Non-Metal Sulfur Doping of Indium Hydroxide Nanocube for Selectively Photocatalytic Reduction of CO2 to CH4: A "One Stone Three Birds" Strategy.

Photocatalytic CO2 reduction is considered as a promising strategy for CO2 utilization and producing renewable energy, however, it remains challenge in the improvement of photocatalytic performance for wide-band-gap photocatalyst with controllable product selectivity. Herein, the sulfur-doped In(OH)3 (In(OH)xSy-z) nanocubes are developed for selective photocatalytic reduction of CO2 to CH4 under simulated light irradiation. The CH4 yield of the optimal In(OH)xSy-1.0 can be enhanced up to 39 times and the CH4 selectivity can be regulated as high as 80.75% compared to that of pristine In(OH)3. The substitution of sulfur atoms for hydroxyl groups in In(OH)3 enhances the visible light absorption capability, and further improves the hydrophilicity behavior, which promotes the H2O dissociation into protons (H*) and accelerates the dynamic proton-feeding CO2 hydrogenation. In situ DRIFTs and DFT calculation confirm that the non-metal sulfur sites significantly weaken the over-potential of the H2O oxidation and prevent the formation of ·OH radicals, enabling the stabilization of *CHO intermediates and thus facilitating CH4 production. This work highlights the promotion effect of the non-metal doping engineering on wide-band-gap photocatalysts for tailoring the product selectivity in photocatalytic CO2 reduction.

Coupled Electronic and Magnonic Topological States in Two-Dimensional Ferromagnets.

Magnetic materials offer a fertile playground for fundamental physics discovery, with not only electronic but also magnonic topological states intensively explored. However, one natural material with both electronic and magnonic nontrivial topologies is still unknown. Here, we demonstrate the coexistence of first-order topological magnon insulators (TMIs) and electronic second-order topological insulators (SOTIs) in 2D honeycomb ferromagnets, giving rise to the nontrivial corner states being connected by the charge-free magnonic edge states. We show that, with C3 symmetry, the phase factor ± ϕ caused by the next nearest-neighbor Dzyaloshinskii-Moriya interaction breaks the pseudo-spin time-reversal symmetry T, which leads to the split of magnon bands, i.e., the emergence of TMIs with a nonzero Chern number of C=-1, in experimentally feasible candidates of MoI3, CrSiTe3, and CrGeTe3 monolayers. Moreover, protected by the C3 symmetry, the electronic SOTIs characterized by nontrivial corner states are obtained, bridging the topological aspect of fermions and bosons with a high possibility of innovative applications in spintronics devices.

Floquet engineering of the orbital Hall effect and valleytronics in two-dimensional topological magnets.

We show that circularly polarized light is a versatile way to manipulate both the orbital Hall effect and band topology in two-dimensional ferromagnets. Employing the hexagonal lattice, we proposed that interactions between light and matter allow for the modulation of the valley polarization effect, and then band inversions, accompanied by the band gap closing and reopening processes, can be achieved subsequently at two valleys. Remarkably, the distribution of orbital angular momentum can be controlled by the band inversions, leading to the Floquet engineering of the orbital Hall effect, as well as the topological phase transition from a second-order topological insulator to a Chern insulator with in-plane magnetization, and then to a normal insulator. Furthermore, first-principles calculations validate the feasibility with the 2H-ScI2 monolayer as a candidate material, paving a technological avenue to bridge the orbitronics and nontrivial topology using Floquet engineering.

Asymmetric Cu(I)─W Dual-Atomic Sites Enable C─C Coupling for Selective Photocatalytic CO2 Reduction to C2H4.

