Self-Charging Power System Empowered by Bismuth Halide Perovskite-Based Hybrid Nanogenerator and Lithium-ion Battery.

Halide perovskite, renowned for its multifunctional properties, shows considerable promise for realizing self-charging power systems. In this study, a lead-free methylammonium bismuth iodide (MA3Bi2I9) perovskite is used to create a self-charging power unit (SPU). This involves constructing a hybrid piezoelectric-triboelectric nanogenerator (Hybrid-TENG) and utilizing MA3Bi2I9 for energy storage as an anode in a lithium-ion battery (LIB). Initially, MA3Bi2I9 nanorods are synthesized and composited with a polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene polymer. The dielectric and mechanical properties of composite films having perovskite loading content are investigated. The optimized Hybrid-TENG exhibits superior performance, generating a voltage of 537 V, current density of 13.2 µA cm- 2, and maximum power density of 3.04 mW cm-2, which can be attributed to the high piezoelectric coefficient of MA3Bi2I9 nanorods (≈20.6 pm V-1). A MA3Bi2I9 thin film, serving as an electrode in LIB, demonstrates a high specific capacity of 2378.9 mAh cm-3 (578.8 mAh g-1) with a capacity retention of ≈87.5% over 100 cycles, underscoring its stable performance. Furthermore, a Hybrid-TENG is employed to charge the MA3Bi2I9-based LIB, thus realizing an SPU for driving portable electronics. This study highlights the promising potential of perovskites for developing efficient nanogenerators and LIBs, paving the way for sustainable energy solutions in small-scale electronics.

Compositionally Sequenced Interfacial Layers for High-Energy Li-Metal Batteries.

Electrolyte additives with multiple functions enable the interfacial engineering of Li-metal batteries (LMBs). Owing to their unique reduction behavior, additives exhibit a high potential for electrode surface modification that increases the reversibility of Li-metal anodes by enabling the development of a hierarchical solid electrolyte interphase (SEI). This study confirms that an adequately designed SEI facilitates the homogeneous supply of Li+, nonlocalized Li deposition, and low electrolyte degradation in LMBs while enduring the volume fluctuation of Li-metal anodes on cycling. An in-depth analysis of interfacial engineering mechanisms reveals that multilayered SEI structures comprising mechanically robust LiF-rich species, electron-rich P-O species, and elastic polymeric species enabled the stable charge and discharge of LMBs. The polymeric outer SEI layer in the as-fabricated multilayered SEI could accommodate the volume fluctuation of Li-metal anodes, significantly enhancing the cycling stability Li||LiNi0.8Co0.1Mn0.1O2 full cells with an electrolyte amount of 3.6 g Ah-1 and an areal capacity of 3.2 mAh cm-2. Therefore, this study confirms the ability of interfacial layers formed by electrolyte additives and fluorinated solvents to advance the performance of LMBs and can open new frontiers in the fabrication of high-performance LMBs through electrolyte-formulation engineering.

Piezoelectrically and Topographically Engineered Scaffolds for Accelerating Bone Regeneration.

Bone regeneration remains a critical concern across diverse medical disciplines, because it is a complex process that requires a combinatorial approach involving the integration of mechanical, electrical, and biological stimuli to emulate the native cellular microenvironment. In this context, piezoelectric scaffolds have attracted considerable interest owing to their remarkable ability to generate electric fields in response to dynamic forces. Nonetheless, the application of such scaffolds in bone tissue engineering has been limited by the lack of a scaffold that can simultaneously provide both the intricate electromechanical environment and the biocompatibility of the native bone tissue. Here, we present a pioneering biomimetic scaffold that combines the unique properties of piezoelectric and topographical enhancement with the inherent osteogenic abilities of hydroxyapatite (HAp). Notably, the novelty of this work lies in the incorporation of HAp into polyvinylidene fluoride-co-trifluoro ethylene in a freestanding form, leveraging its natural osteogenic potential within a piezoelectric framework. Through comprehensive in vitro and in vivo investigations, we demonstrate the remarkable potential of these scaffolds to accelerate bone regeneration. Moreover, we demonstrate and propose three pivotal mechanisms─(i) electrical, (ii) topographical, and (iii) paracrine─that collectively contribute to the facilitated bone healing process. Our findings present a synergistically derived biomimetic scaffold design with wide-ranging prospects for bone regeneration as well as various regenerative medicine applications.

Switchable tribology of ferroelectrics.

