Narrow linewidth laser based on a sidewall grating active distributed Bragg reflector.

We demonstrated a narrow linewidth semiconductor laser based on a deep-etched sidewall grating active distributed Bragg reflector (SG-ADBR). The coupling coefficients and reflectance were numerically simulated for deep-etched fifth-order SG-ADBR, and a reflectance of 0.86 with a bandwidth of 1.04 nm was obtained by the finite element method for a 500-period SG-ADBR. Then the fifth-order SG-ADBR lasers were fabricated using projection i-line lithography processes. Single-mode lasing at 1537.9 nm was obtained with a high side-mode suppression ratio (SMSR) of 65 dB, and a continuous tuning range of 10.3 nm was verified with SMSRs greater than 53 dB. Furthermore, the frequency noise power spectral density was characterized, from which a Lorentzian linewidth of 288 kHz was obtained.

Optical time domain reflectometry based on a self-chaotic circular-sided microcavity laser.

A self-chaotic circular-sided square microcavity laser, with a chaos bandwidth of 12.9 GHz and a flatness of ±3d B, was applied in optical time domain reflectometry (OTDR). Using the broadband chaos laser, we demonstrated a range resolution of 4.5 mm and a 25-km detection distance experimentally. The solitary wide-bandwidth microcavity chaos laser, without the extra correlation peaks in optical feedback chaotic lasers, has shown potential advantages for correlation OTDR in practical application.

Dual-modal radiomics nomogram based on contrast-enhanced ultrasound to improve differential diagnostic accuracy and reduce unnecessary biopsy rate in ACR TI-RADS 4-5 thyroid nodules.

BACKGROUND: American College of Radiology (ACR) Thyroid Imaging Reporting and Data System (TI-RADS, TR) 4 and 5 thyroid nodules (TNs) demonstrate much more complicated and overlapping risk characteristics than TR1-3 and have a rather wide range of malignancy possibilities (> 5%), which may cause overdiagnosis or misdiagnosis. This study was designed to establish and validate a dual-modal ultrasound (US) radiomics nomogram integrating B-mode ultrasound (BMUS) and contrast-enhanced ultrasound (CEUS) imaging to improve differential diagnostic accuracy and reduce unnecessary fine needle aspiration biopsy (FNAB) rates in TR 4-5 TNs. METHODS: A retrospective dataset of 312 pathologically confirmed TR4-5 TNs from 269 patients was collected for our study. Data were randomly divided into a training dataset of 219 TNs and a validation dataset of 93 TNs. Radiomics characteristics were derived from the BMUS and CEUS images. After feature reduction, the BMUS and CEUS radiomics scores (Rad-score) were built. A multivariate logistic regression analysis was conducted incorporating both Rad-scores and clinical/US data, and a radiomics nomogram was subsequently developed. The performance of the radiomics nomogram was evaluated using calibration, discrimination, and clinical usefulness, and the unnecessary FNAB rate was also calculated. RESULTS: BMUS Rad-score, CEUS Rad-score, age, shape, margin, and enhancement direction were significant independent predictors associated with malignant TR4-5 TNs. The radiomics nomogram involving the six variables exhibited excellent calibration and discrimination in the training and validation cohorts, with an AUC of 0.873 (95% CI, 0.821-0.925) and 0.851 (95% CI, 0.764-0.938), respectively. The marked improvements in the net reclassification index and integrated discriminatory improvement suggested that the BMUS and CEUS Rad-scores could be valuable indicators for distinguishing benign from malignant TR4-5 TNs. Decision curve analysis demonstrated that our developed radiomics nomogram was an instrumental tool for clinical decision-making. Using the radiomics nomogram, the unnecessary FNAB rate decreased from 35.3 to 14.5% in the training cohort and from 41.5 to 17.7% in the validation cohorts compared with ACR TI-RADS. CONCLUSION: The dual-modal US radiomics nomogram revealed superior discrimination accuracy and considerably decreased unnecessary FNAB rates in benign and malignant TR4-5 TNs. It could guide further examination or treatment options.

Feedback insensitivity in a self-chaotic microcavity laser.

Insensitivity to external optical feedback is experimentally demonstrated in a self-chaotic deformed square microcavity laser for the first time, to the best of our knowledge. Both the optical and radio frequency (RF) spectra of the microlaser remain unaffected for external optical feedback with feedback strength as high as 9.9 dB. In addition, the autocorrelation function curve exhibits no time-delayed peaks. The insensitivity makes the self-chaotic microcavity laser promising for applications in feedback-insensitive optical sources.

