The Influence of Erbium Laser Pretreatment on Dentin Shear Bond Strength and Bond Failure Modes: A Systematic Review and Network Meta-Analysis.

PURPOSE: To systematically review in-vitro studies that evaluated the influence of erbium laser pretreatment on dentin shear bond strength (SBS) and bond failure modes. MATERIALS AND METHODS: Electronic databases (PubMed, Cochrane Central, Embase, and Web of Science) were searched. Only in-vitro studies involving erbium laser irradiation of the dentin surface and SBS testing of the bonded resin block were included. The three common modes of bond failure (1. adhesive, 2. cohesive, and 3. mixed) were observed and analyzed. The network meta-analysis (NMA) was performed by Stata 15.0 software, the risk of bias was evaluated, and the certainty of the evidence was assessed by the Confidence in Network Meta-analysis (CINeMA). RESULTS: Forty studies with nine pretreatments (1. blank group: BL; 2. phosphoric acid etch-and-rinse: ER; 3. self-etch adhesive: SE; 4. Er:YAG laser: EL; 5. Er,Cr:YSGG laser: ECL; 6. ER+EL; 7. ER+ECL; 8. SE+EL; 9. SE+ECL) were included in this analysis. The NMA of SBS showed that ER+EL [SMD = 0.32, 95% CI (0.11, 0.98)] had the highest SBS next to ER, especially when using one of the 3M ESPE adhesives, followed by EL, ECL, SE and SE+EL. The Ivoclar Vivadent adhesives significantly increased the SBS of the ECL [SMD = 0.37, 95% CI (0.16,0.90)] and was higher than ER+EL [SMD = 0.25,95% CI (0.07,0.85)]. Finally, the surface under the cumulative ranking curve (SUCRA) value indicated that ER+EL (SUCRA = 71.0%) and EL (SUCRA = 62.9%) were the best treatments for enhancing dentin SBS besides ER. ER+EL (SUCRA = 85.3%), ER (SUCRA = 83.7%) and ER (SUCRA = 84.3%) had the highest probability of occurring in adhesive, cohesive and mixed failure modes, respectively. CONCLUSION: Er:YAG and Er,Cr:YSGG lasers improved dentin SBS compared to the blank group, especially when the acid etch-and-rinse pretreatment was combined with Er:YAG laser. Shear bond strength and failure mode do not appear to be directly related.

The role of oxidative stress biomarkers in the development of peri-implant disease: A systematic review and meta-analysis.

OBJECTIVES: To analyze the role of oxidative stress (OS) biomarkers in peri­implant diseases using a systematic review and meta-analysis approach. DATE: The review incorporated cross-sectional studies, randomized controlled trials, and case-control trials to evaluate the differences in OS biomarkers of peri­implant disease. SOURCES: A comprehensive literature search was conducted in electronic databases such as PubMed, Scopus, Embase, Web of Science, and CNKI, and no restrictions were applied during the search process. STUDY SELECTION: A total of 452 studies were identified, of which 18 were eligible for inclusion. Risk of bias and sensitivity analysis were assessed using Egger's test and funnel plots. RESULTS: We found that the levels of glutathione peroxidase (GSH-Px) in the peri­implant sulcus fluid (PISF) of patients with peri­implant diseases were significantly reduced (SMD = -1.40; 95 % CI = 1.70, -1.11; p < 0.001), while the levels of total myeloperoxidase (MPO) and malondialdehyde (MDA) were significantly increased (SMD = 0.46; 95 % CI = 0.12, 0.80; p = 0.008; SMD = 0.28; 95 % CI = 0.01, 0.56; p = 0.043). However, there were no significant differences of MPO concentration (SMD = 0.38; 95 % CI = -0.39, 1.15; p = 0.331) and superoxide dismutase (SOD)(SMD = -0.43; 95 % CI = -1.94, 1.07; p = 0.572) in PISF between peri­implant disease group and control group. Similarly, salivary MPO did not show significant differences (SMD = 1.62; 95 % CI = -1.01, 4.24; p = 0.227). CONCLUSIONS: Our results supported that the level of local OS biomarkers was closely related to peri­implant diseases. GSH-Px, total MPO and MDA may be PISF biomarkers with good capability to monitor the development of peri­implant disease. CLINICAL SIGNIFICANCE: This study found significant differences in the levels of local OS biomarkers (GSH-Px, total MPO, and MDA) between patients with peri­implant diseases and healthy subjects, which may be ideal candidate biomarkers for predicting and diagnosing peri­implant diseases.

