RESUMO
The effects of hydration on two types of structural rearrangements, physical aging and crystallization, of poly(lactic acid) (PLA) have been characterized. Although the water absorbed is extremely small, on the order of 0.5% by weight, we found a significant increase in both the magnitude and kinetics of enthalpic relaxation near the glass transition temperature (Tg). The kinetics of aging is at least 2 times the speed as compared to dry samples. In addition, we also found that the crystallization kinetics can be increased significantly when PLA is hydrated. The initial rate of crystallization at 80 °C is extremely fast at 7 J/g/min for the hydrated state as compared to 2 J/g/min under dry conditions. However, the ultimate degree of crystallinity achieved is not different for the two types of samples. Both of these structural rearrangements in the hydrated state can be explained by an increase in segmental mobility. The fact that water has such a strong effect on PLA structure is attributed to the strong intermolecular interactions present and their changes in the hydrated state. Spectroscopic features associated with bound water or free water were found for PLA with different hydration levels. The increase in the segmental mobility was directly correlated to the presence of free liquid water disrupting the intermolecular interactions in PLA.
Assuntos
Ácido Láctico/análise , Polímeros/análise , Água/química , Cinética , Estrutura Molecular , PoliésteresRESUMO
The effect of the surface charge of nucleation agents on the crystallization behavior of poly(vinylidene fluoride) (PVDF) has been investigated. Ion-dipole interaction between the positive surface of nucleation agents and the partially negative CF(2) dipoles of PVDF is established as a main factor for further lowering the free energy barrier for nucleation, and thus increasing significantly the crystallization kinetics. This is in contrast to the behavior observed for nucleation agents possessing either negative surface or neutral charges. Positive nucleation agents led to a remarkable increase in the crystallization temperature of PVDF (lower supercooling) as compared with that of neat PVDF. The dispersion of each type of nucleation agent is also important. The melting temperatures of nucleation agents need to be higher than the melting temperature of PVDF. The melting point and degree of crystallinity of PVDF can also be raised by using specific nucleation agents. The detailed crystallization kinetics and conformational changes of the PVDF chain have been investigated. With the addition of positive nucleation agents, the γ and ß chain conformations, instead of the α phase, dominate.
RESUMO
Fast dynamics within the microwave frequency range (approximately gigahertz) in polymer systems as a function of temperature (in the range from 20 to 190 degrees C) were studied using high frequency dielectric spectroscopy. The frequency of radiation was varied from 0.5 to 18 GHz. The isochronal dielectric loss data were taken to eliminate the complexity arising from the frequency-independent, temperature-dependent background loss in the condensed phase. These studies were conducted for poly(caprolactone) (PCL), poly(ethylene oxide) (PEO), poly(ethylene oxide) with methoxy end group (PEO-CH3), PLA-b-PEO-b-PLA triblock copolymers, and several polymers with high glass transition temperatures. These polymers possess glass temperatures ranging from -62 degrees C (PCL) to 110 degrees C (PMMA). One broad relaxation process was found only for polymers (PCL, PEO, and PLA-b-PEO-b-PLA) with low glass transition temperatures. The effect due to end groups was investigated by comparing the results of PEO with hydroxy versus methoxy end groups. The measured relaxation process was determined not to be associated with end groups. The results from temperature-dependent dielectric spectroscopy indicate that the relaxation process follows an Arrhenius T dependence suggesting that it is due to local motions. The activation energy of the relaxation process was measured and investigated based on the coupling model. The results suggest that the observed relaxation process behaves as a Johari-Goldstein beta relaxation.
RESUMO
Multilayer thin film coatings were prepared on silicon substrates. Poly(vinyl alcohol) was adsorbed from aqueous solution to propyldimethylsilyl-modified silicon wafers. This thin semicrystalline coating was chemically modified using acid chlorides to form thicker, hydrophobic coatings. The products of the modification reactions allowed adsorption of a subsequent layer of poly(vinyl alcohol) that could subsequently be hydrophobized. This two-step process (adsorption/chemical modification) allows layer-by-layer deposition to prepare coatings with thickness, chemical structure, and wettability control.
RESUMO
The influence of copolymer configuration on the phase behavior of various ternary polymer blends containing a crystallizable polyester, a noncrystallizable polyether, and an acrylic random copolymer of different chain configuration was investigated. In these ternary blends, the acrylic random copolymer is typically added to control rheological properties at elevated temperatures. In fact, the acrylic random copolymers composed of various compositions of MMA and nBMA were found to have different miscibility with polyester as well as polyether, leading to substantially different phase behavior of ternary blends. Remarkable temperature dependence was also found. The mean-field Flory-Huggins theory for the free energy of mixing, extended to ternary polymer blends, was adopted for predicting phase diagrams where the exact spinodal and binodal boundaries could be calculated. Phase diagrams of ternary blends, predicted by the Flory-Huggins formulations and related calculations, were in good agreement with experimental phase diagrams. The differences observed in the rheological processes of various ternary blends with different acrylic copolymers were directly related to changes in miscibility, associated phase behavior, and chain configuration.