to identify suitable material for tissue regeneration. This study aimed to investigate the biocompatibility and effectiveness of a gelatin scaffold seeded with human adipose stem cells (hASCs), including physical characteristics, multilineage differentiation in vitro, and osteogenic potential, in a rat model of a calvarial bone defect and to optimize its design. This functionalized scaffold comprised gelatin-hASCs layers to improve their efficacy in various biomedical applications. The gelatin scaffold exhibited excellent biocompatibility in vitro after two weeks of implantation. Furthermore, the gelatin scaffold supported and specifically regulated the proliferation and osteogenic and chondrogenic differentiation of hASCs, respectively. After 12 weeks of implantation, upon treatment with the gelatin-hASCs scaffold, the calvarial bone harboring the critical defect regenerated better and displayed greater osteogenic potential without any damage to the surrounding tissues compared to the untreated bone defect. These findings suggest that the present gelatin scaffold is a good potential carrier for stem cells in various tissue engineering applications.

Development of a Nucleic Acid Lateral Flow Immunoassay for the Detection of Human Polyomavirus BK.

The BK virus (BKV) is an emerging pathogen in immunocompromised individuals and widespread in the human population. Polymerase chain reaction is a simple and highly sensitive method for detecting BKV, but it is time consuming and requires expensive instruments and expert judgment. The lateral flow assay, a rapid, low-cost, minimal-labor, and easy-to-use diagnostic method, was successfully applied for pathogen detection. In this study, we used oligonucleotide probes to develop a simple and rapid sandwich-type lateral flow immunoassay for detecting BKV DNA within 45 minutes. The detection limit for the synthetic single-stranded DNA was 5 nM. The specificity study showed no cross-reactivity with other polyomaviruses, such as JC virus and simian virus 40. For the Escherichia coli containing BKV plasmid cultured samples, the sensitivity was determined to be 107 copies/mL. The approach offers great potential for BKV detection of various target analytes in point-of-care settings.

Human Adipose-Derived Mesenchymal Stem Cells-Incorporated Silk Fibroin as a Potential Bio-Scaffold in Guiding Bone Regeneration.

Recently, stem cell-based bone tissue engineering (BTE) has been recognized as a preferable and clinically significant strategy for bone repair. In this study, a pure 3D silk fibroin (SF) scaffold was fabricated as a BTE material using a lyophilization method. We aimed to investigate the efficacy of the SF scaffold with and without seeded human adipose-derived mesenchymal stem cells (hASCs) in facilitating bone regeneration. The effectiveness of the SF-hASCs scaffold was evaluated based on physical characterization, biocompatibility, osteogenic differentiation in vitro, and bone regeneration in critical rat calvarial defects in vivo. The SF scaffold demonstrated superior biocompatibility and significantly promoted osteogenic differentiation of hASCs in vitro. At six and twelve weeks postimplantation, micro-CT showed no statistical difference in new bone formation amongst all groups. However, histological staining results revealed that the SF-hASCs scaffold exhibited a better bone extracellular matrix deposition in the defect regions compared to other groups. Immunohistochemical staining confirmed this result; expression of osteoblast-related genes (BMP-2, COL1a1, and OCN) with the SF-hASCs scaffold treatment was remarkably positive, indicating their ability to achieve effective bone remodeling. Thus, these findings demonstrate that SF can serve as a potential carrier for stem cells, to be used as an osteoconductive bioscaffold for BTE applications.

Wet-spinning-based Molding Process of Gelatin for Tissue Regeneration.

