Effects of chitosan coating combined with thermal treatment on physicochemical properties, bacterial diversity and volatile flavor of braised duck meat during refrigerated storage.

The current study aimed to assess the impact of chitosan coating (0.005 g/mL) combined with thermal treatment (85 °C for 30 min) on tenderness, lipid and protein oxidation, bacterial diversity, and volatile flavor compounds in braised duck leg meat under vacuum packaging during refrigerated storage (4 °C for 15 days). The findings revealed that the three preserved treatments significantly increased tenderness from days 1 to 3. There was a substantial decrease from days 6 to 12 compared to the control, but no significant differences were observed on day 15. Compared with the control, the three preserved treatments reduced TBARS values by 25.8%-78.6% (from days 6 to 12) and total sulfhydryl concentrations by 24.1%-75.7% (from days 3 to 9). The combination treatment had the lowest values (carbonyl concentration, TVC, and TEC) compared to the chitosan coating and thermal treatment, indicating a significant synergistic effect. The proportions of the four primary spoilage organisms, Brochothrix, Weissella, Acinetobacter, and Pseudomonas, were 74.8%, 76.3%, 70.7%, and 49.7% in control, chitosan coating, thermal treatment, and combination treatment, respectively. The combination treatment produced the most volatile flavor compounds (38 compounds) at the end of storage (15 days). Hexanal, 1-nonanal, 1-octen-3-ol, and 2, 3-octanedione were the main volatile flavor compounds, and the average relative peak area was above 80. Therefore, chitosan coating and thermal treatment could be developed as synergistic methods to preserve braised duck meat.

Insights into the Protein Differentiation Mechanism between Jinhua Fatty Ham and Lean Ham through Label-Free Proteomics.

Jinhua lean ham (LH), a dry-cured ham made from the defatted hind legs of pigs, has become increasingly popular among consumers with health concerns. However, the influence of fat removal on the quality of Jinhua ham is still not fully understood. Therefore, a label-free proteomics strategy was used to explore the protein differential profile between Jinhua fatty ham (FH) and lean ham (LH). Results showed that 179 differential proteins (DPs) were detected, including 82 up-regulated and 97 down-regulated DPs in LH vs. FH, among which actin, myosin, tropomyosin, aspartate aminotransferase, pyruvate carboxylase, and glucose-6-phosphate isomerase were considered the key DPs. GO analysis suggested that DPs were mainly involved in binding, catalytic activity, cellular process, and metabolic process, among which catalytic activity was significantly up-regulated in LH. Moreover, the main KEGG-enriched pathways of FH focused on glycogen metabolism, mainly including the TCA cycle, pyruvate metabolism, and glycolysis/gluconeogenesis. However, amino acid metabolism and oxidative phosphorylation were the main metabolic pathways in LH. From the protein differentiation perspective, fat removal significantly promoted protein degradation, amino acid metabolism, and the oxidative phosphorylation process. These findings could help us to understand the effects of fat removal on the nutritional metabolism of Jinhua hams and provide theoretical supports for developing healthier low-fat meat products.

Breaking the Fundamental Limitations of Nanoscale Ferroelectric Characterization: Non-Contact Heterodyne Electrostrain Force Microscopy.

Perceiving nanoscale ferroelectric phenomena from real space is of great importance for elucidating underlying ferroelectric physics. During the past decades, nanoscale ferroelectric characterization has mainly relied on the Piezoresponse Force Microscopy (PFM) invented in 1992, however, the fundamental limitations of PFM have made the nanoscale ferroelectric studies encounter significant bottlenecks. In this study, a high-resolution non-contact ferroelectric measurement, named Non-Contact Heterodyne Electrostrain Force Microscopy (NC-HEsFM), is introduced. It is demonstrated that NC-HEsFM can operate on multiple eigenmodes to perform ideal high-resolution ferroelectric domain mapping, standard ferroelectric hysteresis loop measurement, and controllable domain manipulation. By using a quartz tuning fork (QTF) sensor, multi-frequency operation, and heterodyne detection schemes, NC-HEsFM achieves a real non-contact yet non-destructive ferroelectric characterization with negligible electrostatic force effect and hence breaks the fundamental limitations of the conventional PFM. It is believed that NC-HEsFM can be extensively used in various ferroelectric or piezoelectric studies with providing substantially improved characterization performance. Meanwhile, the QTF-based force detection makes NC-HEsFM highly compatible for high-vacuum and low-temperature environments, providing ideal conditions for investigating the intrinsic ferroelectric phenomena with the possibility of achieving an atomically resolved ferroelectric characterization.

