Effect of calcination temperature induced structural modifications on the photocatalytic efficacy of Fe2O3-ZrO2 nanostructures: mechanochemical synthesis.

Water contamination due to organic pollutants is a challenging issue around the globe, and several attempts have been made to deal with this issue. Out of which, the semiconductor-based photocatalytic process had gained much attention and proved to be an efficient, easy, and economical process for the removal of organic dyes from aqueous solutions. For this purpose, the iron oxide-zirconium dioxide nanocomposite (Fe2O3-ZrO2 NC) was prepared via a simple mechanochemical process using a mortar and pestle, followed by a calcination process at 300, 600, and 900 °C. Different physicochemical analyses were carried out in order to investigate the successful synthesis of Fe2O3-ZrO2 NC and the effect of temperature on the crystallinity, surface area, pore size, phase composition, sample morphology, and particle/crystallite size. The Fe2O3-ZrO2 NCs were subjected to a photocatalytic test under solar light irradiation against fluorescein dye in an aqueous medium, and the photocatalytic performance was examined under the influence of calcination temperatures, pH, catalyst dose, and initial concentration. The stability of the Fe2O3-ZrO2 NCs was also checked by recycling them for five reuse cycles.

BET inhibition decreases HMGCS2 and sensitizes resistant pancreatic tumors to gemcitabine.

Efforts to develop targetable molecular bases for drug resistance for pancreatic ductal adenocarcinoma (PDAC) have been equivocally successful. Using RNA-seq and ingenuity pathway analysis we identified that the superpathway of cholesterol biosynthesis is upregulated in gemcitabine resistant (gemR) tumors using a unique PDAC PDX model with resistance to gemcitabine acquired in vivo. Analysis of additional in vitro and in vivo gemR PDAC models showed that HMG-CoA synthase 2 (HMGCS2), an enzyme involved in cholesterol biosynthesis and rate limiting in ketogenesis, is overexpressed in these models. Mechanistic data demonstrate the novel findings that HMGCS2 contributes to gemR and confers metastatic properties in PDAC models, and that HMGCS2 is BRD4 dependent. Further, BET inhibitor JQ1 decreases levels of HMGCS2, sensitizes PDAC cells to gemcitabine, and a combination of gemcitabine and JQ1 induced regressions of gemR tumors in vivo. Our data suggest that decreasing HMGCS2 may reverse gemR, and that HMGCS2 represents a useful therapeutic target for treating gemcitabine resistant PDAC.

Heavy metals in afforested mangrove sediment from the world's largest delta: Distributional mapping, contamination status, risk assessment and source tracing.

This study aims to assess seasonal and spatial variations, contamination status, ecological risks, and metal sources (Ni, Pb, Cr, Cu, Mn, and Zn) in human-afforested mangrove sediments in a deltaic region. Five sampling locations were sampled during dry and wet seasons. Heavy metal concentrations followed the order: Mn > Zn > Ni > Cr > Cu > Pb. Metal loads, except Cu and Pb, were higher during the dry season, aligning with national and international recommendations. Sediment quality guidelines, contamination factor, geoaccumulation index, enrichment factors, and pollution load index indicated uncontaminated sediment in both seasons. Potential ecological risk assessment showed low risk conditions in all sites. However, modified hazard quotient indicated moderate pollution risk from all metals except Pb. Analysis suggests anthropogenic sources, particularly evident near shipbreaking yards in Sitakunda. While initially uncontaminated, ongoing metal influx poses a potential risk to mangrove ecosystems.

The impact of CBz-PAI interlayer in various HTL-based flexible perovskite solar cells: A drift-diffusion numerical study.

In perovskite solar cells (PSCs), the charge carrier recombination obstacles mainly occur at the ETL/perovskite and HTL/perovskite interfaces, which play a decisive role in the solar cell performance. Therefore, this study aims to enhance the flexible PSC (FPSC) efficiency by adding the newly designed CBz-PAI-interlayer (simply CBz-PAI-IL) at the perovskite/HTL interface. In addition, substantial work has been carried out on five different HTLs (Se/Te-Cu2O, CuGaO2, V2O5, and CuSCN, including conventional Spiro-OMeTAD as a reference HTL with and without CBz-PAI-IL), using drift-diffusion simulation to find suitable FPSC design to attain the maximum PCE. Interestingly, PET/ITO/AZO/ZnO NWs/FACsPbBrI3/CBz-PAI/Se/Te-Cu2O/Au device architecture demonstrates the highest achievable power conversion efficiency (PCE) of 27.9 %. The findings of this study confirmed that the reference device (without IL) displays a large valence band edge (VBE)/highest occupied molecular orbital (HOMO) energy level misalignment compared to the modified interface device (with CBz-PAI-IL that reduces VBE/HOMO level mismatch) that eases the hole transport, simultaneously, it reduces the charge carrier recombinations at the interface, resulting in diminished Voc losses in the device. Furthermore, the influence of perovskite absorber thickness and defect density, parasitic resistances, and working temperature are systematically examined to govern the superior FPSC efficiency and concurrently understand the device physics.

