Effect of Carbon Layer Thickness on the Electrocatalytic Oxidation of Glucose in a Ni/BDD Composite Electrode.

High-performance non-enzymatic glucose sensor composite electrodes were prepared by loading Ni onto a boron-doped diamond (BDD) film surface through a thermal catalytic etching method. A carbon precipitate with a desired thickness could be formed on the Ni/BDD composite electrode surface by tuning the processing conditions. A systematic study regarding the influence of the precipitated carbon layer thickness on the electrocatalytic oxidation of glucose was conducted. While an oxygen plasma was used to etch the precipitated carbon, Ni/BDD-based composite electrodes with the precipitated carbon layers of different thicknesses could be obtained by controlling the oxygen plasma power. These Ni/BDD electrodes were characterized by SEM microscopies, Raman and XPS spectroscopies, and electrochemical tests. The results showed that the carbon layer thickness exerted a significant impact on the resulting electrocatalytic performance. The electrode etched under 200 W power exhibited the best performance, followed by the untreated electrode and the electrode etched under 400 W power with the worst performance. Specifically, the electrode etched under 200 W was demonstrated to possess the highest sensitivity of 1443.75 µA cm-2 mM-1 and the lowest detection limit of 0.5 µM.

Large-Scale and Highly Efficient Production of Ultrafine PVA Fibers by Electro-Centrifugal Spinning for NH3 Adsorption.

Ultrafine Polyvinyl alcohol (PVA) fibers have an outstanding potential in various applications, especially in absorbing fields. In this manuscript, an electrostatic-field-assisted centrifugal spinning system was designed to improve the production efficiency of ultrafine PVA fibers from PVA aqueous solution for NH3 adsorption. It was established that the fiber production efficiency using this self-designed system could be about 1000 times higher over traditional electrospinning system. The produced PVA fibers establish high morphology homogeneity. The impact of processing variables of the constructed spinning system including rotation speed, needle size, liquid feeding rate, and voltage on fiber morphology and diameter was systematically investigated by SEM studies. To acquire homogeneous ultrafine PVA fiber membranes, the orthogonal experiment was also conducted to optimize the spinning process parameters. The impact weight of different studied parameters on the spinning performance was thus provided. The experimental results showed that the morphology of micro/nano-fibers can be well controlled by adjusting the spinning process parameters. Ultrafine PVA fibers with the diameter of 2.55 µm were successfully obtained applying the parameters, including rotation speed (6500 rpm), needle size (0.51 mm), feeding rate (3000 mL h-1), and voltage (20 kV). Furthermore, the obtained ultrafine PVA fiber mat was demonstrated to be capable of selectively adsorbing NH3 gas relative to CO2, thus making it promising for NH3 storage and other environmental purification applications.

Thickness Effects on Boron Doping and Electrochemical Properties of Boron-Doped Diamond Film.

As a significant parameter in tuning the structure and performance of the boron-doped diamond (BDD), the thickness was focused on the mediation of the boron doping level and electrochemical properties. BDD films with different thicknesses were deposited on silicon wafers by the hot filament chemical vapor deposition (HFCVD) method. The surface morphology and composition of the BDD films were characterized by SEM and Raman, respectively. It was found that an increase in the BDD film thickness resulted in larger grain size, a reduced grain boundary, and a higher boron doping level. The electrochemical performance of the electrode equipped with the BDD film was characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) in potassium ferricyanide. The results revealed that the thicker films exhibited a smaller peak potential difference, a lower charge transfer resistance, and a higher electron transfer rate. It was believed that the BDD film thickness-driven improvements of boron doping and electrochemical properties were mainly due to the columnar growth mode of CVD polycrystalline diamond film, which led to larger grain size and a lower grain boundary density with increasing film thickness.

Mussel-Inspired Surface Modification of α-Zirconium Phosphate Nanosheets for Anchoring Efficient and Reusable Ultrasmall Au Nanocatalysts.