The Value of CTA Based on Gold Nanorod Contrast Agent in Coronary Artery Diagnosis and Plaque Property Analysis.

Coronary CT angiography (CTA) with the characteristics of noninvasive and simple operation is widely used in the diagnosis of coronary artery stenosis. The choice of contrast agent exerts an important impact on the imaging quality of CTA. Conventional iodine contrast agents are easily excreted by the kidneys, from which the imaging window is short, and the imaging quality is poor. Metal nanomaterials have unique optical properties and have broad application prospects in imaging. Our aim is to explore the value of gold nanorod contrast agent in the diagnosis of coronary heart disease. A gold nanorod suspension was first prepared, and the prepared gold nanorod was uniform and had good dispersibility. It can be seen from the light absorption curve that there are two obvious peaks on the UV absorption peak of the gold nanorods. The gold nanorods were cultured in different solutions, and it was found that the particle size of the gold nanorods did not change significantly within 72 hours, indicating that the prepared gold nanorods had good stability. When observing the damage degree of mouse kidney tissue, it was shown that the damage degree of gold nanorod contrast agent to mouse kidney tissue was less than that of iodine contrast agent. The above results indicate that the gold nanorod contrast agent has good stability and safety. Therefore, our study demonstrated that the gold nanorod contrast agent has high value in the diagnosis of coronary arteries and the analysis of plaque properties.

The Efficacy of 18F-FDG PET/CT and Superparamagnetic Nanoferric Oxide MRI in the Diagnosis of Lung Cancer and the Value of 18F-FDG PET/CT in the Prediction of Lymph Node Metastasis.

In China, lung cancer is one of the leading causes of death among residents. Early diagnosis is of great significance for early interventional treatment and prolonging survival. PET/CT uses positron radiopharmaceuticals to observe the physiological and biochemical changes of the drug and its metabolites in the body and finally diagnoses the disease. 18F-FDG is a commonly used imaging agent, but its short isotopic half-life limits clinical high-throughput testing. This study retrospectively analyzed the imaging material of 100 lung cancer patients pathologically confirmed. Patients with lymph node metastasis were classified into the LM group (n = 30 cases), and those with no lymph node metastasis were classified into the NLM group (n = 70 cases). The results showed that MRI of superparamagnetic nanoferric oxide was better than diagnosis of lung cancer by the 18F-FDG PET/CT and had a high predictive power for lymph node metastasis. These turned out to be high-value lung cancer diagnosis of superparamagnetic nanoferric oxide MRI and high-capacity lymph node metastasis prediction of 18F-FDG PET/CT, which were worthy of implementation.

The expression of miRNA-216b is negatively correlated with 18F-FDG uptake in non-small cell lung cancer.

BACKGROUND: This study aimed to investigate the correlation between miRNA-216b expression in patients with non-small cell lung cancer (NSCLC) and 18F-fluorodeoxyglucose (FDG) uptake by PET/CT and to explore the clinical application value of 18F-FDG PET/CT in miRNA-216b based on therapy for NSCLC. METHODS: Eighty patients with NSCLC and 40 healthy subjects were enrolled in our study. The SUVmax of the lesion area by PET/CT imaging was calculated. SUVmax represented the highest concentration of 18F-FDG in the lesion. The expression of miRNA-216b in the plasma and fiber bronchoscopic puncture of NSCLC patients was detected by RT qPCR. Then Pearson correlation analysis was used to analyze the correlation between miRNA-216b expression and 18F-FDG uptake in patients with different types of NSCLC. RESULTS: Compared with healthy subjects, SUVmax of early adenocarcinoma and advanced adenocarcinoma were increased. Compared with healthy subjects, SUVmax of early squamous and advanced squamous were increased. And the SUVmax content of advanced adenocarcinoma and squamous cell carcinoma was higher than that of early adenocarcinoma and squamous cell carcinoma. Compared with healthy subjects, the expression of miRNA-216b in the plasma of patients with early and advanced adenocarcinoma was reduced, and the expression of miRNA-216b in the plasma of patients with early and advanced squamous cell carcinoma was reduced. Compared with adjacent tissues, the expression of miRNA-216b in early adenocarcinoma tissues and advanced adenocarcinoma tissues was reduced, and the expression in early squamous cell carcinoma and advanced squamous cell carcinoma was reduced. Pearson correlation analysis showed a negative correlation between SUVmax and miRNA-216b (plasma and tissue) in patients with four types of NSCLC. CONCLUSION: miRNA-216b expression was negatively correlated with 18F-FDG uptake in NSCLC. miRNA-216b could be used for the classification and staging of non-small cell lung cancer. 18F-FDG PET/CT may be used to evaluate the therapeutic response in application of miRNA-216b-based cancer treatment.

