Printable Perovskite Diodes for Broad-Spectrum Multienergy X-Ray Detection.

Multienergy X-ray detection is critical to effectively differentiate materials in a variety of diagnostic radiology and nondestructive testing applications. Silicon and selenium X-ray detectors are the most common for multienergy detection; however, these present poor energy discrimination across the broad X-ray spectrum and exhibit limited spatial resolution due to the high thicknesses required for radiation attenuation. Here, an X-ray detector based on solution-processed thin-film metal halide perovskite that overcomes these challenges is introduced. By harnessing an optimized n-i-p diode configuration, operation is achieved across a broad range of soft and hard X-ray energies stemming from 0.1 to 10's of keV. Through detailed experimental and simulation work, it is shown that optimized Cs0.1 FA0.9 PbI3 perovskites effectively attenuate soft and hard X-rays, while also possessing excellent electrical properties to result in X-ray detectors with high sensitivity factors that exceed 5 × 103 µ C G y Vac - 1 cm - 2 $\mu {\rm{C}}\;{{\bf Gy}}_{{\rm{Vac}}}^{ - 1}\;{\rm{c}}{{\rm{m}}^{ - 2}}$ and 6 × 104 µC Gy-1 cm-2 within soft and hard X-ray regimes, respectively. Harnessing the solution-processable nature of the perovskites, roll-to-roll printable X-ray detectors on flexible substrates are also demonstrated.

Superior Magnetoresistance Performance of Hybrid Graphene Foam/Metal Sulfide Nanocrystal Devices.

Interfaces between metals and semiconducting materials can inevitably influence the magnetotransport properties, which are crucial for technological applications ranging from magnetic sensing to storage devices. By taking advantage of this, a metallic graphene foam is integrated with semiconducting copper-based metal sulfide nanocrystals, i.e., Cu2ZnSnS4 (copper-zinc-tin-sulfur) without direct chemical bonding and structural damage, which creates numerous nanoboundaries that can be basically used to tune the magnetotransport properties. Herein, the magnetoresistance of a graphene foam is enhanced from nearly 90 to 130% at room temperature and under the application of 5 T magnetic field strength due to the addition of Cu2ZnSnS4 nanocrystals in high densities. We believe that the enhancement of magnetoresistance in hybrid graphene foam/Cu2ZnSnS4 nanocrystals is due to the evolution of the mobility fluctuation mechanism, triggered by the formation of nanoboundaries. Incorporating Cu2ZnSnS4 nanocrystals into a graphene foam not only provides an effective way to further enhance the magnitude of magnetoresistance but also opens a suitable window to achieve efficient and highly functional magnetic sensors with a large, linear, and controllable response.