Quasi-Hyperbolic Framework Graphite Foam-Based Composites with High Thermal Conductivity and Electromagnetic Shielding Properties Fabricated by an Electrochemical Expansion Method.

Nowadays, the rapid development of electronic devices requires composites with high thermal conductivity and good electromagnetic shielding properties. The key challenge lies in the construction of high-performance conductive networks. Herein, an electrochemical expansion graphite foam (EEG) with a quasi-hyperbolic framework was prepared by an electrochemical expansion method, and then the epoxy resin (EP) was filled to fabricate the composites. The graphite plate was first electrochemically intercalated and then foamed, in which plasticization was caused by weak oxidation in intercalation and the quasi-hyperbolic framework was induced by foaming during expansion. These processes were characterized by Fourier transform infrared (FTIR), micro-Raman, X-ray photoelectron spectroscopy (XPS), and so on. Based on the highly efficient quasi-hyperbolic framework and high-quality graphite structure, the thermal conductivity of the composite reached 43.523 W/(m·K), and total electromagnetic interference (EMI) shielding (SET) reached 105 dB. The heat transfer behavior was simulated by finite element analysis (FEA) in detail. This method of preparing high thermal conductivity and electromagnetic shielding materials has a good application prospect.

Advances in ionogels for proton-exchange membranes.

To ensure the long-term performance of proton-exchange membrane fuel cells (PEMFCs), proton-exchange membranes (PEMs) have stringent requirements at high temperatures and humidities, as they may lose proton carriers. This issue poses a serious challenge to maintaining their proton conductivity and mechanical performance throughout their service life. Ionogels are ionic liquids (ILs) hybridized with another component (such as organic, inorganic, or organic-inorganic hybrid skeleton). This design is used to maintain the desirable properties of ILs (negligible vapor pressure, thermal stability, and non-flammability), as well as a high ionic conductivity and wide electrochemical stability window with low outflow. Ionogels have opened new routes for designing solid-electrolyte membranes, especially PEMs. This paper reviews recent research progress of ionogels in proton-exchange membranes, focusing on their electrochemical properties and proton transport mechanisms.

Influence of TPU/EVA Phase Morphology Evolution on Supercritical Carbon Dioxide Extrusion Foaming.

Ethylene-vinyl acetate copolymer (EVA) was added at different contents to the thermoplastic polyurethane (TPU) matrix to form a non-compatible blending system, and foaming materials with high pore density were prepared using the supercritical carbon dioxide extrusion method. The influence of the phase morphology and crystal morphology of the TPU/EVA blend on its foaming behavior was studied. The results show that EVA changed the phase morphology and crystal morphology of the blends, leading to the improved melt viscosity and crystallinity of the blend system. At the same time, interfacial nucleation increases the density of cells and decreases the cell thickness and size, which is beneficial for improving the foaming properties of the blends. For the EVA content of 10% (mass fraction), the cell size is small (105.29 µm) and the cell density is the highest (3.74 × 106 cells/cm3). Based on the TPU/EVA phase morphology and crystal morphology, it is found that the sea-island structure of the blend has better foaming properties than the bicontinuous structure.