The Relationship between Ionic Conductivity and Solvation Structures of Localized High-Concentration Fluorinated Electrolytes for Lithium-Ion Batteries.

Localized high-concentration electrolytes (LHCEs) combine a diluent with a high-concentration electrolyte, offering promising properties. The ions, solvent, and diluent interact to form complex heterogeneous liquid structures, where high salt concentration clusters are embedded in the diluent. Optimizing LHCEs for desired electrolyte properties like high ionic conductivity, low viscosity, and effective solid electrolyte interphase (SEI) formation ability within the vast chemical and compositional design space requires deeper understanding and theoretical guidance. We investigated the structures and conductivities of LHCEs based on a fluorinated solvent with two different diluents at varying concentrations. 2,2,3,3-Tetrafluoropropyl trifluoroacetate (TFPTFA) enters the solvation cluster due to its stronger Li-ion interactions, whereas 1,1,2,2-tetrafluoroethyl 2,2,2-trifluoroethyl ether (TFETFE) enters only at extremely high diluent concentrations. The ionic conductivity increases with decreasing diluent concentrations, with a slope change during cluster percolation. Overall, TFETFE demonstrates higher effectiveness than TFPTFA, forming higher local salt concentration clusters and resulting in higher ionic conductivity.

Recent Advances for Improving the Accuracy, Transferability, and Efficiency of Reactive Force Fields.

Reactive force fields provide an affordable model for simulating chemical reactions at a fraction of the cost of quantum mechanical approaches. However, classically accounting for chemical reactivity often comes at the expense of accuracy and transferability, while computational cost is still large relative to nonreactive force fields. In this Perspective, we summarize recent efforts for improving the performance of reactive force fields in these three areas with a focus on the ReaxFF theoretical model. To improve accuracy, we describe recent reformulations of charge equilibration schemes to overcome unphysical long-range charge transfer, new ReaxFF models that account for explicit electrons, and corrections for energy conservation issues of the ReaxFF model. To enhance transferability we also highlight new advances to include explicit treatment of electrons in the ReaxFF and hybrid nonreactive/reactive simulations that make it possible to model charge transfer, redox chemistry, and large systems such as reverse micelles within the framework of a reactive force field. To address the computational cost, we review recent work in extended Lagrangian schemes and matrix preconditioners for accelerating the charge equilibration method component of ReaxFF and improvements in its software performance in LAMMPS.

Stable metal anodes enabled by a labile organic molecule bonded to a reduced graphene oxide aerogel.

Metallic anodes (lithium, sodium, and zinc) are attractive for rechargeable battery technologies but are plagued by an unfavorable metal-electrolyte interface that leads to nonuniform metal deposition and an unstable solid-electrolyte interphase (SEI). Here we report the use of electrochemically labile molecules to regulate the electrochemical interface and guide even lithium deposition and a stable SEI. The molecule, benzenesulfonyl fluoride, was bonded to the surface of a reduced graphene oxide aerogel. During metal deposition, this labile molecule not only generates a metal-coordinating benzenesulfonate anion that guides homogeneous metal deposition but also contributes lithium fluoride to the SEI to improve Li surface passivation. Consequently, high-efficiency lithium deposition with a low nucleation overpotential was achieved at a high current density of 6.0 mA cm-2 A Li|LiCoO2 cell had a capacity retention of 85.3% after 400 cycles, and the cell also tolerated low-temperature (-10 °C) operation without additional capacity fading. This strategy was applied to sodium and zinc anodes as well.

Lithium-electrolyte solvation and reaction in the electrolyte of a lithium ion battery: A ReaxFF reactive force field study.

In the electrode/electrolyte interface of a typical lithium-ion battery, a solid electrolyte interphase layer is formed as a result of electrolyte decomposition during the initial charge/discharge cycles. Electron leakage from the anode to the electrolyte reduces the Li+-ion and makes it more reactive, resulting in decomposition of the organic electrolyte. To study the Li-electrolyte solvation, solvent exchange, and subsequent solvent decomposition reactions at the anode/electrolyte interface, we have extended the existing ReaxFF reactive force field parameter sets to organic electrolyte species, such as ethylene carbonate, ethyl methyl carbonate, vinylene carbonate, and LiPF6 salt. Density Functional Theory (DFT) data describing Li-associated initiation reactions for the organic electrolytes and binding energies of Li-electrolyte solvation structures were generated and added to the existing ReaxFF training data, and subsequently, we trained the ReaxFF parameters with the aim of finding the optimal reproduction of the DFT data. In order to discern the characteristics of the Li neutral and cation, we have introduced a second Li parameter set to describe the Li+-ion. ReaxFF is trained for Li-neutral and Li+-cation to have similar solvation energies, but unlike the neutral Li, Li+ will not induce reactivity in the organic electrolyte. Solvent decomposition reactions are presumed to happen once Li+-ions are reduced to Li-atoms, which can be simulated using a Monte Carlo type atom modification within ReaxFF. This newly developed force field is capable of distinguishing between a Li-atom and a Li+-ion properly. Moreover, it is found that the solvent decomposition reaction barrier is a function of the number of ethylene carbonate molecules solvating the Li-atom.

