RESUMO
BACKGROUND: Accurate assessment of plaque accumulation near the carotid bifurcation is important for the effective prevention and treatment of stroke. However, vessel and plaque delineation using MRI can be limited by low contrast-to-noise ratio (CNR) and long acquisition times. In this work, a 10-channel phased-array receive coil design for bilateral imaging of the carotid bifurcation using 3T MRI is proposed. METHODS: The proposed 10-channel receive coil was compared to a commercial 4-channel receive coil configuration using data acquired from phantoms and healthy volunteers (N = 9). The relative performance of the coils was assessed, by comparing signal-to-noise ratio (SNR), noise correlation, g-factor noise amplification, and the CNR between vessel wall and lumen using black-blood sequences. Patient data were acquired from 12 atherosclerotic carotid artery disease patients. RESULTS: The 10-channel coil consistently provided substantially increased SNR in phantoms (+77 ± 27%) and improved CNR in healthy carotid arteries (+62 ± 11%), or reduced g-factor noise amplification. Patient data showed excellent delineation of atherosclerotic plaque along the length of the carotid bifurcation using the 10-channel coil. CONCLUSIONS: The proposed 10-channel coil design allows for improved visualization of the carotid arteries and the carotid bifurcation and increased parallel imaging acceleration factors relative to a commercial 4-channel coil design.
Assuntos
Doenças das Artérias Carótidas , Placa Aterosclerótica , Humanos , Artérias Carótidas/diagnóstico por imagem , Imageamento por Ressonância Magnética/métodos , Doenças das Artérias Carótidas/diagnóstico por imagem , Razão Sinal-Ruído , Imagens de FantasmasRESUMO
We are currently witnessing the dawn of hydrogen (H2) economy, where H2 will soon become a primary fuel for heating, transportation, and long-distance and long-term energy storage. Among diverse possibilities, H2 can be stored as a pressurized gas, a cryogenic liquid, or a solid fuel via adsorption onto porous materials. Metal-organic frameworks (MOFs) have emerged as adsorbent materials with the highest theoretical H2 storage densities on both a volumetric and gravimetric basis. However, a critical bottleneck for the use of H2 as a transportation fuel has been the lack of densification methods capable of shaping MOFs into practical formulations while maintaining their adsorptive performance. Here, we report a high-throughput screening and deep analysis of a database of MOFs to find optimal materials, followed by the synthesis, characterization, and performance evaluation of an optimal monolithic MOF (monoMOF) for H2 storage. After densification, this monoMOF stores 46 g L-1 H2 at 50 bar and 77 K and delivers 41 and 42 g L-1 H2 at operating pressures of 25 and 50 bar, respectively, when deployed in a combined temperature-pressure (25-50 bar/77 K â 5 bar/160 K) swing gas delivery system. This performance represents up to an 80% reduction in the operating pressure requirements for delivering H2 gas when compared with benchmark materials and an 83% reduction compared to compressed H2 gas. Our findings represent a substantial step forward in the application of high-density materials for volumetric H2 storage applications.
RESUMO
Successful salt (NaCl) reduction strategies are required to reduce the salt content of snacks while maintaining saltiness perception and consumer acceptance. Previous research suggests that particle physicochemical design rules (small particle size, low density, low hydrophobicity, optimised particle shape) can be leveraged to produce salt particles that enhance saltiness perception. This study aimed to validate these design rules by applying optimised model salts to unsalted potato crisps at a 30% reduced salt content to produce prototype products. A selection of commercial products were also chosen to represent the salt content and crisp style of the broader market, with the aim to investigate the potential of other salt reduction strategies including; direct salt removal without compensation for loss of salt content and increasing time in mouth, while exploring the impact of consumer mouth behaviour type on consumer product preference. Nine products varying in salt content (6 standard, 1 crinkle-cut, 1 thick-cut batch-fried, 1 baked reconstituted potato) were subject to descriptive sensory analysis with a trained panel (n = 11). A subset (seven products) were assessed for consumer acceptance (n = 93). A salt reduction of 30% was achieved while maintaining saltiness perception and consumer acceptance using model salts, while direct removal of salt without perceptual impact was only achievable by 15%. To investigate key drivers of liking, consumers were segmented based on product liking and mouth behaviour. Results suggested that whilst salt content was the primary driver, specific texture profiles were polarising. However, mouth behaviour had minimal influence on preference. These results validate previously described physicochemical design rules for developing novel salt particles for salt reduction and inform ingredient design for the food and flavour industries.
