Mid-anaphase arrest in S. cerevisiae cells eliminated for the function of Cin8 and dynein.

S. cerevisiae anaphase spindle elongation is accomplished by the overlapping function of dynein and the kinesin-5 motor proteins, Cin8 and Kip1. Cin8 and dynein are synthetically lethal, yet the arrest phenotypes of cells eliminated for their function had not been identified. We found that at a non-permissive temperature, dyn1 Delta cells that carry a temperature-sensitive cin8 - 3 mutation arrest at mid-anaphase with a unique phenotype, which we named TAN (two microtubule asters in one nucleus). These cells enter anaphase, but fail to proceed through the slow phase of anaphase B. At a permissive temperature, dyn1 Delta, cin8 - 3 or dyn1 Delta cin8 - 3 cells exhibit perturbed spindle midzone morphologies, with dyn1Delta cin8 - 3 anaphase spindles also being profoundly bent and nonrigid. Sorbitol, which has been suggested to stabilize microtubules, corrects these defects and suppresses the TAN phenotype. We conclude that dynein and Cin8 cooperate in anaphase midzone organization and influence microtubule dynamics, thus enabling progression through the slow phase of anaphase B.

Ubiquitin-free routes into the proteasome.

The majority of proteasome substrates identified to date are marked for degradation by polyubiquitinylation. Exceptions to this principle, however, are well documented and can help us understand the process proteasomes use to recognize their substrates. Examples include ornithine decarboxylase, p21/Cip1, TCRalpha, IkappaBalpha, c-Jun, calmodulin and thymidylate synthase. Degradation of these proteins can be completely ubiquitin-independent or coexist with ubiquitin-dependent pathways. Uncoupling degradation from ubiquitin modification may reflect the evolutionary conservation of mechanisms optimized for highly specialized regulatory functions.

Cell cycle-dependent degradation of the Saccharomyces cerevisiae spindle motor Cin8p requires APC(Cdh1) and a bipartite destruction sequence.

Saccharomyces cerevisiae Cin8p belongs to the BimC family of kinesin-related motor proteins that are essential for spindle assembly. Cin8p levels were found to oscillate in the cell cycle due in part to a high rate of degradation imposed from the end of mitosis through the G1 phase. Cin8p degradation required the anaphase-promoting complex ubiquitin ligase and its late mitosis regulator Cdh1p but not the early mitosis regulator Cdc20p. Cin8p lacks a functional destruction box sequence that is found in the majority of anaphase-promoting complex substrates. We carried out an extensive mutagenesis study to define the cis-acting sequence required for Cin8p degradation in vivo. The C terminus of Cin8p contains two elements required for its degradation: 1) a bipartite destruction sequence composed of a KEN-box plus essential residues within the downstream 22 amino acids and 2) a nuclear localization signal. The bipartite destruction sequence appears in other BimC kinesins as well. Expression of nondegradable Cin8p showed very mild phenotypic effects, with an increase in the fraction of mitotic cells with broken spindles.

A new view of the spindle checkpoint.

Previous studies of the spindle checkpoint suggested that its ability to prevent entry into anaphase was mediated by the inhibition of the anaphase-promoting complex (APC) ubiquitin ligase by Mad2. Two new studies challenge that view by demonstrating that another checkpoint protein, BubR1, is a far more potent inhibitor of APC function.

Cloning and expression of the S-adenosylmethionine decarboxylase gene of Neurospora crassa and processing of its product.