Biodegradable Zn-5Dy Alloy with Enhanced Osteo/Angio-Genic Activity and Osteointegration Effect via Regulation of SIRT4-Dependent Mitochondrial Function.

Zinc (Zn)-dysprosium (Dy) binary alloys are promising biodegradable bone fracture fixation implants owing to their attractive biodegradability and mechanical properties. However, their clinical application is a challenge for bone fracture healing, due to the lack of Zn-Dy alloys with tailored proper bio-mechanical and osteointegration properties for bone regeneration. A Zn-5Dy alloy with high strength and ductility and a degradation rate aligned with the bone remodeling cycle is developed. Here, mechanical stability is further confirmed, proving that Zn-5Dy alloy can resist aging in the degradation process, thus meeting the mechanical requirements of fracture fixation. In vitro cellular experiments reveal that the Zn-5Dy alloy enhances osteogenesis and angiogenesis by elevating SIRT4-mediated mitochondrial function. In vivo Micro-CT, SEM-EDS, and immunohistochemistry analyses further indicate good biosafety, suitable biodegradation rate, and great osteointegration of Zn-5Dy alloy during bone healing, which also depends on the upregulation of SIRT4-mediated mitochondrial events. Overall, the study is the first to report a Zn-5Dy alloy that exerts remarkable osteointegration properties and has a strong potential to promote bone healing. Furthermore, the results highlight the importance of mitochondrial modulation and shall guide the future development of mitochondria-targeting materials in enhancing bone fracture healing.

The effect of periapical bone defects on stress distribution in teeth with periapical periodontitis: a finite element analysis.

BACKGROUND: Apical periodontitis directly affects the stress state of the affected tooth owing to the destruction of the periapical bone. Understanding the mechanical of periapical bone defects/tooth is clinically meaningful. In this study, we evaluate the effect of periapical bone defects on the stress distribution in teeth with periapical periodontitis using finite element analysis. METHODS: Finite element models of normal mandibular second premolars and those with periapical bone defects (spherical defects with diameters of 5, 10, 15, and 20 mm) were created using a digital model design software. The edges of the mandible were fixed and the masticatory cycle was simplified as oblique loading (a 400 N force loaded obliquely at 45° to the long axis of the tooth body) to simulate the tooth stress state in occlusion and analyze the von Mises stress distribution and tooth displacement distribution in each model. RESULTS: Overall analysis of the models: Compared to that in the normal model, the maximum von Mises stresses in all the different periapical bone defect size models were slightly lower. In contrast, the maximum tooth displacement in the periapical bone defect model increased as the size of the periapical bone defect increased (2.11-120.1% of increase). Internal analysis of tooth: As the size of the periapical bone defect increased, the maximum von Mises stress in the coronal cervix of the tooth gradually increased (2.23-37.22% of increase). while the von Mises stress in the root apical region of the tooth showed a decreasing trend (41.48-99.70% of decrease). The maximum tooth displacement in all parts of the tooth showed an increasing trend as the size of the periapical bone defect increased. CONCLUSIONS: The presence of periapical bone defects was found to significantly affect the biomechanical response of the tooth, the effects of which became more pronounced as the size of the bone defect increased.

The effect of root canal treatment and post-crown restorations on stress distribution in teeth with periapical periodontitis: a finite element analysis.