Assuntos
Cloreto de Sódio , Solanum tuberosum , Sais , Lanches , Cloreto de Sódio/análise , Cloreto de Sódio na Dieta/análise , Solanum tuberosum/química , Percepção GustatóriaRESUMO
A 74-year-old woman presents with a 7-day history of increasing lower abdominal pains and reduced bowel movements; resulting in absolute constipation.Twenty-four hours prior to admission she also had symptoms of nauseous and significant abdominal distention. Her past medical history included; diverticulitis, type 2 diabetes, hypercholesterolemia, an ultrasound scan in 2005 confirming gallstones, but no previous abdominal surgery.She was initially treated for bowel obstruction and a CT arranged. CT showed a 4.5 cm gallstone in mid-sigmoid colon and a cholecystocolonic fistula. She was booked for colonoscopy±laparotomy, but on the morning of her planned procedure she repeatedly opened her bowels. Subsequent colonoscopy was negative and repeat CT confirmed the stone was no longer within the gastrointestinal tract.
Assuntos
Diabetes Mellitus Tipo 2 , Cálculos Biliares , Íleus , Doenças do Colo Sigmoide , Idoso , Tratamento Conservador , Feminino , Cálculos Biliares/diagnóstico por imagem , Cálculos Biliares/cirurgia , HumanosRESUMO
Coordinatively unsaturated metal sites within certain zeolites and metal-organic frameworks can strongly adsorb a wide array of substrates. While many classical examples involve electron-poor metal cations that interact with adsorbates largely through physical interactions, unsaturated electron-rich metal centers housed within porous frameworks can often chemisorb guests amenable to redox activity or covalent bond formation. Despite the promise that materials bearing such sites hold in addressing myriad challenges in gas separations and storage, very few studies have directly interrogated mechanisms of chemisorption at open metal sites within porous frameworks. Here, we show that nondissociative chemisorption of H2 at the trigonal pyramidal Cu+ sites in the metal-organic framework CuI-MFU-4l occurs via the intermediacy of a metastable physisorbed precursor species. In situ powder neutron diffraction experiments enable crystallographic characterization of this intermediate, the first time that this has been accomplished for any material. Evidence for a precursor intermediate is also afforded from temperature-programmed desorption and density functional theory calculations. The activation barrier separating the precursor species from the chemisorbed state is shown to correlate with a change in the Cu+ coordination environment that enhances π-backbonding with H2. Ultimately, these findings demonstrate that adsorption at framework metal sites does not always follow a concerted pathway and underscore the importance of probing kinetics in the design of next-generation adsorbents.
RESUMO
Many older adults fail to meet their daily protein requirements, potentially due to social, physical and medical factors, including sensory and appetite changes. Additionally, our previous research has identified potential sulfurous off-flavours, originating from heat-treatment of protein ingredients, which could play a role in consumer acceptance. This study aims to determine the hedonic impact of these potential off-flavours when added to a dairy beverage, identify the specific off-flavour concentrations which cause rejection by consumers, and lastly investigate difference in acceptance between older and younger consumers. A rejection threshold (RjT) protocol was used, in combination with Best Estimate Thresholds (BET), whereby sulfurous flavours (dimethyl sulfide, dimethyl disulfide and dimethyl trisulfide), and diacetyl were added to create a range of concentrations. 95 participants (younger n = 49, 18-38 years; older n = 46, 60-79 years) tasted 7 pairs of samples (one blank and one with ascending off-flavour concentration) and selected their preferred samples. Sulfurous flavours negatively impacted consumer acceptance, however, the extent to which they impart a negative effect differs between age groups. Younger adults rejected samples containing low concentrations of sulfurous off-flavours (1.55 ppb), however, older adults rejected samples with concentrations over 3 times higher (5.08 ppb). When combined with sulfurous flavours, diacetyl increased the rejection threshold for both groups. In conclusion, these observations imply that a greater quantity of off-flavour may be present before acceptance is reduced in the older consumer group. Moreover, diacetyl demonstrates partial masking abilities of sulfurous off-flavours, and BET gave a more conservative estimate of acceptability. This knowledge will help guide sensory innovation of high-protein beverages for older consumers to support product acceptance and optimal intake.
