Single-Atom Cr-N4 Sites with High Oxophilicity Interfaced with Pt Atomic Clusters for Practical Alkaline Hydrogen Evolution Catalysis.

Although dispersing Pt atomic clusters (ACs) on a conducting support is a promising way to minimize the Pt amount required in hydrogen evolution reaction (HER), the catalytic mass activity and durability of Pt ACs are often unsatisfactory for alkaline HER due to their unfavorable water dissociation and challenges in stabilizing them against agglomeration and detachment. Herein, we report a class of single-atom Cr-N4 sites with high oxophilicity interfaced with Pt ACs on mesoporous carbon for achieving a highly active and stable alkaline HER in an anion-exchange-membrane water electrolyzer (AEMWE). The as-made catalyst achieves the highest reported Pt mass activity (37.6 times higher than commercial Pt/C) and outstanding operational stability. Experimental and theoretical studies elucidate that the formation of a unique Pt-Cr quasi-covalent bonding interaction at the interface of Cr-N4 sites and Pt ACs effectively suppresses the migration and thermal vibration of Pt atoms to stabilize Pt ACs and contributes to the greatly enhanced catalytic stability. Moreover, oxophilic Cr-N4 sites adjacent to Pt ACs with favorable adsorption of hydroxyl species facilitate nearly barrierless water dissociation and thus enhance the HER activity. An AEMWE using this catalyst (with only 50 µgPt cm-2) can operate stably at an industrial-level current density of 500 mA cm-2 at 1.8 V for >100 h with a small degradation rate of 90 µV h-1.

Restraining Interfacial Cu2+ by using Amorphous SnO2 as Sacrificial Protection Boosts CO2 Electroreduction.

The electrochemical carbon dioxide reduction reaction (CO2 RR) to formate is of great interest in the field of electrochemical energy. Cu-based material is an appealing electrocatalyst for the CO2 RR. However, retaining Cu2+ under the high cathodic potential of CO2 RR remains a great challenge, leading to low electrocatalytic selectivity, activity, and stability. Herein, inspired by corrosion science, a sacrificial protection strategy to stabilize interfacial crystalline CuO through embedding of active amorphous SnO2 (c-CuO/a-SnO2 ) is reported, which greatly boosts the electrocatalytic sensitivity, activity, and stability for CO2 RR to formate. The as-made hybrid catalyst can achieve superior high selectivity for CO2 RR to formate with a remarkable Faradaic efficiency (FE) of 96.7%, and a superhigh current density of over 1 A cm-2 that far outperforms industrial benchmarks (FE > 90%, current density > 300 mA cm-2 ). In situ X-ray absorption spectroscopy (XAS) and X-ray diffractionexperimental and theoretical calculation results reveal that the broadened s-orbital in interfacial a-SnO2 offers the lower orbital for extra electrons than Cu2+ , which can effectively retain nearby Cu2+ , and the high active interface significantly lowers the energy barrier of the limited step (* CO2 → * HCOO) and enhances the selectivity and activity for CO2 RR to formate.

Cooperative Rh-O5/Ni(Fe) Site for Efficient Biomass Upgrading Coupled with H2 Production.

Designing efficient and durable bifunctional catalysts for 5-hydroxymethylfurfural (HMF) oxidation reaction (HMFOR) and hydrogen evolution reaction (HER) is desirable for the co-production of biomass-upgraded chemicals and sustainable hydrogen, which is limited by the competitive adsorption of hydroxyl species (OHads) and HMF molecules. Here, we report a class of Rh-O5/Ni(Fe) atomic site on nanoporous mesh-type layered double hydroxides with atomic-scale cooperative adsorption centers for highly active and stable alkaline HMFOR and HER catalysis. A low cell voltage of 1.48 V is required to achieve 100 mA cm-2 in an integrated electrolysis system along with excellent stability (>100 h). Operando infrared and X-ray absorption spectroscopic probes unveil that HMF molecules are selectively adsorbed and activated over the single-atom Rh sites and oxidized by in situ-formed electrophilic OHads species on neighboring Ni sites. Theoretical studies further demonstrate that the strong d-d orbital coupling interactions between atomic-level Rh and surrounding Ni atoms in the special Rh-O5/Ni(Fe) structure can greatly facilitate surface electronic exchange-and-transfer capabilities with the adsorbates (OHads and HMF molecules) and intermediates for efficient HMFOR and HER. We also reveal that the Fe sites in Rh-O5/Ni(Fe) structure can promote the electrocatalytic stability of the catalyst. Our findings provide new insights into catalyst design for complex reactions involving competitive adsorptions of multiple intermediates.