Switchable tribological properties of ferroelectrics offer an alternative route to visualize and control ferroelectric domains. Here, we observe the switchable friction and wear behavior of ferroelectrics using a nanoscale scanning probe-down domains have lower friction coefficients and show slower wear rates than up domains and can be used as smart masks. This asymmetry is enabled by flexoelectrically coupled polarization in the up and down domains under a sufficiently high contact force. Moreover, we determine that this polarization-sensitive tribological asymmetry is widely applicable across various ferroelectrics with different chemical compositions and crystalline symmetry. Finally, using this switchable tribology and multi-pass patterning with a domain-based dynamic smart mask, we demonstrate three-dimensional nanostructuring exploiting the asymmetric wear rates of up and down domains, which can, furthermore, be scaled up to technologically relevant (mm-cm) size. These findings demonstrate that ferroelectrics are electrically tunable tribological materials at the nanoscale for versatile applications.

Scalable Solution Phase Synthesis of 2D Siloxene via a Two-Step Interlayer Expansion Process.

Two-dimensional (2D) siloxene is attracting considerable research interest recently principally owing to its inherent compatibility with silicon-based semiconductor technology. -The synthesis of siloxene has been mostly limited to multilayered structures using traditional topochemical reaction procedures. Herein, we report high-yield synthesis of single to few-layer siloxene nanosheets by developing a two-step interlayer expansion and subsequent liquid phase exfoliation procedure. Our protocol enables high-yield production of few-layer siloxene nanosheets with a lateral dimension of up to 4 µm and thickness ranging from 0.8 to 4.8 nm, corresponding to single to a few layers, well stabilized in water. The atomically flat nature of exfoliated siloxene can be exploited for the construction of 2D/2D heterostructure membranes via typical solution processing. We demonstrate highly ordered graphene/siloxene heterostructure films with synergistic mechanical and electrical properties, which deliver noticeably high device capacitance when assembled into a coin cell symmetric supercapacitor device structures. Additionally, we demonstrate that the mechanically flexible exfoliated siloxene-graphene heterostructure enables its direct use in flexible and wearable supercapacitor applications.

Correlating Nanoscale Structures with Electrochemical Properties of Solid Electrolyte Interphases in Solid-State Battery Electrodes.

Here, we investigate the nonlinear relationship between the content of solid electrolytes in composite electrodes and the irreversible capacity via the degree of nanoscale uniformity of the surface morphology and chemical composition of the solid electrolyte interphase (SEI) layer. Using electrochemical strain microscopy (ESM) and X-ray photoelectron spectroscopy (XPS), changes of the chemical composition and morphology (Li and F distribution) in SEI layers on the electrodes as a function of solid electrolyte contents are analyzed. As a result, we find that the solid electrolyte content affects the variation of the SEI layer thickness and chemical distributions of Li and F ions in the SEI layer, which, in turn, influence the Coulombic efficiency. This correlation determines the composition of the composite electrode surface that can maximize the physical and chemical uniformity of the solid electrolyte on the electrode, which is a key parameter to increase electrochemical performance in solid-state batteries.

PEg TRAnsfer Workflow recognition challenge report: Do multimodal data improve recognition?

BACKGROUND AND OBJECTIVE: In order to be context-aware, computer-assisted surgical systems require accurate, real-time automatic surgical workflow recognition. In the past several years, surgical video has been the most commonly-used modality for surgical workflow recognition. But with the democratization of robot-assisted surgery, new modalities, such as kinematics, are now accessible. Some previous methods use these new modalities as input for their models, but their added value has rarely been studied. This paper presents the design and results of the "PEg TRAnsfer Workflow recognition" (PETRAW) challenge with the objective of developing surgical workflow recognition methods based on one or more modalities and studying their added value. METHODS: The PETRAW challenge included a data set of 150 peg transfer sequences performed on a virtual simulator. This data set included videos, kinematic data, semantic segmentation data, and annotations, which described the workflow at three levels of granularity: phase, step, and activity. Five tasks were proposed to the participants: three were related to the recognition at all granularities simultaneously using a single modality, and two addressed the recognition using multiple modalities. The mean application-dependent balanced accuracy (AD-Accuracy) was used as an evaluation metric to take into account class balance and is more clinically relevant than a frame-by-frame score. RESULTS: Seven teams participated in at least one task with four participating in every task. The best results were obtained by combining video and kinematic data (AD-Accuracy of between 93% and 90% for the four teams that participated in all tasks). CONCLUSION: The improvement of surgical workflow recognition methods using multiple modalities compared with unimodal methods was significant for all teams. However, the longer execution time required for video/kinematic-based methods(compared to only kinematic-based methods) must be considered. Indeed, one must ask if it is wise to increase computing time by 2000 to 20,000% only to increase accuracy by 3%. The PETRAW data set is publicly available at www.synapse.org/PETRAW to encourage further research in surgical workflow recognition.

