A superabsorbent and pH-responsive copolymer-hydrogel based on acemannan from Aloe vera (Aloe barbadensis M.): A smart material for drug delivery.

Combining natural polysaccharides with synthetic materials improves their functional properties which are essential for designing sustained-release drug delivery systems. In this context, the Aloe vera leaf mucilage/hydrogel (ALH) was reacted with acrylic acid (AA) to synthesize a copolymerized hydrogel, i.e., ALH-grafted-Polyacrylic acid (ALH-g-PAA) through free radical copolymerization. Concentrations of the crosslinker N,N'-methylene-bis-acrylamide (MBA), and the initiator potassium persulfate (KPS) were optimized to study their effects on ALH-g-PAA swelling. The FTIR and solid-state NMR (CP/MAS 13C NMR) spectra witnessed the formation of ALH-g-PAA. Scanning electron microscopy (SEM) analysis revealed superporous nature of ALH-g-PAA. The gel fraction (%) of ALH-g-PAA was directly related to the concentrations of AA and MBA whereas the sol fraction was inversely related to the concentrations of AA and MBA. The porosity (%) of ALH-g-PAA directly depends on the concentration of AA and MBA. The ALH-g-PAA swelled admirably at pH 7.4 and insignificantly at pH 1.2. The ALH-g-PAA offered on/off switching properties at pH 7.4/1.2. The metoprolol tartrate was loaded on different formulations of ALH-g-PAA. The ALH-g-PAA showed pH, time, and swelling-dependent release of metoprolol tartrate (MT) for 24 h following the first-order kinetic and Korsmeyer-Peppas model. Haemocompatibility studies ascertained the non-thrombogenic and non-hemolytic behavior of ALH-g-PAA.

Structure, chemical modification, and functional applications of mucilage from Mimosa pudica seeds - A review.

Mimosa pudica (MP) is an ornamental plant due to seismonastic movements that close leaves and fall petioles in response to touch, wind, light, heat, cold, and vibration. The seeds of MP secrete smart, biocompatible, and non-toxic mucilage that has captivated researchers due to its widespread use in various fields such as pharmaceuticals and biotechnology. The mucilage is responsive to pH, salt solutions, and solvents and acts as a binder in tablet formulations for targeted drug delivery. The mucilage is chemically modifiable via acetylation, succinylation, and graft polymerization. Chemically modified MP mucilage appeared supersorbent for heavy metal ion uptake. Nanoparticles synthesized using mucilage as a reducing and capping agent displayed significant antimicrobial and wound-healing potential. Crosslinking of mucilage using citric acid as a crosslinking agent offers a sustained release of drugs. The present review is aimed to discuss extraction optimization, structure, modification, and the stimuli-responsive nature of mucilage. The review article will cover the potential of mucilage as emulsifying, suspending, bio-adhesive, gelling, and thickening agent. The role of mucilage as a capping and reducing agent for nanoparticles will also be discussed.

Pharmacological and Therapeutic Potential of Berbamine: A Potent Alkaloid from Genus Berberis.

Berbamine (Ber) is an active medicinal bisbenzylisoquinoline alkaloid, which is usually obtained from different plants of the genus Berberis (family Berberidaceae) and is used to cure various disorders in traditional Chinese and Ayurvedic systems of medicine. Numerous in-vitro and in-vivo studies revealed the apoptotic and cytotoxic potential of Ber against different cell lines (SMMC-7721, A549, MDA-MB-231, and K562) by upregulating pro-apoptotic (Bax, p53) and downregulating anti-apoptotic (Bcl-2, survivin) proteins. Other pharmacological attributes ascribed to Ber included cardioprotective, anti-diabetic, anti-inflammatory, antimalarial, antioxidant, anti-hypercholesterolemic, and anti-allergic. Moreover, the synergistic effect of Ber improved the therapeutic potential of different drugs (paclitaxel (PTL), gemcitabine, dexamethasone, doxorubicin (DOX), and celecoxib) in different models. Various attempts could fabricate biologically active derivatives of Ber, such as 4-chlorobenzoyl berbamine (CBB) and O-4- ethoxyl-butyl-berbamine (EBB). The review focuses on the medicinal applications of Ber, particularly anti-cancer, cardioprotective, and anti-inflammatory, along with the mechanism of action.