Solar-driven CO2 reduction into value-added C2+ chemical fuels, such as C2H4, is promising in meeting the carbon-neutral future, yet the performance is usually hindered by the high energy barrier of the C─C coupling process. Here, an efficient and stabilized Cu(I) single atoms-modified W18O49 nanowires (Cu1/W18O49) photocatalyst with asymmetric Cu─W dual sites is reported for selective photocatalytic CO2 reduction to C2H4. The interconversion between W(V) and W(VI) in W18O49 ensures the stability of Cu(I) during the photocatalytic process. Under light irradiation, the optimal Cu1/W18O49 (3.6-Cu1/W18O49) catalyst exhibits concurrent high activity and selectivity toward C2H4 production, reaching a corresponding yield rate of 4.9 µmol g-1 h-1 and selectivity as high as 72.8%, respectively. Combined in situ spectroscopies and computational calculations reveal that Cu(I) single atoms stabilize the *CO intermediate, and the asymmetric Cu─W dual sites effectively reduce the energy barrier for the C─C coupling of two neighboring CO intermediates, enabling the highly selective C2H4 generation from CO2 photoreduction. This work demonstrates leveraging stabilized atomically-dispersed Cu(I) in asymmetric dual-sites for selective CO2-to-C2H4 conversion and can provide new insight into photocatalytic CO2 reduction to other targeted C2+ products through rational construction of active sites for C─C coupling.

Topology-Engineered Orbital Hall Effect in Two-Dimensional Ferromagnets.

Recent advances in the manipulation of the orbital angular momentum (OAM) within the paradigm of orbitronics presents a promising avenue for the design of future electronic devices. In this context, the recently observed orbital Hall effect (OHE) occupies a special place. Here, focusing on both the second-order topological and quantum anomalous Hall insulators in two-dimensional ferromagnets, we demonstrate that topological phase transitions present an efficient and straightforward way to engineer the OHE, where the OAM distribution can be controlled by the nature of the band inversion. Using first-principles calculations, we identify Janus RuBrCl and three septuple layers of MnBi2Te4 as experimentally feasible examples of the proposed mechanism of OHE engineering by topology. With our work, we open up new possibilities for innovative applications in topological spintronics and orbitronics.

Strong Second-Harmonic Generation Induced by a Triphenylamine-Based Bismuth-Organic Framework for Photocatalytic Activity Enhancement.

Taking advantage of the well-defined geometry of metal centers and highly directional metal-ligand coordination bonds, metal-organic frameworks (MOFs) have emerged as promising candidates for nonlinear optical (NLO) materials. In this work, taking a photoresponsive carboxylate triphenylamine derivative as an organic ligand, a bismuth-based MOF, Bi-NBC, NBC = 4',4‴,4‴″-nitrilotris(([1,1'-biphenyl]-4-carboxylic acid)) is obtained. Structure determination reveals that it is a potential NLO material derived from its noncentrosymmetric structure, which is finally confirmed by its rarely strong second harmonic generation (SHG) effect. Theoretical calculations reveal that the potential difference around Bi atoms is large; therefore, it leads to a strong local built-in electric field, which greatly facilitates the charge separation and transfer and finally improves the photocatalytic performance. Our results provide a reference for the exploration of MOFs with NLO properties.

Hydrogen Bonds Induced Ultralong Stability of Conductive π-d Conjugated FeCo3(DDA)2 with High OER Activity.

Conductive π-d conjugated metal-organic frameworks (MOFs) have attracted wide concerns in electrocatalysis due to their intrinsic high conductivity. However, the poor electrocatalytic stability is still a major problem that hinders the practical application of MOFs. Herein, a novel approach to enhancing the stability of MOF-based electrocatalyst, namely, the introduction of hydrogen bonds (H-bonds), is reported. Impressively, the π-d conjugated MOF FeCo3(DDA)2 (DDA = 1,5-diamino-4,8-dihydroxy-9,10-anthraceneedione) exhibits ultrahigh oxygen evolution reaction (OER) stability (up to 2000 h). The experimental studies demonstrate that the presence of H-bonds in FeCo3(DDA)2 is responsible for its ultrahigh OER stability. Besides that, FeCo3(DDA)2 also displays a prominent OER activity (an overpotential of 260 mV vs reversible hydrogen electrode (RHE) at a current density of 10 mA cm-2 and a Tafel slope of 46.86 mV dec-1). Density functional theory (DFT) calculations further indicate that the synergistic effect of the Fe and Co sites in FeCo3(DDA)2 contributes to its prominent OER performance. This work provides a new avenue of boosting the electrocatalytic stability of conductive π-d conjugated MOFs.