This article presents an inexpensive method to fabricate gelatin, as a natural polymer, into monofilament fibers or other appropriate forms. Through the wet spinning method, gelatin fibers are produced by smooth extrusion in a suitable coagulation medium. To increase the functional surface of these gelatin fibers and their ability to mimic the features of tissues, gelatin can be molded into a tube form by referring to this concept. Examined by in vitro and in vivo tests, the gelatin tubes demonstrate a great potential for application in tissue engineering. Acting as a suitable filling gap material, gelatin tubes can be used to substitute the tissue in the damaged area (e.g., in the nervous or cardiovascular system), as well as to promote regeneration by providing a direct replacement of stem cells and neural circuitry. This protocol provides a detailed procedure for creating a biomaterial based on a natural polymer, and its implementation is expected to greatly benefit the development of correlative natural polymers, which help to realize tissue regeneration strategies.

Evaluation of Chitosan Derivative Microparticles Encapsulating Superparamagnetic Iron Oxide and Doxorubicin as a pH-Sensitive Delivery Carrier in Hepatic Carcinoma Treatment: An in vitro Comparison Study.

We developed a novel, pH-sensitive drug delivery microparticle based on N-palmitoyl chitosan (NPCS) to transport the superparamagnetic iron oxide (SPIO) and anticancer drug doxorubicin (DOX). The characteristics of NPCS were characterized through nuclear magnetic resonance. Our results based on testing of volume swelling in multiple pH aqueous solutions revealed that the modified chitosan had a pH-sensitive property. The morphology and size of the DOX-SPIO/NPCS microparticles were investigated using transmission electron microscopy and scanning electron microscopy. The statistical result of microparticles had diameter of 185 ± 87 nm. Surface chemical moieties of DOX-SPIO/NPCS microparticles were confirmed using attenuated total reflection Fourier transform infrared spectroscopy and indicated the existence of mostly hydrophilic groups such as -OH, -C=O, and -C-O-C-. Transmission electron microscopy revealed the dark contrast of SPIO dots encapsulated in the NPCS matrix. Nuclear magnetic resonance T2-weighted magnetic resonance imaging confirmed that the produced DOX-SPIO/NPCS microparticles still exhibited T2 relaxation durations as short as 37.68 ± 8.69 ms (under administration of 2.5 µg/mL), which is comparable to the clinically required dosage. In the drug release profile, the DOX-SPIO/NPCS drug delivery microparticle was accelerated in an acidic environment (pH 6.5) compared with that in a basic environment. Microparticles in a cytotoxicity assay (3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide assay) revealed that DOX-SPIO/NPCS microparticles had better antitumor ability than did free-form of DOX. Additionally, microparticles loaded with 0.5-5 µg/mL DOX in an acidic environment (pH 6.5) demonstrated higher efficacy against Hep G2 cell growth, possibly because of the swelling effect of NPCS, resulting in volume expansion and easy drug release. Accordingly, these large DOX-SPIO/NPCS microparticles showed potential for application as a pH-sensitive drug delivery system and as chemoembolization particles for hepatic carcinoma therapy.

Correction to: Osteogenic prospective of deriving human dental stem cells in collagen matrix boost.

The original version of this article unfortunately contained a mistake. The country was incorrect in the authors affiliations. It should read as "ROC". The corrected affiliations are given below.

Positively charged gold nanoparticles capped with folate quaternary chitosan: Synthesis, cytotoxicity, and uptake by cancer cells.

In this study, we synthesized various quaternary chitosan derivatives and used them to stabilize gold nanoparticles (AuNPs). These chitosan derivatives comprised N-(2-hydroxy)propyl-3-trimethylammonium chitosan chloride (HTCC), folate-HTCC, galactosyl-HTCC, and their fluorescein isothiocyanate-conjugated derivatives. Various positively surface-charged AuNPs were prepared under alkaline conditions using glucose as a reducing agent in the presence of the HTCC derivatives (HTCCs). The effects of the concentration of NaOH, glucose, and HTCCs on the particles size, zeta potential, and stability were studied in detail. Cell cycle assays verify that none of the HTCCs or HTCCs-AuNPs was cytotoxic to human umbilical vein endothelial cells. Flow cytometry analysis showed that the folate HTCC-AuNPs were internalized in Caco-2, HepG2, and HeLa cancer cells to a significantly greater extent than AuNPs without folate. But, galactosyl HTCC-AuNPs only showed high cell uptake by HepG2 cells.

