Dual-Function Meta-Grating Based on Tunable Fano Resonance for Reflective Filter and Sensor Applications.

Localized surface plasmon resonance (LSPR)-based sensors exhibit enormous potential in the areas of medical diagnosis, food safety regulation and environmental monitoring. However, the broadband spectral lineshape of LSPR hampers the observation of wavelength shifts in sensing processes, thus preventing its widespread applications in sensors. Here, we describe an improved plasmonic sensor based on Fano resonances between LSPR and the Rayleigh anomaly (RA) in a metal-insulator-metal (MIM) meta-grating, which is composed of silver nanoshell array, an isolation grating mask and a continuous gold film. The MIM configuration offers more freedom to control the optical properties of LSPR, RA and the Fano resonance between them. Strong couplings between LSPR and RA formed a series of narrowband reflection peaks (with a linewidth of ~20 nm in full width at half maximum (FWHM) and a reflectivity nearing 100%) within an LSPR-based broadband extinction window in the experiment, making the meta-grating promising for applications of high-efficiency reflective filters. A Fano resonance that is well optimized between LSPR and RA by carefully adjusting the angles of incident light can switch such a nano-device to an improved biological/chemical sensor with a figure of merit (FOM) larger than 57 and capability of detecting the local refractive index changes caused by the bonding of target molecules on the surface of the nano-device. The figure of merit of the hybrid sensor in the detection of target molecules is 6 and 15 times higher than that of the simple RA- and LSPR-based sensors, respectively.

The synthesis of molecular imprinted chitosan-gels copolymerized with multiform functional monomers at three different temperatures and the recognition for the template ovalbumin.

In this paper, the molecularly imprinted polymers (MIPs) were prepared to recognize the template ovalbumin. The graft copolymerization was conducted based on chitosan (CS) and several types of functional monomers, while choosing N,N-methylenebisacrylamide as the cross-linking agent. The influence of the synthesis temperature was investigated. The effect of different kinds of functional monomers was compared and optimized. The properties of the obtained gels were characterized by using the FT-IR spectrometer, field emission scanning electron microscope (FESEM) and Zeta-meter. The adsorption isotherms of the imprinted chitosan gels were determined and well fitted by a Langmuir model. The maximum theoretical adsorption capacities (Q(max)) was determined to be 9.74 mg g(-1) for the MIP (CS-g-AAm) and 22.94 mg g(-1) for the MIP (CS-g-MAA). Several types of reference protein with different molecular weights and isoelectric points were selected to examine the selectivity of the chitosan based gels. The results implied that the charge effect and the shape memory were the critical factors affecting the rebinding process. Finally, the selectivity for the protein mixture adsorption was evaluated by the high efficiency liquid chromatography (HPLC) analysis choosing lysozyme as the competitive protein. These results demonstrate the potential selectivity of the prepared chitosan gels.

Development and characterization of molecularly imprinted polymers for the selective enrichment of podophyllotoxin from traditional Chinese medicines.

In the present work, microwave heating initiated precipitation polymerization was developed to prepare podophyllotoxin (PPT) molecularly imprinted polymers (MIPs), resulting in much shorter polymerization time and better particle morphology. Prior to the polymerization, ultraviolet and FTIR spectroscopy were used to study the interactions between PPT and the functional monomers. The synthesized parameters were respectively optimized and the optimal conditions for the efficient adsorption property were template: PPT, 1 mmol; functional monomer: acrylamide, 6 mmol; bi-crosslinker: ethylene glycol dimethacrylate, 20 mmol and divinylbenzene, 20 mmol; porogen: acetonitrile, 40 mL; initiator: azobisisobutyronitrile, 0.01mol L⁻¹; polymerization temperature: 60°C. FTIR spectroscopy, SEM and thermal analysis were used to characterize the MIPs. The results of the equilibrium rebinding experiments and the competitive adsorption experiments showed that these imprinted polymers exhibited good adsorption ability for the PPT. Scatchard analysis illustrated that two and one types of binding sites were generated in the MIPs and non-imprinted polymers (NIPs), respectively. Using the prepared MIPs as the solid phase extraction (SPE) sorbent, PPT was extracted selectively and efficiently from Dysosma versipellis, Sinopodophyllum hexandrum and Diphylleia sinensis. The regression equation was y=5.873×106x+17075.659 with the correlation coefficient of 0.9994 in the concentration range of 0.005-0.4 mg mL⁻¹. After washing and eluting the SPE column with methanol and MeOH/acetic acid solution (v/v, 9:1), the limits of detection were 0.12-0.18 µg mL⁻¹ and their recoveries were in the range of 89.5-91.1% with all RSDs lower than 3.7.

Application of ionic liquids in the microwave-assisted extraction of podophyllotoxin from Chinese herbal medicine.

A micelle-mediated extraction technique, i.e. ionic liquid-based microwave-assisted extraction (ILs-MAE) technique has been developed for the effective extraction of podophyllotoxin from three Chinese medicinal plants. Several operating parameters were successively optimized by single-factor and L(9) (3(4)) orthogonal array experiments. 1-Butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF(4)]), 1-decyl-3-methylimidazolium tetrafluoroborate ([demim][BF(4)]) and 1-allyl-3-methylimidazolium tetrafluoroborate ([amim][BF(4)]) were selected as the optimal surfactants for Dysosma versipellis, Sinopodophyllum hexandrum and Diphylleia sinensis, respectively. Compared with other extraction techniques, such as ionic liquids-based maceration extraction (ILs-ME), heat extraction (ILs-HE) and ultrasound-assisted extraction (ILs-UAE), the ILs-MAE technique not only took a shorter time but also afforded a higher extraction rate of podophyllotoxin from the herbs. Reversed phase high performance liquid chromatography was employed for the analysis of podophyllotoxin. The results showed that the linearity for analyzing podophyllotoxin in all three herbs was in the concentration range of 0.005-0.4 mg mL(-1) with the correlation coefficient between 0.9993 and 0.9996. LODs were 2.05-2.58 µg mL(-1) and RSDs of inter-day stability were less than 5.8%. Repeatability and intermediate precision were separately lower than 3.3% and 6.3%. The recoveries for podophyllotoxin extracted with the ILs-MAE technique were in the range of 97.1-102% and all RSDs were lower than 3.0%. Furthermore, the mechanism of ILs-MAE was preliminarily studied by means of kinetic mechanism, surface structures and chemical compositions of samples before and after different extraction techniques. On the basis of the destruction of herb surface microstructures and high solubility of ILs, the ILs-MAE technique eventually got the maximum yield value.