Engineering Layertronics in Two-Dimensional Ferromagnetic Multiferroic Lattice.

Layertronics, rooted in the layer Hall effect (LHE), is an emerging fundamental phenomenon in condensed matter physics and spintronics. So far, several theoretical and experimental proposals have been made to realize LHE, but all are based on antiferromagnetic systems. Here, using symmetry and tight-binding model analysis, we propose a general mechanism for engineering layertronics in a two-dimensional ferromagnetic multiferroic lattice. The physics is related to the band geometric properties and multiferroicity, which results in the coupling between Berry curvature and layer degree of freedom, thereby generating the LHE. Using first-principles calculations, we further demonstrate this mechanism in bilayer (BL) TcIrGe2S6. Due to the intrinsic inversion and time-reversal symmetry breakings, BL TcIrGe2S6 exhibits multiferroicity with large Berry curvatures at both the center and corners of the Brillouin zone. These Berry curvatures couple with the layer physics, forming the LHE in BL TcIrGe2S6. Our work opens a new direction for research on layertronics.

Composite of formamidinium lead bromide perovskite FAPbBr3 with reduced graphene oxide (rGO) for efficient H2 evolution from HBr splitting.

Solar hydrobromic acid (HBr) splitting using perovskite photocatalysts provides an attractive avenue to store solar energy into hydrogen (H2) and bromine (Br2), while an efficient photocatalytic system is still demanded. As for the semiconductor photocatalyst, formamidinium perovskites show some superiorities in structural stability, light adsorption and charge dynamics compared to their methylammonium counterparts, which are fitter for the photocatalysis process. Herein, the composite of formamidinium lead bromide perovskite (FAPbBr3) with reduced graphene oxide (rGO) is prepared using a facile photoreduction method. Under simulated sunlight irradiation (AM1.5G, 100 mW cm-2), this FAPbBr3/rGO composite (100 mg) demonstrates a noteworthy enhancement in photocatalytic H2 evolution activity of 386.7 µmol h-1, and it exhibits a notable stability with no significant decrease after 50 h of repeated tests. The single particle PL (photoluminescence) microscope is employed to study the charge dynamics, revealing that rGO in the composite effectively promotes the carrier separation. This work provides a highly efficient and stable photocatalyst for HBr splitting, and offers an effective modification strategy on lead bromide perovskites.

Pd-Decorated Cu2O-Ag Catalyst Promoting CO2 Electroreduction to C2H4 by Optimizing CO Intermediate Adsorption and Hydrogenation.

Electrocatalytic CO2 reduction reaction (CO2RR) to high value-added products, such as ethylene (C2H4), offers a promising approach to achieve carbon neutrality. Although recent studies have reported that a tandem catalyst (for example, Cu-Ag systems) exhibits advantage in C2H4 production, its practical application is largely inhibited by the following: (1) a traditional tandem catalyst cannot effectively stabilize the *CO intermediate, resulting in sluggish C-C coupling, and (2) inadequate H2O activation ability hinders the hydrogenation of intermediates. To break through the above bottleneck, herein, palladium (Pd) was introduced into Cu2O-Ag, a typical conventional tandem catalyst, to construct a Cu2O-Pd-Ag ternary catalyst. Extensive experiment and density functional theory calculation prove that Pd can efficiently stabilize the *CO intermediate and promote the H2O activation, which contributes to the C-C coupling and intermediate hydrogenation, the key steps in the conversion of CO2 to C2H4. Beneficial to the efficient synergy of Cu2O, Pd, and Ag, the optimal Cu2O-Pd-Ag ternary catalyst achieves CO2RR toward C2H4 with a faradaic efficiency of 63.2% at -1.2 VRHE, which is higher than that achieved by Cu2O-Ag and most of other reported catalysts. This work is a fruitful exploration of a rare ternary catalyst, providing a new route for constructing an efficient CO2RR electrocatalyst.