Self-pulsing and dual-mode lasing in a square microcavity semiconductor laser.

Self-pulsing and dual-mode lasing in a square microcavity semiconductor laser are studied experimentally. Self-sustained pulses originating from undamped relaxation oscillation induced by a two-mode interaction are obtained, as the injection current is slightly above the laser threshold. A repetition frequency of 4.4 GHz and a pulse width of 30-40 ps are obtained at a current of 8 mA. The laser switches to continuous-wave operation when the injection current is higher than a certain value, and dual-mode lasing with 30.7 GHz at 16 mA and 10.7 GHz at 27 mA are observed in the lasing spectra. Furthermore, the relative intensity noise spectra are presented to reveal the relationship between the lasing states and the dynamics induced by relaxation oscillation and mode beating.

Analysis of genetic diversity and genetic structure of Qinchuan cattle conservation population using whole-genome resequencing.

In the conservation of livestock and poultry resources, population genetic diversity and genetic structure of the conservation population are important factors affecting the effectiveness of conservation. In this study, whole-genome resequencing technology was used to detect genomic variation in 100 Qinchuan cattle (30 bulls and 70 cows). By analyzing population genetic diversity, runs of homozygosity (ROH) distribution features, kinship relationships, and family structure, the conservation effectiveness of Qinchuan cattle was comprehensively evaluated. The results showed that a total of 20,968,017 high-quality SNPs were detected in 100 Qinchuan cattle, the average minimum allele frequency was 0.191±0.124, the average polymorphic information content was 0.279±0.131, and the average observed heterozygosity was 0.275±0.131, the average expected heterozygosity is 0.279±0.131, indicating that the genetic diversity of the Qinchuan cattle conservation population is relatively rich. The average identity by state (IBS) distance of the Qinchuan conservation population was 0.243±0.020, with a value of 0.242±0.021 for the bulls. The results of the kinship G-matrix were consistent with the results of the IBS distance matrix, both showing that some individuals in the conservation population had close kinship. A total of 8258 genomic ROH were detected in 100 Qinchuan cattle, with a total length of 9.64 GB. The average length of ROH fragments was 1.167±1.203 Mb, 69.35% of the ROH were short ROH with a length of 0.5~1 Mb, and the average total length of ROH per individual was 96.40 Mb. The average inbreeding coefficient based on ROH was 0.039±0.039, with a value of 0.044±0.035 for the bulls, indicating that some bulls had a certain degree of inbreeding accumulation. The results of the phylogenetic tree combined with kinship analysis showed that the individuals in the Qinchuan cattle conservation population could be divided into eight families, including seven families with bulls and one family without bulls. This study demonstrated that the genetic diversity of the Qinchuan conservation population is relatively rich, with no significant inbreeding accumulation, but there is a risk of inbreeding among some individuals. Therefore, it is necessary to strengthen selection and mating to ensure the sustainable development of Qinchuan cattle resources.

Unidirectional light emission in a deformed circular-side triangular microresonator.

A waveguide-connected deformed circular-side triangular microresonator is proposed and fabricated. Room temperature unidirectional light emission is experimentally demonstrated in the far-field pattern with a divergence angle of 38°. Single mode lasing at 1545.4 nm is realized at an injection current of 12 mA. The emission pattern changes drastically upon the binding of a nanoparticle with radius down to several nanometers, predicting applications in electrically pumped, cost-effective, portable and highly sensitive far-field detection of nanoparticles.

Narrow linewidth optical frequency comb based on a directly modulated microcavity laser with optical feedback.

A narrow linewidth optical frequency comb (OFC) based on a directly modulated microcavity laser with external optical feedback is investigated numerically and demonstrated experimentally. Based on the numerical simulations with rate equations, the evolution of the optical and electrical spectra is presented for the direct-modulated microcavity laser with increased feedback strength, and the linewidth property is improved at suitable feedback conditions. The simulation results also show good robustness for the generated OFC in terms of feedback strength and phase. Moreover, the OFC generation experiment is performed by combining with the dual-loop feedback structure to suppress the side mode, and an OFC with a side-mode suppression ratio of 31 dB is realized. Thanks to the high electro-optical response of the microcavity laser, a 15-tone OFC with a frequency interval of 10 GHz is obtained. Finally, the linewidth of each comb tooth is measured to be around 7 kHz under the feedback power of 47 µW, which indicates an enormous compression of approximately 2000 times compared with the free-running continuous-wave microcavity laser.

