Effects of Slip Length and Inertia on the Permeability of Fracture with Slippery Boundary Condition.

Although the slippery boundary condition (BC) has been validated to enhance fracture permeability (k), the coupling effects of heterogeneous slippery BC and inertia on k remain less understood. We used computational fluid dynamics to investigate the competing roles of slippery BC and inertial forces in controlling k evolution with increasing pressure gradient by designing six cases with different slip length scenarios for a two-dimensional natural fracture. Our results suggest that pronounced inertial effects were directly related to and demonstrated by the growth of recirculation zone (RZ); this caused flow regimes transitioning from Darcy to non-Darcy and significantly reduced k, with an identical tailing slope for six cases, regardless of the variability in slip lengths. Moreover, the slippery BC dominantly determine the magnitude of k with orders depending on the slip length. Lastly, our study reveals that the specific k evolution path for the case with a varying slip length was significantly different from other cases with a homogeneous one, thus encouraging more efforts in determining the slip length for natural fractures via experiments.

Biodegradation of carbon tetrachloride from groundwater in an upflow solid-phase biofilm system.

In the present study, an upflow solid-phase denitrification biofilm reactor (US-DBR) was applied for simultaneous carbon tetrachloride (CT) and nitrate removal from groundwater by using poly(butylene succinate) (PBS) as carbon source and biocarrier. After 80 days continuous operation, the nitrate and CT removal efficiencies in the biofilm reactor were high of 98% and 94.3%, respectively. After PBS-biofilm formation, protein (PN) content in loosely bound extracellular polymeric substances (LB-EPS) and tightly bound EPS (TB-EPS) significantly increased 2.6 and 4.0 times higher in the presence of CT than those of absence of CT, while PS increased 1.9 and 2.0 times higher. According to excitation-emission matrix (EEM), CT exposure contributed to the increased fluorescent intensities of the aromatic PN-like and tryptophan PN-like substances. Along with the height of US-DBR, the denitrification activity was inhibited by the CT exposure, and most of CT was significant transformed accompanied by nitrate removal. Two components of soluble microbial products (SMP) were identified, including humic-like substances for component 1 and PN-like substances for component 2, respectively. It was found from high-throughput 16S rRNA gene sequencing analysis that significant differences were observed at genus level by taxonomic assignments to CT exposure. Thiobacillus, Thauera, Candidatus_Competibacter and Hydrogenophaga were the main genus in the presence of CT at the proportion of 6.77%, 5.47%, 3.59% and 3.17%, respectively.

The Blocking Effect of Clay in Groundwater Systems: A Case Study in an Inland Plain Area.

In order to increase understanding of the hydrogeochemical effects that influence changes in the quality of salt water, we investigated the distribution of saline and fresh water in an inland plain area and, in particular, the scarcity of fresh water resources. Taking the inland plain in Jiyang County as a specific case study, samples of undisturbed clay and underground saline water from different depths were collected to examine hydrogeological changes. A wide variety of methods was used to analyze the blocking effect of clay on the chemical characteristics of the groundwater. These include real-time monitoring for field water quality, tests for isothermal adsorption, a factor analysis model, physiochemical analysis, and correlation analysis. Our results show that the optimal adsorption isotherm of clay for Na⁺, Ca2+ and Mg2+ in groundwater conform to the established Henry and Langmuir equations for adsorption isotherms. The influence of clay mineral types and content on the blockage of Na⁺, Ca2+ and Mg2+ in groundwater samples were evident at different depths, with the clay adsorption capacity increasing in line with increases in the clay mineral content. Clay at different depths was found to have the strongest blocking effect on Na⁺ in groundwater, being systematically greater than its effect on Ca2+ and Mg2+. It is believed that the blocking effect of clay has an important influence on the hydrochemical zoning of groundwater in inland plains and the formation of saline water in groundwater systems. This study therefore provides concrete evidence in support of this supposed effect.

Parallel Processing Transport Model MT3DMS by Using OpenMP.

Solute transport modeling resolves advection, dispersion, and chemical reactions in groundwater systems with its accuracy depending on the resolution of domain at all scales, thus the computational efficiency of a simulator becomes a bottleneck for the wide application of numerical simulations. However, the traditional serial numerical simulators have reached their limits for the prohibitive computational time and memory requirement in solving large-scale problems. These limitations have greatly hindered the wide application of groundwater solute transport modeling. Thus, the development of an efficient method for handling large-scale groundwater solute transport simulation is urgently required. In this study, we developed and assessed a parallelized MT3DMS (Modular Three-Dimensional Multispecies Transport Model) by using OpenMP (Open specifications for Multi-Processing) to accelerate the solute transport simulation process. The parallelization was achieved by adding OpenMP compile directives (i.e., defining various types of parallel regions) into the most time-consuming packages, including the Advection package (ADV), Dispersion package (DSP), and Generalized Conjugate Gradient Solver package (GCG). This allows parallel processing on shared-memory multiprocessors, i.e., both the memory requirement and computing efforts are automatically distributed among all processors. Moreover, we discussed two different parallelization strategies for handling numerical models with either many layers or few layers. The performance of parallelized MT3DMS was assessed by two benchmark numerical models with different model domain sizes via a workstation with two quad-core processors. Results showed that the running time of parallelized MT3DMS can be 4.15 times faster than that using sequential MT3DMS. The effects of using different preconditioners (procedures that transform a given problem into a form that is more suitable for numerical solving methods) in the GCG package were additionally evaluated. The modified strategy for handling numerical models with few layers also achieved satisfactory results with running time two times faster than that via sequential simulation. Thus, the proposed parallelization allows high-resolution groundwater transport simulation with higher efficiency for large-scale or multimillion-cell simulation problems.