Nanoparticles incorporated hydrogels for delivery of antimicrobial agents: developments and trends.

The prevention and treatment of microbial infections is an imminent global public health concern due to the poor antimicrobial performance of the existing antimicrobial regime and rapidly emerging antibiotic resistance in pathogenic microbes. In order to overcome these problems and effectively control bacterial infections, various new treatment modalities have been identified. To attempt this, various micro- and macro-molecular antimicrobial agents that function by microbial membrane disruption have been developed with improved antimicrobial activity and lesser resistance. Antimicrobial nanoparticle-hydrogels systems comprising antimicrobial agents (antibiotics, biological extracts, and antimicrobial peptides) loaded nanoparticles or antimicrobial nanoparticles (metal or metal oxide) constitute an important class of biomaterials for the prevention and treatment of infections. Hydrogels that incorporate nanoparticles can offer an effective strategy for delivering antimicrobial agents (or nanoparticles) in a controlled, sustained, and targeted manner. In this review, we have described an overview of recent advancements in nanoparticle-hydrogel hybrid systems for antimicrobial agent delivery. Firstly, we have provided an overview of the nanoparticle hydrogel system and discussed various advantages of these systems in biomedical and pharmaceutical applications. Thereafter, different hybrid hydrogel systems encapsulating antibacterial metal/metal oxide nanoparticles, polymeric nanoparticles, antibiotics, biological extracts, and antimicrobial peptides for controlling infections have been reviewed in detail. Finally, the challenges and future prospects of nanoparticle-hydrogel systems have been discussed.

Citric acid cross-linking of a hydrogel from Aloe vera (Aloe barbadensis M.) engenders a pH-responsive, superporous, and smart material for drug delivery.

The current research work is based on the evaluation of a citric acid (CA) cross-linked Aloe vera (Aloe barbadensis M.) leaf hydrogel (CL-ALH) for pH-dependent and sustained drug release application. The CA was used in different concentrations (1.25, 2.5, 5.0, and 10.0%) to cross-link the ALH using homogenous reaction conditions. The synthesis of CL-ALH was confirmed through Fourier transform and nuclear magnetic resonance spectroscopic studies. The thermal analysis indicated that the ALH and CL-ALH were stable and decomposed in two steps. The scanning electron microscopic images of CL-ALH confirmed its porous nature due to the presence of interconnected channeling. The swelling of CL-ALH was evaluated at pH 1.2, 6.8, and 7.4 as well as in deionized water (DW). High swelling of CL-ALH was observed in DW, and at pH 7.4 and 6.8 whereas, less swelling of CL-ALH was witnessed at pH 1.2. CL-ALH also exhibited swelling/deswelling behavior in DW and ethanol, DW and normal saline, and at pH 7.4 and 1.2. Tablets were prepared from CL-ALH as a release retarding agent demonstrating the sustained release of venlafaxine hydrochloride (VFX) for 8 h. Whereas, VFX was released within 4 h from the ALH-based tablet formulation (un-cross-linked material) indicating the prolonged and sustained release behavior of CL-ALH. The VFX was released from CL-ALH tablets and followed zero-order kinetics. The mechanism followed by VFX release from CL-ALH tablets was non-Fickian diffusion. The in vivo fate of the tablet formulation was observed through an X-ray study. The CL-ALH-based tablet safely passed through the stomach of a stray dog without any significant erosion and then disintegrated in the small intestine and colon. These findings confirmed that the CL-ALH is an effective excipient for designing a sustained-release drug delivery system for the small intestine and colon.

Fabrication and optimization of febuxostat-loaded chitosan nanocarriers for better pharmacokinetics profile.