Predicting malaria outbreak in The Gambia using machine learning techniques.

Malaria is the most common cause of death among the parasitic diseases. Malaria continues to pose a growing threat to the public health and economic growth of nations in the tropical and subtropical parts of the world. This study aims to address this challenge by developing a predictive model for malaria outbreaks in each district of The Gambia, leveraging historical meteorological data. To achieve this objective, we employ and compare the performance of eight machine learning algorithms, including C5.0 decision trees, artificial neural networks, k-nearest neighbors, support vector machines with linear and radial kernels, logistic regression, extreme gradient boosting, and random forests. The models are evaluated using 10-fold cross-validation during the training phase, repeated five times to ensure robust validation. Our findings reveal that extreme gradient boosting and decision trees exhibit the highest prediction accuracy on the testing set, achieving 93.3% accuracy, followed closely by random forests with 91.5% accuracy. In contrast, the support vector machine with a linear kernel performs less favorably, showing a prediction accuracy of 84.8% and underperforming in specificity analysis. Notably, the integration of both climatic and non-climatic features proves to be a crucial factor in accurately predicting malaria outbreaks in The Gambia.

Enhancing Carrier Mobility in Monolayer MoS2 Transistors with Process-Induced Strain.

Two-dimensional electronic materials are a promising candidate for beyond-silicon electronics due to their favorable size scaling of electronic performance. However, a major challenge is the heterogeneous integration of 2D materials with CMOS processes while maintaining their excellent properties. In particular, there is a knowledge gap in how thin film deposition and processes interact with 2D materials to alter their strain and doping, both of which have a drastic impact on device properties. In this study, we demonstrate how to utilize process-induced strain, a common technique extensively applied in the semiconductor industry, to enhance the carrier mobility in 2D material transistors. We systematically varied the tensile strain in monolayer MoS2 transistors by iteratively depositing thin layers of high-stress MgOx stressor. At each thickness, we combined Raman spectroscopy and transport measurements to unravel and correlate the changes in strain and doping within each transistor with their performance. The transistors displayed uniform strain distributions across their channels for tensile strains of up to 0.48 ± 0.05%, at 150 nm of stressor thickness. At higher thicknesses, mechanical instability occurred, leading to nonuniform strains. The transport characteristics systematically varied with strain, with enhancement in electron mobility at a rate of 130 ± 40% per % strain and enhancement of the channel saturation current density of 52 ± 20%. This work showcases how established CMOS technologies can be leveraged to tailor the transport in 2D transistors, accelerating the integration of 2D electronics into a future computing infrastructure.

Metabolic adaptations in cancer stem cells: A key to therapy resistance.

Cancer stem cells (CSCs) are a subset of tumor cells that can initiate and sustain tumor growth and cause recurrence and metastasis. CSCs are particularly resistant to conventional therapies compared to their counterparts, owing greatly to their intrinsic metabolic plasticity. Metabolic plasticity allows CSCs to switch between different energy production and usage pathways based on environmental and extrinsic factors, including conditions imposed by conventional cancer therapies. To cope with nutrient deprivation and therapeutic stress, CSCs can transpose between glycolysis and oxidative phosphorylation (OXPHOS) metabolism. The mechanism behind the metabolic pathway switch in CSCs is not fully understood, however, some evidence suggests that the tumor microenvironment (TME) may play an influential role mediated by its release of signals, such as Wnt/ß-catenin and Notch pathways, as well as a background of hypoxia. Exploring the factors that promote metabolic plasticity in CSCs offers the possibility of eventually developing therapies that may more effectively eliminate the crucial tumor cell subtype and alter the disease course substantially.