Assessment of microbial products in the biosorption process of Cu(II) onto aerobic granular sludge: Extracellular polymeric substances contribution and soluble microbial products release.

In the present study, the responses of microbial products in the biosorption process of Cu(II) onto aerobic granular sludge were evaluated by using batch and spectroscopic approaches. Batch experimental data showed that extracellular polymeric substances (EPSs) contributed to Cu(II) removal from an aqueous solution, especially when treating low metal concentrations, whereas soluble microbial products (SMPs) were released under the metal stress during biosorption process. A three-dimensional excitation-emission matrix (3D-EEM) identified four main fluorescence peaks in the EPS, i.e., tryptophan protein-like, aromatic protein-like, humic-like and fulvic acid-like substances, and their fluorescence intensities decreased gradually in the presence of Cu(II) during the sorption process. Particularly, tryptophan protein-like substances quenched the Cu(II) binding to a much higher extent through a static quenching process with less than one class of binding sites. According to the synchronous fluorescence spectra, the whole fluorescence intensity of released SMP samples expressed an increased trend with different degrees along with contact time. Two-dimensional correlation spectroscopy (2D-COS) suggested that the fulvic-like fluorescence fraction might be more susceptible to metal exposure than other fractions. The result of molecular weight distribution demonstrated that the SMPs released from the biosorption process differed significantly according to contact time. The result obtained could provide new insights into the responses of microbial products from aerobic granular sludge with heavy metal treatment.

Detection of semi-volatile organic compounds (SVOCs) in surface water, soil, and groundwater in a chemical industrial park in Eastern China.

China is suffering from serious water and soil pollution, especially in the North China Plain. This work investigated semi-volatile organic compounds (SVOCs) in surface water, groundwater and soil within a chemical industrial park in Eastern China, for which the volatile organic compound (VOC) results have been previously reported. A total of 20 samples were collected from the field, and analyzed in the laboratory. A 100% detection frequency of SVOCs in samples from this chemical industrial park was observed (same as VOCs). Moreover, the detection frequency of 113 SVOCs in each sample reached 15.93, 12.39 and 20.35% for surface water, groundwater and soil, respectively. The most detected SVOCs in the park included N-containing SVOCs, polycyclic aromatic hydrocarbons, phthalates, organic pesticides and polychlorodiphenyls. The elevated detecting frequencies and concentration levels of SVOCs identified in the groundwater were attributed to the intensive chemical production activities in the park. In addition, the agricultural activities in the area might also have contributed to the SVOCs to the groundwater. The results of VOCs and SVOCs from this and previous studies suggest that the groundwater in this industrial park has been severely contaminated, and the contamination likely spreads beyond the park. Imminent hydrogeological assessments and remedial actions are warranted to eliminate the source and mitigate the potential plume expansion beyond the park boundary.

Distribution of volatile organic compounds (VOCs) in surface water, soil, and groundwater within a chemical industry park in Eastern China.

This paper focuses on the distribution of volatile organic compounds (VOCs) in the surface water, soil, and groundwater within a chemical industry park in Eastern China. At least one VOC was detected in each of the 20 sampling sites, and the maximum number of VOCs detected in the surface water, groundwater, and soil were 13, 16, and 14, respectively. Two of the 10 VOCs with elevated concentrations detected in surface water, groundwater, and soil were chloroform and 1,2-dichloroethane. The characteristics of VOCs, which include volatility, boiling point, and solubility, could significantly affect their distribution in surface water, soil, and groundwater. However, due to the direct discharging of chemical industry wastewater into surface water, higher concentrations of VOCs (except chloroform) were detected in surface water than in soil and groundwater. Fortunately, the higher volatility of VOCs prevents the VOCs from impacting groundwater, which helps to maintain a lower concentration of VOCs in the groundwater than in both surface water and soil. This is because pollutants with relatively higher boiling points and lower solubilities have higher detection frequencies in soil, and contaminants with relatively lower boiling points and higher solubilities have higher detection frequencies in water, notably in surface water.