The current research was planned to enhance the bioavailability of hydrophobic drug after oral administration through the development of a nanoparticle drug delivery system (DDS). Therefore, febuxostat-loaded chitosan nanoparticles (FLC NPs) were prepared using a modified ionic gelation method and optimized the reaction conditions through the design of experiments. Design expert software was used to check the desirability of the central composite design and the interactive effects of the independent variables (chitosan concentration, ratio of chitosan to linker, and pH of the medium) on the response variables (size distribution, zeta potential, polydispersity index (PDI), and entrapment efficiency (EE)) of FLC NPs. All ingredients of the optimized formulation (formulation Q) were compatible with each other as evident from FTIR, PXRD, and TGA studies, and displayed 234.7 nm particle size, 0.158 PDI, 25.8 mV zeta potential, and 76.9 % EE. TEM, SEM, and AFM exhibited a smooth, dense, and uniform structure without any visible pores in the structure of FLC NPs. The in vitro and in vivo drug release studies described a sustained release pattern of febuxostat and increased relative bioavailability by 286.63 %. Considering these findings, this chitosan nanoparticle DDS can further be used for improving the EE and bioavailability of hydrophobic drugs.

Chemical modification of Aloe vera leaf hydrogel for efficient cadmium-removal from spiked high-hardness groundwater.

Herein, the hydrogel from the leaf of the Aloe vera plant (ALH) was succinylated (SALH) and saponified (NaSALH). The FTIR, solid-state CP/MAS 13C NMR, and SEM-EDX spectroscopic analyses witnessed the formation of SALH and NaSALH from ALH. The pHZPC for NaSALH was found to be 4.90, indicating the presence of -ve charge on its surface. The Cd2+ sorption efficiency of NaSALH was found to be dependent on pH, NaALH dose, Cd2+ concentration, contact time, and temperature. The maximum Cd2+ removal from DW and HGW was found to be 227.27 and 212.77 mg g-1 according to the Langmuir isothermal model (>0.99) at pH of 6, NaSALH dose of 40 mg g-1, Cd2+ concentration of 90 mg L-1, contact time of 30 min, and temperature of 298 K. The kinetic analysis of Cd2+ sorption data witnessed that the Cd2+ removal by chemisorption mechanism and followed pseudo-second-order kinetics (>0.99). The -ve values of ΔG° and ΔH° assessed the spontaneous and exothermic nature of sorption of Cd2+ by NaSALH. The regeneration and sorption/desorption studies indicated that the sorbent NaSALH is regenerable.

Polysaccharide-Based Hydrogel from Seeds of Artemisia vulgaris: Extraction Optimization by Box-Behnken Design, pH-Responsiveness, and Sustained Drug Release.

The current research work focuses on the extraction and optimization of the hydrogel (AVM) from the seeds of Artemisia vulgaris using Box-Behnken design-response surface methodology (BBD-RSM). The AVM was obtained through a hot water extraction process. The influence of different factors, including pH (U = 4 to 10), temperature (V = 25 to 110 °C), seed/water ratio, i.e., S/W ratio (W = 1/10 to 1/70 w/v), and seed/water contact time, i.e., S/W time (X = 1 to 12 h) on the yield of AVM was evaluated. The p-value for the analysis of variance (ANOVA) was found to be <0.001, indicating that the yield of AVM mainly depended on the abovementioned factors. The highest yield of AVM, i.e., 15.86%, was found at a pH of 7.12, temperature of 80.04 °C, S/W ratio of 1/33.24 w/v, and S/W time of 8.73 h according to Design-Expert Software. The study of the pH-responsive behavior of AVM in tablet form (formulation AVT3) revealed that AVM is a pH-responsive material with significantly high swelling at pH 7.4. However, less swelling was witnessed at pH 1.2. Moreover, AVM was found to be a sustained release material for esomeprazole at pH 7.4 for 12 h. The drug release from AVT3 was according to the super case-II transport mechanism and zero-order kinetics.

Correction: Recent trends in ozone sensing technology.

Correction for 'Recent trends in ozone sensing technology' by Muhammad Mudassir Iqbal et al., Anal. Methods, 2023, 15, 2798-2822, https://doi.org/10.1039/D3AY00334E.

Recent trends in ozone sensing technology.

The harmful impact of ozone on humans and the environment makes the development of economical, accurate, and efficient ozone monitoring technologies necessary. Therefore, in the present review, we critically discuss developments in the methods for the synthesis of ozone sensing materials such as metal oxides (Ni, Co, Pd, In, Cu, Zn, Fe, Sn, W, Ti and Mo), carbon nanotubes, organic compounds, perovskites, and quartz. Additionally, the recent advancements and innovations in ozone technology will be discussed. In this review, we focus on assembling ozone-sensing devices and developing related wireless communication, data transferring, and analyzing technologies together with satellite, airborne, and ground-based novel ozone-sensing strategies for monitoring the atmosphere, urban areas, and working environments. Furthermore, the developments in ozone-monitoring miniaturized devices technology will be considered. The effects of different factors, such as spatial-temporal variation, humidity, and calibration, on ozone measurements will also be discussed. It is anticipated that this review will bridge the knowledge gaps among materials chemists, engineers, and industry.

