Stochastic processes shape microbial community assembly in biofilters: Hidden role of rare taxa.

Stochastic and deterministic processes are the major themes governing microbial community assembly; however, their roles in bioreactors are poorly understood. Herein, the mechanisms underlying microbial assembly and the effect of rare taxa were studied in biofilters. Phylogenetic tree analysis revealed differences in microbial communities at various stages. Null model analysis showed that stochastic processes shaped the community assembly, and deterministic processes emerged only in the inoculated activated sludge after domestication. This finding indicates the dominant role of stochastic factors (biofilm formation, accumulation, and aging). The Sloan neutral model corroborated the advantages of stochastic processes and mainly attributed these advantages to rare taxa. Cooccurrence networks revealed the importance of rare taxa, which accounted for more than 85% of the keystones. Overall, these results provide good foundations for understanding community assembly, especially the role of rare taxa, and offer theoretical support for future community design and reactor regulation.

Decoding the influence of low temperature on biofilm development: The hidden roles of c-di-GMP.

Biofilms are widely used and play important roles in biological processes. Low temperature of wastewater inhibits the development of biofilms derived from wastewater activated sludge. However, the specific mechanism of temperature on biofilm development is still unclear. This study explored the mechanism of temperature on biofilm development and found a feasible method to enhance biofilm development at low temperature. The amount of biofilm development decreased by approximately 66 % and 55 % at 4 °C and 15 °C, respectively, as compared to 28 °C. The cyclic dimeric guanosine monophosphate (c-di-GMP) concentration also decreased at low temperature and was positively correlated with extracellular polymeric substance (EPS) content, formation, and adhesion strength. Microbial community results showed that low temperature inhibited the normal survival of most microorganisms, but promoted the growth of some psychrophile bacteria like Sporosarcina, Caldilineaceae, Gemmataceae, Anaerolineaceae and Acidobacteriota. Further analysis of functional genes demonstrated that the abundance of functional genes related to the synthesis of c-di-GMP (K18968, K18967 and K13590) decreased at low temperature. Subsequently, the addition of exogenous spermidine increased the level of intracellular c-di-GMP and alleviated the inhibition effect of low temperature on biofilm development. Therefore, the possible mechanism of low temperature on biofilm development could be the inhibition of the microorganism activity and reduction of the communication level between cells, which is the closely related to the EPS content, formation, and adhesion strength. The enhancement of c-di-GMP level through the exogenous addition of spermidine provides an alternative strategy to enhance biofilm development at low temperatures. The results of this study enhance the understanding of the influence of temperature on biofilm development and provide possible strategies for enhancing biofilm development at low temperatures.

Microbial metabolic flexibility guarantees function resilience in response to starvation disturbance.

Starvation disturbance due to nutrient limitation is a common problem in bioreactors. However, an understanding of how microbial systems respond to starvation remains in its infancy. Here the metabolic response mechanism of a biofilm community to starvation was investigated using a well-controlled gaseous toluene treatment biofilter through interruption of its operation. It was found that metabolic characteristics showed significant differences before and after starvation. The dominant carbon source utilization type shifted from amino acids and carboxylic acids to esters and carbohydrates after starvation, which is more conducive to improving energy production. Metagenomic sequencing analysis supported that the changes in the dominant metabolic substrate, enhanced metabolic stability, and flexibility in the mode of energy metabolism could be the main ways to guarantee functional resilience in ecosystems after starvation. The results highlight the microbial metabolic response to starvation, which would be beneficial to the understanding of functional resilience and bioreactor stability.

Degradation of trichloroethylene by double dielectric barrier discharge (DDBD) plasma technology: Performance, product analysis and acute biotoxicity assessment.

Trichloroethylene is carcinogenic and poorly degraded by microorganisms in the environment. Advanced Oxidation Technology is considered to be an effective treatment technology for TCE degradation. In this study, a double dielectric barrier discharge (DDBD) reactor was established to decompose TCE. The influence of different condition parameters on DDBD treatment of TCE was investigated to determine the appropriate working conditions. The chemical composition and biotoxicity of TCE degradation products were also investigated. Results showed that when SIE was 300 J L-1, the removal efficiency could reach more than 90%. The energy yield could reach 72.99 g kWh-1 at low SIE and gradually decreased with the increase of SIE. The k of the Non-thermal plasma (NTP) treatment of TCE was about 0.01 L J-1. DDBD degradation products were mainly polychlorinated organic compounds and produced more than 373 mg m-3 ozone. Moreover, a plausible TCE degradation mechanism in the DDBD reactors was proposed. Lastly, the ecological safety and biotoxicity were evaluated, indicating that the generation of chlorinated organic products was the main cause of elevated acute biotoxicity.