Unveiling pH-Dependent Adsorption Strength of *CO2 - Intermediate over High-Density Sn Single Atom Catalyst for Acidic CO2-to-HCOOH Electroreduction.

The acidic electrochemical CO2 reduction reaction (CO2RR) for direct formic acid (HCOOH) production holds promise in meeting the carbon-neutral target, yet its performance is hindered by the competing hydrogen evolution reaction (HER). Understanding the adsorption strength of the key intermediates in acidic electrolyte is indispensable to favor CO2RR over HER. In this work, high-density Sn single atom catalysts (SACs) were prepared and used as catalyst, to reveal the pH-dependent adsorption strength and coverage of *CO2 - intermediatethat enables enhanced acidic CO2RR towards direct HCOOH production. At pH=3, Sn SACs could deliver a high Faradaic efficiency (90.8 %) of HCOOH formation and a corresponding partial current density up to -178.5 mA cm-2. The detailed in situ attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopic studies reveal that a favorable alkaline microenvironment for CO2RR to HCOOH is formed near the surface of Sn SACs, even in the acidic electrolyte. More importantly, the pH-dependent adsorption strength of *CO2 - intermediate is unravelled over the Sn SACs, which in turn affects the competition between HER and CO2RR in acidic electrolyte.

Enhanced Charge Transfer Process and Photocatalytic Activity over a Phosphonate-based MOF via Amorphization Strategy.

Recently, amorphous materials have gained great attention as an emerging kind of functional material, and their characteristics such as isotropy, absence of grain boundaries, and abundant defects are very likely to outrun the disadvantages of crystalline counterparts, such as low conductivity, and ultimately lead to improved charge transfer efficiency. Herein, we investigated the effect of amorphization on the charge transfer process and photocatalytic performance with a phosphonate-based metal-organic framework (FePPA) as the research object. Comprehensive experimental results suggest that compared to crystalline FePPA, amorphous FePPA has more distorted metal nodes, which affects the electron distribution and consequently improves the photogenerated charge separation efficiency. Meanwhile, the distorted metal nodes in amorphous FePPA also greatly promote the adsorption and activation of O2. Hence, amorphous FePPA exhibits a better performance of photocatalytic C(sp3)-H bond activation for selective oxidation of toluene to benzaldehyde. This work illustrates the advantages of amorphous MOFs in the charge transfer process, which is conducive to the further development of high performance MOFs-based photocatalysts.

Revealing the Lattice Carbonate Mediated Mechanism in Cu2(OH)2CO3 for Electrocatalytic Reduction of CO2 to C2H4.

Understanding the CO2 transformation mechanism on materials is essential for the design of efficient electrocatalysts for CO2 reduction. In aconventional adsorbate evolution mechanism (AEM), the catalysts encounter multiple high-energy barrier steps, especially CO2 activation, limiting the activity and selectivity. Here, lattice carbonate from Cu2(OH)2CO3 is revealed to be a mediator between CO2 molecules and catalyst during CO2 electroreduction by a 13C isotope labeling method, which can bypass the high energy barrier of CO2 activation and strongly enhance the performance. With the lattice carbonate mediated mechanism (LCMM), the Cu2(OH)2CO3 electrode exhibited ten-fold faradaic efficiency and 15-fold current density for ethylene production than the Cu2O electrode with AEM at a low overpotential. Theoretical calculations and in situ Raman spectroscopy results show that symmetric vibration of carbonate is precisely enhanced on the catalyst surface with LCMM, leading to faster electron transfer, and lower energy barriers of CO2 activation and carbon-carbon coupling. This work provides a route to develop efficient electrocatalysts for CO2 reduction based on lattice-mediated mechanism.

Layer-coupled corner states in two-dimensional topological multiferroics.

