A surface-enhanced Raman study of N-methylquinolinium tricyanoquinodimethanide adsorbed on Ag nanospheres: Determination of molecular orientation and order.

Quinolinium tricyanoquinodimethanides are among the most promising molecules for electronic applications. Disorder can be detrimental to the desired electronic properties of a monolayer, and as such, a reliable method to characterize a monolayer without destroying or creating defects is paramount to determining potential applications. Here, the normal and surface-enhanced Raman scattering spectra of N-methylquinolinium tricyanoquinodimethanide (CH3Q-3CNQ) on silver coated nanosurfaces have been obtained and analyzed. Theoretical treatment of CH3Q-3CNQ was performed. Optimization and frequency search was conducted using the B3LYP functional with the 6-31G(d) basis set. A complete list of frequencies and assignments for the molecules are presented. The spectroscopic evidence points to the fact that a monolayer of CH3Q-3CNQ can be formed through the self-assembly process, and the SERS data indicate that the monolayer attaches to the silver surface through the nitrile groups.

Determination of molecular orientation and order of N-(6-mercaptoacetylhexyl)quinolinium tricyanoquinodimethanide adsorbed on Ag nanoparticles.

The surface-enhanced and tip-enhanced Raman scattering spectra of N-(6-Mercaptoacetylhexyl)quinolinium tricyanoquinodimethanides on silver coated nanosurfaces have been obtained, analyzed using Density Functional Theory Calculations, and a complete list of frequencies and assignments for the molecules are presented. The spectroscopic evidence points to the fact that monolayers of the molecule can be formed through the self-assembly process and the SERS data indicate that the monolayer attach to the silver surface through the nitrile groups. SERS spectroscopy was useful in determining the orientation of the monolayer as well as estimating its order. Deprotection the thiol group thereby terminating the tail of the molecule with a sulfur atom allowed for a selectively oriented monolayer to be formed which permanently bound the molecules to the surface preventing rearrangements. This orientation of AcSC6H12Q-3CNQ on silver a surface allowed the electron pairs of the nitrogen to be available for interaction with a second contact. Based on trigonometric tangent function calculations the tilt angle was calculated to be 38° for the protected molecule and 70° for the deprotected alkane thiol monolayer.

Small-molecule detection in thiol-yne nanocomposites via surface-enhanced Raman spectroscopy.

Surface-enhanced Raman spectroscopy (SERS) is generally performed on planar surfaces, which can be difficult to prepare and may limit the interaction of the sensing surface with targets in large volume samples. We propose that nanocomposite materials can be configured that both include SERS probes and provide a high surface area-to-volume format, i.e., fibers. Thiol-yne nanocomposite films and fibers were fabricated using exposure to long-wave ultraviolet light after the inclusion of gold nanoparticles (AuNPs) functionalized with thiophenol. A SERS response was observed that was proportional to the aggregation of the AuNPs within the polymers and the amount of thiophenol present. Overall, this proof-of-concept fabrication of SERS active polymers indicated that thiol-yne nanocomposites may be useful as durable film or fiber SERS probes. Properties of the nanocomposites were evaluated using various techniques including UV-vis spectroscopy, µ-Raman spectroscopy, dynamic mechanical analysis, differential scanning calorimetry, thermogravimetric analysis, and transmission electron microscopy.

2,3-Dichloro-5,8-dimeth-oxy-1,4-naphtho-quinone.

In the crystal structure of the title compound, C(12)H(8)Cl(2)O(4), mol-ecules crystallize in planes parallel to (-204) with an inter-planar distance of 3.288 (2) Š[centroid-centroid distance = 3.819 (2) and slippage = 1.932 (2) Å]. The structure features C-H⋯O inter-actions involving meth-oxy and aromatic H atoms and the carbonyl O atoms as well as a C-H⋯Cl inter-action involving an aromatic H atom. In addition there are short inter-halogen contacts between adjoining mol-ecules [Cl⋯Cl = 3.3709 (5) Å].

Investigation of chemically modified barium titanate beads as surface-enhanced Raman scattering (SERS) active substrates for the detection of benzene thiol, 1,2-benzene dithiol, and rhodamine 6G.

SERS active surfaces were prepared by depositing silver films using Tollen's reaction on to barium titanate beads. The SERS activity of the resulting surfaces was probed using two thiols (benzene thiol and 1,2-benzene dithiol) and rhodamine 6G. The intensity of the SERS signal for the three analytes was investigated as a function of silver deposition time. The results indicate that the SERS intensity increased with increasing thickness of the silver film until a maximum signal intensity was achieved; additional silver deposition resulted in a decrease in the SERS intensity for all of the studied molecules. SEM measurement of the Ag coated barium titanate beads, as a function of silver deposition time, indicate that maximum SERS intensity corresponded with the formation of atomic scale islands of silver nanoparticles. Complete silver coverage of the beads resulted in a decreased SERS signal and the most intense SERS signals were observed at deposition times of 30 min for the thiols and 20 min for rhodamine 6G.