Wideband multiwavelength Brillouin fiber laser with switchable channel spacing.

A multiwavelength Brillouin fiber laser (MBFL) with a switchable channel spacing is demonstrated using a 1.55-µm single-mode AlGaInAs/InP hybrid square-rectangular laser as a seeding source. The scheme employs a highly nonlinear fiber loop with a feedback path to generate a 10-GHz-spacing MBFL. Then, assisted by a tunable optical bandpass filter, MBFLs with spacing from 20 GHz to 100 GHz at a step of 10 GHz are generated in another highly nonlinear fiber loop based on the cavity-enhanced four-wave mixing. More than 60 lasing lines with an optical signal-to-noise ratio over 10 dB are obtained successfully in all the switchable spacings. The total output power and the channel spacing of the MBFLs are proved to be stable.

Highly efficient waveguide-coupled output in asymmetrically deformed square cavity microlasers.

We propose and demonstrate deformed square cavity microlasers for realizing highly efficient output from a connected waveguide. The square cavities are deformed asymmetrically by replacing two adjacent flat sides with circular arcs to manipulate the ray dynamics and couple the light to the connected waveguide. The numerical simulations show that the resonant light can efficiently couple to the fundamental mode of the multi-mode waveguide by carefully designing the deformation parameter utilizing global chaos ray dynamics and internal mode coupling. An enhancement of approximately six times in the output power is realized in the experiment compared to the non-deformed square cavity microlasers, while the lasing thresholds are reduced by about 20%. The measured far-field pattern shows highly unidirectional emission agreeing well with the simulation, which confirms the feasibility of the deformed square cavity microlasers for practical applications.

Association between copy number variation of SERPINA3-1 gene and growth traits in Chinese cattle.

Serpin peptidase inhibitor, clade A (alpha-1 antiproteinase, antitrypsin), member 3 (SERPINA3) belongs to the serine protease inhibitor family A subtype, and contains 8 genes from SERPINA3-1 to SERPINA3-8. Although the regulatory effects of these 8 genes have been revealed one by one in recent years, the related effects of SERPINA3-1 gene on cattle growth is still unclear. This study used quantitative Real time PCR (qPCR) to detect the type of copy number variation (CNV) of SERPINA3-1 gene in a total of 542 Chinese cattle, and expression of SERPINA3-1 gene in different tissues of Qinchuan cattles (adult) on mRNA level. Then association analysis was conducted between the detection results and cattle growth traits. The results showed that the Duplication type in SERPINA3-1 gene performed better on the growth traits and the CNV was significantly correlated with multiple growth traits (p < 0.05). In addition, SERPINA3-1 gene has different expression conditions in different tissues, results showed that SERPINA3-1 gene has a low expression in muscle. In conclusion, we speculate that the SERPINA3-1 gene can be used as a molecular marker and the result of this study could be a basic material for candidate functional genes for beef cattle growth and development.

In order to detect the gene expression diversification of the SERPINA3-1 gene, blood samples were collected from five Chinese cattle breeds, we detected related signal and made an associated analyze with cattle growth traits. We determined the copy number variation distribution of the SERPINA3-1 gene in cattle populations and found that the SERPINA3-1 gene has a certain promoting effect on the growth and development of Chinese cattle. For example, Pinan cattle with Duplication type copy number have a better performance on growth traits. This study has enriched the candidate genes of Chinese cattle molecular breeding and provided basic data for Chinese cattle breeding.

Nonlinear dynamics of a semiconductor microcavity laser subject to frequency comb injection.

The nonlinear dynamical behaviors of a semiconductor microcavity laser with frequency comb injection have been experimentally and numerically investigated. The microcavity laser is harmonically locked to a unit fraction of the comb spacing due to the undamped relaxation oscillation at certain conditions, creating additional comb lines with reduced frequency spacing. The stability maps indicating various locking states are obtained based on rate equations, which demonstrates that the locking regions are closely related to the relaxation oscillation. Moreover, the microcavity laser with comb injection leads to spectral broadening of the original comb and the number of comb lines raises from 3 to 13. Owing to the large modulation bandwidth of the microcavity laser, the comb lines and the frequency spacing can be tailored over a wide range by varying the injection parameters.

Single-mode lasing in an AlGaInAs/InP dual-port square microresonator.