S-adenosylmethionine decarboxylase (AdoMetDC) catalyzes the formation of decarboxylated AdoMetDC, a precursor of the polyamines spermidine and spermine. The enzyme is derived from a proenzyme by autocatalytic cleavage. We report the cloning and regulation of the gene for AdoMetDC in Neurospora crassa, spe-2, and the effect of putrescine on enzyme maturation and activity. The gene was cloned from a genomic library by complementation of a spe-2 mutant. Like other AdoMetDCs, that of Neurospora is derived by cleavage of a proenzyme. The deduced sequence of the Neurospora proenzyme (503 codons) is over 100 codons longer than any other AdoMetDC sequence available in genomic databases. The additional amino acids are found only in the AdoMetDC of another fungus, Aspergillus nidulans, a cDNA for which we also sequenced. Despite the conserved processing site and four acidic residues required for putrescine stimulation of human proenzyme processing, putrescine has no effect on the rate (t0.5 approximately 10 min) of processing of the Neurospora gene product. However, putrescine is absolutely required for activity of the Neurospora enzyme (K0.5 approximately 100 microM). The abundance of spe-2 mRNA and enzyme activity is regulated 2- to 4-fold by spermidine.

Mitotic motors in Saccharomyces cerevisiae.

The budding yeast Saccharomyces cerevisiae provides a unique opportunity for study of the microtubule-based motor proteins that participate in mitotic spindle function. The genome of Saccharomyces encodes a relatively small and genetically tractable set of microtubule-based motor proteins. The single cytoplasmic dynein and five of the six kinesin-related proteins encoded have been implicated in mitotic spindle function. Each motor protein is unique in amino acid sequence. On account of functional overlap, no single motor is uniquely required for cell viability, however. The ability to create and analyze multiple mutants has allowed experimental dissection of the roles performed by each mitotic motor. Some of the motors operate within the nucleus to assemble and elongate the bipolar spindle (kinesin-related Cin8p, Kip1p, Kip3p and Kar3p). Others operate on the cytoplasmic microtubules to effect spindle and nuclear positioning within the cell (dynein and kinesin-related Kip2p, Kip3p and Kar3p). The six motors apparently contribute three fundamental activities to spindle function: motility, microtubule cross-linking and regulation of microtubule dynamics.

Polyamine regulation of ornithine decarboxylase synthesis in Neurospora crassa.

Ornithine decarboxylase (ODC) of the fungus Neurospora crassa, encoded by the spe-1 gene, catalyzes an initial and rate-limiting step in polyamine biosynthesis and is highly regulated by polyamines. In N. crassa, polyamines repress the synthesis and increase the degradation of ODC protein. Changes in the rate of ODC synthesis correlate with similar changes in the abundance of spe-1 mRNA. We identify two sequence elements, one in each of the 5' and 3' regions of the spe-1 gene of N. crassa, required for this polyamine-mediated regulation. A 5' polyamine-responsive region (5' PRR) comprises DNA sequences both in the upstream untranscribed region and in the long 5' untranslated region (5'-UTR) of the gene. The 5' PRR is sufficient to confer polyamine regulation to a downstream, heterologous coding region. Use of the beta-tubulin promoter to drive the expression of various portions of the spe-1 transcribed region revealed a 3' polyamine-responsive region (3' PRR) downstream of the coding region. Neither changes in cellular polyamine status nor deletion of sequences in the 5'-UTR alters the half-life of spe-1 mRNA. Sequences in the spe-1 5'-UTR also impede the translation of a heterologous coding region, and polyamine starvation partially relieves this impediment. The results show that N. crassa uses a unique combination of polyamine-mediated transcriptional and translational control mechanisms to regulate ODC synthesis.

Novel roles for saccharomyces cerevisiae mitotic spindle motors.

The single cytoplasmic dynein and five of the six kinesin-related proteins encoded by Saccharomyces cerevisiae participate in mitotic spindle function. Some of the motors operate within the nucleus to assemble and elongate the bipolar spindle. Others operate on the cytoplasmic microtubules to effect spindle and nuclear positioning within the cell. This study reveals that kinesin-related Kar3p and Kip3p are unique in that they perform roles both inside and outside the nucleus. Kar3p, like Kip3p, was found to be required for spindle positioning in the absence of dynein. The spindle positioning role of Kar3p is performed in concert with the Cik1p accessory factor, but not the homologous Vik1p. Kar3p and Kip3p were also found to overlap for a function essential for the structural integrity of the bipolar spindle. The cytoplasmic and nuclear roles of both these motors could be partially substituted for by the microtubule-destabilizing agent benomyl, suggesting that these motors perform an essential microtubule-destabilizing function. In addition, we found that yeast cell viability could be supported by as few as two microtubule-based motors: the BimC-type kinesin Cin8p, required for spindle structure, paired with either Kar3p or Kip3p, required for both spindle structure and positioning.