Boosted Heterogeneous Catalysis by Surface-Accumulated Excess Electrons of Non-Oxidized Bare Copper Nanoparticles on Electride Support.

Engineering active sites of metal nanoparticle-based heterogeneous catalysts is one of the most prerequisite approaches for the efficient production of chemicals, but the limited active sites and undesired oxidation on the metal nanoparticles still remain as key challenges. Here, it is reported that the negatively charged surface of copper nanoparticles on the 2D [Ca2 N]+ ∙e- electride provides the unrestricted active sites for catalytic selective sulfenylation of indoles and azaindoles with diaryl disulfides. Substantial electron transfer from the electride support to copper nanoparticles via electronic metal-support interactions results in the accumulation of excess electrons at the surface of copper nanoparticles. Moreover, the surface-accumulated excess electrons prohibit the oxidation of copper nanoparticle, thereby maintaining the metallic surface in a negatively charged state and activating both (aza)indoles and disulfides under mild conditions in the absence of any further additives. This study defines the role of excess electrons on the nanoparticle-based heterogeneous catalyst that can be rationalized in versatile systems.

Nanoscale Visualization of the Electron Conduction Channel in the SiO/Graphite Composite Anode.

Conductive atomic force microscopy (C-AFM) is widely used to determine the electronic conductivity of a sample surface with nanoscale spatial resolution. However, the origin of possible artifacts has not been widely researched, hindering the accurate and reliable interpretation of C-AFM imaging results. Herein, artifact-free C-AFM is used to observe the electron conduction channels in Si-based composite anodes. The origin of a typical C-AFM artifact induced by surface morphology is investigated using a relevant statistical method that enables visualization of the contribution of artifacts in each C-AFM image. The artifact is suppressed by polishing the sample surface using a cooling cross-section polisher, which is confirmed by Pearson correlation analysis. The artifact-free C-AFM image was used to compare the current signals (before and after cycling) from two different composite anodes comprising single-walled carbon nanotubes (SWCNTs) and carbon black as conductive additives. The relationship between the electrical degradation and morphological evolution of the active materials depending on the conductive additive is discussed to explain the improved electrical and electrochemical properties of the electrode containing SWCNTs.

Non-oxidized bare copper nanoparticles with surface excess electrons in air.

Copper (Cu) nanoparticles (NPs) have received extensive interest owing to their advantageous properties compared with their bulk counterparts. Although the natural oxidation of Cu NPs can be alleviated by passivating the surfaces with additional moieties, obtaining non-oxidized bare Cu NPs in air remains challenging. Here we report that bare Cu NPs with surface excess electrons retain their non-oxidized state over several months in ambient air. Cu NPs grown on an electride support with excellent electron transfer ability are encapsulated by the surface-accumulated excess electrons, exhibiting an ultralow work function of ~3.2 eV. Atomic-scale structural and chemical analyses confirm the absence of Cu oxide moiety at the outermost surface of air-exposed bare Cu NPs. Theoretical energetics clarify that the surface-accumulated excess electrons suppress the oxygen adsorption and consequently prohibit the infiltration of oxygen into the Cu lattice, provoking the endothermic reaction for oxidation process. Our results will further stimulate the practical use of metal NPs in versatile applications.

Large-Area Uniform 1-nm-Level Amorphous Carbon Layers from 3D Conformal Polymer Brushes. A "Next-Generation" Cu Diffusion Barrier?