Silk-sericin degummed wastewater solution-derived and nitrogen enriched porous carbon nanosheets for robust biological imaging of stem cells.

Appreciated raw materials like silk-sericin can be recovered from silk-textile industrial waste for the production of novel functional nanomaterials. In this study, highly fluorescent sericin based carbon nanosheets (SCN) were produced from industrial wastewater containing silk-sericin as a precursor, and was applied as bio-imaging application for oral fat stem cells. A simple one-pot, hydrothermal carbonization method was used to produce SCN at a 180°C. The obtained hydrothermal carbons exhibited strong fluorescence properties due to the presence of strong polar groups, such as carboxyl, amino and amide groups in the surface. Heteroatom functionalization of the SCN leads to the property of fluorescence due to enriched nitrogen and was confirmed by X-ray photoelectron and Fourier transform infrared spectroscopy. The plate-like morphology of SCN about 35nm in size was evaluated by transmission electron microscopy. The carbon 13 nuclear magnetic resonance results revealed that nano-sized fluorescent SCN formed during carbonization and functionalization occurred through dehydration of the sericin protein. Moreover, the prepared SCNs demonstrated low toxicity and their suitability for bio-imaging applications was demonstrated to the oral fat stem cells. Overall, sericin degumming wastewater from the silk textile industry can be utilized for the production of SCNs for stem cells bio-imaging applications.

Osteogenic prospective of deriving human dental stem cells in collagen matrix boost.

Stem cells derived from oral tissue represent a highly attractive alternative source for clinical bone regeneration because they can be collected by non-invasive or minimally invasive procedures. Herein, we describe the human dental stem cells (DSCs) deriving from buccal fat pads (BFP), dental pulp (DP) of impacted teeth, and periodontal ligaments (PDL) to obtain BFPSCs, DPSCs, and PDLSCs, respectively. Cells were purified with selected medium and expanded through passages in stem cell culture medium. Purified cells were characterized for stemness by their growth rate, immunostaining, and multilineage differentiation ability. They showed plastic adherence, expression of stemness-specific markers, and multilineage differentiation potential. Immunocytochemistry analysis confirmed that DPSCs had more osteogenic potential than BFSCs and PDLSCs. Calcium-rich deposits, evaluated by von Kossa and Alizarin red staining, showed greater mineralization when DPSCs were cultured on collagen type I matrix than without collagen. Furthermore, DPSC-seeded collagen type I matrix maintained consistent osteogenesis and boosted mineral formation by 1-2 weeks over that in DPSCs cultured without collagen. Radiographic analysis of DPSC-seeded collagen type I matrix transplanted into rat cranial defects showed significant bone regeneration after 8 weeks. These results suggested that the redundant oral tissue can be used as a source of adult multipotent stem cells for clinical bone regeneration. Triple overlay images with biomarkers (red), nuclei (blue) and bright field morphology of DPSCs. The specifically osteo-differentiation shown by osteocalcin (left) expression and lack of sox9 (right) expressed in the images below which were cultured with collagen matrix, contrast with no collagen matrix group above.

Carvacrol Ameliorates Ligation-Induced Periodontitis in Rats.