In vivo hair growth-stimulating effect of medicinal plant extract on BALB/c nude mice.

CONTEXT: Chrysanthemum zawadskii var. latilobum (Asteraceae) (CZ) and Polygonum multiflorum Thunb. (Polygonaceae) (PM) have been used traditionally to treat different systemic diseases and acclaimed for various biological activities including hair growth. OBJECTIVE: This study investigates the hair restoration efficacy of selected medicinal plant extracts on nude mice. MATERIALS AND METHODS: Nude mice genetically predisposed to pattern balding were used in this study. Topical methanol extracts of CZ and PM (10 mg/mouse/d) with standardized vehicle formulation, only vehicle (propylene glycol:ethanol:dimethyl sulfoxide, 67:30:3% v/v) and Minoxidil (2%) were applied daily for 40 consecutive days. RESULTS: In our study, the maximum hair score (2.5 ± 0.29) was obtained in the CZ-treated group. Histological observation revealed a significant increase (p < 0.001) in the number of hair follicles (HF) in CZ-treated mice (58.66 ± 3.72) and Minoxidil-treated mice (40 ± 2.71). Subsequently, immunohistochemical analysis also confirmed the follicular keratinocyte proliferation by detection of BrdU-labeling, S-phase cells in Minoxidil and CZ-treated mouse follicular bulb and outer root sheaths. CONCLUSION: Our study revealed the underlying mechanism of stimulating hair growth in athymic nude mice by repair the nu/nu follicular keratin differentiation defect. Thus, the topical application of CZ may represent a novel strategy for the management and therapy of certain forms of alopecia.

Comparative hair restorer efficacy of medicinal herb on nude (Foxn1nu) mice.

Eclipta alba (L.) Hassk, Asiasarum sieboldii (Miq.) F. Maek (Asiasari radix), and Panax ginseng C. A. Mey (red ginseng) are traditionally acclaimed for therapeutic properties of various human ailments. Synergistic effect of each standardized plant extract was investigated for hair growth potential on nude mice, as these mutant mice genetically lack hair due to abnormal keratinization. Dried plant samples were ground and extracted by methanol. Topical application was performed on the back of nude mice daily up to completion of two hair growth generations. The hair density and length of Eclipta alba treated mice were increased significantly (P>0.001) than control mice. Hair growth area was also distinctly visible in Eclipta alba treated mice. On the other hand, Asiasari radix and Panax ginseng treated mice developing hair loss were recognized from the abortive boundaries of hair coverage. Histomorphometric observation of nude mice skin samples revealed an increase in number of hair follicles (HFs). The presence of follicular keratinocytes was confirmed by BrdU labeling, S-phase cells in HFs. Therefore, Eclipta alba extract and/or phytochemicals strongly displayed incomparability of hair growth promotion activity than others. Thus, the standardized Eclipta alba extract can be used as an effective, alternative, and complementary treatment against hair loss.

Development of a high density integrated reference genetic linkage map for the multinational Brassica rapa Genome Sequencing Project.