A method establishment and application for biofilm quorum quenching activity assay.

The existence of quorum sensing (QS) and quorum quenching (QQ) plays important roles in biofilm formation. However, direct detection of QS ability is difficult due to the low concentrations of signal molecules inside the biofilm. Therefore, QQ activity is typically used to indicate the attribution of QS/QQ to the biofilm. Nevertheless, current detection methods of QQ activity based on biosensors present undesirable operability and accuracy. In this study, the 96-well plate assay based on a specific biosensor, Agrobacterium tumefaciens A136, and a colorimetric substance, X-gal was established. The reliable fitting results were obtained by standardizing the composition of the A136 X-gal assay solution and optimizing the operating conditions. This method improved the accuracy of QQ activity detection and reduced time and cost consumption. Finally, the 96-well plate assay was successfully applied to detect the QQ activities of biofilm samples and explore possible environmental influencing factors. In general, this study provided a new strategy for understanding the QQ effect in biofilm systems.

Microbial community regulation and performance enhancement in gas biofilters by interrupting bacterial communication.

BACKGROUND: Controlling excess biomass accumulation and clogging is important for maintaining the performance of gas biofilters and reducing energy consumption. Interruption of bacterial communication (quorum quenching) can modulate gene expression and alter biofilm properties. However, whether the problem of excess biomass accumulation in gas biofilters can be addressed by interrupting bacterial communication remains unknown. RESULTS: In this study, parallel laboratory-scale gas biofilters were operated with Rhodococcus sp. BH4 (QQBF) and without Rhodococcus sp. BH4 (BF) to explore the effects of quorum quenching (QQ) bacteria on biomass accumulation and clogging. QQBF showed lower biomass accumulation (109 kg/m3) and superior operational stability (85-96%) than BF (170 kg/m3; 63-92%) at the end of the operation. Compared to BF, the QQBF biofilm had lower adhesion strength and decreased extracellular polymeric substance production, leading to easier detachment of biomass from filler surface into the leachate. Meanwhile, the relative abundance of quorum sensing (QS)-related species was found to decrease from 67 (BF) to 56% (QQBF). The QS function genes were also found a lower relative abundance in QQBF, compared with BF. Moreover, although both biofilters presented aromatic compounds removal performance, the keystone species in QQBF played an important role in maintaining biofilm stability, while the keystone species in BF exhibited great potential for biofilm formation. Finally, the possible influencing mechanism of Rhodococcus sp. BH4 on biofilm adhesion was demonstrated. Overall, the results of this study achieved excess biomass control while maintaining stable biofiltration performance (without interrupting operation) and greatly promoted the use of QQ technology in bioreactors. Video Abstract.

Reduction of biofilm adhesion strength by adjusting the characteristics of biofilms through enzymatic quorum quenching.

Biofilm adhesion to the surface of a carrier plays an essential role during biofilm formation. Quorum quenching (QQ) has been shown to have great potential for delaying biofouling. However, little is known about whether QQ reduces the adhesion strength of biofilms during the formation process to inhibit biomass accumulation. In this study, we explored the effect of enzymatic QQ on the adhesion strength during biofilm development. In addition, a quantitative method was used to measure the adhesion strength of biofilms based on the shear force of water flow. Experimental results showed that QQ enzyme could reduce the adhesion strength of biofilms by at least 37% compared with the control. Furthermore, the biofilm accumulation rates were 0.05673 and 0.08762 h-1 with and without the QQ enzyme, illustrating a negative effect of QQ enzyme on biofilm accumulation. Specifically, QQ was confirmed to reduce extracellular polymeric substances, decrease the relative hydrophobicity, change the zeta potential by degrading signal molecules, and weaken the adhesion strength of biofilms. The successful reduction of the adhesion strength of the biofilm through QQ could provide a new strategy for the management and regulation of biofilm adhesion in the bioreactor.

Emissions, measurement, and control of odor in livestock farms: A review.

Odor emissions from intensive livestock farms have attracted increased attention due to their adverse impacts on the environment and human health. Nevertheless, a systematic summary regarding the characteristics, sampling detection, and control technology for odor emissions from livestock farms is currently lacking. This paper compares the development of odor standards in different countries and summarizes the odor emission characteristics of livestock farms. Ammonia, the most common odor substance, can reach as high as 4100 ppm in the compost area. Sampling methods for point and area source odor emissions are introduced in this paper, and odor analysis methods are compared. Olfactometers, odorometers, and the triangle odor bag method are usually used to measure odor concentration. Odor control technologies are divided into three categories: physical (activated carbon adsorption, masking, and dilution diffusion), chemical (plant extract spraying, wet scrubbing, combustion, non-thermal plasma, and photocatalytic oxidation), and biological (biofiltration, biotrickling, and bioscrubbing). Each technology is elucidated, and the performance in the removal of different pollutants is summarized. The application scopes, costs, operational stability, and secondary pollution of the technologies are compared. The generation of secondary pollution and long-term operation stability are issues that should be considered in future technological development. Lastly, a case analysis for engineering application is conducted.