BACKGROUND: This study aims to evaluate the ameliorative effect of carvacrol, an anti-inflammatory monoterpenoid phenol and a major component of Plectranthus amboinicus, on periodontal damage in an experimental rat model of periodontitis. METHODS: Forty Sprague-Dawley rats were divided into ligation (Lig), non-ligation (n-Lig), and two ligation plus carvacrol (Lig+C) groups. Carvacrol (17.5 or 35.0 mg/kg body weight/day) was administered intragastrically from 1 day before ligation. On day 8, dental alveolar bone loss and gingival inflammation in periodontal specimens were examined by dental radiography, microcomputed tomography, and histology. Expressions of tumor necrosis factor-α, interleukin (IL)-1ß, IL-6, and inducible nitric oxide synthase messenger (m)RNAs, and levels of matrix metalloproteinase (MMP)-2 and MMP-9 in gingiva were examined by reverse transcription-polymerase chain reaction and zymography. RESULTS: Dental radiography revealed periodontal bone-supporting ratios in Lig and Lig+C groups were lower than the n-Lig group, with Lig group ratios being lowest. Compared with the n-Lig group, the cemento-enamel junction-bone distance was significantly longer in Lig and Lig+C groups, with Lig+C groups showing shorter distances regardless of radiographic methods used. Histology and histometry showed less inflammatory area and stronger connective tissue attachment in Lig+C groups than in the Lig group. Cytokine/mediator mRNA expression and MMP-9 levels were reduced in the Lig+C groups. CONCLUSIONS: Carvacrol reduced tissue damage and bone loss caused by ligation-induced periodontitis. The present results indicate that carvacrol might reduce tissue destruction by downregulating expression of proinflammatory mediators and MMP-9.

Evaluating the effectiveness of a novel atomized liquid needle-free transdermal delivery system.

Needle-free jet injections constitute a crucial method for drug delivery. A novel liquid drug delivery system has been proposed recently, in which pressure atomizes liquid before delivering that atomized liquid to the patient's body; however, the mechanism and efficiency of the system are unclear. This study explored the shot delivery pressure, penetration depth, and cumulative amount of permeation of this system. This system was used to deliver 0.5% (w/v) methylene blue to agarose phantoms at various shot delivery pressures. Shots of methylene blue were also delivered to porcine skin samples at different shot delivery frequencies for light microscopy evaluation. A commercial microneedle array was used for comparing the effectiveness of the skin penetration depths. The array was gently stamped against porcine skin; methylene blue was subsequently applied to the area for different time points, followed by microscopic observations. In vitro skin penetration was tested using static Franz diffusion cells over 8 h. Finally, the feasibility of the system's clinical application was evaluated by analyzing the local analgesic effect in a heat nociceptive animal model. The penetration depths created using 100 shots at 100 psi were similar to those created using the commercial microneedle array for 2 h. Thermal stimulation responses showed that 15 min after diclofenac sodium was delivered by the system, heat nociception was significantly attenuated for 60 min. Our study presents a novel delivery system that may be useful for future clinical applications.

Epigallocatechin-3-gallate modulates arrhythmogenic activity and calcium homeostasis of left atrium.

BACKGROUND: Atrial fibrillation (AF) is the commonest sustained arrhythmia, and increases the risk of stroke, heart failure, and mortality. Calcium (Ca2+) overload and oxidative stress are thought to participate in the pathogenesis of AF. Epigallocatechin-3-gallate (EGCG) has an antioxidative effect and been shown to be beneficial in promoting cardiovascular health. However, it is not clear if EGCG directly modulates the electrophysiological characteristics and Ca2+ homeostasis of the left atrium (LA). METHODS AND RESULTS: Conventional microelectrodes, whole-cell patch-clamp, and Fluo-3 fluorometric ratio technique were performed using the isolated rabbit LA preparations or isolated single LA cardiomyocytes before and after EGCG treatment. EGCG (0.01, 0.1, 1, and 10µM) which concentration-dependently decreased the APD20 by 13±8%, 25±5%, 31±6%, and 37±5%, APD50 by 9±8%, 22±6%, 32±7%, and 40±4%, and APD90 by 2±12%, 9±8%, 24±10%, and 34±5% in LA preparations. EGCG (0.1µM) decreased the late sodium (Na+) current, L-type Ca2+ current, nickel-sensitive Na+-Ca2+ exchanger current, and transient outward current, but did not change the Na+ current and ultra-rapid delayed rectifier potassium current in LA cardiomyocytes. EGCG decreased intracellular Ca2+ transient and sarcoplasmic reticulum Ca2+ content in LA cardiomyocytes. Furthermore, EGCG decreased isoproterenol (ISO, 1µM)-induced burst firing. KT5823 (1µM) or KN93 (1µM) decreased the incidences of ISO-induced LA burst firing, which became lower with EGCG treatment. H89 (10µM) and KN92 (1µM) did not suppress the incidence of ISO-induced LA burst firing. However, EGCG decreased the incidences of ISO-induced LA burst firing in the presence of H89 or KN92. CONCLUSION: EGCG directly regulates LA electrophysiological characteristics and Ca2+ homeostasis, and suppresses ISO-induced atrial arrhythmogenesis through inhibiting Ca2+/calmodulin or cGMP-dependent protein kinases.