A reliable method for preparing a conformal amorphous carbon (a-C) layer with a thickness of 1-nm-level, is tested as a possible Cu diffusion barrier layer for next-generation ultrahigh-density semiconductor device miniaturization. A polystyrene brush of uniform thickness is grafted onto 4-inch SiO2 /Si wafer substrates with "self-limiting" chemistry favoring such a uniform layer. UV crosslinking and subsequent carbonization transforms this polymer film into an ultrathin a-C layer without pinholes or hillocks. The uniform coating of nonplanar regions or surfaces is also possible. The Cu diffusion "blocking ability" is evaluated by time-dependent dielectric breakdown (TDDB) tests using a metal-oxide-semiconductor (MOS) capacitor structure. A 0.82 nm-thick a-C barrier gives TDDB lifetimes 3.3× longer than that obtained using the conventional 1.0 nm-thick TaNx diffusion barrier. In addition, this exceptionally uniform ultrathin polymer and a-C film layers hold promise for selective ion permeable membranes, electrically and thermally insulating films in electronics, slits of angstrom-scale thickness, and, when appropriately functionalized, as a robust ultrathin coating with many other potential applications.

Telomere length in dromedary camels (Camelus dromedarius) produced by somatic cell nuclear transfer (SCNT) and their age-matched naturally produced counterparts.

There are controversial reports on the restoration of eroded telomere length in offspring produced by somatic cell nuclear transfer (SCNT) in different animal species. To the best of our knowledge, no earlier studies report the telomere length in naturally produced or cloned animals in any of the camelid species. Therefore, the present study was conducted to estimate the telomere length in dromedary camels produced by SCNT, the donor cells, and their age-matched naturally produced counterparts by Terminal Restriction Fragment (TRF) length analysis and real-time Q PCR T/S ratio methods. Genomic DNA was extracted from venous blood collected from 6 cloned animals and their age-matched counterparts. Using the southern blot technique, digested DNA was blotted onto a positively charged nylon membrane, and its hybridization was carried out using telomere (TTAGGG)n specific, DIG-labeled hybridization probe (Roche Diagnostics, Germany) at 42 °C for 4 h. Stringent washes were carried out at the same temperature, followed by a chemiluminescence reaction. The signals were captured using the Azure Biosystems C600 gel documentation system. A TeloTool program from MATLAB software with a built-in probe intensity correction algorithm was used for TRF analysis. The experiment was replicated three times, and the data, presented as mean ± SEM, were analyzed using a two-sample t-test (MINITAB statistical software, Minitab ltd, CV3 2 TE, UK). No difference was found in the mean telomere length of cloned camels when compared to their naturally produced age-matched counterparts. However, the telomere length was more (P < 0.05) than that of the somatic cells used for producing the SCNT embryos. A moderate positive Pearson correlation coefficient (r = 0.6446) was observed between the telomere lengths estimated by TRF and Q PCR T/S ratio method. In conclusion, this is the first study wherein we are reporting telomere length in naturally produced and cloned dromedary camels produced by somatic cell nuclear transfer. We found that telomere lengths in cloned camels were similar to their age-matched naturally produced counterparts, suggesting that the camel cytoplast reprograms the somatic cell nucleus and restores the telomere length to its totipotency stage.

Reducing Time to Discovery: Materials and Molecular Modeling, Imaging, Informatics, and Integration.

Multiscale and multimodal imaging of material structures and properties provides solid ground on which materials theory and design can flourish. Recently, KAIST announced 10 flagship research fields, which include KAIST Materials Revolution: Materials and Molecular Modeling, Imaging, Informatics and Integration (M3I3). The M3I3 initiative aims to reduce the time for the discovery, design and development of materials based on elucidating multiscale processing-structure-property relationship and materials hierarchy, which are to be quantified and understood through a combination of machine learning and scientific insights. In this review, we begin by introducing recent progress on related initiatives around the globe, such as the Materials Genome Initiative (U.S.), Materials Informatics (U.S.), the Materials Project (U.S.), the Open Quantum Materials Database (U.S.), Materials Research by Information Integration Initiative (Japan), Novel Materials Discovery (E.U.), the NOMAD repository (E.U.), Materials Scientific Data Sharing Network (China), Vom Materials Zur Innovation (Germany), and Creative Materials Discovery (Korea), and discuss the role of multiscale materials and molecular imaging combined with machine learning in realizing the vision of M3I3. Specifically, microscopies using photons, electrons, and physical probes will be revisited with a focus on the multiscale structural hierarchy, as well as structure-property relationships. Additionally, data mining from the literature combined with machine learning will be shown to be more efficient in finding the future direction of materials structures with improved properties than the classical approach. Examples of materials for applications in energy and information will be reviewed and discussed. A case study on the development of a Ni-Co-Mn cathode materials illustrates M3I3's approach to creating libraries of multiscale structure-property-processing relationships. We end with a future outlook toward recent developments in the field of M3I3.