Evaluation of Intradialytic Complications and Protein Catabolic Rate on Maintenance Hemodialysis Patients in Bangladesh.

Among patients with chronic kidney disease stage-5 who are treated with dialysis, intradialytic complications commonly occur during routine hemodialysis (HD). It could be either patient related or mechanical. Protein catabolic rate during hemodialysis is a determinant of the mortality. nPCR was aimed to targets according to International guideline. This observational study was conducted in the Department of Nephrology, Mymensingh Medical College Hospital, Bangladesh from January 2020 to December 2020 to compare two groups of nPCR and different value of biochemical parameters. This study was involving all patients and inclusion criteria were patients who underwent routine HD for at least three months. All patients under-went conventional intermittent HD with low-flux dialyser. A total of 179 patients enrolled. Serum albumin, serum calcium, phosphate, hemoglobin and pre-dialysis urea, post dialysis urea were measured from blood sample. The nPCR was calculated by the standard international equation. nPCR value of 14.0% patients was more than 1.0 gm/kg/day and average nPCR (mean±SD) of all patients was 0.903±0.09gm/kg/day and 86.0% patients nPCR was less than 1.0 gm/kg/day. Biochemical parameters were not significantly differing between two groups. The nPCR is an indicator, can help the determination of nutritional status. This study aimed to find out the intradialytic complications, mean value of nPCR and correlation of biochemical parameters among ESRD patients on maintenance hemodialysis.

Risk Factors of Patients with Postpartum Acute Kidney Injury: An Observational Study.

Postpartum acute kidney injury (AKI) is a condition characterized by a sudden and rapid decline in kidney function that occurs shortly after childbirth. Several risk factors may be associated with postpartum acute kidney injury (AKI). Understanding the possible risk factors is essential for timely intervention and improved maternal healthcare. The aim of the study was to assess the risk factors of postpartum acute kidney injury patients. This prospective observational study took place at Mymensingh Medical College Hospital, from March 2020 to April 2021. It was carried out in the Departments of Nephrology and Departments of Obstetrics & Gynecology, where 153 postpartum acute kidney injury (AKI) patients were enrolled through purposive sampling. The study collected data on patient demographics, etiology and presentation. Statistical analysis was conducted using SPSS (Statistical Package for the Social Sciences) version 26.0, with a significance threshold set at p<0.05 for all tests. Among participants, puerperal sepsis (77.8%) and toxemia of pregnancy (58.8%) were prevalent risk factors. Intrauterine death was rare (1.3%). Other risk factors such as postpartum hemorrhage 22.2%, HELLP syndrome 11.1%, and antepartum hemorrhage 15.0% were found. A statistically significant difference in postpartum hemorrhage prevalence (p=0.038) was noted between hemodialysis and non-hemodialysis patients. Puerperal sepsis is the most common risk factor for postpartum acute kidney injury, closely followed by toxemia of pregnancy. Intrauterine death is rare, while postpartum hemorrhage significantly affects subjects, with variations noted between hemodialysis and non-hemodialysis patients.

The contribution of homestead pond fish culture to household food security and dietary diversity in central coast of a developing country.

Fish farming in homestead ponds help alleviate poverty, provide animal source food, micronutrients, and indirect income and various jobs in developing nations. This study investigated the impact of homestead pond fish farming on dietary diversity (HDDS and MDD-W), food security (HFIAS and ELCSA), income, and women's engagement. A total of 185 households were selected randomly for data collection through well-structured questionnaire interviews in the central coast of Bangladesh. HDDS revealed significant dietary diversity (73.3%) among beneficiary farmers, surpassing controls and nearly doubling that of non-aquaculture farmers (41.1%). Additionally, this study found that 86.7% and 74.3% of women in beneficiary and homestead pond farmers exhibited high dietary diversity (MDD-W ≥ 5), whereas 48.6% of women in non-aquaculture farmers' households had low dietary diversity (MDD-W ≥ 5). Based on both ELCSA and HFIAS, higher prevalence of food security was observed among the beneficiary farmers that was about 60% and 63.3%, respectively compared with the control farmers. Most non-aquaculture farmers (62.9%) indicated their family consumed fish for one week before the research. More than half of the homestead pond culture (55.7%) and more than 90% of the beneficiary farmers, aquaculture farmers and non-aquaculture farmers had gross income (<$ 500). Pertaining to women's participation in homestead pond was positively correlated to productivity while male dominated tasks was negatively correlated with productivity. The results offer insights into how homestead pond fish farming can enhance food security by supplying direct animal protein, addressing protein and micronutrient deficiencies, and boosting income. The study emphasizes the urgent necessity for training and promoting homestead pond culture, increasing female participation, and advocating comprehensive support from governmental organizations (GOs) and non-governmental organizations (NGOs) to optimize production, improve micronutrient adequacy, and guarantee household food security. Keywords: Fish farming, food security, dietary diversity, women's participation.

