ALD Deposited ZnO:Al Films on Mica for Flexible PDLC Devices.

In this work, highly conductive Al-doped ZnO (AZO) films are deposited on transparent and flexible muscovite mica substrates by using the atomic layer deposition (ALD) technique. AZO-mica structures possess high optical transmittance at visible and near-infrared spectral range and retain low electric resistivity, even after continuous bending of up to 800 cycles. Structure performances after bending tests have been supported by atomic force microscopy (AFM) analysis. Based on performed optical and electrical characterizations AZO films on mica are implemented as transparent conductive electrodes in flexible polymer dispersed liquid crystal (PDLC) devices. The measured electro-optical characteristics and response time of the proposed devices reveal the higher potential of AZO-mica for future ITO-free flexible optoelectronic applications.

Flexible light valves using polymer-dispersed liquid crystals and TiO2/Ag/TiO2 multilayers.

The era of flexible optoelectronics demands development of wearable and bendable structures, foldable touch screens, paper-like displays, and curved and flexible solid-state lighting devices. Here, we demonstrate the fabrication of highly flexible light valves using polymer-dispersed liquid crystal (PDLC) and TiO2/Ag/TiO2 transparent conductive films. TiO2/Ag/TiO2 multilayers were prepared by magnetron sputtering technique on polyethylene terephthalate (PET) substrates at room temperature. By keeping the equivalent TiO2 layers and varying the deposition time of the Ag layer, proper metal nanograins on TiO2 planar plane were formed, providing the best tradeoff between the transmittance, sheet resistance and bending ability. The results are validated by numerical simulations that suggest the best match between the deposition time and individual layer thickness. Based on the performed characteristics of TiO2/Ag/TiO2/PET structures, several flexible light valves are fabricated and characterized. The sheet resistance values of TiO2/Ag/TiO2/PET remain unchanged over 1000 bending cycles. The measured driving voltage and response time values open great potential of TiO2/Ag/TiO2/PET for integration into next-generation ITO-free flexible and stretchable devices.

Prism-hologram-prism sandwiched recording method for polarization-selective substrate-mode volume holograms with a large diffraction angle.

We propose a prism-hologram-prism sandwiched recording method for the fabrication of polarization-selective substrate-mode volume holograms with a large diffraction angle. In fabrication, the C-RT20 photopolymer is sandwiched between two 45°-90°-45° prisms and the interference fringes can be easily recorded in the recording material. The experimental results are in good agreement with the theoretical predictions. The proposed method features of a reflection-type recording setup for a transmission element and belongs to a technique of longer-wavelength construction for shorter-wavelength reconstruction. In addition, the method is much easier than the traditional recording method of two incident beam interference and has application potential in holographic photonics.

Developing a microspectrophotometer to measure the dependence of broadband refractive indices on Ge-doped concentrations in GRIN rods.

A confocal microspectrophotometer is utilized to scan the surface reflectivities of a polished gradient-index (GRIN) rod in the range of 400 to 900 nm. The pure fused silica is used to be a reference standard for deducing the absolute reflectivities of the Ge-doped core. Then, multi-wavelength refractive index profiles of the Ge-doped core can be further determined based on the Fresnel equation. Moreover, this work shows a connection between the material dispersion of the GRIN rod and the Ge-doped concentrations measured by an energy dispersive spectrometer. Finally, the dependence of the refractive index of the Ge-doped core on the doping concentrations at a certain wavelength can be easily expressed as a linear form.

Exploiting the image of the surface reflectivity to measure refractive index profiling for various optical fibers.

A direct image method of surface reflectivities on a cleaved fiber end with a filtered halogen lamp and a TE-cooled CCD with high dynamic range is proposed to measure the multi-wavelength refractive index profiling (RIP). A polished black glass is used to be a reference standard for measuring the absolute reflectivity of the fiber end. With the developed calibration procedures, both the spatially dependent sensitivity and spectral responsivity of the CCD pixels can be eliminated to achieve the high spatial accuracy. Tested fiber is connected with a fiber terminator to prevent errors from the backside return light. With the present method, the RIP can be precisely measured for not only multi-mode fibers but also single-mode fibers.

Volume polarization holographic recording in thick photopolymer for optical memory.

Based on a vector wave theory of volume holograms, dependence of holographic reconstruction on the polarization states of the writing and reading beams is discussed. It is found that under paraxial approximation the circular polarization holograms provide a better distinction of the reading beams. Characteristics of recording polarization holograms in thick phenanthrenequinone-doped poly(methyl methacrylate) (PQ/PMMA) photopolymer are experimentally investigated. It is found that the circular polarization holographic recording possesses better dynamic range and material sensitivity, and a uniform spatial frequency response over a wide range. The performance is comparable to that of the intensity holographic recording in PQ/PMMA. Based on theoretical analyses and the material properties, a polarization multiplexing holographic memory using circularly polarization recording configuration for increasing storage capacity has been designed and experimentally demonstrated.

Near-infrared sensitive photorefractive device using polymer dispersed liquid crystal and BSO:Ru hybrid structure.

A near-infrared sensitive hybrid device, based on a Ru-doped BSO photorefractive substrate and polymer dispersed liquid crystal (PDLC) layer, is reported. It is found that the photoexcited charge carriers generated in the BSO:Ru substrate create an optically induced space charge field, sufficient to penetrate into the PDLC layer and to re-orient the LC molecules inside the droplets. Beam-coupling measurements at the Bragg regime are performed showing prospective amplification values and high spatial resolution. The proposed structure does not require indium tin oxide (ITO) contacts and alignment layers. Such a device allows all the processes to be controlled by light, thus opening further potential for real-time image processing at the near-infrared range.

Near-infrared properties of Rh-doped Bi12TiO20 crystals for photonic applications.

The effect of Rh doping in Bi(12)TiO(20) (BTO) crystals on the photosensitivity and recording speed at 1064 nm is reported. Response time of 0.1 s is measured during real-time holographic recording without any preliminary treatments. Once the crystal is pre-excited with a green light, the detected response time becomes 0.02 s. A possibility to implement BTO:Rh crystal plate with liquid crystals into a hybrid organic/inorganic device is demonstrated, which opens perspectives for further near-infrared applications.

Quasi-nonvolatile storage in Ru-doped Bi12SiO20 crystals by two-wavelength holography.

Prolonged read-out process of a hologram recorded at near infrared with simultaneous green light exposure is measured in Ru-doped Bi12SiO20 crystal. The experimental results are confirmed by numerical simulations, suggesting two different traps involved in the space-charge transport mechanism. In addition, quasi-permanent holographic recording of image with fast updating speed by using two-wavelength recording is demonstrated.

Real-time holography in ruthenium-doped bismuth sillenite crystals at 1064 nm.

Real-time holographic recording and an improvement of the response time in ruthenium (Ru)-doped Bi(12)SiO(20) (BSO) crystal at 1064 nm is obtained. Using green light pre-exposure, a significant operation speed of 60 ms is achieved. In addition, the ability for image reconstruction is demonstrated in Ru-doped BSO, supporting further applications as reversible media for real-time image processing at the near-IR spectral range.