RESUMO
Novel sodium reduction strategies are urgently required by the food industry. We hypothesised that redesigning salt crystals (size, density, hydrophobicity and flow properties) will offer a new route to increase saltiness and therefore reduce sodium. Eight salts were compared with different physicochemical properties, the resultant particles were characterised and adhesion to product, loss in-pack, rate of dissolution and ultimately saltiness perception were evaluated. Principle findings included that particle adhesion was driven by particle size (r = -0.85, p = 0.008), bulk density (r = -0.80, p = 0.017) and flow properties (r = 0.77, p = 0.015); loss in-pack was associated with particle size and hydrophobicity of the salt particle while dissolution and/or saltiness perception was also driven by particle size and hydrophobicity of the salt particle. The findings offer a new set of design rules for future ingredient design for the food and flavour industries.
Assuntos
Sais/química , Cloreto de Sódio na Dieta/análise , Sódio/análise , Idoso , Feminino , Humanos , Cinética , Análise dos Mínimos Quadrados , Masculino , Espectrometria de Massas , Pessoa de Meia-Idade , Tamanho da Partícula , Sódio/química , Paladar/fisiologia , Percepção GustatóriaRESUMO
Built-in electric fields at semiconductor junctions are vital for optoelectronic and photocatalytic applications since they govern the movement of photogenerated charge carriers near critical surfaces and interfaces. Here, we exploit transient photoreflectance (TPR) spectroscopy to probe the dynamical evolution of the built-in field for n-GaAs photoelectrodes upon photoexcitation. The transient fields are modeled in order to quantitatively describe the surface carrier dynamics that influence those fields. The photoinduced surface field at different types of junctions between n-GaAs and n-TiO2, Pt, electrolyte and p-NiO are examined, and the results reveal that surface Fermi-level pinning, ubiquitous for many GaAs surfaces, can have beneficial consequences that impact photoelectrochemical applications. That is, Fermi-level pinning results in the primary surface carrier dynamics being invariant to the contacting layer and promotes beneficial carrier separation. For example, when p-NiO is deposited there is no Fermi-level equilibration that modifies the surface field, but photogenerated holes are promoted to the n-GaAs/p-NiO interface and can transfer into defect midgap states within the p-NiO resulting in an elongated charge separation time and those transferred holes can participate in chemical reactions. In contrast, when the Fermi-level is unpinned via molecular surface functionalization on p-GaAs, the carriers undergo surface recombination faster due to a smaller built-in field, thus potentially degrading their photochemical performance.
RESUMO
PURPOSE: To assess whether artifacts in multi-slice multi-echo spin echo neck imaging, thought to be caused by brief motion events such as swallowing, can be corrected by reacquiring corrupted central k-space data and estimating the remainder with parallel imaging. METHODS: A single phase-encode line (ky = 0, phase-encode direction anteroposterior) navigator echo was used to identify motion-corrupted data and guide the online reacquisition. If motion corruption was detected in the 7 central k-space lines, they were replaced with reacquired data. Subsequently, GRAPPA reconstruction was trained on the updated central portion of k-space and then used to estimate the remaining motion-corrupted k-space data from surrounding uncorrupted data. Similar compressed sensing-based approaches have been used previously to compensate for respiration in cardiac imaging. The g-factor noise amplification was calculated for the parallel imaging reconstruction of data acquired with a 10-channel neck coil. The method was assessed in scans with 9 volunteers and 12 patients. RESULTS: The g-factor analysis showed that GRAPPA reconstruction of 2 adjacent motion-corrupted lines causes high noise amplification; therefore, the number of 2-line estimations should be limited. In volunteer scans, median ghosting reduction of 24% was achieved with 2 adjacent motion-corrupted lines correction, and image quality was improved in 2 patient scans that had motion corruption close to the center of k-space. CONCLUSION: Motion-corrupted echo-trains can be identified with a navigator echo. Combined reacquisition and parallel imaging estimation reduced motion artifacts in multi-slice MESE when there were brief motion events, especially when motion corruption was close to the center of k-space.