Mode selection is crucial to achieving stable single-mode lasing in microlasers. Here, we demonstrate experimentally a dual-port square microresonator for single-mode lasing with a side-mode-suppression ratio (SMSR) exceeding 40 dB. By connecting waveguides at two opposite vertices, the quality factor for the antisymmetric mode (ASM) is much higher than that of the symmetric mode (SM), enabling single-mode lasing. Furthermore, far-field interference patterns similar to Young's two-slit interference are observed. This microlaser is capable of providing two optical sources simultaneously for optical signal processing in high-density integrated photonic circuits.

Chaotic microlasers caused by internal mode interaction for random number generation.

Chaotic semiconductor lasers have been widely investigated for generating unpredictable random numbers, especially for lasers with external optical feedback. Nevertheless, chaotic lasers under external feedback are hindered by external feedback loop time, which causes correlation peaks for chaotic output. Here, we demonstrate the first self-chaotic microlaser based on internal mode interaction for a dual-mode microcavity laser, and realize random number generation using the self-chaotic laser output. By adjusting mode frequency interval close to the intrinsic relaxation oscillation frequency, nonlinear dynamics including self-chaos and period-oscillations are predicted and realized numerically and experimentally due to internal mode interaction. The internal mode interaction and corresponding carrier spatial oscillations pave the way of mode engineering for nonlinear dynamics in a solitary laser. Our findings provide a novel and easy method to create controllable and robust optical chaos for high-speed random number generation.

[Distribution of phosphorus fractions in soil aggregates in Chinese fir plantations with different stand ages]. / ä¸åŒæž—é¾„æ‰æœ¨äººå·¥æž—åœŸå£¤å›¢èšä½“ç£·ç´ åˆ†å¸ƒç‰¹å¾.

Exploring the distribution of phosphorus (P) fractionsin soil aggregates is helpful to improve soil P availa-bility during Chinese fir planting. In this study, soil samples were collected in the 0-20 cm soil layer from Chinese fir plantations with different stand ages (9 a, 17 a, and 26 a) and one nearby abandoned land (CK) in Rongshui County, Guangxi, China. Soil aggregates were classified into >2 mm, 1-2 mm, 0.25-1 mm, and <0.25 mm size classes through dry-sieving process, and then soil P fractions in different sized aggregates were measured. These results showed that: 1) The composition of soil aggregates showed significant difference among different stand ages. As the major aggregate fractions in soil, the contents of >2 mm aggregates increased firstly and then decreased over time, and peaked in the 17 a Chinese fir plantation. The changes of soil mean weight diameter (MWD) and geometric mean diameter (GMD) during Chinese fir planting were the same as the content of >2 mm aggregates. 2) Soil total P, inorganic P, and organic P contents did not differ among different sized aggregates. However, soil available P content was mainly distributed in >2 mm aggregates with a range of 1.23-7.33 mg·kg-1. Compared with CK, soil total P, available P, and inorganic P contents were significantly higher in Chinese fir plantations, and their contents increased firstly and then decreased over time. Soil total P (322.40 mg·kg-1) and available P (7.33 mg·kg-1) contents were the highest in the 9 a plantations, and soil inorganic P content (114.05 mg·kg-1) was the highest in the 17 a plantation. Moreover, soil organic P content showed an order of 9 a > 26 a >17 a > CK, with the highest content (210.00 mg·kg-1) in the 9 a plantation. 3) The distribution of P stock in soil aggregates was related to the contents of different sized aggregates, with >2 mm aggregates having the highest P stock. Except for organic P, soil P stock increased firstly and then decreased with the increases of stand age. In conclusion, Chinese fir planting was helpful to improve soil aggregate stability and to promote the increase of soil P level before the stand age of 17 a. However, Chinese fir planting could result in the degradation of soil aggregates and in the decrease of soil P level after 17 a. The formation and stabilization of >2 mm aggregates played an important role in the maintenance of soil quality and soil P supply level after 17 a Chinese fir planting.

Exosomal RNAs: Novel Potential Biomarkers for Diseases-A Review.

Exosomes are a subset of nano-sized extracellular vesicles originating from endosomes. Exosomes mediate cell-to-cell communication with their cargos, which includes mRNAs, miRNAs, lncRNAs, and circRNAs. Exosomal RNAs have cell specificity and reflect the conditions of their donor cells. Notably, their detection in biofluids can be used as a diagnostic marker for various diseases. Exosomal RNAs are ideal biomarkers because their surrounding membranes confer stability and they are detectable in almost all biofluids, which helps to reduce trauma and avoid invasive examinations. However, knowledge of exosomal biomarkers remains scarce. The present review summarizes the biogenesis, secretion, and uptake of exosomes, the current researches exploring exosomal mRNAs, miRNAs, lncRNAs, and circRNAs as potential biomarkers for the diagnosis of human diseases, as well as recent techniques of exosome isolation.