We constructed a high-density Brassica rapa integrated linkage map by combining a reference genetic map of 78 doubled haploid lines derived from Chiifu-401-42 × Kenshin (CKDH) and a new map of 190 F2 lines derived from Chiifu-401-42 × rapid cycling B. rapa (CRF2). The integrated map contains 1017 markers and covers 1262.0 cM of the B. rapa genome, with an average interlocus distance of 1.24 cM. High similarity of marker order and position was observed among the linkage groups of the maps with few short-distance inversions. In total, 155 simple sequence repeat (SSR) markers, anchored to 102 new bacterial artificial chromosomes (BACs) and 146 intron polymorphic (IP) markers were mapped in the integrated map, which would be helpful to align the sequenced BACs in the ongoing multinational Brassica rapa Genome Sequencing Project (BrGSP). Further, comparison of the B. rapa consensus map with the 10 B. juncea A-genome linkage groups by using 98 common IP markers showed high-degree colinearity between the A-genome linkage groups, except for few markers showing inversion or translocation. Suggesting that chromosomes are highly conserved between these Brassica species, although they evolved independently after divergence. The sequence information coming out of BrGSP would be useful for B. juncea breeding. and the identified Arabidopsis chromosomal blocks and known quantitative trait loci (QTL) information of B. juncea could be applied to improve other Brassica crops including B. rapa.

Sequenced BAC anchored reference genetic map that reconciles the ten individual chromosomes of Brassica rapa.

BACKGROUND: In view of the immense value of Brassica rapa in the fields of agriculture and molecular biology, the multinational Brassica rapa Genome Sequencing Project (BrGSP) was launched in 2003 by five countries. The developing BrGSP has valuable resources for the community, including a reference genetic map and seed BAC sequences. Although the initial B. rapa linkage map served as a reference for the BrGSP, there was ambiguity in reconciling the linkage groups with the ten chromosomes of B. rapa. Consequently, the BrGSP assigned each of the linkage groups to the project members as chromosome substitutes for sequencing. RESULTS: We identified simple sequence repeat (SSR) motifs in the B. rapa genome with the sequences of seed BACs used for the BrGSP. By testing 749 amplicons containing SSR motifs, we identified polymorphisms that enabled the anchoring of 188 BACs onto the B. rapa reference linkage map consisting of 719 loci in the 10 linkage groups with an average distance of 1.6 cM between adjacent loci. The anchored BAC sequences enabled the identification of 30 blocks of conserved synteny, totaling 534.9 cM in length, between the genomes of B. rapa and Arabidopsis thaliana. Most of these were consistent with previously reported duplication and rearrangement events that differentiate these genomes. However, we were able to identify the collinear regions for seven additional previously uncharacterized sections of the A genome. Integration of the linkage map with the B. rapa cytogenetic map was accomplished by FISH with probes representing 20 BAC clones, along with probes for rDNA and centromeric repeat sequences. This integration enabled unambiguous alignment and orientation of the maps representing the 10 B. rapa chromosomes. CONCLUSION: We developed a second generation reference linkage map for B. rapa, which was aligned unambiguously to the B. rapa cytogenetic map. Furthermore, using our data, we confirmed and extended the comparative genome analysis between B. rapa and A. thaliana. This work will serve as a basis for integrating the genetic, physical, and chromosome maps of the BrGSP, as well as for studies on polyploidization, speciation, and genome duplication in the genus Brassica.

Synthesis, structure, and magnetic properties of dinuclear cobalt(II) complexes with a new phenol-based dinucleating ligand with four hydroxyethyl chelating arms.

A new end-off type acyclic ligand with four hydroxyethyl arms, 2,6-bis[bis(2-hydroxyethyl)aminomethyl]-4-methylphenol [H(bhmp)], formed dinuclear cobalt(II) complexes [Co(2)(bhmp)(OAc)(2)]BPh(4) (1) and [Co(2)(bhmp)(OBz)(2)]BPh(4) (2). The complex 1.2.5CH(3)CN (C(50)H(62.5)BCo(2)N(4.5)O(9)) crystallizes in the monoclinic space group C2/c with dimensions a = 25.424(5) A, b = 13.376(2) A, c = 29.913(6) A, beta = 105.930(3) degrees, and V = 9781(3) A(3) and with Z = 8. X-ray diffraction analysis revealed a mu-phenoxo-bis(mu-acetato)dicobalt(II) core structure containing two octahedral cobalt(II) ions. Electronic spectra were investigated for 1 and 2 in the range 400-1800 nm, and the data were typical for the octahedral high-spin cobalt(II) complexes. Magnetic susceptibility was measured for 1 and 2 over the temperature range 4.5-300 K, and the data were analyzed well using our theoretical method. The best fitting parameters were kappa = 0.77, lambda = -116 cm(-1), Delta = 572 cm(-1), and J = -0.44 cm(-1) for complex 1 and kappa = 0.96, lambda = -93 cm(-1), Delta = 616 cm(-1), and J = -0.33 cm(-1) for complex 2.