AIM: To evaluate the effects of root canal treatment (RCT) and post-crown restoration on stress distribution in teeth with periapical bone defects using finite element analysis. METHODOLOGY: Finite element models of mandibular second premolars and those with periapical bone defects (spherical defects with diameters of 5, 10, 15, and 20 mm) were created using digital model design software. The corresponding RCT and post-crown restoration models were constructed based on the different sizes of periapical bone defect models. The von Mises stress and tooth displacement distributions were comprehensively analyzed in each model. RESULTS: Overall analysis of the models: RCT significantly increased the maximum von Mises stresses in teeth with periapical bone defects, while post-crown restoration greatly reduced the maximum von Mises stresses. RCT and post-crown restoration slightly reduced tooth displacement in the affected tooth. Internal analysis of tooth: RCT dramatically increased the maximum von Mises stress in all regions of the tooth, with the most pronounced increase in the coronal surface region. The post-crown restoration balances the internal stresses of the tooth and is most effective in periapical bone defect - 20-mm model. RCT and post-crown restoration slightly reduced the tooth displacement in all regions of the affected tooth. CONCLUSIONS: Root canal treatment seemed not to improve the biomechanical state of teeth with periapical bone defects. In contrast, post-crown restoration might effectively balance the stress concentrations caused by periapical bone defects, particularly extensive ones.

Activation of PGC-1α-dependent mitochondrial biogenesis supports therapeutic effects of silibinin against type I diabetic periodontitis.

AIM: To investigate whether silibinin impacts diabetic periodontitis (DP) via mitochondrial regulation. MATERIALS AND METHODS: In vivo, rats were divided into control, diabetes, DP and DP combined with silibinin groups. Diabetes and periodontitis were induced by streptozocin and silk ligation, respectively. Bone turnover was evaluated by microcomputed tomography, histology and immunohistochemistry. In vitro, human periodontal ligament cells (hPDLCs) were exposed to hydrogen peroxide (H2 O2 ) with or without silibinin. Osteogenic function was analysed by Alizarin Red and alkaline phosphatase staining. Mitochondrial function and biogenesis were investigated by mitochondrial imaging assays and quantitative polymerase chain reaction. Activator and lentivirus-mediated knockdown of peroxisome proliferator-activated receptor gamma-coactivator 1-alpha (PGC-1α), a critical regulator of mitochondria biogenesis, was used to explore the mitochondrial mechanisms. RESULTS: Silibinin attenuated periodontal destruction and mitochondrial dysfunction and enhanced mitochondrial biogenesis and PGC-1α expression in rats with DP. Meanwhile, silibinin promoted cell proliferation, osteogenesis and mitochondrial biogenesis and increased the PGC-1α level in hPDLCs exposed to H2 O2 . Silibinin also protected PGC-1α from proteolysis in hPDLCs. Furthermore, both silibinin and activator of PGC-1α ameliorated cellular injury and mitochondrial abnormalities in hPDLCs, while knockdown of PGC-1α abolished the beneficial effect of silibinin. CONCLUSIONS: Silibinin attenuated DP through the promotion of PGC-1α-dependent mitochondrial biogenesis.

Vast ecosystem disturbance in a warming climate may jeopardize our climate goal of reducing CO2: a case study for megafires in the Australian 'black summer'.

A warming climate is one of the most important driving forces of intensified wildfires globally. The unprecedented wildfires broke out in the Australian 'Black Summer' (November 2019-February 2020), which released massive heat, gases, and particles into the atmosphere. The total carbon dioxide (CO2) emissions from wildfires were estimated at ∼963 million tons by using a top-down approach based on direct satellite measurements of CO2 and fire radiative power. The fire emissions have led to an approximately 50-80 folds increase in total CO2 emission in Australia compared with the similar seasons of 2014-2019. The excess CO2 from wildfires has offset almost half of the global anthropogenic CO2 emission reductions due to the Corona Virus Disease 2019 in 2020. When the wildfires were intense in December 2019, they caused a 1.48 watts per square meter additional positive radiative forcing above the monthly average in Australia and the vicinity. Our findings demonstrate that vast ecosystem disturbance in a warming climate can strongly influence the global carbon cycle and hamper our climate goal of reducing CO2.