The shortage of powerful functionalities on scalable α-zirconium phosphate (ZrP) materials blocks the facile preparation of highly dispersed and immobilized metal nanocatalysts. We herein present a mild and facile mussel-inspired strategy based on polydopamine (PDA) for the surface modification of ZrP, and hence, the generation of powerful functionalities at a high density for the straightforward reduction of chloroauric acid to Au nanoparticles (AuNPs) and the immobilization of AuNPs. The resulting ternary ZrP@PDA/Au exhibited ultra-small AuNPs with a particle size of around 6.5 nm, as estimated based on TEM images. Consequently, the ZrP@PDA/Au catalyst showed significant activity in the catalytic conversion of 4-nitrophenol (4NP) to 4-aminophenol (4AP), a critical transformation reaction in turning the hazard into valuable intermediates for drug synthesis. The PDA was demonstrated to play a critical role in the fabrication of the highly efficient ZrP@PDA/Au catalyst, far outperforming the ZrP/Au counterpart. The turnover frequency (TOF) achieved by the ZrP@PDA/Au reached as high as 38.10 min-1, much higher than some reported noble metal-based catalysts. In addition, the ZrP@PDA/Au showed high stability and reusability, of which the catalytic efficiency was not significantly degraded after prolonged storage in solution.

A hierarchical system of covalent and dual non-covalent crosslinks promotes the toughness and self-healing properties of polymer hydrogels.

While it is challenging to simultaneously achieve both high mechanical performance and self-healing ability within one polymer hydrogel network, we, herein, synthesized a novel class of hydrogels based on a combination of chemical and dual non-covalent crosslinks via micellar polymerization of 3-isocyanatomethyl-3,5,5-trimethylcyclohexyl isocyanate, end-capped by 2-hydroxyethyl methacrylate (IPDI-HEMA), with acrylamide (AM). The prepared hydrogels were demonstrated to possess a tensile elongation at a break of at least 1900%, a fracture energy of 138.4 kJ m-3, and remarkable self-healing behaviors (e.g., a strong self-healing ability achieved at ambient temperature without the need for any stimulus or healing agent). The multiple crosslinks developed in this study for one polymer hydrogel network are significant steps to construct the desired functional hydrogels with excellent self-healing and mechanical properties.

A novel Janus sponge fabricated by a green strategy for simultaneous separation of oil/water emulsions and dye contaminants.

A novel Janus sponge with the ability to remove complex contaminants from water is reported. Firstly, a superhydrophilic sponge (PA@PEI-sponge) is prepared via synthesizing negatively charged phytic acid@polyethyleneimine (PA@PEI) nanoparticles and assembling them on the surface of polydopamine (PDA) and PEI-modified polyurethane (PU) sponge through electrostatic adsorption. The Janus sponge is generated by modifying one side of the PA@PEI-sponge with PDMS, which exhibits superior separation efficiency and high filtration flux toward both water-in-oil and oil-in-water emulsions due to its multiplex selective wettability and the interconnected and tortuous 3D porous channels. The numerous negatively charged active sites of PA@PEI nanoparticles and PDA layer impart the superhydrophilic PA@PEI-sponge with the removal efficiency of 39.95 ± 0.27% for malachite green (MG) via simple flow-through filtration, which can be improved to 99.92 ± 0.07% by Janus modification. More importantly, the Janus sponge exhibits an excellent treatment capacity for complex mixtures containing emulsified oil and dye, with the separation efficiency above 99.59%. The Janus sponge also demonstrates the effective separation of real industrial wastewater collected from an acrylic dyeing plant. Together with a facile and green preparation strategy, this Janus sponge shows excellent application potential for simultaneous dye removal and oil/water emulsion separation.

Highly tough and rapid self-healing dual-physical crosslinking poly(DMAA-co-AM) hydrogel.

Introducing double physical crosslinking reagents (i.e., a hydrophobic monomer micelle and the LAPONITE® XLG nano-clay) into the copolymerization reaction of hydrophilic monomers of N,N-dimethylacrylamide (DMAA) and acrylamide (AM) is reported here by a thermally induced free-radical polymerization method, resulting in a highly tough and rapid self-healing dual-physical crosslinking poly(DMAA-co-AM) hydrogel. The mechanical and self-healing properties can be finely tuned by varying the weight ratio of nanoclay to DMAA. The tensile strength and elongation at break of the resulting nanocomposite hydrogel can be modulated in the range of 7.5-60 kPa and 1630-3000%, respectively. Notably, such a tough hydrogel also exhibits fast self-healing properties, e.g., its self-healing rate reaches 48% and 80% within 2 and 24 h, respectively.