Antibacterial Activities of Methanolic Seeds Extract of Black pepper (Piper nigrum L.) against Gram Positive Staphylococcus aureus & Gram-Negative Escherichia coli.

Evaluation of the in vitro antibacterial activity of Methanolic extracts isolated from Black pepper seeds (Piper nigrum L.) against two infection causing pathogens, Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli. Between July 2022 and June 2023, this experimental study was conducted at the Mymensingh Medical College's Department of Pharmacology and Therapeutics in conjunction with the Department of Microbiology. Using the disc diffusion and broth dilution methods, the antibacterial activity of methanolic extract of black pepper seeds (MBPE) was evaluated at various doses. The solvents Methanol and 10.0% Di Methyl Sulfoxide (DMSO) were used to make the extract. Using the broth dilution procedure, the conventional antibiotic Ciprofloxacin was utilized and the outcome was contrasted with that of Methanol extracts. Methanolic extract of black pepper seeds (MBPE) at seven distinct concentrations (100, 80, 60, 40, 20, 10 and 5 mg/ml) were utilized, then later in chosen concentrations as needed to confirm the extracts' more precise margin of antimicrobial sensitivity. At 80 mg/ml and above doses of the MBPE, it had an inhibitory impact against the aforementioned microorganisms. For Staphylococcus aureus and Escherichia coli the MIC were 60 and 75 mg/ml in MBPE respectively. As of the MIC of Ciprofloxacin was 1µg/ml against Staphylococcus aureus and Escherichia coli. In comparison to MICs of MBPE for the test organisms, the MIC of Ciprofloxacin was the lowest. This study clearly shows that Staphylococcus aureus and Escherichia coli are sensitive to the methanolic extract of black pepper seeds' antibacterial properties.

Comparative Efficacy and Safety of Amlodipine and Losartan Potassium in Essential Hypertension in a Tertiary Hospital of Bangladesh.

Hypertension is a common disorder of major clinical, public health and economic importance. It affects men and women of all ages, and the prevalence is increasing in most countries. Maintenance of blood pressure below 140/90 mm of Hg is recommended by most of the guideline available around the world. Various classes of drugs are being used in the treatment of hypertension. Losartan potassium and amlodipine are two different antihypertensive agents belonging to two different groups used commonly around the world in treating essential hypertension. Losartan potassium is non-peptide Angiotensin-II receptor antagonist. Amlodipine which is the third generation dihydropyridine group of calcium channel blocker. The aim of the study was to compare the efficacy and safety of amlodipine and losartan for the treatment of essential hypertensive patients (18-75 years). A non-randomized comparative observational study was conducted in the Department of Pharmacology and Therapeutics in collaboration with Department of Medicine, Sylhet, MAG Osmani Medical College, Sylhet, Bangladesh from July 2021 to June 2022. In this study non-randomization was in two groups. Group A received amlodipine 5mg daily at morning and Group B received losartan potassium 50mg daily at night. The study parameters were systolic blood pressure (SBP), diastolic blood pressure (DBP), ankle oedema, serum K+ level. The result of treatment outcome was compared between two groups. After treatment the reduction of SBP was 5.19±2.93mm of Hg versus 3.27±1.34mm of Hg (p<0.001); reduction of DBP was 1.7±0.70 mm of Hg versus 0.68 mm of Hg (p<0.001) and serum K+ level 4.22±0.27mmol/L versus 4.21±0.16mmol/L (p<0.719) in amlodipine and losartan group respectively. Amlodipine is more effective than losartan potassium in respect to treatment of essential hypertension. Regarding adverse events losartan potassium causes angioedema, hyperkalemia, headache, dizziness etc. The study concluded that amlodipine is superior to losartan potassium in treating essential hypertension.