Altered dosage of the Saccharomyces cerevisiae spindle pole body duplication gene, NDC1, leads to aneuploidy and polyploidy.

Saccharomyces cerevisiae cells are exquisitely sensitive to altered dosage of the spindle pole body duplication gene, NDC1. We show that the NDC1 locus is haploinsufficient because diploid yeast cells cannot survive with a single chromosomal copy of the NDC1 gene. Diploid cells with a single copy of NDC1 can survive by gaining an extra copy of the NDC1-containing chromosome. NDC1 haploinsufficiency is a dominant loss-of-function phenotype that leads to aneuploidy. Furthermore, we report that overexpression of NDC1 leads to spindle pole body duplication defects indistinguishable from those observed in ndc1-1 mutant cells. Cells overexpressing NDC1 arrest with monopolar spindles and exhibit increase-in-ploidy phenotypes. Thus, both increased and decreased NDC1 dosage can lead to aneuploidy. The striking sensitivity of yeast cells to changes in NDC1 gene dosage suggests a model for the behavior of some tumor suppressor genes and oncogenes in which loss-of-function mutations and overexpression, respectively, lead to increased genetic instability.

Motile properties of the kinesin-related Cin8p spindle motor extracted from Saccharomyces cerevisiae cells.

We have developed microtubule binding and motility assays for Cin8p, a kinesin-related mitotic spindle motor protein from Saccharomyces cerevisiae. The methods examine Cin8p rapidly purified from crude yeast cell extracts. We created a recombinant form of CIN8 that fused the biotin carrying polypeptide from yeast pyruvate carboxylase to the carboxyl terminus of Cin8p. This form was biotinated in yeast cells and provided Cin8p activity in vivo. Avidin-coated glass surfaces were used to specifically bind biotinated Cin8p from crude extracts. Microtubules bound to the Cin8p-coated surfaces and moved at 3.4 +/- 0.5 micrometer/min in the presence of ATP. Force production by Cin8p was directed toward the plus ends of microtubules. A mutation affecting the microtubule-binding site within the motor domain (cin8-F467A) decreased Cin8p's ability to bind microtubules to the glass surface by >10-fold, but reduced gliding velocity by only 35%. The cin8-3 mutant form, affecting the alpha2 helix of the motor domain, caused a moderate defect in microtubule binding, but motility was severely affected. cin8-F467A cells, but not cin8-3 cells, were greatly impaired in bipolar spindle forming ability. We conclude that microtubule binding by Cin8p is more important than motility for proper spindle formation.

The yeast dynactin complex is involved in partitioning the mitotic spindle between mother and daughter cells during anaphase B.

Although vertebrate cytoplasmic dynein can move to the minus ends of microtubules in vitro, its ability to translocate purified vesicles on microtubules depends on the presence of an accessory complex known as dynactin. We have cloned and characterized a novel gene, NIP100, which encodes the yeast homologue of the vertebrate dynactin complex protein p150(glued). Like strains lacking the cytoplasmic dynein heavy chain Dyn1p or the centractin homologue Act5p, nip100Delta strains are viable but undergo a significant number of failed mitoses in which the mitotic spindle does not properly partition into the daughter cell. Analysis of spindle dynamics by time-lapse digital microscopy indicates that the precise role of Nip100p during anaphase is to promote the translocation of the partially elongated mitotic spindle through the bud neck. Consistent with the presence of a true dynactin complex in yeast, Nip100p exists in a stable complex with Act5p as well as Jnm1p, another protein required for proper spindle partitioning during anaphase. Moreover, genetic depletion experiments indicate that the binding of Nip100p to Act5p is dependent on the presence of Jnm1p. Finally, we find that a fusion of Nip100p to the green fluorescent protein localizes to the spindle poles throughout the cell cycle. Taken together, these results suggest that the yeast dynactin complex and cytoplasmic dynein together define a physiological pathway that is responsible for spindle translocation late in anaphase.