Wideband chaotic tri-mode microlasers with optical feedback.

A tri-mode micro-square laser under optical feedback is proposed and demonstrated to generate chaos with the broadband flat microwave spectrum. By adjusting lasing mode intensities, frequency intervals, and optical feedback strength, we can enhance the chaotic bandwidth significantly. The existence of two mode-beating peaks makes the flat bandwidth much larger than the relaxation oscillation frequency. Effective bandwidth of 35.3 GHz is experimentally achieved with the flatness of 8.3 dB from the chaotic output spectrum of the tri-mode mode laser under optical feedback.

Copy number variations of TOP2B gene are associated with growth traits in Chinese sheep breeds.

Copy number variations are primary source of genetic variations, which are associated with essential traits in many organisms. During recent years, there have been numerous research works that reveal functions of CNV. However, these studies provide only several references about copy number variations in the sheep genome. In this study, we examined the copy number variation of the TOP2B gene in three Chinese sheep breeds (Chaka sheep, Hu sheep, Small-tailed Han sheep) and performed correlation analysis with growth traits, to detect the influence of CNVs. TOP2B copy numbers were divided into three distribution groups (gain, median, loss) in three Chinese sheep breeds. The distribution amount of copy number < 2 of TOP2B CNVs was dominant in all sheep breeds. The statistical analysis showed that TOP2B CNV had a significant effect on body length in CK sheep (p < 0.05), and effects on chest circumference, canon circumference (p < 0.05) in HU sheep. CNVs in STH sheep breed were relevant to chest circumference and height of hip cross (p < 0.05). These results confirmed the relationship between CNV of TOP2B gene and growth traits in three sheep breeds, and provide a reliable reference for sheep breeding.

Development of a random forest model for hypotension prediction after anesthesia induction for cardiac surgery.

BACKGROUND: Hypotension after the induction of anesthesia is known to be associated with various adverse events. The involvement of a series of factors makes the prediction of hypotension during anesthesia quite challenging. AIM: To explore the ability and effectiveness of a random forest (RF) model in the prediction of post-induction hypotension (PIH) in patients undergoing cardiac surgery. METHODS: Patient information was obtained from the electronic health records of the Second Affiliated Hospital of Hainan Medical University. The study included patients, ≥ 18 years of age, who underwent cardiac surgery from December 2007 to January 2018. An RF algorithm, which is a supervised machine learning technique, was employed to predict PIH. Model performance was assessed by the area under the curve (AUC) of the receiver operating characteristic. Mean decrease in the Gini index was used to rank various features based on their importance. RESULTS: Of the 3030 patients included in the study, 1578 (52.1%) experienced hypotension after the induction of anesthesia. The RF model performed effectively, with an AUC of 0.843 (0.808-0.877) and identified mean blood pressure as the most important predictor of PIH after anesthesia. Age and body mass index also had a significant impact. CONCLUSION: The generated RF model had high discrimination ability for the identification of individuals at high risk for a hypotensive event during cardiac surgery. The study results highlighted that machine learning tools confer unique advantages for the prediction of adverse post-anesthesia events.

Manipulation of lasing modes in a circular-side octagonal microcavity laser with a spatially distributed current injection.

We propose and demonstrate a circular-side octagonal microcavity (COM) semiconductor laser with a spatially distributed current injection for manipulating the lasing modes. There are two types of high-quality-factor whispering-gallery (WG) modes with distinct field patterns in a COM: the four-bounced quadrilateral modes and the eight-bounced octagonal modes. By designing two separated p-electrodes, the COM laser is divided into two regions that are pumped independently to select specific modes for lasing. The two types of WG modes lase simultaneously when the two regions are injected with equivalent currents. Degeneracy removal of the quadrilateral modes is observed in both simulation and experiment when the two regions are injected with inequivalent currents. The quadrilateral modes are suppressed when one of the two regions is un-injected or biased with a negative current, and single-octagonal-mode lasing is realized. The results show that the lasing modes can be efficiently manipulated with the spatially distributed current injection considering the distinct field patterns of different WG modes in the microcavities, which can promote the practical application of the microcavity lasers.