Evaluation of Antimicrobial Efficacy and Clinical Outcomes of Triphala and 2.5% Sodium Hypochlorite as Intraradicular Irrigants in Pulpectomy of Primary Teeth.

A natural irrigation solution with a broad spectrum of antimicrobial coverage, triphala was selected for the pulpectomy procedure. Because of its natural ingredients, it is well-known for promoting tissue healing. It also supposedly has certain additional qualities as compared to usual irrigation solutions that are made chemically. Although 2.5% NaOCl is thought to be perfect since it meets most of the requirements for an irrigation solution but it cannot be optimized for pulpectomy procedure. Primary teeth that were recommended for pulpectomy underwent this randomized controlled experiment. Two groups of eighty-four primary teeth were randomly assigned to receive irrigations: triphala in Group A; 2.5% Sodium hypochlorite in Group B. Sample were taken from infected primary root canals. A sterile test tube with bhi broth as the transport media was used to collect pre- and post-irrigation samples using sterile absorbent paper tips. On agar media, microorganisms were cultivated and their mean colony count was assessed. Following the procedure, the patient's follow-up visits at one, two and three months were used to evaluate the clinical result. The post-microbial colony count was dramatically reduced (p<0.001) by both irrigation treatments. Triphala in Group A is demonstrating desirable efficacy. Clinical success was found satisfactory in both the groups studied (p<0.001). But statistically significant difference was not found (p=0.175). Considering undesirable properties of sodium hypochlorite triphala can be a better alternative as a root canal irrigants in pulpectomy of primary teeth.

Synergistic Blends of Sodium Alginate and Pectin Biopolymer Hosts as Conducting Electrolytes for Electrochemical Applications.

The world needs sustainable energy resources with affordable, economic, and accountable sources. Consequently, energy innovation technologies are evolving toward electrochemical applications like batteries, supercapacitors, etc. The current study involves the solid blend biopolymer electrolyte (SBBE) with different compositions of sodium alginate blended with pectin via the casting technique. The characterization of the sample was tested by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, AC impedance, linear sweep voltammetry (LSV), and cyclic voltammetry (CV) analyses. Evidently, the sample NP4 (NaAlg/pectin = 60:40 wt %) has a higher conductivity of 1.26 × 10-7 and 3.25 × 10-6 S cm-1 at 303 and 353 K, respectively. The performances of the samples were analyzed with variations in temperature, frequency, and time responses to signify the blended nature of the electrolyte. Hence, the studied biopolymers can be constructed for electrochemical device applications.

Correction: Development of electrochemical sensors for quick detection of environmental (soil and water) NPK ions.

[This corrects the article DOI: 10.1039/D4RA00034J.].

Clinical severity of enteric viruses detected using a quantitative molecular assay compared to conventional assays in the Global Enteric Multicenter Study.

BACKGROUND: Quantitative molecular assays are increasingly used for detection of enteric viruses. METHODS: We compared the clinical severity using modified Vesikari score (mVS) of enteric viruses detected by conventional assays (enzyme immunoassays [EIA] for rotavirus and adenovirus 40/41 and conventional polymerase chain reaction for astrovirus, sapovirus, and norovirus) and a quantitative molecular assay (TaqMan Array Card [TAC]) among children aged 0-59 months in the Global Enteric Multicenter Study. For rotavirus and adenovirus 40/41, we compared severity between EIA-positive and TAC-positive cases assigned etiologies using different cycle threshold (CT) cutoffs. RESULTS: Using conventional assays, the median (interquartile range) mVS was 10 (8, 11) for rotavirus, 9 (7, 11) for adenovirus 40/41, 8 (6, 10) for astrovirus, sapovirus, and norovirus GII, and 7 (6, 9) for norovirus GI. Compared to rotavirus EIA-positive cases, the median mVS was 2 and 3 points lower for EIA-negative/TAC-positive cases with CT<32.6 and 32.6≤CT<35, respectively (p-value<.0001). Adenovirus 40/41 EIA-positive and EIA-negative/TAC-positive cases were similar, regardless of CT cutoff. CONCLUSIONS: Quantitative molecular assays compared to conventional assays, such as EIA, may influence severity of identified cases, especially for rotavirus. Cutoffs to assign etiology for quantitative assays should be considered in the design and interpretation of enteric virus studies.

Duodenal quantitative mucosal morphometry in children with environmental enteric dysfunction: a cross-sectional multi-country analysis.