Bub1p kinase activates the Saccharomyces cerevisiae spindle assembly checkpoint.

Saccharomyces cerevisiae BUB1 encodes a protein kinase required for spindle assembly checkpoint function. In the presence of spindle damage, BUB1 is required to prevent cell cycle progression into anaphase. We have identified a dominantly acting BUB1 allele that appears to activate the spindle assembly checkpoint pathway in cells with undamaged spindles. High-level expression of BUB1-5 did not cause detectable spindle damage, yet it delayed yeast cells in mitosis at a stage following bipolar spindle assembly but prior to anaphase spindle elongation. Delayed cells possessed a G2 DNA content and elevated Clb2p mitotic cyclin levels. Unlike cells delayed in mitosis by spindle damage or MPS1 kinase overexpression, hyperphosphorylated forms of the Mad1p checkpoint protein did not accumulate. Similar to cells overexpressing MPS1, the BUB1-5 delay was dependent upon the functions of the other checkpoint genes, including BUB2 and BUB3 and MAD1, MAD2, and MAD3. We found that the mitotic delay caused by BUB1-5 or MPS1 overexpression was interdependent upon the function of the other. This suggests that the Bub1p and Mps1p kinases act together at an early step in generating the spindle damage signal.

Dominant alleles of Saccharomyces cerevisiae CDC20 reveal its role in promoting anaphase.

We identified an allele of Saccharomyces cerevisiae CDC20 that exhibits a spindle-assembly checkpoint defect. Previous studies indicated that loss of CDC20 function caused cell cycle arrest prior to the onset of anaphase. In contrast, CDC20-50 caused inappropriate cell cycle progression through M phase in the absence of mitotic spindle function. This effect of CDC20-50 was dominant over wild type and was eliminated by a second mutation causing loss of function, suggesting that it encodes an overactive form of Cdc20p. Overexpression of CDC20 was found to cause a similar checkpoint defect, causing bypass of the preanaphase arrest produced by either microtubule-depolymerizing compounds or MPS1 overexpression. CDC20 overexpression was also able to overcome the anaphase delay caused by high levels of the anaphase inhibitor Pds1p, but not a mutant form immune to anaphase-promoting complex- (APC-)mediated proteolysis. CDC20 overexpression was unable to promote anaphase in cells deficient in APC function. These findings suggest that Cdc20p is a limiting factor that promotes anaphase entry by antagonizing Pds1p. Cdc20p may promote the APC-dependent proteolytic degradation of Pds1p and other factors that act to inhibit cell cycle progression through mitosis.

Mitotic spindle positioning in Saccharomyces cerevisiae is accomplished by antagonistically acting microtubule motor proteins.

Proper positioning of the mitotic spindle is often essential for cell division and differentiation processes. The asymmetric cell division characteristic of budding yeast, Saccharomyces cerevisiae, requires that the spindle be positioned at the mother-bud neck and oriented along the mother-bud axis. The single dynein motor encoded by the S. cerevisiae genome performs an important but nonessential spindle-positioning role. We demonstrate that kinesin-related Kip3p makes a major contribution to spindle positioning in the absence of dynein. The elimination of Kip3p function in dyn1Delta cells severely compromised spindle movement to the mother-bud neck. In dyn1Delta cells that had completed positioning, elimination of Kip3p function caused spindles to mislocalize to distal positions in mother cell bodies. We also demonstrate that the spindle-positioning defects exhibited by dyn1 kip3 cells are caused, to a large extent, by the actions of kinesin- related Kip2p. Microtubules in kip2Delta cells were shorter and more sensitive to benomyl than wild-type, in contrast to the longer and benomyl-resistant microtubules found in dyn1Delta and kip3Delta cells. Most significantly, the deletion of KIP2 greatly suppressed the spindle localization defect and slow growth exhibited by dyn1 kip3 cells. Likewise, induced expression of KIP2 caused spindles to mislocalize in cells deficient for dynein and Kip3p. Our findings indicate that Kip2p participates in normal spindle positioning but antagonizes a positioning mechanism acting in dyn1 kip3 cells. The observation that deletion of KIP2 could also suppress the inviability of dyn1Delta kar3Delta cells suggests that kinesin-related Kar3p also contributes to spindle positioning.

