RESUMO
The production and application of materials are evolving towards the low-dimensional micro-nano scale. Nevertheless, the fabrication of micron-scale alloy fibers remains a challenge. Herein, a novel Ni-Co-Cr-Fe-Mo high-entropy alloy (HEA) fiber with a cold-drawn reduction rate of 99.9995% and a strain (É) of 12.19 is presented without requiring intermediate annealing. The exceptional deformation strain of 11.62 within the fiber leads to extraordinary tensile strengths of 2.8 GPa at room temperature and 3.6 GPa at 123 K. The in-depth investigation of the microstructure of fibers has revealed the cold drawing deformation mechanisms mediated by the synergistic effects of plane defects. Specifically, various geometrically necessary dislocation interfaces, such as dislocation walls and microbands, along with deformation twins and long-period 9R structures, form in response to external stress when É≤2.7. As the strain increases, the saturated layered structure emerges and progressively evolves into a 3D equiaxed crystal. Moreover, the formation and evolution of the 9R structure (i.e., the migration of incoherent twin boundaries), coupled with the interaction of partial dislocations and the role of deformation twins, are crucial factors determining the fiber's plastic response. This work provides a novel approach to discovering new high-strength metallic fibers with excellent deformability through plane defects engineering.
RESUMO
In this paper, the corrosion resistance of FeCoSiBPC amorphous alloy after pre-oxidation and non-oxidation heat treatment is investigated. The corrosion behaviors of Fe80Co3Si3B10P1C3 amorphous alloys in 1 mol/L NaCl solution were investigated by the electrochemical workstation. The pre-oxidation heat treatment can improve the corrosion resistance of FeCoSiBPC amorphous alloy through an increase in the Ecorr value from -0.736 to -0.668 V, which makes it easy to reach a passive state. The corroded morphology and products of amorphous alloys were tested by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The SEM/TEM analysis showed that, after pre-oxidation treatment, the oxide layer was divided into two layers: the inner layer was amorphous, the outer layer appeared crystalline, and the main oxide was Fe2O3. During the oxidation process, Co and P elements diffused from the inner layer to the outer layer, forming phosphorus and cobalt oxides with high corrosion resistance on the surface of the ribbon, thereby improving the corrosion resistance of the ribbon.
RESUMO
The catalyst of nanoporous Cu (NP-Cu) powders, with the chemical composition of Cu79.63Ni6.85O13.53(at%), was successfully fabricated by dealloying of Zr-Cu-Ni-Al metallic glassy precursors. The as-prepared NP-Cu powders, co-existing with Cu2O phase on Cu ligament surface, had a three-dimensional network porous structure. The NP-Cu powders/H2O2system showed superior catalytic degradation efficiency toward azo dyes in both acidic (pH 2) and neutral (pH 7) environments. Moreover, the cyclic tests indicated that this powder catalyst also exhibited good durability. A novel degradation mechanism of NP-Cu powders/H2O2was proposed: the high degradation performance in acidic environment was mainly derived from heterogeneous reaction involved with a specific pathway related to Cu3+to produce HO·, while in neutral environment it was primarily resulted from homogeneous reaction with the generation of HO· from the classical Cu-based Fenton-like process. This work indicates that the NP-Cu powders have great potential applications as catalysts for wastewater treatments.
RESUMO
A method of gradient elution ion chromatography with integrated pulsed amperometric detection for simultaneous determination of twenty amino acids and six carbohydrates in soy sauce was established. The effects of column temperature, pH value of solution, and standing time were studied, and then the suitable gradient elution conditions were found for the determination. In the conditions that the flow rate is 0.25 mL/min, pH value of solution is in the range of 5.2-6.7, temperature of column is 35â, the linear relationships of the 26 components are good and the correlation coefficients are not less than 0.995. Except glutamine, leucine, isoleucine and methionine, the limits of detection (S/N=3) of the other 22 components are less than 0.03 mg/L. The recoveries of the 26 components in soy sauce are 84.2%-109% at the spiked levels of 0.20, 0.50, 2.00 mg/L, and the relative standard deviations (RSDs) are in the range of 2.7%-7.8%. The method is efficient, easy, sensitive, and accurate for simultaneous determination of amino acids and carbohydrates in soy sauce, and can provide an effective research technique for adulterated soy sauce.
Assuntos
Aminoácidos/análise , Carboidratos/análise , Alimentos de Soja/análise , Cromatografia por Troca IônicaRESUMO
Change history: In this Letter, owing to a production error, all the data points (except the two points for O-2 and N-2, respectively) were missing in Fig. 1b. The figure has been corrected online.