Assuntos
Algoritmos , Imageamento por Ressonância Magnética , Artefatos , Humanos , Processamento de Imagem Assistida por Computador , Movimento (Física) , Reprodutibilidade dos TestesRESUMO
To reduce animal testing, there is a need to develop novel in-vitro models for evaluating the retention of bioactive compounds in food and pharmaceutical products. Here, a mucus-mimetic platform was developed through a one-step approach based on encapsulating mucin within alginate gel beads. We found that mucins form micron sized aggregates distributed across the surface of the calcium-alginate bead, as shown by environmental scanning electron microscopy (ESEM). Retention of bioactive compounds on the mucin-functionalised surface was tested using a commercial orange drink formulation. To aid flavour retention, different mucoadhesive polymers with varying charge, including anionic, neutral and strongly cationic, were tested for their ability to interact with mucin and aid retaining flavour compounds within the mucin-alginate bead. The alginate-mucin mucus mimic was validated using an ex-vivo bovine tongue, with the flavour retention results showing qualitative agreement. The developed method proved to be a convenient, efficient tool for providing information on the effectiveness of mucoadhesive polymers without variability, safety and sustainability issues associated with an ex-vivo or in-vivo system. We propose that by encapsulating other relevant oral proteins, alongside mucins, current gaps between in-vitro and the ex-vivo systems may be narrowed.
Assuntos
Alginatos/química , Mucinas/química , Adesividade , Alginatos/metabolismo , Animais , Fenômenos Químicos , Cromatografia Gasosa-Espectrometria de Massas , Mucinas/metabolismo , Muco/metabolismo , SuínosRESUMO
While a good mucoadhesive biopolymer must adhere to a mucus membrane, it must also have a good unloading ability. Here, we demonstrate that the biopolymer pullulan is partially digested by human salivary α-amylase, thus acting as a controlled release system, in which the enzyme triggers an increased release of flavour. Our oral processing simulations have confirmed an increase in the bioavailability of aroma and salt compounds as a function of oral pullulan degradation, although the release kinetics suggest a rather slow process. One of the greatest challenges in flavour science is to retain and rapidly unload the bioactive aroma and taste compounds in the oral cavity before they are ingested. By developing a cationic pullulan analogue we have, in theory, addressed the "loss through ingestion" issue by facilitating the adhesion of the modified polymer to the oral mucus, to retain more of the flavour in the oral cavity. Dimethylaminoethyl pullulan (DMAE-pullulan) was synthesised for the first time, and shown to bind submaxillary mucin, while still retaining its susceptibility to α-amylase hydrolysis. Although DMAE-pullulan is not currently food grade, we suggest that the synthesis of a sustainable food grade alternative would be a next generation mucoadhesive targeted for the oral cavity.
RESUMO
In order to determine a material's hydrogen storage potential, capacity measurements must be robust, reproducible, and accurate. Commonly, research reports focus on the gravimetric capacity, and often times the volumetric capacity is not reported. Determining volumetric capacities is not as straight-forward, especially for amorphous materials. This is the first study to compare measurement reproducibility across laboratories for excess and total volumetric hydrogen sorption capacities based on the packing volume. The use of consistent measurement protocols, common analysis, and figure of merits for reporting data in this study, enable the comparison of the results for two different materials. Importantly, the results show good agreement for excess gravimetric capacities amongst the laboratories. Irreproducibility for excess and total volumetric capacities is attributed to real differences in the measured packing volume of the material.
