Two-Dimensional MXene as a Promising Adsorbent for Trihalomethanes Removal: A Density-Functional Theory Study.

This groundbreaking research delves into the intricate molecular interactions between MXene and trihalomethanes (THs) through a comprehensive theoretical study employing density-functional theory (DFT). Trihalomethanes are common carcinogenic chlorination byproducts found in water sanitation systems. This study focuses on a pristine MXene [Mn+1·Xn] monolayer and its various terminal [Tx] functional groups [Mn+1·XnTx], strategically placed on the surface for enhanced performance. Our investigation involves a detailed analysis of the adsorption energies of THs on different MXene types, with the MXene-Cl layer emerging as the most compatible variant. This specific MXene-Cl layer exhibits remarkable properties, including a total dipole moment (TDM) of 12.443 Debye and a bandgap of 0.570 eV, achieved through meticulous geometry optimization and computational techniques. Notably, THs such as trichloromethane (CHCl3), bromide-chloromethane (CHBrCl2), and dibromochloromethane (CHBr2Cl) demonstrate the highest TDM values, indicating substantial changes in electronic and optical parameters, with TDM values of 16.363, 15.998, and 16.017 Debye, respectively. These findings highlight the potential of the MXene-Cl layer as an effective adsorbent and detector for CHF3, CHClF2, CHCl3, CHBrCl2, and CHBr2Cl. Additionally, we observe a proportional increase in the TDM and bandgap energy, indicative of conductivity, for various termination atom combinations, such as Mxene-O-OH, Mxene-O-F, Mxene-O-Cl, Mxene-OH-F, Mxene-F-Cl, and Mxene-OH-Cl, with bandgap energies measured at 0.734, 0.940, 1.120, 0.835, and 0.927 eV, respectively. Utilizing DFT, we elucidate the adsorption energies of THs on different MXene surfaces. Our results conclusively demonstrate the significant influence of the termination atom nature and quantity on MXene's primitive TDM value. This research contributes to our understanding of MXene-THs interactions, offering promising avenues for the development of efficient adsorbents and detectors for THs. Ultimately, these advancements hold the potential to revolutionize water sanitation practices and enhance environmental safety.

Terbium Removal from Aqueous Solutions Using a In2O3 Nanoadsorbent and Arthrospira platensis Biomass.

Terbium is a rare-earth element with critical importance for industry. Two adsorbents of different origin, In2O3 nanoparticles and the biological sorbent Arthrospira platensis, were applied for terbium removal from aqueous solutions. Several analytical techniques, including X-ray diffraction, Fourier-transform infrared spectroscopy, and scanning electron microscopy, were employed to characterize the adsorbents. The effect of time, pH, and terbium concentration on the adsorption efficiency was evaluated. For both adsorbents, adsorption efficiency was shown to be dependent on the time of interaction and the pH of the solution. Maximum removal of terbium by Arthrospira platensis was attained at pH 3.0 and by In2O3 at pH 4.0-7.0, both after 3 min of interaction. Several equilibrium (Langmuir, Freundlich, and Temkin) and kinetics (pseudo-first order, pseudo-second order, and Elovich) models were applied to describe the adsorption. The maximum adsorption capacity was calculated from the Langmuir model as 212 mg/g for Arthrospira platensis and 94.7 mg/g for the In2O3 nanoadsorbent. The studied adsorbents can be regarded as potential candidates for terbium recovery from wastewater.

ZnO doped C: Facile synthesis, characterization and photocatalytic degradation of dyes.

Carbon doped ZnO nanoparticles have been synthesized from the thermal decomposition of Zinc citrate precursor. The precursor was synthesized from semi-solid paste and then subjected to calcination at 700 °C to produce ZnO nanoparticles. The precursor and ZnO were characterized by Fourier Transform Infrared Spectroscopy, UV-visible (UV-Vis) spectra, Transmission Electron Microscope, Field Emission Scanning Electron Microscope, Energy Dispersive Analysis by X-ray (EDAX), X-ray powder diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The results ensured the formation of hexagonal 2D-ZnO nanoparticles with a layer thickness of 25 nm. The optical band gap of ZnO was determined and found to be 2.9 eV, which is lower than the bulk. Photocatalytic degradation of Fluorescein dye as an anionic dye and Rhodamine B as a cationic dye was evaluated via C-ZnO NPs under UV irradiation. ZnO displayed 99% degradation of Fluorescein dye after 240 min and a complete photocatalytic degradation of Rhodamine B dye after 120 min under UV irradiation.

Synthesis, structural, optical and anti-rheumatic activity of metal complexes derived from (E)-2-amino-N-(1-(2-aminophenyl)ethylidene)benzohydrazide (2-AAB) with Ru(III), Pd(II) and Zr(IV).

Three new metal complexes derived from Pd(II), Ru(III) and Zr(IV) with (E)-2-amino-N-(1-(2-aminophenyl)ethylidene)benzohydrazide (2-AAB) have been synthesized. The isolated complexes were characterized by elemental analyses, FT-IR, UV-Vis, ES-MS, (1)H NMR, XRD, thermal analyses (TGA and DTA) and conductance. The morphology and the particle size were determined by transmittance electron microscope (TEM). The results showed that, the ligand coordinates to Pd(II) in the enol form, while it coordinates to Ru(III) and Zr(IV) in the keto form. A square planar geometry is suggested for Pd(II) complex and octahedral geometries are suggested for Ru(III) and Zr(IV) complexes. The optical band gaps of the isolated complexes were measured and indicated the semi-conductivity nature of the complexes. The anti-inflammatory and analgesic activities of the ligand and its complexes showed that, Ru(III) complex has higher effect than the well known drug "meloxicam".

Synthesis, spectral characterization and DNA binding of Schiff-base metal complexes derived from 2-amino-3-hydroxyprobanoic acid and acetylacetone.

Four new metal complexes derived from the reaction of Cu(II), Co(II), Ni(II) and Zn(II) acetates with the Schiff-base ligand (H3L) resulted from the condensation of the amino acid 2-amino-3-hydroxyprobanoic acid (serine) and acetylacetone have been synthesized and characterized by, elemental analyses, ES-MS, IR, UV-Vis., 1H NMR, 13C NMR, ESR, thermal analyses (TGA and DTG) and magnetic measurements. The results showed that the Schiff-base ligand acts as bi-negative tridentate through the azomethine nitrogen, the deprotonated carboxylate oxygen and the enolic carbonyl oxygen. The optical band gaps measurements indicated the semi-conducting nature of these complexes. Molecular docking was used to predict the binding between the Schiff base ligand with the receptor of prostate cancer mutant H874Y. The interactions between the Cu(II) complex and calf thymus DNA (CT-DNA) have been studied by UV spectra. The results confirm that the Cu(II) complex binds to CT-DNA in an intercalative mode.