A short review of bioaerosol emissions from gas bioreactors: Health threats, influencing factors and control technologies.

Bioaerosols have widely been a concern due to their potential harm to human health caused by the carrying and spreading of harmful microorganisms. Biofiltration has been generally used as a green and effective technology for processing VOCs. However, bioaerosols can be emitted into the atmosphere as secondary pollutants from the biofiltration process. This review presents an overview of bioaerosol emissions from gas bioreactors. The mechanism of bioaerosols production and the effect of biofiltration on bioaerosol emissions were analyzed. The results showed that the bioaerosol emission concentrations were generally exceeded 104 CFU m-3, which would damage to human health. Biomass, inlet gas velocity, moisture content, temperature, and some other factors have significant influences on bioaerosol emissions. Moreover, as a result of the analysis done herein, different inactivation technologies and microbial immobilization of bioaerosols were proposed and evaluated as a potential solution for reducing bioaerosols emissions. The purpose of this paper is to make more people realize the importance of controlling the emissions of bioaerosols in the biofiltration process and to make the treatment of VOCs by biotechnology more environmentally friendly. Additionally, the present work intends to increase people's awareness in regards to the control of bioaerosols, including microbial fragment present in bioaerosols.

Performance enhancement of a biofilter with pH buffering and filter bed supporting material in removal of chlorobenzene.

Acidic substances, which produced during chlorinated volatile organic compounds, will corrode the commonly used packing materials, and then affect the removal performance of biofiltration. In this study, three biofilters with different filter bed structure were established to treat gaseous chlorobenzene. CaCO3 and 3D matrix material was added in filter bed as pH buffering material and filter bed supporting material, respectively. A comprehensive investigation of removal performance, biomass accumulation, microbial community, filter bed height, voidage, pressure drops, and specific surface area of the three biofilters was compared. The biofilter with CaCO3 and 3D matrix material addition presented stable removal performance and microbial community, and greater biomass density (209.9 kg biomass/m3 filter bed) and growth rate (0.033 d-1) were obtained by using logistic equation. After 200 days operation, the height, voidage, pressure drop, specific surface area of the filter bed consisted of perlite was 27.4 cm, 0.39, 32.8 Pa/m, 974,89 m2/m3, while those of the filter bed with CaCO3 addition was 28.2 cm, 0.43, 21.3 Pa/m, and 1021.03 m2/m3, and those of the filter bed with CaCO3 and 3D matrix material addition was 28.7 cm, 0.55, 17.4 Pa/m, and 1041.60 m2/m3. All the results verified the biofilter with CaCO3 and 3D matrix material addition is capable of sustaining the long-term performance of biofilters. CaCO3 could limit the changes of removal efficiency, microbial community and filter bed structure by buffering the pH variation. And 3D matrix material could maintain the filter bed structure by supporting the filter bed, regardless of the buffering effect.

[Characteristics of Industrial VOCs Emission Sources and Control Technology Application in a Prefecture-level City Region-Based on Qinhuangdao City].

Volatile organic compound (VOCs) emissions and control technologies of about 609 industrial enterprises in Qinhuangdao City were investigated in this study. The results showed that the exhausted emission flow rates from the industries of oil processing, coking, and nuclear fuel processing were found to be the largest sources of VOCs in Qinhuangdao City (normally above 105 m·h-1), whereas the other industrial emission flow rates were mainly within the range of 103-105 m3·h-1. The detected VOC concentrations for all the industries were less than 1000 mg·m-3. The VOCs emission rates were between 50-10000 g·h-1, but demonstrated different characteristics among the various industries. It was found that the industries of transportation equipment manufacturing, petroleum processing, coking, nuclear fuel processing, machinery and equipment manufacturing, printing and reproduction of recorded media, and chemical raw material and chemical product manufacturing had much higher concentrations and emission rates than other industries did. However, the overall VOCs emission level from this city was still lower when compared to previous reports for other regions of China. The investigation of the VOCs control technology application showed that there were 109 constructed or operated VOCs treatment facilities among the 609 industrial enterprises. Activated carbon adsorption technology accounted for the largest proportion among the various techniques, with 69%, followed by absorption technology (19%).