BACKGROUND: Environmental enteric dysfunction (EED), a chronic inflammatory condition of the small intestine, is an important driver of childhood malnutrition globally. Quantifying intestinal morphology in EED allows for exploration of its association with functional and disease outcomes. OBJECTIVE: We sought to define morphometric characteristics of childhood EED and determine whether morphology features were associated with disease pathophysiology. METHODS: Morphometric measurements and histology were assessed on duodenal biopsy slides for this cross-sectional study from children with EED in Bangladesh, Pakistan, and Zambia (n=69), and those with no pathologic abnormality (NPA; n=8) or celiac disease (n=18) in North America. Immunohistochemistry was also conducted on 46, 8, and 18 biopsy slides, respectively. Linear mixed-effects regression models were used to reveal morphometric differences between EED compared to NPA or celiac disease, and identify associations between morphometry and histology or immunohistochemistry amongst children with EED. RESULTS: In duodenal biopsies, median EED villus height (248 µm), crypt depth (299 µm), and villus:crypt (V:C) ratio (0.9) values ranged between those of NPA (396 µm villus height; 246 µm crypt depth; 1.6 V:C ratio) and celiac disease (208 µm villus height; 365 µm crypt depth; 0.5 V:C ratio). Among EED biopsy slides, morphometric assessments were not associated with histologic parameters or immunohistochemical markers, other than pathologist determined subjective semi-quantitative villus architecture. CONCLUSIONS: Morphometric analysis of duodenal biopsy slides across geographies identified morphologic features of EED, specifically short villi, elongated crypts, and a smaller V:C ratio relative to NPA slides; although not as severe as in celiac slides. Morphometry did not explain other EED features, suggesting that EED histopathologic processes may be operating independently of morphology. While acknowledging the challenges with obtaining relevant tissue, these data form the basis for further assessments of the role of morphometry in EED.

Random mutagenesis and transcriptomics-guided rational engineering in Zygosaccharomyces rouxii for elevating D-arabitol biosynthesis.

D-arabitol, a versatile compound with applications in food, pharmaceutical, and biochemical industries, faces challenges in biomanufacturing due to poor chassis performance and unclear synthesis mechanisms. This study aimed to enhance the performance of Zygosaccharomyces rouxii to improve D-arabitol production. Firstly, a mutant strain Z. rouxii M075 obtained via atmospheric and room temperature plasma-mediated mutagenesis yielded 42.0 g/L of D-arabitol at 96 h, with about 50 % increase. Transcriptome-guided metabolic engineering of pathway key enzymes co-expression produced strain ZR-M3, reaching 48.9 g/L D-arabitol after 96 h fermentation. Finally, under optimized conditions, fed-batch fermentation of ZR-M3 in a 5 L bioreactor yielded an impressive D-arabitol titer of 152.8 g/L at 192 h, with a productivity of 0.8 g/L/h. This study highlights promising advancements in enhancing D-arabitol production, offering potential for more efficient biomanufacturing processes and wider industrial applications.

Achieving Well-Oriented FAPbI3 Perovskite Photovoltaics by Cyclohexane Modification.

It is essential and challenging to develop green and cost-effective solar cells to meet the energy demands. Solar cells with a perovskite light-harvesting layer are the most promising technology to propel the world toward next-generation solar energy. Formamidinium lead tri-iodide (FAPbI3)-based perovskite solar cells (F-PSCs), with their considerable performance, offer cost-effective solar cells. One of the major issues that the PSC community is now experiencing is the stability of α-FAPbI3 at relatively low temperatures. In this study, we fabricated FAPbI3-PSCs using cyclohexane (CHX) material via a two-step deposition method. For this purpose, CHX is added to the formamidinium iodide:methylammonium chloride (FAI:MACl) solution as an additive and used to form a better FAPbI3 layer by controlling the reaction between FAI and lead iodide (PbI2). The CHX additive induces the reaction of undercoordinated Pb2+ with FAI material and produces an α-FAPbI3 layer with low charge traps and large domains. In addition, the CHX-containing FAPbI3 layers show higher carrier lifetimes and facilitate carrier transfer in F-PSCs. The CHX-modified F-PSCs yield a high champion efficiency of 22.84% with improved ambient and thermal stability behavior. This breakthrough provides valuable findings regarding the formation of a desirable FAPbI3 layer for photovoltaic applications and holds promise for the industrialization of F-PSCs.