Influence of Interlayer Cation Ordering on Na Transport in P2-Type Na0.67-xLiy Ni0.33-zMn0.67+zO2 for Sodium-Ion Batteries.

P2-type Na2/3Ni1/3Mn2/3O2 (PNNMO) has been extensively studied because of its desirable electrochemical properties as a positive electrode for sodium-ion batteries. PNNMO exhibits intralayer transition-metal ordering of Ni and Mn and intralayer Na+/vacancy ordering. The Na+/vacancy ordering is often considered a major impediment to fast Na+ transport and can be affected by transition-metal ordering. We show by neutron/X-ray diffraction and density functional theory (DFT) calculations that Li doping (Na2/3Li0.05Ni1/3Mn2/3O2, LFN5) promotes ABC-type interplanar Ni/Mn ordering without disrupting the Na+/vacancy ordering and creates low-energy Li-Mn-coordinated diffusion pathways. A structure model is developed to quantitatively identify both the intralayer cation mixing and interlayer cationic stacking fault densities. Quasielastic neutron scattering reveals that the Na+ diffusivity in LFN5 is enhanced by an order of magnitude over PNNMO, increasing its capacity at a high current. Na2/3Ni1/4Mn3/4O2 (NM13) lacks Na+/vacancy ordering but has diffusivity comparable to that of LFN5. However, NM13 has the smallest capacity at a high current. The high site energy of Mn-Mn-coordinated Na compared to that of Ni-Mn and higher density of Mn-Mn-coordinated Na+ sites in NM13 disrupts the connectivity of low-energy Ni-Mn-coordinated diffusion pathways. These results suggest that the interlayer ordering can be tuned through the control of composition, which has an equal or greater impact on Na+ diffusion than the Na+/vacancy ordering.

Morphology and Crystallinity Effects of Nanochanneled Niobium Oxide Electrodes for Na-Ion Batteries.

Niobium pentoxide (Nb2O5) is a promising negative electrode for sodium ion batteries (SIBs). By engineering the morphology and crystallinity of nanochanneled niobium oxides (NCNOs), the kinetic behavior and charge storage mechanism of Nb2O5 electrodes were investigated. Amorphous and crystalline NCNO samples were made by modulating anodization conditions (20-40 V and 140-180 °C) to synthesize nanostructures of varying pore sizes and wall thicknesses with identical chemical composition. The electrochemical energy storage properties of the NCNOs were studied, with the amorphous samples showing better overall rate performance than the crystalline samples. The enhanced rate performance of the amorphous samples is attributed to the higher capacitive contributions and Na-ion diffusivity analyzed from cyclic voltammetry (CV) and the galvanostatic intermittent titration technique (GITT). It was found that the amorphous samples with smaller wall thicknesses facilitated improved kinetics. Among samples with similar pore size and wall thickness, the difference in their power performance stems from the crystallinity effect, which plays a more significant role in the resulting kinetics of the materials for Na-ion batteries.

Self-terminating, heterogeneous solid-electrolyte interphase enables reversible Li-ether cointercalation in graphite anodes.

Ether solvents are suitable for formulating solid-electrolyte interphase (SEI)-less ion-solvent cointercalation electrolytes in graphite for Na-ion and K-ion batteries. However, ether-based electrolytes have been historically perceived to cause exfoliation of graphite and cell failure in Li-ion batteries. In this study, we develop strategies to achieve reversible Li-solvent cointercalation in graphite through combining appropriate Li salts and ether solvents. Specifically, we design 1M LiBF4 1,2-dimethoxyethane (G1), which enables natural graphite to deliver ~91% initial Coulombic efficiency and >88% capacity retention after 400 cycles. We captured the spatial distribution of LiF at various length scales and quantified its heterogeneity. The electrolyte shows self-terminated reactivity on graphite edge planes and results in a grainy, fluorinated pseudo-SEI. The molecular origin of the pseudo-SEI is elucidated by ab initio molecular dynamics (AIMD) simulations. The operando synchrotron analyses further demonstrate the reversible and monotonous phase transformation of cointercalated graphite. Our findings demonstrate the feasibility of Li cointercalation chemistry in graphite for extreme-condition batteries. The work also paves the foundation for understanding and modulating the interphase generated by ether electrolytes in a broad range of electrodes and batteries.

Multifunctional Effect of Fe Substitution in Na Layered Cathode Materials for Enhanced Storage Stability.

Developing stable cathode materials that are resistant to storage degradation is essential for practical development and industrial processing of Na-ion batteries as many sodium layered oxide materials are susceptible to hygroscopicity and instability upon exposure to ambient air. Among the various layered compounds, Fe-substituted O3-type Na(Ni1/2Mn1/2)1-xFexO2 materials have emerged as a promising option for high-performance and low-cost cathodes. While previous reports have noted the decent air-storage stability of these materials, the role and origin of Fe substitution in improving storage stability remain unclear. In this study, we investigate the air-resistant effect of Fe substitution in O3-Na(Ni1/2Mn1/2)1-xFexO2 cathode materials by performing systematic surface and structural characterizations. We find that the improved storage stability can be attributed to the multifunctional effect of Fe substitution, which forms a surface protective layer containing an Fe-incorporated spinel phase and decreases the thermodynamical driving force for bulk chemical sodium extraction. With these mechanisms, Fe-containing cathodes can suppress the cascades of cathode degradation processes and better retain the electrochemical performance after air storage.

Operando study of mechanical integrity of high-volume expansion Li-ion battery anode materials coated by Al2O3.

