RESUMO
NUDC (nuclear distribution protein C) is a mitotic protein involved in nuclear migration and cytokinesis across species. Considered a cytoplasmic dynein (henceforth dynein) cofactor, NUDC was shown to associate with the dynein motor complex during neuronal migration. NUDC is also expressed in postmitotic vertebrate rod photoreceptors where its function is unknown. Here, we examined the role of NUDC in postmitotic rod photoreceptors by studying the consequences of a conditional NUDC knockout in mouse rods (rNudC-/- ). Loss of NUDC in rods led to complete photoreceptor cell death at 6 weeks of age. By 3 weeks of age, rNudC-/- function was diminished, and rhodopsin and mitochondria were mislocalized, consistent with dynein inhibition. Levels of outer segment proteins were reduced, but LIS1 (lissencephaly protein 1), a well-characterized dynein cofactor, was unaffected. Transmission electron microscopy revealed ultrastructural defects within the rods of rNudC-/- by 3 weeks of age. We investigated whether NUDC interacts with the actin modulator cofilin 1 (CFL1) and found that in rods, CFL1 is localized in close proximity to NUDC. In addition to its potential role in dynein trafficking within rods, loss of NUDC also resulted in increased levels of phosphorylated CFL1 (pCFL1), which would purportedly prevent depolymerization of actin. The absence of NUDC also induced an inflammatory response in Müller glia and microglia across the neural retina by 3 weeks of age. Taken together, our data illustrate the critical role of NUDC in actin cytoskeletal maintenance and dynein-mediated protein trafficking in a postmitotic rod photoreceptor.
Assuntos
Actinas , Dineínas , Animais , Camundongos , Transporte Biológico , Morte Celular , Dineínas/genética , Células Fotorreceptoras Retinianas BastonetesRESUMO
NUDC ( nu clear d istribution protein C) is a mitotic protein involved in nuclear migration and cytokinesis across species. Considered a cytoplasmic dynein (henceforth dynein) cofactor, NUDC was shown to associate with the dynein motor complex during neuronal migration. NUDC is also expressed in postmitotic vertebrate rod photoreceptors where its function is unknown. Here, we examined the role of NUDC in postmitotic rod photoreceptors by studying the consequences of a conditional NUDC knockout in mouse rods (r NudC -/- ). Loss of NUDC in rods led to complete photoreceptor cell death at six weeks of age. By 3 weeks of age, r NudC -/- function was diminished, and rhodopsin and mitochondria were mislocalized, consistent with dynein inhibition. Levels of outer segment proteins were reduced, but LIS1 (lissencephaly protein 1), a well-characterized dynein cofactor, was unaffected. Transmission electron microscopy revealed ultrastructural defects within the rods of r NudC -/- by 3 weeks of age. We investigated whether NUDC interacts with the actin modulator cofilin 1 (CFL1) and found that in rods, CFL1 is localized in close proximity to NUDC. In addition to its potential role in dynein trafficking within rods, loss of NUDC also resulted in increased levels of phosphorylated CFL1 (pCFL1), which would purportedly prevent depolymerization of actin. Absence of NUDC also induced an inflammatory response in Müller glia and microglia across the neural retina by 3 weeks of age. Taken together, our data illustrate the critical role of NUDC in actin cytoskeletal maintenance and dynein-mediated protein trafficking in a postmitotic rod photoreceptor. Significance Statement: Nuclear distribution protein C (NUDC) has been studied extensively as an essential protein for mitotic cell division. In this study, we discovered its expression and role in the postmitotic rod photoreceptor cell. In the absence of NUDC in mouse rods, we detected functional loss, protein mislocalization, and rapid retinal degeneration consistent with dynein inactivation. In the early phase of retinal degeneration, we observed ultrastructural defects and an upregulation of inflammatory markers suggesting additional, dynein-independent functions of NUDC.
RESUMO
PURPOSE: The relationships between intraocular pressure (IOP), ocular perfusion pressure (OPP), retinal perfusion, and retinal electrophysiologic responses have been explored experimentally across several animal models. These studies have demonstrated that elevated IOP reduces OPP, and when this reduction in OPP exceeds the autoregulatory capacity of the retina vasculature, retinal perfusion and electrophysiologic responses are reduced. This study aimed to evaluate these interactions for the first time in the living human eye. METHODS: Five eyes from three research-consented brain-dead organ donors underwent optical coherence tomography with angiographic (OCT/A; Spectralis, Heidelberg Engineering) and electroretinographic (ERG, Diagnosys LLC) measurements while IOP was manometrically-elevated stepwise to pressures of 10, 30 and 50 mmHg. Systemic blood pressure (BP) was monitored continuously during testing. Correlation analysis was applied to assess association between ERG and OPP changes. In a single eye, prolonged IOP elevation was induced with viscoelastic injection and serial ERG measurements were obtained. RESULTS: Reductions in inner retinal function defined by photopic ERG were observed with elevation in IOP and concomitant reduction in OPP. Reductions, especially in b-wave, and photopic negative response (PhNR) amplitudes and implicit times were significantly correlated with elevation in IOP and reduction in OPP. There were more appreciable changes in perfusion and functional responses in eyes tested while systemic blood pressure was lower. With prolonged IOP elevation, selective loss of the PhNR response was observed. CONCLUSIONS: In the living human eye, retinal perfusion and inner retinal function are acutely impacted by elevation of IOP, and this impact is related to systemic BP and OPP. This novel approach provides a viable model to study the autoregulatory responses to IOP elevation in the living human eye.