Van der Waals Interaction-Driven Self-Assembly of V2O5 Nanoplates and MXene for High-Performing Zinc-Ion Batteries by Suppressing Vanadium Dissolution.

Aqueous zinc-ion batteries (AZIBs) are attractive energy storage devices that benefit from improved safety and negligible environmental impact. The V2O5-based cathodes are highly promising, but the dissolution of vanadium is one of the major challenges in realizing their stable performance in AZIBs. Herein, we design a Ti3C2Tx MXene layer on the surface of V2O5 nanoplates (VPMX) through a van der Waals self-assembly approach for suppressing vanadium dissolution during an electrochemical process for greatly boosting the zinc-ion storage performance. Unlike conventional V2O5/C composites, we demonstrate that the VPMX hybrids offer three distinguishable features for achieving high-performance AZIBs: (i) the MXene layer on cathode surface maintains structural integrity and suppresses V dissolution; (ii) the heterointerface between V2O5 and MXene enables improved host electrochemical kinetics; (iii) reduced electrostatic repulsion exists among host layers owing to the lubricating water molecules in the VPMX cathode, facilitating interfacial Zn2+ diffusion. As a result, the as-made VPMX cathode shows a long-term cycling stability over 5000 cycles, surpassing other reported V2O5-based materials. Especially, we find that the heterointerface between V2O5 and MXene and lubricated water molecules in the host can achieve an enhanced rate capability (243.6 mAh g-1 at 5.0 A g-1) for AZIBs.

Anti-dissolution Pt single site with Pt(OH)(O3)/Co(P) coordination for efficient alkaline water splitting electrolyzer.

As the most well-known electrocatalyst for cathodic hydrogen evolution in water splitting electrolyzers, platinum is unfortunately inefficient for anodic oxygen evolution due to its over-binding with oxygen species and excessive dissolution in oxidative environment. Herein we show that single Pt atoms dispersed in cobalt hydrogen phosphate with an unique Pt(OH)(O3)/Co(P) coordination can achieve remarkable catalytic activity and stability for oxygen evolution. The catalyst yields a high turnover frequency (35.1 ± 5.2 s-1) and mass activity (69.5 ± 10.3 A mg-1) at an overpotential of 300 mV and excellent stability. Mechanistic studies elucidate that the superior catalytic performance of isolated Pt atoms herein stems from optimal binding energies of oxygen intermediate and also their strong electronic coupling with neighboring Co atoms that suppresses the formation of soluble Ptx>4 species. Alkaline water electrolyzers assembled with an ultralow Pt loading realizes an industrial-level current density of 1 A cm-2 at 1.8 volts with a high durability.

Electrochemical ammonia synthesis via nitrate reduction on Fe single atom catalyst.

Electrochemically converting nitrate, a widespread water pollutant, back to valuable ammonia is a green and delocalized route for ammonia synthesis, and can be an appealing and supplementary alternative to the Haber-Bosch process. However, as there are other nitrate reduction pathways present, selectively guiding the reaction pathway towards ammonia is currently challenged by the lack of efficient catalysts. Here we report a selective and active nitrate reduction to ammonia on Fe single atom catalyst, with a maximal ammonia Faradaic efficiency of ~ 75% and a yield rate of up to ~ 20,000 µg h-1 mgcat.-1 (0.46 mmol h-1 cm-2). Our Fe single atom catalyst can effectively prevent the N-N coupling step required for N2 due to the lack of neighboring metal sites, promoting ammonia product selectivity. Density functional theory calculations reveal the reaction mechanisms and the potential limiting steps for nitrate reduction on atomically dispersed Fe sites.