Group IV elements and their oxides, such as Si, Ge, Sn and SiO have much higher theoretical capacity than commercial graphite anode. However, these materials undergo large volume change during cycling, resulting in severe structural degradation and capacity fading. Al2O3coating is considered an approach to improve the mechanical stability of high-capacity anode materials. To understand the effect of Al2O3coating directly, we monitored the morphology change of coated/uncoated Sn particles during cycling using operando focused ion beam-scanning electron microscopy. The results indicate that the Al2O3coating provides local protection and reduces crack formation at the early stage of volume expansion. The 3 nm Al2O3coating layer provides better protection than the 10 and 30 nm coating layer. Nevertheless, the Al2O3coating is unable to prevent the pulverization at the later stage of cycling because of large volume expansion.

Elucidating the Synergic Effect in Nanoscale MoS2 /TiO2 Heterointerface for Na-Ion Storage.

Interface engineering in electrode materials is an attractive strategy for enhancing charge storage, enabling fast kinetics, and improving cycling stability for energy storage systems. Nevertheless, the performance improvement is usually ambiguously ascribed to the "synergetic effect", the fundamental understanding toward the effect of the interface at molecular level in composite materials remains elusive. In this work, a well-defined nanoscale MoS2 /TiO2 interface is rationally designed by immobilizing TiO2 nanocrystals on MoS2 nanosheets. The role of heterostructure interface between TiO2 and MoS2 by operando synchrotron X-ray diffraction (sXRD), solid-state nuclear magnetic resonance, and density functional theory calculations is investigated. It is found that the existence of a hetero-interfacial electric field can promote charge transfer kinetics. Based on operando sXRD, it is revealed that the heterostructure follows a solid-solution reaction mechanism with small volume changes during cycling. As such, the electrode demonstrates ultrafast Na+ ions storage of 300 mAh g-1 at 10 A g-1 and excellent reversible capacity of 540 mAh g-1 at 0.2 A g-1 . This work provides significant insights into understanding of heterostructure interface at molecular level, which suggests new strategies for creating unconventional nanocomposite electrode materials for energy storage systems.

Electrochemically induced amorphous-to-rock-salt phase transformation in niobium oxide electrode for Li-ion batteries.

Intercalation-type metal oxides are promising negative electrode materials for safe rechargeable lithium-ion batteries due to the reduced risk of Li plating at low voltages. Nevertheless, their lower energy and power density along with cycling instability remain bottlenecks for their implementation, especially for fast-charging applications. Here, we report a nanostructured rock-salt Nb2O5 electrode formed through an amorphous-to-crystalline transformation during repeated electrochemical cycling with Li+. This electrode can reversibly cycle three lithiums per Nb2O5, corresponding to a capacity of 269 mAh g-1 at 20 mA g-1, and retains a capacity of 191 mAh g-1 at a high rate of 1 A g-1. It exhibits superb cycling stability with a capacity of 225 mAh g-1 at 200 mA g-1 for 400 cycles, and a Coulombic efficiency of 99.93%. We attribute the enhanced performance to the cubic rock-salt framework, which promotes low-energy migration paths. Our work suggests that inducing crystallization of amorphous nanomaterials through electrochemical cycling is a promising avenue for creating unconventional high-performance metal oxide electrode materials.

Spatial and Temporal Analysis of Sodium-Ion Batteries.

As a promising alternative to the market-leading lithium-ion batteries, low-cost sodium-ion batteries (SIBs) are attractive for applications such as large-scale electrical energy storage systems. The energy density, cycling life, and rate performance of SIBs are fundamentally dependent on dynamic physiochemical reactions, structural change, and morphological evolution. Therefore, it is essential to holistically understand SIBs reaction processes, degradation mechanisms, and thermal/mechanical behaviors in complex working environments. The recent developments of advanced in situ and operando characterization enable the establishment of the structure-processing-property-performance relationship in SIBs under operating conditions. This Review summarizes significant recent progress in SIBs exploiting in situ and operando techniques based on X-ray and electron analyses at different time and length scales. Through the combination of spectroscopy, imaging, and diffraction, local and global changes in SIBs can be elucidated for improving materials design. The fundamental principles and state-of-the-art capabilities of different techniques are presented, followed by elaborative discussions of major challenges and perspectives.

Deformation Mechanisms in a Rolled Magnesium Alloy Under Tension Along the Rolling Direction.

The twinning and slip modes of a rolled magnesium alloy sheet were investigated through quasi-in-situ tensile tests that were carried out along the rolling direction at room temperature with a constant strain rate. Scanning electron microscopy and electron backscattered diffraction observations were used to identify activated twinning and slip systems. Schmid factors were calculated to analyze different deformation modes. The analyses show that a small number of {10-12} tensile twins were present during deformation, and these twins resulted from the accommodation of compression along the tensile direction. Post-deformation examination revealed the dominance of prismatic slip.

Joint alignment of multispectral images via semidefinite programming.

In this paper, we introduce a novel feature-point-matching based framework for achieving an optimized joint-alignment of sequential images from multispectral imaging (MSI). It solves a low-rank and semidefinite matrix that stores all pairwise-image feature-mappings by minimizing the total amount of point-to-point matching cost via a convex optimization of a semidefinite programming formulation. This unique strategy takes a complete consideration of the information aggregated by all point-matching costs and enables the entire set of pairwise-image feature-mappings to be solved simultaneously and near-optimally. Our framework is capable of running in an automatic or interactive fashion, offering an effective tool for eliminating spatial misalignments introduced into sequential MSI images during the imaging process. Our experimental results obtained from a database of 28 sequences of MSI images of human eye demonstrate the superior performances of our approach to the state-of-the-art techniques. Our framework is potentially invaluable in a large variety of practical applications of MSI images.