Nanoscale Ferroelectric Characterization with Heterodyne Megasonic Piezoresponse Force Microscopy.

Piezoresponse force microscopy (PFM), as a powerful nanoscale characterization technique, has been extensively utilized to elucidate diverse underlying physics of ferroelectricity. However, intensive studies of conventional PFM have revealed a growing number of concerns and limitations which are largely challenging its validity and applications. In this study, an advanced PFM technique is reported, namely heterodyne megasonic piezoresponse force microscopy (HM-PFM), which uses 106 to 108 Hz high-frequency excitation and heterodyne method to measure the piezoelectric strain at nanoscale. It is found that HM-PFM can unambiguously provide standard ferroelectric domain and hysteresis loop measurements, and an effective domain characterization with excitation frequency up to ≈110 MHz is demonstrated. Most importantly, owing to the high-frequency and heterodyne scheme, the contributions from both electrostatic force and electrochemical strain can be significantly minimized in HM-PFM. Furthermore, a special measurement of difference-frequency piezoresponse frequency spectrum (DFPFS) is developed on HM-PFM and a distinct DFPFS characteristic is observed on the materials with piezoelectricity. By performing DFPFS measurement, a truly existed but very weak electromechanical coupling in CH3NH3PbI3 perovskite is revealed. It is believed that HM-PFM can be an excellent candidate for the ferroelectric or piezoelectric studies where conventional PFM results are highly controversial.

Highly Controllable and Silicon-Compatible Ferroelectric Photovoltaic Synapses for Neuromorphic Computing.

Ferroelectric synapses using polarization switching (a purely electronic switching process) to induce analog conductance change have attracted considerable interest. Here, we propose ferroelectric photovoltaic (FePV) synapses that use polarization-controlled photocurrent as the readout and thus have no limitations on the forms and thicknesses of the constituent ferroelectric and electrode materials. This not only makes FePV synapses easy to fabricate but also reduces the depolarization effect and hence enhances the polarization controllability. As a proof-of-concept implementation, a Pt/Pb(Zr0.2Ti0.8)O3/LaNiO3 FePV synapse is facilely grown on a silicon substrate, which demonstrates continuous photovoltaic response modulation with good controllability (small nonlinearity and write noise) enabled by gradual polarization switching. Using photovoltaic response as synaptic weight, this device exhibits versatile synaptic functions including long-term potentiation/depression and spike-timing-dependent plasticity. A simulated FePV synapse-based neural network achieves high accuracies (>93%) for image recognition. This study paves a new way toward highly controllable and silicon-compatible synapses for neuromorphic computing.

DPPIV promotes endometrial carcinoma cell proliferation, invasion and tumorigenesis.

Dipeptidyl peptidase IV (DPPIV), also known as CD26, is a 110-kDa cell surface glycoprotein expressed in various tissues. DPPIV reportedly plays a direct role in the progression of several human malignancies. DPPIV specific inhibitors are employed as antidiabetics and could potentially be repurposed to enhance anti-tumor immunotherapies. In the present study, we investigated the correlation between DPPIV expression and tumor progression in endometrial carcinoma (EC). DPPIV overexpression altered cell morphology and stimulated cell proliferation, invasion and tumorigenesis in vitro and in vivo. These effects were abrogated by DPPIV knockdown or pharmacological inhibition using sitagliptin. DPPIV overexpression increased hypoxia-inducible factor 1a (HIF-1a) and vascular endothelial growth factor A (VEGFA) expression to promote HIF-1a-VEGFA signaling. Our results indicated that DPPIV accelerated endometrial carcinoma progression and that sitagliptin may be an effective anti-EC therapeutic.