RESUMO
We present a rheological investigation of fuel cell catalyst inks. The effects of ink parameters, which include carbon black-support structure, Pt presence on carbon support (Pt-carbon), and ionomer (Nafion) concentration, on the ink microstructure of catalyst inks were studied using rheometry in combination with ultrasmall-angle X-ray scattering (USAXS) and dynamic light scattering (DLS). Dispersions of a high-surface-area carbon (HSC), or Ketjen black type, demonstrated a higher viscosity than Vulcan XC-72 carbon due to both a higher internal porosity and a more agglomerated structure that increased the effective particle volume fraction of the inks. The presence of Pt catalyst on both the carbon supports reduced the viscosity through electrostatic stabilization. For carbon-only dispersions (without Pt), the addition of ionomer up to a critical concentration decreased the viscosity due to electrosteric stabilization of carbon agglomerates. However, with Pt-carbon dispersions, the addition of ionomer showed contrasting behavior between Vulcan and HSC supports. In the Pt-Vulcan dispersions, the effect of ionomer addition on the rheology was qualitatively similar to Vulcan dispersions without Pt. The Pt-HSC dispersions showed an increased viscosity with ionomer addition and a strong shear-thinning nature, indicating that Nafion likely flocculated the Pt-HSC aggregates. These results were verified using DLS and USAXS. Further, the observations of the effect of ionomer:carbon ratio and a comparison between carbons of different surface areas provided insights on the microstructure of the catalyst ink corresponding to the optimized I/ C ratio for fuel cell performance reported in the literature.
RESUMO
Hydrogen holds promise as a clean alternative automobile fuel, but its on-board storage presents significant challenges due to the low temperatures and/or high pressures required to achieve a sufficient energy density. The opportunity to significantly reduce the required pressure for high density H2 storage persists for metal-organic frameworks due to their modular structures and large internal surface areas. The measurement of H2 adsorption in such materials under conditions most relevant to on-board storage is crucial to understanding how these materials would perform in actual applications, although such data have to date been lacking. In the present work, the metal-organic frameworks M2(m-dobdc) (M = Co, Ni; m-dobdc4- = 4,6-dioxido-1,3-benzenedicarboxylate) and the isomeric frameworks M2(dobdc) (M = Co, Ni; dobdc4- = 1,4-dioxido-1,3-benzenedicarboxylate), which are known to have open metal cation sites that strongly interact with H2, were evaluated for their usable volumetric H2 storage capacities over a range of near-ambient temperatures relevant to on-board storage. Based upon adsorption isotherm data, Ni2(m-dobdc) was found to be the top-performing physisorptive storage material with a usable volumetric capacity between 100 and 5 bar of 11.0 g/L at 25 °C and 23.0 g/L with a temperature swing between -75 and 25 °C. Additional neutron diffraction and infrared spectroscopy experiments performed with in situ dosing of D2 or H2 were used to probe the hydrogen storage properties of these materials under the relevant conditions. The results provide benchmark characteristics for comparison with future attempts to achieve improved adsorbents for mobile hydrogen storage applications.
RESUMO
BACKGROUND: The epidemiology of abdominal aortic aneurysm (AAA) is changing. Outcomes for aortic surgery have improved. However, the accepted guideline for the management of AAAs has remained unchanged over the last 2 decades. We aimed to gain insight into the patients' experience while they are managed under the traditional clinical pathway. METHOD: With the help of a patient focus group, we designed a survey to assess the patients' perception of the disease and their experience during different stages of the AAA clinical care pathway (surveillance, perioperative care, postoperative follow-up). An invitation to participate in the survey was sent to all patients with AAA who were receiving care at the Oxford Regional Vascular Services Unit, part of the Oxford University Hospitals NHS Trust. RESULTS: We received 194 responses from patients with AAA. One hundred seventy-seven were male, with a median age of 75 to 79 years. Just over a third had undergone surgery already, and the remaining 63% were either in surveillance or awaiting surgery. Their experience during the AAA management pathway was mostly positive. Of the issues that were most important to them in terms of their medical care, the provision of explanation and regularity of monitoring stood out as the most common considerations. CONCLUSION: Patients are generally satisfied with the care they received, but there is room for improvement. They have also highlighted key areas that are most important to them in terms of their medical care. These should guide the future direction for quality improvement and research.