11 W YLF-based intra-cavity pumped Ho laser with near diffraction limited beam quality.

We develop a fluoride-based intra-cavity pumped Ho laser for the first time, where the severe thermal lensing of the intra-cavity pumping mechanism can be compensated by the negative thermal-optical property of the YLiF4 (YLF) host. A maximum output power of 11.3 W (π-pol) at 2062 nm, corresponding to a conversion efficiency of 28.2% from the incident diode laser to the Ho laser, was obtained with a power instability below 0.5% and a near diffraction limited beam quality with M2 of 1.06 and 1.25 in the horizontal and vertical directions, respectively. These are the maximum power and the best beam quality for the reported compact intra-cavity pumped Ho lasers, to the best of our knowledge.

Anisotropic thermal analyses of a high efficiency Tm:YAP slab laser and its intra-cavity pumping for Ho lasers.

We evaluate the thermal effects of a c-cut Tm:YAP slab laser by considering the anisotropic properties of the biaxial YAP crystal. Significant improvements in thermal stress were demonstrated by selecting the crystallographic a-axis, which possesses higher thermal conductivity and thermal expansion, as the direction of the slab thickness. A maximum laser power of 30 W (E//a) at 2 µm was obtained under an incident LD power of 55 W with an optical conversion efficiency of 55.4% and slope efficiency of 61.8% using the a-slab. The slab laser was then used for realizing compact Ho lasers via intra-cavity pumping, resulting in a 0.8 W Ho:YAG laser and a 5.5 W Ho:YAP laser (E//b) at 2.12 µm and 2.13 µm, respectively.

Biodegradable Polylactide/TiO2 Composite Fiber Scaffolds with Superhydrophobic and Superadhesive Porous Surfaces for Water Immobilization, Antibacterial Performance, and Deodorization.

In this short communication, TiO2-nanoparticle-functionalized biodegradable polylactide (PLA) nonwoven scaffolds with a superhydrophobic and superadhesive surface are reported regarding their water immobilization, antibacterial performance, and deodorization. With numerous regular oriented pores on their surface, the as-fabricated electrospun porous PLA/TiO2 composite fibers possessed diameters in the range from 5 µm down to 400 nm, and the lengths were even found to be up to the meters range. The PLA/TiO2 composite fiber surface was demonstrated to be both superhydrophobic and superadhesive. The size of the pores on the fiber surface was observed to have a length of 200 ± 100 nm and a width of 150 ± 50 nm using field-emission scanning electron microscopy and transmission electron microscopy. The powerful adhesive force of the PLA/TiO2 composite fibers toward water droplets was likely a result of van der Waals forces and accumulated negative pressure forces. Such a fascinating porous surface (functionalized with TiO2 nanoparticles) of the PLA/TiO2 composite fiber scaffold endowed it with multiple useful functions, including water immobilization, antibacterial performance, and deodorization.

Selective Enrichment of Clenbuterol onto Molecularly Imprinted Polymer Microspheres with Tailor-made Structure and Oxygen Functionalities.

The noxious clenbuterol misapplied as the feed additive has posed an enormous threat to humans who actively rely on the food chains with high potential of contamination by clenbuterol, such as pork and beef. It is, therefore, highly desirable to develop novel materials and strategies for dealing with the clenbuterol. Herein, functional polymer microspheres prepared by Pickering emulsion polymerization were explored for the selective enrichment of the clenbuterol, and their structure and oxygen functionalities could be tailor-made by a molecular imprinting process. The clenbuterol imprinting was adequately demonstrated to not only increase the particle size (~52 nm vs. ~42 nm) and create cavities for the accommodation of the clenbuterol molecules, but also reduce the oxygen functionalities of the resulting molecularly imprinted polymer microspheres (MIPMs) by approximately 4 at.%, which is believed to correlate with the high specificity of the MIPMs. Various characterization methods were employed to evidence these findings, including scanning electron microscopy, BET measurements, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and elemental mapping examination. More importantly, the MIPMs showed a markedly superior enrichment capability towards clenbuterol to the counterpart, that is, non-molecularly imprinted polymer microspheres (NIPMs). Compared to the NIPMs without specificity for clenbuterol, the MIPMs exhibited an impressive selectivity to clenbuterol, with the relative selectivity coefficient (k') values largely exceeding 1, thus corroborating that the useful molecular imprinting led to the generation of the binding sites complementary to the clenbuterol molecule in the size and functionalities. The MIPMs were also employed as the stationary phase to fabricate molecularly imprinting solid-phase extraction column, and the spike recovery was demonstrated to be not significantly decreased even after nine cycles. Furthermore, the reliability of the method was also evidenced through the comparison of the MIPMs prepared from different batches.