The structural diversity and controllability in two-dimensional (2D) materials offers an intriguing platform for exploring a wide range of topological phenomena. The layer degree of freedom, as a novel technique for material manipulation, requires further investigation regarding its association with topological states. Here, using first-principles calculations and a tight-binding model, we propose a novel mechanism that couples the second-order topological corner states with the layer degree of freedom. By analyzing the edge states, topological indices, and spectra of nanoflakes, we identify ferromagnetic H'-Co2XF2 (X = C, N) as 2D second-order topological insulators with intrinsic ferroelectricity. Moreover, the topological corner states strongly couple with the layer degree of freedom, and, remarkably, ferroelectricity provides a nonvolatile handle to manipulate the layer-polarized corner states. These findings open an avenue for the manipulation of second-order topological states and establish a bridge between ferroelectricity and nontrivial topology.

A Conductive 3D Dual-Metal π-d Conjugated Metal-Organic Framework Fe3(HITP)2/bpm@Co for Highly Efficient Oxygen Evolution Reaction.

Although 2D π-d conjugated metal-organic frameworks (MOFs) exhibit high in-plane conductivity, the closely stacked layers result in low specific surface area and difficulty in mass transfer and diffusion. Hence, a conductive 3D MOF Fe3(HITP)2/bpm@Co (HITP = 2,3,6,7,10,11-hexaiminotriphenylene) is reported through inserting bpm (4,4'-bipyrimidine) ligands and Co2+ into the interlayers of 2D MOF Fe3(HITP)2. Compared to 2D Fe3(HITP)2 (37.23 m2 g-1), 3D Fe3(HITP)2/bpm@Co displays a huge improvement in the specific surface area (373.82 m2 g-1). Furthermore, the combined experimental and density functional theory (DFT) theoretical calculations demonstrate the metallic behavior of Fe3(HITP)2/bpm@Co, which will benefit to the electrocatalytic activity of it. Impressively, Fe3(HITP)2/bpm@Co exhibits prominent and stable oxygen evolution reaction (OER) performance (an overpotential of 299 mV vs RHE at a current density of 10 mA cm-2 and a Tafel slope of 37.14 mV dec-1), which is superior to 2D Fe3(HITP)2 and comparable to commercial IrO2. DFT theoretical calculation reveals that the combined action of the Fe and Co sites in Fe3(HITP)2/bpm@Co is responsible for the enhanced electrocatalytic activity. This work provides an alternative approach to develop conductive 3D MOFs as efficient electrocatalysts.

Enhanced cycloaddition between CO2 and epoxide over a bismuth-based metal organic framework due to a synergistic photocatalytic and photothermal effect.

The cycloaddition reaction between CO2 and epoxide is an efficient way to convert CO2 into high value-added chemicals. Therefore, it is particularly important to develop efficient catalysts that can catalyze the reaction under mild conditions. In this work, a metal-organic framework (Bi-HHTP, consisting of bismuth (Bi) as metal dots and 2,3,6,7,10,11-hexahydroxy-triphenylene (HHTP) as organic linkers) with zigzagging corrugated topology was successfully synthesized, which shows excellent catalytic activity under visible light irradiation. Various characterizations suggest that the excellent activity is derived from the following reasons: (1) the abundant exposed Bi sites provide Lewis sites for adsorption of epoxides and CO2; (2) the free holes produced over Bi-HHTP under light irradiation which could oxidize epoxide, which consequently facilitateing the subsequent ring-opening reaction; and (3) the existence of synergistic photocatalytic and photothermal effect in Bi-HHTP. This study provides a new avenue of developing bismuth-based metal organic frameworks to promote the efficiency of cycloaddition of CO2 under mild conditions.

Engineering Gapless Edge States from Antiferromagnetic Chern Homobilayer.

We put forward that stacked Chern insulators with opposite chiralities offer a strategy to achieve gapless helical edge states in two dimensions. We employ the square lattice as an example and elucidate that the gapless chiral and helical edge states emerge in the monolayer and antiferromagnetically stacked bilayer, characterized by Chern number C=-1 and spin Chern number CS=-1, respectively. Particularly, for a topological phase transition to the normal insulator in the stacked bilayer, a band gap closing and reopening procedure takes place accompanied by helical edge states disappearing, where the Chern insulating phase in the monolayer vanishes at the same time. Moreover, EuO is revealed as a suitable candidate for material realization. This work is not only valuable to the research of the quantum anomalous Hall effect but also offers a favorable platform to realize magnetic topologically insulating materials for spintronics applications.