Plasmonic nanopillar arrays for large-area, high-enhancement surface-enhanced Raman scattering sensors.

Efforts to create reproducible surface-enhanced Raman scattering (SERS)-based chemical and biological sensors has been hindered by difficulties in fabricating large-area SERS-active substrates with a uniform, reproducible SERS response that still provides sufficient enhancement for easy detection. Here we report on periodic arrays of Au-capped, vertically aligned silicon nanopillars that are embedded in a Au plane upon a Si substrate. We illustrate that these arrays are ideal for use as SERS sensor templates, in that they provide large, uniform and reproducible average enhancement factors up to ∼1.2 × 10(8) over the structure surface area. We discuss the impact of the overall geometry of the structures upon the SERS response at 532, 633, and 785 nm incident laser wavelengths. Calculations of the electromagnetic field distributions and intensities within such structures were performed and both the wavelength dependence of the predicted SERS response and the field distribution within the nanopillar structure are discussed and support the experimental results we report.

Surface-enhanced Raman scattering of a Ag/oligo(phenyleneethynylene)/Ag sandwich.

α,ω-Dithiols are a useful class of compounds in molecular electronics because of their ability to easily adsorb to two metal surfaces, producing a molecular junction. We have prepared Ag nanosphere/oligo(phenyleneethynylene)/Ag sol (AgNS/OPE/Ag sol) and Ag nanowire/oligo(phenyleneethynylene)/Ag sol (AgNW/OPE/Ag sol) sandwiches to simulate the architecture of a molecular electronic device. This was achieved by self-assembly of OPE on the silver nanosurface, deprotection of the terminal sulfur, and deposition of Ag sol atop the monolayer. These sandwiches were then characterized by surface-enhanced Raman scattering (SERS) spectroscopy. The resulting spectra were compared to the bulk spectrum of the dimer and to the Ag nanosurface/OPE SERS spectra. The intensities of the SERS spectra in both systems exhibit a strong dependence on Ag deposition time and the results are also suggestive of intense interparticle coupling of the electromagnetic fields in both the AgNW/OPE/Ag and the AgNS/OPE/Ag systems. Three previously unobserved bands (1219, 1234, 2037 cm(-1)) arose in the SER spectra of the sandwiches and their presence is attributed to the strong enhancement of the electromagnetic field which is predicted from the COSMOL computational package. The 544 cm(-1) disulfide bond which is observed in the spectrum of solid OPE but is absent in the AgNS/OPE/Ag and AgNW/OPE/Ag spectra is indicative of chemisorption of OPE to the nanoparticles through oxidative dissociation of the disulfide bond.

Large-area plasmonic hot-spot arrays: sub-2 nm interparticle separations with plasma-enhanced atomic layer deposition of Ag on periodic arrays of Si nanopillars.

Initial reports of plasmonic 'hot-spots' enabled the detection of single molecules via surface-enhanced Raman scattering (SERS) from random distributions of plasmonic nanoparticles. Investigations of systems with near-field plasmonically coupled nanoparticles began, however, the ability to fabricate reproducible arrays of such particles has been lacking. We report on the fabrication of large-area, periodic arrays of plasmonic 'hot-spots' using Ag atomic layer deposition to overcoat Si nanopillar templates leading to reproducible interpillar gaps down to <2 nm. These plasmonic 'hot-spots' arrays exhibited over an order of magnitude increase in the SERS response in comparison to similar arrays with larger interpillar separations.

Bis(1,10-phenanthroline-5,6-dione-κN,N')silver(I) tetra-fluoridoborate.

In the structure of the title compound, [Ag(C(12)H(6)N(2)O(2))(2)]BF(4) or [AgL(2)]BF(4) (L = phendione), the Ag and B atoms are located on twofold rotation axes. The dihedral angle between the two phendione ligands is 36.7 (2)°. The coordination about the Ag(I) center is distorted tetra-hedral (τ(4) = 0.546). The crystal structure is consolidated by weak C-H⋯O(phendione) and C-H⋯F(BF(4) (-)) inter-actions. The BF(4) (-) counter-anion is strongly disordered and was modelled with two sets of idealized F atoms.

Seasonal variation of heavy metals in ambient air and precipitation at a single site in Washington, DC.

Atmospheric samples of precipitation and ambient air were collected at a single site in Washington, DC, for 7 months (for ambient air samples) and 1 year (for wet deposition samples) and analyzed for arsenic, cadmium, chromium and lead. The ranges of heavy metal concentrations for 6-day wet deposition samples collected over the 1-year period were 0.20-1.3 microg/l, 0.060-5.1 microg/l, 0.062-4.6 microg/l and 0.11-3.2 microg/l for arsenic, cadmium, chromium and lead, respectively, with a precision better than 5% for more than 95% of the measurements. The ranges of heavy metal concentrations for the 6-day ambient air samples were 0.800-15.7 ng/m(3), 1.50-30.0 ng/m(3), 16.8-112 ng/m(3), and 2.90-137 ng/m(3) for arsenic, cadmium, chromium and lead, respectively, with a precision better than 10%. The spread in the heavy metal concentration over the observation period suggests a high seasonal variability for heavy metal content in both ambient air and wet deposition samples.

