[Ozone Pollution Characteristics and Sensitivity During the Ozone Pollution Days in Summer 2021 of Xinxiang City].

This study was based on the observation of volatile organic compounds (VOCs), conventional gaseous air pollutants, and meteorological parameters observed at the Xinxiang Municipal Party School site from June to August 2021. The ozone (O3) characteristics and sensitivity of O3 pollution days and the control strategy of its precursors were studied using an observation-based model (OBM). It was found that the meteorological conditions were characterized by high temperature, low humidity, and low pressure in O3-pollution days. The concentrations of O3 and its precursors all increased in the O3 pollution days. Oxygenated volatile organic compounds (OVOCs) and alkanes were the highest-concentration components of VOCs on O3 pollution days in Xinxiang, and OVOCs had the highest ozone formation potential (OFP) and hydroxyl (·OH) reactivity. According to the relative incremental reactivity (RIR) analysis, during the O3 pollution days in Xinxiang, O3sensitivity was in the VOCs-limited regime in June and in the transitional regime in July and August. Ozone production was more sensitive to alkenes and OVOCs. The RIR values of the precursors in June changed throughout the day, but O3 sensitivity remained the VOCs-limited regime. In July and August, O3 sensitivity was the VOCs-limited regime in the morning, transitional regime at noon, transitional and NOx-limited regime, respectively in the afternoon. By simulating different precursor-reduction scenarios, the results showed that the reduction of VOCs was always beneficial to the control of O3, whereas the reduction of NOx had little effect on the control of O3 and a risk of increasing O3.

Efficacy and Safety of Coronary Intervention via Distal Transradial Access (dTRA) in Patients with Low Body Mass Index.

The study aimed to investigate the efficacy and safety of coronary intervention via distal transradial access (dTRA) in patients with low body mass index (BMI). A total of 67 patients with low BMI who underwent coronary intervention, comprising 29 patients via dTRA and 38 patients via conventional transradial access (cTRA), were retrospectively included. There was no significant difference in the puncture success rate between the two groups (dTRA 96.6%, cTRA 97.4%, P=0.846). Compared with the cTRA group, the success rate of one-needle puncture in the dTRA group was lower (51.7% vs. 81.6%, P=0.020). The compression haemostasis time in the dTRA group was shorter than that in the cTRA group (P < 0.001). However, the incidence of radial artery occlusion was lower in the dTRA group than in the cTRA group (4.0% vs. 33.3%, P=0.007). In conclusion, coronary intervention via dTRA was safe and effective in patients with low BMI.

Safety and efficacy of coronary angiography and percutaneous coronary intervention via distal transradial artery access in the anatomical snuffbox: a single-centre prospective cohort study using a propensity score method.

BACKGROUND: This study investigated the safety and efficacy of coronary angiography (CAG) and percutaneous coronary intervention (PCI) via distal transradial artery access (d-TRA). METHODS: For this single-centre prospective cohort study, a total of 1066 patients who underwent CAG or PCI procedures from September 2019 to November 2020 were included. Patients were divided into two groups: the d-TRA group (346) and the conventional transradial artery access (c-TRA) group (720) based on access site. A total of 342 pairs of patients were successfully matched using propensity score matching (PSM) for subsequent analysis. RESULTS: No significant differences in puncture success rate, procedural method, procedural time, sheath size, contrast dosage or fluoroscopy time were noted between the two groups. The puncture time in the d-TRA group was longer than that in the c-TRA group (P < 0.01), and the procedure success rate was lower than that in the c-TRA group (90.94% vs. 96.49%, P = 0.01). The haemostasis time in the d-TRA group was shorter than that in the c-TRA group (P < 0.01), and the visual analogue scale (VAS) was lower than that in the c-TRA group (P < 0.01). In addition, the prevalence of bleeding and haematoma in the d-TRA group was lower than that in the c-TRA group (1.75% vs. 7.31%, P < 0.01; 0.58% vs. 3.22%, P = 0.01, respectively). No significant difference in the incidence of numbness was noted between the two groups. No other complications were found in two groups. CONCLUSION: d-TRA is as safe and effective as c-TRA for CAG and PCI. It has the advantages of improved comfort and fewer complications. Trail registration Chinese Clinical Trial Registry, ChiCTR1900026519.

Bispecific antibody simultaneously targeting PD1 and HER2 inhibits tumor growth via direct tumor cell killing in combination with PD1/PDL1 blockade and HER2 inhibition.

Immune checkpoint blockade has shown significant clinical benefit in multiple cancer indications, but many patients are either refractory or become resistant to the treatment over time. HER2/neu oncogene overexpressed in invasive breast cancer patients associates with more aggressive diseases and poor prognosis. Anti-HER2 mAbs, such as trastuzumab, are currently the standard of care for HER2-overexpressing cancers, but the response rates are below 30% and patients generally suffer relapse within a year. In this study we developed a bispecific antibody (BsAb) simultaneously targeting both PD1 and HER2 in an attempt to combine HER2-targeted therapy with immune checkpoint blockade for treating HER2-positive solid tumors. The BsAb was constructed by fusing scFvs (anti-PD1) with the effector-functional Fc of an IgG (trastuzumab) via a flexible peptide linker. We showed that the BsAb bound to human HER2 and PD1 with high affinities (EC50 values were 0.2 and 0.14 nM, respectively), and exhibited potent antitumor activities in vitro and in vivo. Furthermore, we demonstrated that the BsAb exhibited both HER2 and PD1 blockade activities and was effective in killing HER2-positive tumor cells via antibody-dependent cellular cytotoxicity. In addition, the BsAb could crosslink HER2-positive tumor cells with T cells to form PD1 immunological synapses that directed tumor cell killing without the need of antigen presentation. Thus, the BsAb is a new promising approach for treating late-stage metastatic HER2-positive cancers.