Recent advances in two-dimensional transition metal dichalcogenides for biological sensing.

Layered transition metal dichalcogenides (TMDs) are important members in the family of two-dimensional (2D) materials. The large surface-to-volume ratio, combined with the fascinating tunable electronic and optical properties, low toxicity, unique van der Waals layered structure, and engineerable surface structure, renders 2D TMDs highly valuable for next-generation biosensing applications. Herein, the recent progress in the development of 2D TMDs-based biosensors is comprehensively reviewed, with special focus on the implementation of the structural, electronic and optical properties of 2D TMDs in the realization of high-performance biosensors with different configurations for a wide spectrum of bioanalytes and bio-species. In addition, the comparison on biosensing performances with graphene as the currently most studied 2D candidate is critically discussed. Finally, future perspectives are provided along the development progress of 2D TMDs-based biosensors which are currently undergoing an intense study. This work will lead researchers to explore more novel sensing candidates within the category of TMDs with exotic chemical composition, structure, morphologies, dimensionalities, and properties.

An iridescent film of porous anodic aluminum oxide with alternatingly electrodeposited Cu and SiO2 nanoparticles.

The structurally colored surface of anodic aluminum oxide (AAO) is highly useful for decoration and anti-counterfeiting applications, which are of significance for both scientific and industrial communities. This study presents the first demonstration of the fabrication of an iridescent film of porous AAO on an industrial aluminum alloy substrate, with alternatingly electrodeposited Cu and SiO2 nanoparticles (NPs). A rainbow effect was effectively obtained for the optimized sample with appropriate alternating electrodeposition times. The structure and optical properties of a series of the electrodeposited AAO-based thin film were investigated. The Cu and SiO2 NPs were found to be uniformly deposited into the porous structure of the AAO film, and the alternating electrodeposition repeating twice led to the formation of the optimal AAO-based thin film that exhibited a rainbow effect and superior anti-corrosion performance.

Long noncoding RNA Mirt2 upregulates USP10 expression to suppress hepatic steatosis by sponging miR-34a-5p.

Non-alcoholic fatty liver disease (NAFLD) is always characterized by hepatic steatosis and insulin resistance. Dysregulated long noncoding RNAs regulate pathogenesis of NAFLD. However, the role of Mirt2 (long noncoding RNA myocardial infraction associated transcript 2) in NAFLD remains unclear. This original study aims to investigate the role of Mirt2 in hepatic steatosis and insulin resistance. Mirt2 was decreased in the livers of high-fat diet (HFD) mice, Ob/Ob, Db/Db, and fasting mice. Hepatic Mirt2 restoration attenuated hyperglycemia, insulin resistance and steatosis in the livers of obese mice, and Mirt2 inhibition promoted fasting hyperglycemia and lipid droplets accumulation in normal mouse livers. Furthermore, overexpression of Mirt2 resulted in suppression of miR-34a-5p, whereas knockdown of Mirt2 exerted opposite effects in the livers. Then, miR-34a-5p was a positive regulator of NAFLD by targeting USP10, which serves as a negative regulator of NAFLD. Overexpression of Mirt2 made miR-34a-5p mimic fail to reduce luciferase activity of USP10 3'-UTR, and this regulation was also demonstrated by Western blot. Similarly, overexpression of miR-34a-5p significantly let Mirt2 lost the ability to elevate USP10 protein level. Thus, Mirt2 can function as the sponge of miR-34a-5p. Moreover, Mirt2-mediated upregulation of USP10 protein expression can be reversed by silencing USP10. USP10 inhibition could abolish Mirt2 overexpression-induced suppression of glucose production and lipogenesis in hepatocytes. In conclusion, the decrease of Mirt2 expression contributed to hepatic insulin resistance and steatosis in obese mice, and Mirt2/miR-34a-5p/USP10 was involved in NAFLD development. Overexpression of Mirt2 might be a promising strategy for treatment of NAFLD.