RESUMO
As part of the Oxford Abdominal Aortic Aneurysm (OxAAA) Study, we conducted an international survey of vascular surgery professionals. One aspect of the survey is as published in the International Journal of Cardiology: "International Opinion on Priorities in Research for Small Abdominal Aortic Aneurysms and the Potential Path for Research to Impact Clinical Management". This Data-in-Brief article contains a detailed method for the conduct of this survey and additional original data. In this survey, we also provided vascular surgery colleagues with contemporary epidemiologic and surgical outcome data. This was followed by a hypothetical scenario whereby a patient had just been diagnosed with a small (40 mm) AAA and a novel biomarker predicted it to be fast growing in the coming years. We assessed the vascular professionals' perception of the patient's preference for management in this scenario, and their willingness to refer patients for a surgical trial that investigates the outcome of early versus late surgery in this setting. The survey then asked the vascular professionals to assume the role of the patient, and provided their own preferences in such a scenario.
RESUMO
Direct oral anticoagulants (DOACs) are being increasingly used in the clinical setting for patients at risk of venous thromboembolism (VTE) and/or stroke. These medications offer valued benefits for long-term use, including a fast onset of anticoagulation, fixed anticoagulation profile (and consequent prescription of specified doses) and no requirement for routine monitoring. Apixaban is a selective factor Xa inhibitor, approved for use in the prevention of stroke in patients with nonvalvular atrial fibrillation and in the prevention and treatment of acute VTE. Like many of the DOACs, it has a fast onset of action and works to deliver predictable coagulation results. Multiple randomized controlled trials including ARISTOTLE and AMPLIFY have shown apixaban to be noninferior to vitamin K antagonists in the prevention of stroke and VTE, with a good safety profile. This article aims to review the use of apixaban for the prevention and treatment of thromboembolic disease, highlighting the key study results that have led to its current licensing and use.
Assuntos
Coagulação Sanguínea/efeitos dos fármacos , Inibidores do Fator Xa/administração & dosagem , Pirazóis/administração & dosagem , Piridonas/administração & dosagem , Acidente Vascular Cerebral/prevenção & controle , Tromboembolia Venosa/prevenção & controle , Administração Oral , Inibidores do Fator Xa/efeitos adversos , Inibidores do Fator Xa/farmacocinética , Hemorragia/induzido quimicamente , Humanos , Pirazóis/efeitos adversos , Pirazóis/farmacocinética , Piridonas/efeitos adversos , Piridonas/farmacocinética , Fatores de Risco , Acidente Vascular Cerebral/sangue , Acidente Vascular Cerebral/epidemiologia , Resultado do Tratamento , Tromboembolia Venosa/sangue , Tromboembolia Venosa/epidemiologiaRESUMO
The new generation of target-specific oral anticoagulants is being prescribed for increasing numbers of patients at risk of stroke or venous thromboembolism (VTE). These drugs offer valuable benefits due to fast onset anticoagulation, a fixed anticoagulation effect (allowing administration of specified doses), and no requirement for routine monitoring. Edoxaban is a fast-acting oral anticoagulant, approved for use in the prevention of stroke in patients with nonvalvular atrial fibrillation (AF) and in the treatment of acute VTE. Like many of the new oral anticoagulants, it selectively inhibits factor Xa, in a concentration-dependent manner. Multiple Phase II clinical trials have shown edoxaban to be noninferior to vitamin K antagonists in the prevention of stroke and VTE, with a good safety profile. To date, the pivotal studies to endorse edoxaban's clinical use have been ENGAGE AF-TIMI and Hokusai-VTE, both of which have compared its efficacy to standard warfarin treatment. This paper aims at reviewing the use of edoxaban in the management of stroke and thromboembolic disease, highlighting the key study results that have led to its current license.