[Characteristics of Industrial Volatile Organic Compounds(VOCs) Emission in China from 2011 to 2019].

In order to better understand the industrial volatile organic compounds(VOCs) emissions in China in recent years, an industrial VOCs emission inventory was developed from 2011 to 2019, based on the dynamic emission factors method and the comprehensive source classification system. The results showed that VOCs emissions increased first from 11122.7 kt in 2011 to 13397.9 kt in 2017, and then decreased to 13247.0 kt in 2019. The emission structure of the four source categories changed. The contribution from basic organic chemical industries, gasoline storage and transportation, manufacturing(i.e., coatings, inks, pigments, and similar products), and industrial protective coatings continued to increase. On the contrary, the contributions of oil and natural gas processing, automobile, and container manufacturing industries declined over the study period. Among the industrial emissions in China in 2019, industrial coating, printing, and basic organic chemical industries emitted large amounts of VOCs(accounting for 39.2% of the total emission), and because their contribution became increasingly prominent since 2011, these sectors will be the key emission sources in the future. With respect to the spatial distribution in 2019, East China and South China had the largest VOCs emissions. Shandong, Guangdong, Jiangsu, and Zhejiang were the four provinces that contributed the most, accounting for 40.6% of the total VOCs emissions.

Recanalization of the occluded radial artery via distal transradial access in the anatomic snuffbox.

BACKGROUND: Radial artery occlusion is a common complication after coronary angiography and percutaneous coronary intervention via the transradial access. In recent years, coronary angiography and percutaneous coronary intervention via the distal transradial access has gradually emerged, but recanalization of the occluded radial artery through the distal transradial access has rarely been reported. CASE PRESENTATION: A 67-year-old female with arterial hypertension and diabetes mellitus was admitted to the hospital due to chest pain for three hours. She was diagnosed with acute myocardial infarction. After admission, the patient successfully underwent emergency coronary angiography and percutaneous coronary intervention through the right transradial access. Radial artery occlusion was found after the operation, and recanalization was successfully performed through the right distal transradial access before discharge. Immediately after the operation and one month later, vascular ultrasonography showed that the antegrade flow was normal. CONCLUSIONS: This report presents a case of radial artery occlusion after emergency coronary angiography and percutaneous coronary intervention in which recanalization was successfully performed through the right distal transradial access. This case demonstrates that recanalization of a radial artery occlusion via the distal transradial access is safe and feasible.

[Characteristics of Volatile Organic Compounds in Wood Coatings and Automotive Coatings in China].

Presently, there are a few studies on the measurement of industrial organic solvents in China. To determine the content and species of volatile organic compounds (VOCs) in industrial organic solvents and to provide the emission factors of organic solvents, the Chinese wood and automotive coatings, which accounted for the largest proportion of production in the world, were investigated. Coating samples were obtained by sampling from companies and buying from markets, and were measured in accordance with the domestic standard testing methods for coatings. The content and composition spectrum of VOCs in the coatings were determined, and the ozone formation potential (OFP) was then calculated. The results showed that for wood coatings, the average content of the VOCs in solvent-based, water-based, and ultra-violet (UV) coatings were 37.28%, 9.88%, and 18.02%, respectively. For automotive coatings, the average content of the VOCs in water-based original equipment manufacturer (OEM) coating, solvent-based OEM coating, water-based refinishing coating, and solvent-based refinishing coating were 15.06%, 59.90%, 11.79%, and 54.50%, respectively. The content of the VOCs in different types of coatings varied substantially. The main components and OFP contributors were alcohols and ethers for water-based coatings, benzene series and esters for solvent-based coatings, and esters, alcohols, and ethers for UV coatings. The average value of the coating samples could meet the current mandatory national standards, but 12% of the solvent-based wood coating samples and 42% of the solvent-based OEM coating samples did not meet the standards. In addition, except for the benzene series of the water-based wood coatings, the contents of harmful substances in other coating samples were up to the standards.

Application of an alternating phase-shifting mask design method to near-field photolithography for fabricating more than 2 GHz SAW devices.

We use an alternating phase-shifting mask design method (APSMDM) to design and fabricate a specially designed surface acoustic wave (SAW) filter mold that has a linewidth pattern of only 5 microm (not small). A basic SAW filter mold [having a general interdigital transducer (IDT) pattern] also is fabricated for comparison. A near-field phase shift lithographic (NFPSL) process is applied in the fabrication of the narrow gap SAW devices, during which process the narrow gaps and short optical distance (SOD) electrodes are derived. We note that, in this way, important features (such as floating electrodes, high-metallization ratio, and a narrow gap structure) for enhancing the performance of high-efficiency SAW devices can be produced simultaneously. In addition, the other half of the special IDT pattern strips can be derived by using this APSMDM. This causes a decrease in the periodicity of the IDT pattern and, therefore, a decrease in the acoustic wavelength, in turn leading to an increase in the deltaf (deltaf is the difference in frequency between the harmonic and its adjacent harmonic) and a decrease in the insertion loss. A 2.75 GHz SAW filter is fabricated using the APSMDM with a mold with only 5-microm wide linewidth fingers.