RESUMO
Oxygen, one of the most abundant elements on Earth, often forms an undesired interstitial impurity or ceramic phase (such as an oxide particle) in metallic materials. Even when it adds strength, oxygen doping renders metals brittle1-3. Here we show that oxygen can take the form of ordered oxygen complexes, a state in between oxide particles and frequently occurring random interstitials. Unlike traditional interstitial strengthening4,5, such ordered interstitial complexes lead to unprecedented enhancement in both strength and ductility in compositionally complex solid solutions, the so-called high-entropy alloys (HEAs)6-10. The tensile strength is enhanced (by 48.5 ± 1.8 per cent) and ductility is substantially improved (by 95.2 ± 8.1 per cent) when doping a model TiZrHfNb HEA with 2.0 atomic per cent oxygen, thus breaking the long-standing strength-ductility trade-off11. The oxygen complexes are ordered nanoscale regions within the HEA characterized by (O, Zr, Ti)-rich atomic complexes whose formation is promoted by the existence of chemical short-range ordering among some of the substitutional matrix elements in the HEAs. Carbon has been reported to improve strength and ductility simultaneously in face-centred cubic HEAs12, by lowering the stacking fault energy and increasing the lattice friction stress. By contrast, the ordered interstitial complexes described here change the dislocation shear mode from planar slip to wavy slip, and promote double cross-slip and thus dislocation multiplication through the formation of Frank-Read sources (a mechanism explaining the generation of multiple dislocations) during deformation. This ordered interstitial complex-mediated strain-hardening mechanism should be particularly useful in Ti-, Zr- and Hf-containing alloys, in which interstitial elements are highly undesirable owing to their embrittlement effects, and in alloys where tuning the stacking fault energy and exploiting athermal transformations13 do not lead to property enhancement. These results provide insight into the role of interstitial solid solutions and associated ordering strengthening mechanisms in metallic materials.
RESUMO
Bulk metallic glasses (BMGs) are known to have extraordinary merits such as ultrahigh strength and dynamic toughness etc. but tied to the detrimental brittleness, which has become a critical issue to the engineering application and understanding the glass nature. In this article, we report a new class of Zr-Cu-Al-Mo BMGs with extraordinary plastic strain above 20%. "Work-hardening" effect after yielding in a wide range of plastic deformation process has been detected for this kind of BMGs. Compositional heterogeneity, which can be classified into ZrMo- and Cu-rich zones, was differentiated in this kind of BMG. Pronounced humps have been observed on the high frequency kinetic spectrum in Mo containing BMGs, which is the indicator of ß-relaxation transition. The underlying mechanism for the excellent plastic deforming ability of this class of BMGs is ascribed to the synergistic effects of soft ZrMo-rich glass formed through phase separation and abundant flow units which related to ß-relaxation.
RESUMO
One of the central themes in materials science is the structure-property relationship. In conventional crystalline metals, their mechanical behaviour is often dictated by well-defined structural defects such as dislocations, impurities, and twins. However, the structure-property relationship in amorphous alloys is far from being understood, due to great difficulties in characterizing and describing the disordered atomic-level structure. Herein, we report a universal, yet simple, correlation between the macroscopic mechanical properties (i.e., yield strength and shear modulus) and a unique characteristic structural length in metallic glasses (MGs). Our analysis indicates that this characteristic length can incorporate effects of both the inter-atomic distance and valence electron density in MGs, and result in the observed universal correlation. The current findings shed lights on the basic understanding of mechanical properties of MGs from their disordered atomic structures.
RESUMO
We investigate the sub-T(g) relaxation patterns (RPs) in binary and quaternary Cu-based glass ribbons (GRs) by using the hyperquenching-sub-T(g) annealing-calorimetric approach. This study contributes to revealing the structural or dynamic evolution in liquids related to the observed three-stage sub-T(g) relaxation processes in GRs. In this work, we have achieved the following three findings. First, the abnormal three-stage relaxation behavior is not a general phenomenon for Cu-based metallic glasses and could not be simply predicted by the large difference in the enthalpy of mixing between different elements in alloys. Second, the abnormal three-stage RP is associated with the non-monotonic change of cluster size with medium range order in supercooled liquids. Third, the existence of the liquid-liquid phase transition depicted by anomalous viscosity drop during cooling in superheated liquids could be a signature of the unusual structural change causing the abnormal three-step sub-T(g) RP in the GRs. This work helps to better understand the complex structural evolution from superheated to supercooled liquids approaching T(g).
RESUMO
Ti-Nb-based Gum Metals exhibit extraordinary superelasticity with ultralow elastic modulus, superior strength and ductility, and a peculiar dislocation-free deformation behavior, most of which challenge existing theories of crystal strength. Additionally, this kind of alloys actually displays even more anomalous mechanical properties, such as the non-linear superelastic behavior, accompanied by a pronounced tension-to-compression asymmetry, and large ductility with a low Poisson's ratio. Two main contradictory arguments exist concerning the deformation mechanisms of those alloys, i.e., formation of reversible nanodisturbance and reversible martensitic transformation. Herein we used the in-situ synchrotron high-energy X-ray scattering technique to reveal the novel intrinsic physical origin of all anomalous mechanical properties of the Ti-24Nb-4Zr-8Sn-0.10O alloy, a typical gum-like metal. Our experiments provide direct evidence on two different kinds of interesting, stress-induced, reversible nanoscale martensitic transitions, i.e., the austenitic regions with B2 structure transform to αâ³ martensite and those with BCC structure transform to δ martensite.