Development and application of micro-polysaccharide drug carriers incorporating doxorubicin and superparamagnetic iron oxide for bimodality treatment of hepatocellular carcinoma.

In this study, we demonstrated a novel polyelectrolyte microparticle, doxorubicin(DOX)-superparamagnetic iron oxide (SPIO)-chondroitin sulfate (CS)/chitosan (CHI)microparticles (MPs), as a drug delivery system for hepatic cancer treatment. We also investigated the properties of these microparticles through composition determination, formulation tests, in vitro study, and in vivo study. The results showed that our DOX-SPIO-CS/CHI MPs had an average diameter of 1.43±0.54µm and exhibited a spherical shape. The encapsulation efficiency of this drug carrier was approximately 31±8.07%, according to our spectroscopic determination. The results of release profile test revealed the sustained-release behavior of DOX-SPIO-CS/CHI MPs, which released 51.5% of DOX within 48h of the testing period. According to the results of a cell viability assay and an animal study, the DOX-SPIO-CS/CHI MPs exhibited stronger cytotoxicity than did free DOX when it was administered to Hep G2 and Huh-6 human liver cancer cell lines in vitro and to nude mice of Hep G2/Huh-6-bearing mice model in vivo.

Effects of Acetaminophen on Left Atrial Contractility.

BACKGROUND: It has been observed that acetaminophen shows cardioprotective efficacy in mammals. In this study, we investigated the electromechanical effects of acetaminophen on the left atrium (LA). METHODS: Conventional microelectrodes were used to record the action potentials (AP) in rabbit LA preparations. The action potential duration (APD) at repolarization levels of 90%, 50% and 20% of the AP amplitude (APD90, APD50, and APD20, respectively), resting membrane potential, and contractile force were measured during 2 Hz electrical stimulation before and after sequential acetaminophen administration to the LA. RESULTS: Acetaminophen (0.1, 0.3, 1, and 3 mM) reduced APD20 from 9.4 ± 1.2 to 8.0 ± 1.1 (p < 0.05), 7.1 ± 0.8 (p < 0.05), 7.8 ± 1.1, and 6.8 ± 1.2 ms (p < 0.05), respectively, and APD50 from 20.2 ± 1.9 to 17.4 ± 2.0, 15.6 ± 1.8 (p < 0.05), 15.8 ± 2.2 (p < 0.05), and 14.1 ± 2.4 ms (p < 0.05), respectively, in a concentration-dependent manner. APD90 was reduced from 72.0 ± 3.6 to 64.7 ± 4.2, 61.9 ± 4.3, 60.5 ± 3.7, and 53.4 ± 4.4 ms (p < 0.05), respectively. Acetaminophen increased LA contractility from 45 ± 9 to 52 ± 10 (p < 0.05), 55 ± 9 (p < 0.01), 58 ± 9 (p < 0.01), and 60 ± 9 mg (p < 0.01), respectively, in a concentration-dependent manner. In the presence of the NOS inhibitor L-NAME or PKG-I inhibitor DT-2, additional acetaminophen treatment did not significantly increase LA contractility. CONCLUSIONS: Acetaminophen modulated the electromechanical characteristics of LA by inhibiting the NOS and PKG I pathway, and then contributed to the positive inotropic effect.