A Conductive Two-dimensional Trimetallic FeCoNi-Benzenehexathiol π-d Conjugated Metal-organic Framework for Highly Efficient Oxygen Evolution Reaction.

The poor electrically conductivity of metal-organic frameworks (MOFs) is the main factor hinder their application in electrocatalysis field. In this work, we synthesize a conductive two-dimensional (2D) trimetallic π-d conjugated metal-organic framework (MOF) FeCoNi-BHT (BHT = 1,2,3,4,5,6-benzenehexathiol) through coordinating Co, Fe and Ni ions with 1,2,3,4,5,6-benzenehexathiol ligands. FeCoNi-BHT is demonstrated possessing homogeneously dispersed abundant Co-S4, Fe-S4, Ni-S4 single-atom active sites (14.26 wt% of the metal elements) and a large specific surface area (267.05 m2g-1). The room temperature conductivity of FeCoNi-BHT is measured to be 92 S m-1, indicating its metallic behavior. DFT theoretical calculation reveals that the π-d conjugation structure of FeCoNi-BHT is responsible for its metallic behavior. In addition, FeCoNi-BHT exhibits prominent oxygen evolution reaction (OER) activity (an overpotential of 266 mV vs. RHE at 10 mA cm-2 and a Tafel value of 58 mV dec-1) in alkaline media. The combined experimental and DFT studies reveal that the synergistic effect of Co, Fe, Ni sites of FeCoNi-BHT contribute to its prominent OER activity. This work paves a new avenue of developing 2D π-d conjugated MOFs with different metal centers as highly efficient eletrocatalysts.

High-Throughput Screening of Effective Dual Atom Catalysts for the Nitric Oxide Reduction Reaction.

Electrochemical NO-to-NH3 conversion has been attracting more attention in the field of green energy, which, however, imposes restrictions on the catalysts. We therefore design a family of dual atom catalysts (DACs) TM1TM2@g-CN and perform high-throughput screening to position the effective catalysts for electrocatalytic NO-to-NH3 conversion from first-principles computations. We identify that TiCr@g-CN (-0.37 V), TiMo@g-CN (-0.36 V), and MnMo@g-CN (-0.43 V) are promising candidates with low overpotentials. In particular, we find that MoMo@g-CN can spontaneously reduce NO to NH3, which makes it an excellent electrocatalyst for the NO reduction reaction (NORR) to be translated to experiments. In terms of the local geometry feature and local electronic structures, we unravel the origin of the high NORR activity and high selectivity of the DAC MoMo@g-CN.

Bloch-type magnetic skyrmions in two-dimensional lattices.

Magnetic skyrmions in two-dimensional lattices are a prominent topic of condensed matter physics and materials science. Current research efforts in this field are exclusively constrained to Néel-type and antiskyrmions, while Bloch-type magnetic skyrmions are rarely explored. Here, we report the discovery of Bloch-type magnetic skyrmions in a two-dimensional lattice of MnInP2Te6, using first-principles calculations and Monte-Carlo simulations. Arising from the joint effect of broken inversion symmetry and strong spin-orbit coupling, monolayer MnInP2Te6 presents large Dzyaloshinskii-Moriya interaction. This, along with ferromagnetic exchange interaction and out-of-plane magnetic anisotropy, gives rise to skyrmion physics in monolayer MnInP2Te6, in the absence of a magnetic field. Remarkably, different from all previous works on two-dimensional lattices, the resultant magnetic skyrmions feature Bloch-type magnetism, which is protected by D3 symmetry. Furthermore, Bloch-type magnetic bimerons are also identified in monolayer MnTlP2Te6. The phase diagrams of these Bloch-type topological magnetisms under a magnetic field, temperature and strain are mapped out. Our results greatly enrich the research on magnetic skyrmions in two-dimensional lattices.