Acetato(1,10-phenanthroline-5,6-dione)silver(I) trihydrate.

In the structure of the title compound, [Ag(C(2)H(3)O(2))(C(12)H(6)N(2)O(2))]·3H(2)O, the Ag(I) atom is coordinated by both 1,10-phenanthroline-5,6-dione N atoms and one O atom from the acetate anion. The three water mol-ecules are involved in extensive hydrogen bonding to each other and to the acetate O and 1,10-phenanthroline-5,6-dione O atoms. In addition, there are weak C-H⋯O inter-actions.

5,6-Di-oxo-1,10-phenanthrolin-1-ium trifluoro-methane-sulfonate.

In the structure of the title salt, C(12)H(7)N(2)O(2) (+)·CF(3)SO(3) (-), the cation participates in hydrogen bonding with the dione group of an adjacent cation as well as with the trifluoro-methane-sulfonate anion. In addition, there is an extensive network of C-H⋯O inter-actions between the cations and anions. There are two formula units per asymmetric unit. The crystal studied exhibits inversion twinning.

Vibrational assignment of the Raman active modes of 1,10-phenanthroline-5,6-dione using DFT calculations.

A complete assignment of the Raman active modes of 1,10-phenanthroline-5,6-dione in the 100-4000 cm(-1) spectral region is reported. Intense well resolved spectra of solid phendione with high S/N are reported. Assignment of the normal modes with appropriate symmetry representation symbols was achieved by employing density functional theory calculations. Our calculations were modeled on results previously reported for phenanthroline. Results of the B3LYP calculations were consistent and established that phendione possess sixty fundamentals.

Resonance Raman spectroscopy of oxoiron(IV) porphyrin pi-cation radical and oxoiron(IV) hemes in peroxidase intermediates.

The catalytic cycle intermediates of heme peroxidases, known as compounds I and II, have been of long standing interest as models for intermediates of heme proteins, such as the terminal oxidases and cytochrome P450 enzymes, and for non-heme iron enzymes as well. Reports of resonance Raman signals for compound I intermediates of the oxo-iron(IV) porphyrin pi-cation radical type have been sometimes contradictory due to complications arising from photolability, causing compound I signals to appear similar to those of compound II or other forms. However, studies of synthetic systems indicated that protein based compound I intermediates of the oxoiron(IV) porphyrin pi-cation radical type should exhibit vibrational signatures that are different from the non-radical forms. The compound I intermediates of horseradish peroxidase (HRP), and chloroperoxidase (CPO) from Caldariomyces fumago do in fact exhibit unique and characteristic vibrational spectra. The nature of the putative oxoiron(IV) bond in peroxidase intermediates has been under discussion in the recent literature, with suggestions that the Fe(IV)O unit might be better described as Fe(IV)-OH. The generally low Fe(IV)O stretching frequencies observed for proteins have been difficult to mimic in synthetic ferryl porphyrins via electron donation from trans axial ligands alone. Resonance Raman studies of iron-oxygen vibrations within protein species that are sensitive to pH, deuteration, and solvent oxygen exchange, indicate that hydrogen bonding to the oxoiron(IV) group within the protein environment contributes to substantial lowering of Fe(IV)O frequencies relative to those of synthetic model compounds.

Detection of benzopyrene-deoxyguanosine adducts by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry.

A method for the detection of BPDE-d guanosine adducts using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) is described and illustrated. The results indicate that MALDI is capable of detecting two other DNA benzopyrene adducts, which are trace products formed during the synthesis of BPDE-d guanosine. This MALDI-TOFMS method offers the potential for the detection of DNA adducts in human tissue using very limited sample purification and preparation.

Determination of the orientation of azathioprine adsorbed on a silver electrode by SERS and ab initio calculations.

We report the SERS spectrum of azthioprine (AZA) on a silver electrode surface and the results of normal mode calculations using empirical and ab initio calculations of the 6-mercaptopurione (6-MP) component of AZA. The empirical calculations were done with a Urey-Bradley force field (UBFF) and the ab initio calculations with the STO-3G basis set using the UHF, MP2 and BLYP methods. From the difference between the SERS and solid spectra, we determined that AZA attaches edge-on to the surface through the N3 site on the 6-MP component of the molecule. The UBFF calculation on an Ag adatom-molecule model reproduced most of the main observed frequency shifts in the SERS spectrum. With a similar model, the ab initio calculations yielded frequency shifts in the same direction as the one observed for the in-plane normal modes, but they yielded opposite shifts for the out-of-plane normal modes. This phenomenon may be attributed to a face-on interaction of the 6-MP component with a neighboring adatom made possible by an inclination of the molecule on the surface.