Assuntos
Glaucoma , Hipertensão Ocular , Animais , Humanos , Pressão Intraocular , Retina , Tonometria Ocular , Eletrorretinografia/métodosRESUMO
Zinc oxide is an environmentally friendly and readily synthesized semiconductor with many industrial applications. ZnO powders were prepared by alkali precipitation using different [Zn(acetate)2(amine)x] compounds to alter the particle size and aspect ratio. Slow precipitations from 95 °C solutions produced micron-scale particles with morphologies of hexagonal plates, rods, and needles, depending on the precursor used. Powders prepared at 65 °C with rapid precipitation yielded particles with minimal morphology differences, but particle size was dependent on the precursor used. The smallest particles were produced using precursors that yielded crystals with low aspect ratios during high-temperature synthesis. Particles produced during rapid synthesis had sizes ranging from 21-45 nm. The materials were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, thermogravimetric analysis, BET, and diffuse reflectance. The materials prepared using precursors with less-volatile amines were found to retain more organic material than ZnO produced using precursors with more volatile amines. The amount of organic material associated with the nanoparticles influenced the photocatalytic activity of the ZnO, with powders containing less organic material producing faster rate constants for the decolorizing of malachite green solutions under ultraviolet illumination, independent of particle size. [Zn(acetate)2(hydrazine)2] produced ZnO with the fastest rate constant and was recycled five times for dye degradation studies that revealed minimal to no reduction in catalytic efficiency.
RESUMO
Ultrathin III-V solar cells with proper light management have become more attractive than their optically thick counterparts as they are less expensive and lightweight, can maintain photon absorption, and have high radiation tolerance for space-related applications. Comprehensive optical modeling efforts have provided pathways to improve device efficiency in ultrathin GaAs solar cells with light trapping structures. Usually, the absorption mechanism known as free-carrier absorption (FCA) is ignored in these models due to the ultrathin layers and the direct bandgap of GaAs. This manuscript reports the significance of considering FCA as a parasitic loss caused by the optical enhancement in highly doped non-active layers between the ultrathin solar cell and backside light trapping structures. We model FCA based on Drude theory in a p-type AlGaAs layer behind ultrathin GaAs solar cells with a planar mirror and cylindrical gratings. Our results show that, depending on the AlGaAs thickness and doping concentration, free carriers will absorb transmitted photons and reduce the backside reflectance, degrading the current and voltage output from ideal conditions. One example shows that for a 300 nm-thick GaAs solar cell, the Ag mirror's peak reflectance decreases nearly 12% when the AlGaAs back layer is 800 nm-thick at a doping concentration of 4x1019 cm-3. Notably, the cylindrical grating designs with 38.5%, 46.5%, and 64.9% AlGaAs coverage resulted in an absolute efficiency reduction of 0.6%, 1.8%, and 2.9% at a doping concentration of 4x1019 cm-3, respectively. This novel study demonstrates that FCA in non-active layers must be properly addressed in the device design to progress the efficiency of ultrathin III-V solar cells with light trapping structures.
RESUMO
Self-assembly of vertically aligned III-V semiconductor nanowires (NWs) on two-dimensional (2D) van der Waals (vdW) nanomaterials allows for integration of novel mixed-dimensional nanosystems with unique properties for optoelectronic and nanoelectronic device applications. Here, selective-area vdW epitaxy (SA-vdWE) of InAs NWs on isolated 2D molybdenum disulfide (MoS2) domains is reported for the first time. The MOCVD growth parameter space (i.e., V/III ratio, growth temperature, and total molar flow rates of metalorganic and hydride precursors) is explored to achieve pattern-free positioning of single NWs on isolated multi-layer MoS2 micro-plates with one-to-one NW-to-MoS2 domain placement. The introduction of a pre-growth poly-l-lysine surface treatment is highlighted as a necessary step for mitigation of InAs nucleation along the edges of triangular MoS2 domains and for NW growth along the interior region of 2D micro-plates. Analysis of NW crystal structures formed under the optimal SA-vdWE condition revealed a disordered combination of wurtzite and zinc-blend phases. A transformation of the NW sidewall faceting structure is observed, resulting from simultaneous radial overgrowth during axial NW synthesis. A common lattice arrangement between axially-grown InAs NW core segments and MoS2 domains is described as the epitaxial basis for vertical NW growth. A model is proposed for a common InAs/MoS2 sub-lattice structure, consisting of three multiples of the cubic InAs unit cell along the [21Ì1Ì] direction, commensurately aligned with a 14-fold multiple of the Mo-Mo (or S-S) spacing along the [101Ì0] direction of MoS2 hexagonal lattice. The SA-vdWE growth mode described here enables controlled hybrid integration of mixed-dimensional III-V-on-2D heterostructures as novel nanosystems for applications in optoelectronics, nanoelectronics, and quantum enabling technologies.
