How to transport veterinary drugs in insulated boxes to avoid thermal damage by heating or freezing.

BACKGROUND: The transport of veterinary drugs must comply with the general standards for drug storage. Although many vehicles are equipped with active heating and/or cooling devices assuring recommended storage conditions, simple insulated transport boxes are also often used. In this study, measurements for typical transport boxes were performed under laboratory conditions by the use of a climate chamber for a temperature of -20 °C and 45 °C to investigate the impact of box size, insulation material, liquid vs. dry filling products, filling degree and other parameters on the thermal performance of insulated boxes. Model calculations and instructions are presented to predict the retention time of recommended drug storage temperatures. RESULTS: The measurements and the model calculations showed that the loading of the transport boxes with additional water bottles to increase the heat capacity is appropriate to prolong the retention time of the recommended temperature range of the drugs. Insulated transport boxes are not suitable to store drugs over a period of more than approximately 12 h. For practical use a recipe is presented to measure the thermal properties of a transport box and the related retention time for which the recommended storage temperatures can be assured. CONCLUSIONS: The following principles for drug transportation in vehicles are recommended: (1) Before transfer into boxes, drugs should always be thermally preconditioned (2) Increase the filling degree of the boxes with thermally preconditioned water bottles or re-usable thermal packs will increase the heat capacity. Do not deep-freeze the bottles or packs below 0 °C to avoid drug freezing due to contact. (3) Open the lid of the boxes only to uncase drugs that are immediately needed. (4) The bigger the box and the higher the filling degree, the longer the retention time of the transport box. (5) Wherever possible, place the drug box at a cool site inside the vehicle. (6) The monitoring of the inside temperature of the transport boxes is recommended. By the proper use of such transport boxes the recommended temperatures can be maintained over one working day.

Laser-induced acoustic desorption of natural and functionalized biochromophores.

Laser-induced acoustic desorption (LIAD) has recently been established as a tool for analytical chemistry. It is capable of launching intact, neutral, or low charged molecules into a high vacuum environment. This makes it ideally suited to mass spectrometry. LIAD can be used with fragile biomolecules and very massive compounds alike. Here, we apply LIAD time-of-flight mass spectrometry (TOF-MS) to the natural biochromophores chlorophyll, hemin, bilirubin, and biliverdin and to high mass fluoroalkyl-functionalized porphyrins. We characterize the variation in the molecular fragmentation patterns as a function of the desorption and the VUV postionization laser intensity. We find that LIAD can produce molecular beams an order of magnitude slower than matrix-assisted laser desorption (MALD), although this depends on the substrate material. Using titanium foils we observe a most probable velocity of 20 m/s for functionalized molecules with a mass m = 10,000 Da.