Testing the causal mechanism of the peninsular effect in passerine birds from South Korea.

The peninsular effect is a geographical phenomenon that explains patterns of species richness. Given that spatial variation in species richness along a peninsular may be driven by multiple processes, we aimed to identify the sources of latitudinal patterns in passerine species richness and test hypotheses regarding (1) recent deterministic processes (climate, primary productivity, forest area, and habitat diversity), (2) anthropogenic processes (habitat fragmentation), and (3) stochastic processes (migration influence) in the Korean peninsula. We used the distribution data of 147 passerine species from 2006 to 2012. Single regression between passerine species richness and latitude supported the existence of the peninsular effect. Mean temperature increased with decreasing latitude, as did habitat diversity but leaf area index and forest area decline. However, mean temperature and forest area only influenced passerine species richness. Although habitat diversity influenced passerine species richness, it was counter to the expectations associated with peninsular effect. The number of habitat patches decreased as latitude increased but it had no effect on passerine species richness. Ratio of migrant species richness showed no significant relationship with leaf area index, forest area, and habitat diversity. However, the ratio of migrant species richness increased with decreasing mean temperature and that contributed to the increase in passerine species. Overall, our finding indicate that the observed species richness pattern in peninsulas with the tip pointing south (in the northern hemisphere) counter to the global latitudinal gradient. These results were caused by the peninsular effect associated with complex mechanism that interact with climate, habitat area, and migrant species inflow.

Pseudo wastewater treatment by combining adsorption and phytoaccumulation on the Acrostichum aureum Linn. plant/activated carbon system.

In this study, the pseudo wastewater containing Zn, Fe, Cu ions was clean-up by a combination of physical adsorption onto activated carbon medium and phytoaccumulation using Acrostichum aureum Linn. plants. The adsorption capability of the activated carbon for the Fe, Cu, and Zn ions was 3.05, 3.72, and 2.85 mg·g - 1, respectively, at the saturation. The phytoaccumulation performance was proved by analyzing the individual residual ash collected after pyrolysis up to 1000 °C of the leaf, stem, and root of the plants. Thermal analyses of thermogravimetry data showed that the weight of the residual ash of the phytoremediated leaf, stem, and root of the plants was 37.0, 19.0, and 65.7 wt.%, respectively. Energy-dispersive X - ray spectroscopy determined the amount of Fe element in the residual ash of phytoremediated root is 7.05 wt.%, while that of the initial root is 1.18 wt.%. Conclusively, it can be proved that combining physical and biological processes is feasible to treat wastewater containing metal ions.

Light-Driven Piezo- and Triboelectricity in Organic-Inorganic Metal Trihalide Perovskite toward Mechanical Energy Harvesting and Self-powered Sensor Application.

A single-structured multifunctional device capable of energy harvesting and sensing multiple physical signals has significant potential for a wide range of applications in the Internet of Things (IoT). In this study, the fabricated single-structured device based on methylammonium lead iodide-polyvinylidene fluoride (MAPbI3-PVDF) composite can harvest mechanical energy and simultaneously operate as a self-powered light and pressure sensor because of the combined photoelectric and piezoelectric/triboelectric properties of the MAPbI3-PVDF composite. Light-dependent dielectric and piezoelectric properties of composite films are thoroughly investigated. Light and contact electrification effect on device performance in both piezoelectric and triboelectric modes is also systematically investigated. When the device is operated as a harvester in both piezoelectric and triboelectric modes, remarkable light-driven outputs were observed under illumination; the outputs decreased in the piezoelectric mode, while they increased in the triboelectric mode. Such light-controlled properties enabled the device to operate as a self-powered photodetector with outstanding responsivity (∼129.2 V/mW), rapid response time (∼50 ms), and satisfactory detectivity (∼1.4 × 1010 Jones) in the piezoelectric mode. The same device could also operate as a pressure sensor that exhibited excellent pressure sensitivity values of 0.107 and 0.194 V/kPa in the piezoelectric and triboelectric modes, respectively. In addition, the device exhibits a fast response time with long-term on-off switching properties, excellent mechanical durability, and long-term stability.

Nanoscale effects of beverages on enamel surface of human teeth: An atomic force microscopy study.