RESUMO
A new growth method to make highly oriented GaAs thin films on flexible metal substrates has been developed, enabling roll-to-roll manufacturing of flexible semiconductor devices. The grains are oriented in the <001> direction with <1° misorientations between them, and they have a comparable mobility to single-crystalline GaAs at high doping concentrations. At the moment, the role of low-angle grain boundaries (LAGBs) on device performance is unknown. A series of electron backscatter diffraction (EBSD) and cathodoluminesence (CL) studies reveal that increased doping concentrations decrease the grain size and increase the LAGB misorientation. Cross-sectional scanning transmission electron microscopy (STEM) reveals the complex dislocation structures within LAGBs. Most importantly, a correlative EBSD/electron beam-induced current (EBIC) experiment reveals that LAGBs are carrier recombination centers and that the magnitude of recombination is dependent on the degree of misorientation. The presented results directly link increased LAGB misorientation to degraded device performance, and therefore, strategies to reduce LAGB misorientations and densities would improve highly oriented semiconductor devices.
RESUMO
Nanostructured quantum well and quantum dot III-V solar cells provide a pathway to implement advanced single-junction photovoltaic device designs that can capture energy typically lost in traditional solar cells. To realize such high-efficiency single-junction devices, nanostructured device designs must be developed that maximize the open circuit voltage by minimizing both non-radiative and radiative components of the diode dark current. In this work, a study of the impact of barrier thickness in strained multiple quantum well solar cell structures suggests that apparent radiative efficiency is suppressed, and the collection efficiency is enhanced, at a quantum well barrier thickness of 4 nm or less. The observed changes in measured infrared external quantum efficiency and relative luminescence intensity in these thin barrier structures is attributed to increased wavefunction coupling and enhanced carrier transport across the quantum well region typically associated with the formation of a superlattice under a built-in field. In describing these effects, a high efficiency (>26% AM1.5) single-junction quantum well solar cell is demonstrated in a device structure employing both a strained superlattice and a heterojunction emitter.
RESUMO
As an obvious candidate for a p-type dopant in ZnO, nitrogen remains elusive in this role. Nitrogen containing precursors are a potential means to incorporate nitrogen during MOCVD growth. One class of nitrogen-containing precursors are zinc acetate amines, yet, they have received little attention. The synthesis and single crystal X-ray structure of [Zn(acetate)2(en)], and the synthesis of [Zn(acetate)2(en)2], [Zn(acetate)2(benzylamine)2], [Zn(acetate)2(butylamine)2], [Zn(acetate)2(NH3)2], and [Zn(acetate)2(tris)2], where en = ethylenediamine and tris = (tris[hydroxymethyl]aminomethane) are reported. The compounds were characterized by thermogravimetric analysis and pyrolyzed in air and inert gas to yield ZnO. These compounds are useful single source precursors to ZnO bulk powders by alkali precipitation and ZnO thin films by spray pyrolysis. The amine bound to the zinc influences the ZnO crystal size and shape and acts as a nitrogen donor for preparing nitrogen-doped ZnO during alkali precipitation. Thin films of ZnO prepared by spray pyrolysis using the precursors had a (100) preferred orientation and measured n-type to intrinsic conductivity.
RESUMO
Dense arrays of indium arsenide (InAs) nanowire materials have been grown by selective-area metal-organic vapor-phase epitaxy (SA-MOVPE) using polystyrene-b-poly(methyl methacrylate) (PS/PMMA) diblock copolymer (DBC) nanopatterning technique, which is a catalyst-free approach. Nanoscale openings were defined in a thin (~10 nm) SiNx layer deposited on a (111)B-oriented GaAs substrate using the DBC process and CF4 reactive ion etching (RIE), which served as a hard mask for the nanowire growth. InAs nanowires with diameters down to ~ 20 nm and micrometer-scale lengths were achieved with a density of ~ 5 × 10(10) cm(2). The nanowire structures were characterized by scanning electron microscopy and transmission electron microscopy, which indicate twin defects in a primary zincblende crystal structure and the absence of threading dislocation within the imaged regions.