Saccharomyces cerevisiae PAC2 functions with CIN1, 2 and 4 in a pathway leading to normal microtubule stability.

The products of the Saccharomyces cerevisiae CIN1, CIN2 and CIN4 genes participate in a nonessential pathway required for normal microtubule function. In this article, we demonstrate that the product of PAC2 also functions in this pathway. PAC2 deletion mutants displayed phenotypes and genetic interactions similar to those caused by cin1 delta, cin2 delta and cin4 delta. These include cold-sensitive microtubule structures and sensitivity to the microtubule depolymerizing agent benomyl. Involvement in a common functional pathway is indicated by the observation that all double mutant recombinations are viable and no more affected than any single mutant. In addition, extra copies of CIN1 were found to suppress the benomyl sensitivity of pac2 delta, cin2 delta and cin4 delta, but not that caused by other mutations that affect microtubule function. Cin1p and Pac2p were found to be related in sequence to mammalian proteins that aid in the folding of beta-tubulin into an assembly-competent state. Alleles of CIN1 were identified that could suppress the benomyl sensitivity of cin4-4 in a highly specific fashion. Our findings suggest that the guanine nucleotide-binding Cin4p interacts with Cin1p and regulates its tubulin folding activity.

Mitotic spindle function in Saccharomyces cerevisiae requires a balance between different types of kinesin-related motors.

Two Saccharomyces cerevisiae kinesin-related motors, Cin8p and Kip1p, perform an essential role in the separation of spindle poles during spindle assembly and a major role in spindle elongation. Cin8p and Kip1p are also required to prevent an inward spindle collapse prior to anaphase. A third kinesin-related motor, Kar3p, may act antagonistically to Cin8p and Kip1p since loss of Kar3p partially suppresses the spindle collapse in cin8 kip1 mutants. We have tested the relationship between Cin8p and Kar3p by overexpressing both motors using the inducible GAL1 promoter. Overexpression of KAR3 results in a shrinkage of spindle size and a temperature-dependent inhibition of the growth of wild-type cells. Excess Kar3p has a stronger inhibitory effect on the growth of cin8 kip1 mutants and can completely block anaphase spindle elongation in these cells. In contrast, overexpression of CIN8 leads to premature spindle elongation in all cells tested. This is the first direct demonstration of antagonistic motors acting on the intact spindle and suggests that spindle length is determined by the relative activity of Kar3p-like and Cin8p/Kip1p-like motors.

Saccharomyces cerevisiae genes required in the absence of the CIN8-encoded spindle motor act in functionally diverse mitotic pathways.

Kinesin-related Cin8p is the most important spindle-pole-separating motor in Saccharomyces cerevisiae but is not essential for cell viability. We identified 20 genes whose products are specifically required by cell deficient for Cin8p. All are associated with mitotic roles and represent at least four different functional pathways. These include genes whose products act in two spindle motor pathways that overlap in function with Cin8p, the kinesin-related Kip1p pathway and the cytoplasmic dynein pathway. In addition, genes required for mitotic spindle checkpoint function and for normal microtubule stability were recovered. Mutant alleles of eight genes caused phenotypes similar to dyn1 (encodes the dynein heavy chain), including a spindle-positioning defect. We provide evidence that the products of these genes function in concept with dynein. Among the dynein pathway gene products, we found homologues of the cytoplasmic dynein intermediate chain, the p150Glued subunit of the dynactin complex, and human LIS-1, required for normal brain development. These findings illustrate the complex cellular interactions exhibited by Cin8p, a member of a conserved spindle motor family.