Dental erosion has become a prevalence disease and attracted increasing attention worldwide. In this research, we quantitatively evaluate the mechanical and morphological changes in the very early stages of softening and weakening of human enamel surfaces induced by soft drinks using atomic force microscopy (AFM). With an increase of the immersion time in soft drinks, we found a significant increase of surface roughness (Rq) of the enamel surface. The prismatic structure of enamel was clearly observed after a 1-h immersion in Coca-Cola®, which shows its strong erosion effect. According to the elastic modulus mapping images obtained by AFM, a considerable decrease of elastic modulus (E) of enamel surface has been found as the enamel surface structures are etched away by soft drinks. A high surface roughness of enamel will result in a high chance of cavities due to easier bacterial adhesion on rougher surface, while a drastic deterioration of the mechanical properties of the enamel will weaken its protection property. Our findings show the serious influence of acidic drinks on enamel surface at the very beginning stage of etching process, which is quite meaningful for people to prevent dental erosion and keep dental health.

Development of prepubertal goat oocytes after their in vitro maturation and chemical activation.

Experiments were conducted to study in vitro maturation of prepubertal goat oocytes and their developmental potential after chemical activation. In Experiment 1, cumulus-oocytes complexes collected from the ovaries of prepubertal goats slaughtered at a local abattoir were matured in vitro in TCM-199-based medium supplemented with 10 µg/ml luteinizing hormone (LH) (treatment 1) or 10 µg/ml LH + 0.1 mM l-cysteine (treatment 2). In Experiment 2, mature oocytes were activated with either 5 µM ionomycin or 7% ethanol. After 18 h, some oocytes were randomly fixed and stained to evaluate their chromatin status, while others were cultured in embryo culture medium to study their further development. In Experiment 3, oocytes activated with 5 µM ionomycin were cultured for 7 days in one of the four different culture media [Charles Rosenkrans medium (CR-1), TCM-199, potassium simplex optimization medium (KSOM) and synthetic oviductal fluid (SOF)] to study their developmental potential. The maturation rate in control, treatment 1, and treatment 2 media did not differ from each other (P > 0.05). However, the lowest degeneration of oocytes was observed in treatment 3 (P < 0.05) when compared with the other two groups. The proportion of activated oocytes was higher, while non-activated oocytes were lower in ionomycin group when compared with the group activated with ethanol (P < 0.05). The proportions of oocytes cleaved were 65.7, 56.8, 61.0 and 54.4% in CR-1, TCM-199, KSOM and SOF medium, respectively, with no significant difference. However, further development of cleaved oocytes was better in KSOM followed by SOF.

Thermally assisted nanotransfer printing with sub-20-nm resolution and 8-inch wafer scalability.

Nanotransfer printing (nTP) has attracted considerable attention due to its good pattern resolution, process simplicity, and cost-effectiveness. However, the development of a large-area nTP process has been hampered by critical reliability issues related to the uniform replication and regular transfer printing of functional nanomaterials. Here, we present a very practical thermally assisted nanotransfer printing (T-nTP) process that can easily produce well-ordered nanostructures on an 8-inch wafer via the use of a heat-rolling press system that provides both uniform pressure and heat. We also demonstrate various complex pattern geometries, such as wave, square, nut, zigzag, and elliptical nanostructures, on diverse substrates via T-nTP. Furthermore, we demonstrate how to obtain a high-density crossbar metal-insulator-metal memristive array using a combined method of T-nTP and directed self-assembly. We expect that the state-of-the-art T-nTP process presented here combined with other emerging patterning techniques will be especially useful for the large-area nanofabrication of various devices.

Tunable in-plane thermal conductivity of a single PEDOT:PSS nanotube.

Understanding the mechanism of thermal energy transport in a single nanotube (NT) is essential for successfully engineering nanostructured conducting polymers to apply to thermoelectrics or flexible electronic devices. We report the characterization of the in-plane thermal energy transport in a single poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) NT via direct measurement of the in-plane thermal conductivity (κ). We also demonstrate that the in-plane κ of PEDOT:PSS NT can be tuned within the range of 0.19 to 1.92 W·m-1·K-1 merely by changing the solvent used to treat the NTs in the post-fabrication stage. The in-plane thermal energy transport in a pristine NT, with its low in-plane κ, is primarily due to phonons; in a sulfuric acid-treated NT however, significant electronic contributions lead to a high in-plane κ. The present study will contribute to understanding the mechanism of thermal energy transport in highly disordered structures, such as conducting polymers, and to designing highly efficient polymer-based devices in which in-plane κ plays a pivotal role in determining the energy conversion efficiency.