Preparation and Properties of Polydimethylsiloxane (PDMS)/Polyethylene Glycol (PEG)-Based Amphiphilic Polyurethane Elastomers.

Amphiphilic polyurethane elastomers (APUE) were synthesized using a two-step polyaddition reaction based on the hydroxyl-terminated polydimethylsiloxane (PDMS) and polyethylene glycol (PEG) soft segments with the molecular weights (Mw's) of 2000 and 1000, respectively. The effects of the PDMS/PEG contents on the properties and structures of the APUE were investigated. It was found that the APUE possessed high elongation, moderate tensile strength, and good thermal properties. In addition, the APUE showed tunable oxygen permeability (Dk) and water vapor transmission rate (WVTR), and a similar WVTR to that of skin could be obtained for the optimized sample (APUE2). Importantly, APUE also exhibited excellent antibacterial efficacy against two kinds of bacteria along with impressive cytocompatibility. All of the results demonstrated that the synthesized APUE will hold substantial potential for biomaterial applications.

Potassium lignosulfonate as a washing agent for remediating lead and copper co-contaminated soils.

Lignin is a renewable aromatic polymer which is present in large quantities in the cell walls of terrestrial plants and is the main binding agent for fibrous plant components. Potassium lignosulfonate (KLS), as a by-product of pulping processes, can be applied to agricultural fields as a soil conditioner and chelate fertilizer. In this study, based on its solubility and complexing ability, batch washing and column leaching was explored to evaluate the potential application of KLS in the washing remediation of soil contaminated with lead and copper. Under optimum conditions KLS concentration of 8%, pH of 5.24 and 6 h duration, the removal ratios for the simulated and mining area soils in the batch experiment were 67.40% and 52.87% respectively, for Pb and 73.42% and 55.20% respectively, for Cu. In the column leaching experiment, the removal efficiencies of Pb and Cu increased with solution volume and that the removal ratios of the simulated and mining area soils were 36.46% and 20.31%, respectively, for Pb and 39.74% and 22.76%, respectively, for Cu. KLS can reduce the ratio of acid-soluble and reducible fractions, which may have the most potential hazardous and poisonous for plants. Cation exchange capacity (CEC) and pH of soil were all stable after washing. However, the organic matter and available K, N, and P in the treated soil, which are important factors for plant growth increased significantly. This study showed that KLS can remove Pb and Cu from soil, while improve nutrient (ammonium nitrogen, available phosphorus and available potassium) levels of soil.

Determination of phthalate esters in soil using a quick, easy, cheap, effective, rugged, and safe method followed by GC-MS.

A quick, easy, cheap, effective, rugged, and safe procedure was designed to extract pesticide residues from fruits and vegetables with a high percentage of water. It has not been used extensively for the extraction of phthalate esters from sediments, soils, and sludges. In this work, this procedure was combined with gas chromatography with mass spectrometry to determine 16 selected phthalate esters in soil. The extraction efficiency of the samples was improved by ultrasonic extraction and dissolution of the soil samples in ultra-pure water, which promoted the dispersion of the samples. Furthermore, we have simplified the extraction step and reduced the risk of organic solvent contamination by minimizing the use of organic solvents. Different extraction solvents and clean-up adsorbents were compared to optimize the procedure. Dichloromethane/n-hexane (1:1, v/v) and n-hexane/acetone (1:1, v/v) were selected as the extractants from the six extraction solvents tested. C18/primary secondary amine (1:1, m/m) was selected as the sorbent from the five clean-up adsorbents tested. The recoveries from the spiked soils ranged from 70.00 to 117.90% with relative standard deviation values of 0.67-4.62%. The proposed approach was satisfactorily applied for the determination of phthalate esters in 12 contaminated soil samples.