Synthesis, Characterization, and Biological Evaluation of Meldrum's Acid Derivatives: Dual Activity and Molecular Docking Study.

In the presented study, eight novel Meldrum's acid derivatives containing various vanillic groups were synthesized. Vanillidene Meldrum's acid compounds were tested against different cancer cell lines and microbes. Out of nine, three showed very good biological activity against E. coli, and HeLa and A549 cell lines. It is shown that the O-alkyl substituted derivatives possessed better antimicrobial and anticancer activities in comparison with the O-acyl ones. The decyl substituted molecule (3i) has the highest activity against E. coli (MIC = 12.4 µM) and cancer cell lines (HeLa, A549, and LS174 = 15.7, 21.8, and 30.5 µM, respectively). The selectivity index of 3i is 4.8 (HeLa). The molecular docking study indicates that compound 3i showed good binding affinity to DNA, E. coli Gyrase B, and topoisomerase II beta. The covalent docking showed that 3i was a Michael acceptor for the nucleophiles Lys and Ser. The best Eb was noted for the topoisomerase II beta-LYS482-3i cluster.

Determination of Copper at Extended Dose Levels of Copper (II)-acetylsalicylate and Pharmacokinetics Applications.

Rheumatoid arthritis has long been treated with acetylsalicylic acid, despite many side effects, including gastric ulcers. These side effects can be curtailed by preparing the metal complexes of8 acetylsalicylic acid, such as copper (II)-acetylsalicylate (CAS). Present study evaluates the pharmacokinetics parameters of CAS and the level of copper at extended dose levels using rabbit model. The concentrations of CAS and copper in plasma samples were determined by validated HPLC and atomic absorption spectroscopic (AAS) methods, respectively. Three doses, 1-3 mg Kg-1 were orally administered to six rabbits with two wash out periods. The blood samples were collected at different time intervals for 24 hours. The peak drug concentration (Cmax) for these doses at a time to peak drug concentration (tmax) 0.5 h was determined to be 0.38, 0.76 and 1.14 µg mL-1. The half-life of drug (t1/2) was 8.67, 8.73 and 8.81 h, which are perfect results for once a day dosing. The values of volume of distribution (Vd) and clearance (Cl) for CAS were 829, 833 and 837 L Kg-1 and 66.30, 66.74 and 66.95 L h-1, respectively. The AAS results showed that copper levels in rabbit blood plasma were increased with increasing the dosage of CAS, but still remains under the safer limit, which was twofold higher than the reported safe limit.

Fabrication of Stimuli-Responsive Quince/Mucin Co-Poly (Methacrylate) Hydrogel Matrices for the Controlled Delivery of Acyclovir Sodium: Design, Characterization and Toxicity Evaluation.

Free-radical polymerization technique was adopted to fabricate a stimuli-responsive intelligent quince/mucin co-poly (methacrylate) hydrogel for the controlled delivery of acyclovir sodium. The developed hydrogel matrices were appraised using different parameters, such as drug loading (%), swelling kinetics, pH- and electrolyte-responsive swelling, and sol-gel fraction. Drug-excipient compatibility study, scanning electron microscopy, thermal analysis, powder X-ray diffraction (PXRD) analysis, in vitro drug release studies, drug release kinetics and acute oral toxicity studies were conducted. The results of drug loading revealed an acyclovir sodium loading of 63-75% in different formulations. The hydrogel discs exhibited pH-responsive swelling behavior, showing maximum swelling in a phosphate buffer with a pH of 7.4, but negligible swelling was obvious in an acidic buffer with a pH of 1.2. The swelling kinetics of the developed hydrogel discs exhibited second-order kinetics. Moreover, the hydrogel discs responded to the concentration of electrolytes (CaCl2 and NaCl). The results of the FTIR confirm the formation of the hydrogel via free-radical polymerization. However, the major peaks of acyclovir remain intact, proving drug-excipient compatibility. The results of the SEM analysis reveal the porous, rough surface of the hydrogel discs with multiple cracks and pores over the surface. The results of the PXRD disclose the amorphous nature of the fabricated hydrogel. The dissolution studies showed a minor amount of acyclovir sodium released in an acidic environment, while an extended release up to 36 h in the phosphate buffer was observed. The drug release followed Hixen-Crowell's kinetics with Fickian diffusion mechanism. The toxicity studies demonstrated the non-toxic nature of the polymeric carrier system. Therefore, these results signify the quince/mucin co-poly (methacrylate) hydrogel as a smart material with the potential to deliver acyclovir into the intestine for an extended period of time.