Quantification and evaluation of atmospheric emissions from crop residue burning constrained by satellite observations in China during 2016-2020.

In rural regions of China, crop residue burning (CRB) is the major biomass burning activity, which can result in massive emissions of atmospheric particulate, greenhouse gas, and trace gas pollutants. Based on Himawari-8 satellite fire radiative power and agricultural statistics data, we implemented a daily inventory of agricultural fire emissions in 2016-2020 with a 2-km spatial resolution, including atmospheric pollutants such as CO2, CH4, CO, N2O, NOX, NH3, SO2, PM10, PM2.5, Hg, OC, EC, and NMVOCs. Our inventory constrained by geostationary satellite monitoring is more consistent with the actual CRB emissions in China, as many flaring events occur surreptitiously in the early morning and late evening to avoid regulation, which may be overlooked by polar-orbiting satellites. The spatiotemporal characterizations of various CRB emissions are found to be consistent with multiple satellite trace gas retrievals. We also assessed the effectiveness of field burning bans in China. Combined with other relevant datasets, it was found that although China has been advocating for a long time not to burn straw in the open field, CRB emissions was not successfully controlled nationwide until 2016. We estimated that the cumulative reduction of CO2 CRB emissions alone amounts to 809 ± 651 (2σ) teragram (Tg) during the 13th Five-Year Plan period (2016-2020), with an average value equivalent to 1.2 times the total annual territorial CO2 emissions by fossil fuels from Germany in 2021 (675 Tg, ranked 1st in EU27 and 7th in the world). Our inventory also suggests that continuous, long-term controls are necessary. Otherwise, CRB emissions may only be delayed on a seasonal scale, rather than reduced.

Impacts of TROPOMI-Derived NO X Emissions on NO2 and O3 Simulations in the NCP during COVID-19.

NO2 and O3 simulations have great uncertainties during the COVID-19 epidemic, but their biases and spatial distributions can be improved with NO2 assimilations. This study adopted two top-down NO X inversions and estimated their impacts on NO2 and O3 simulation for three periods: the normal operation period (P1), the epidemic lockdown period following the Spring Festival (P2), and back to work period (P3) in the North China Plain (NCP). Two TROPOspheric Monitoring Instrument (TROPOMI) NO2 retrievals came from the Royal Netherlands Meteorological Institute (KNMI) and the University of Science and Technology of China (USTC), respectively. Compared to the prior NO X emissions, the two TROPOMI posteriors greatly reduced the biases between simulations with in situ measurements (NO2 MREs: prior 85%, KNMI -27%, USTC -15%; O3 MREs: Prior -39%, KNMI 18%, USTC 11%). The NO X budgets from the USTC posterior were 17-31% higher than those from the KNMI one. Consequently, surface NO2 levels constrained by USTC-TROPOMI were 9-20% higher than those by the KNMI one, and O3 is 6-12% lower. Moreover, USTC posterior simulations showed more significant changes in adjacent periods (surface NO2: P2 vs P1, -46%, P3 vs P2, +25%; surface O3: P2 vs P1, +75%, P3 vs P2, +18%) than the KNMI one. For the transport flux in Beijing (BJ), the O3 flux differed by 5-6% between the two posteriori simulations, but the difference of NO2 flux between P2 and P3 was significant, where the USTC posterior NO2 flux was 1.5-2 times higher than the KNMI one. Overall, our results highlight the discrepancies in NO2 and O3 simulations constrained by two TROPOMI products and demonstrate that the USTC posterior has lower bias in the NCP during COVD-19.