Functionalization of Molecularly Imprinted Polymer Microspheres for the Highly Selective Removal of Contaminants from Aqueous Solutions and the Analysis of Food-Grade Fish Samples.

The proliferation of pollution in aquatic environments has become a growing concernand calls for the development of novel adsorbents capable of selectively removing notorious andrecalcitrant pollutants from these ecosystems. Herein, a general strategy was developed for thesynthesis and functionalization of molecularly imprinted polymer microspheres (MIPs) that couldbe optimized to possess a significant adsorption selectivity to an organic pollutant in aqueousmedia, in addition to a high adsorption capacity. Considering that the molecular imprinting alonewas far from satisfactory to produce a high-performance MIPs-based adsorbent, further structuralengineering and surface functionalization were performed in this study. Although the more carboxylgroups on the surfaces of the MIPs enhanced the adsorption rate and capacity toward an organicpollutant through electrostatic interactions, they did not strengthen the adsorption selectivity in aproportional manner. Through a systematic study, the optimized sample exhibiting both impressiveselectivity and capacity for the adsorption of the organic pollutant was found to possess a smallparticle size, a high specific surface area, a large total pore volume, and an appropriate amount ofsurface carboxyl groups. While the pseudo-second-order kinetic model was found to better describethe process of the adsorption onto the surface of MIPs as compared to the pseudo-first-order kineticmodel, neither Langmuir nor Freundlich isothermal model could be used to well fit the isothermaladsorption data. Increased temperature facilitated the adsorption of the organic pollutant onto theMIPs, as an endothermic process. Furthermore, the optimized MIPs were also successfully employedas a stationary phase for the fabrication of a molecularly imprinted solid phase extraction column,with which purchased food-grade fish samples were effectively examined.

Comparison of sodium hydroxide and calcium hydroxide pretreatments on the enzymatic hydrolysis and lignin recovery of sugarcane bagasse.

Sodium hydroxide (NaOH) and calcium hydroxide (Ca(OH)2) respectively dissolved in water and 70% glycerol were applied to treat sugarcane bagasse (SCB) under the condition of 80°C for 2h. NaOH solutions could remove more lignin and obtain higher enzymatic hydrolysis efficiency of SCB than Ca(OH)2 solutions. Compared with the alkali-water solutions, the enzymatic hydrolysis of SCB treated in NaOH-glycerol solution decreased, while that in Ca(OH)2-glycerol solution increased. The lignin in NaOH-water pretreatment liquor could be easily recovered by calcium chloride (CaCl2) at room temperature, but that in Ca(OH)2-water pretreatment liquor couldn't. NaOH pretreatment is more suitable for facilitating enzymatic hydrolysis and lignin recovery of SCB than Ca(OH)2 pretreatment.

Improving Visible Light-Absorptivity and Photoelectric Conversion Efficiency of a TiO2 Nanotube Anode Film by Sensitization with Bi2O3 Nanoparticles.

This study presents a novel visible light-active TiO2 nanotube anode film by sensitization with Bi2O3 nanoparticles. The uniform incorporation of Bi2O3 contributes to largely enhancing the solar light absorption and photoelectric conversion efficiency of TiO2 nanotubes. Due to the energy level difference between Bi2O3 and TiO2, the built-in electric field is suggested to be formed in the Bi2O3 sensitized TiO2 hybrid, which effectively separates the photo-generated electron-hole pairs and hence improves the photocatalytic activity. It is also found that the photoelectric conversion efficiency of Bi2O3 sensitized TiO2 nanotubes is not in direct proportion with the content of the sensitizer, Bi2O3, which should be carefully controlled to realize excellent photoelectrical properties. With a narrower energy band gap relative to TiO2, the sensitizer Bi2O3 can efficiently harvest the solar energy to generate electrons and holes, while TiO2 collects and transports the charge carriers. The new-type visible light-sensitive photocatalyst presented in this paper will shed light on sensitizing many other wide-band-gap semiconductors for improving solar photocatalysis, and on understanding the visible light-driven photocatalysis through narrow-band-gap semiconductor coupling.