A pH responsive and superporous biocomposite hydrogel of Salvia spinosa polysaccharide-co-methacrylic acid for intelligent drug delivery.

Herein, a drug delivery system (SSH-co-MAA) based on the mucilage from seeds of Salvia spinosa (SSH; polymer) and methacrylic acid (MAA; monomer) is introduced for the controlled delivery of venlafaxine HCl using a sustainable chemical approach. The optimized conditions for the designing of the ideal formulation (M4) of SSH-co-MAA were found to be 2.5% (w/w) of SSH, 30.0% (w/w) of MAA, 0.4% (w/w) of both N,N'-methylene-bis-acrylamide (MBA; cross-linker) and potassium persulfate (KPS; initiator). The structure characterization of SSH-co-MAA by Fourier transform infrared and solid-state CP/MAS 13C-NMR spectroscopy has confirmed the grafting of MAA onto SSH. The thermogravimetric analysis revealed that SSH-co-MAA is a stable entity before and after loading of the venlafaxine HCl-loaded SSH-co-MAA (VSSH-co-MAA). Scanning electron microscopy images of SSH-co-MAA after swelling then freeze drying showed the superporous nature of the hydrogel. The gel fraction (%) of SSH-co-MAA depended upon concentration of SSH, MAA, and MBA. The porosity (%) was increased with the increase in the concentration of SSH and decreased with the decrease in the concentration of MAA and MBA. The swelling indices, venlafaxine HCl loading, and release (24 h at the pH of the gastrointestinal tract) from VSSH-co-MAA were found to be dependent on the pH of the swelling media and the concentration of SSH, MAA, and MBA. The release of venlafaxine HCl followed non-Fickian diffusion mechanism. Conclusively, SSH-co-MAA is a novel material for potential application in targeted drug delivery applications.

Covalent Organic Frameworks (COFs) as Multi-Target Multifunctional Frameworks.

Covalent organic frameworks (COFs), synthesized from organic monomers, are porous crystalline polymers. Monomers get attached through strong covalent bonds to form 2D and 3D structures. The adjustable pore size, high stability (chemical and thermal), and metal-free nature of COFs make their applications wider. This review article briefly elaborates the synthesis, types, and applications (catalysis, environmental Remediation, sensors) of COFs. Furthermore, the applications of COFs as biomaterials are comprehensively discussed. There are several reported COFs having good results in anti-cancer and anti-bacterial treatments. At the end, some newly reported COFs having anti-viral and wound healing properties are also discussed.

A Smart Hydrogel from Salvia spinosa Seeds: pH Responsiveness, On-off Switching, Sustained Drug Release, and Transit Detection.

BACKGROUND: The use of synthetic and semi-synthetic materials in drug delivery systems has associated drawbacks like costly synthesis, toxicity, and biocompatibility issues. Therefore, there is a need to introduce novel materials to overcome such issues. Naturally occurring and water-swellable polysaccharides are advantageous in overcoming the above-mentioned issues. Therefore, we are reporting a novel hydrogel (SSH) isolated from the seeds of Salvia spinosa as a sustained release material. METHODS: SSH was explored for its pH-dependent and salt-responsive swelling before and after compression in a tablet form. Stimuli-responsive swelling and deswelling were also monitored at pH 7.4 and pH 1.2 in deionized water (DW) and normal saline and DW and ethanol. The sustained-release potential of SSH-based tablets was monitored at gastrointestinal tract (GIT) pH. The transit of SSH tablets was ascertained through an X-ray study. RESULTS: The swelling of SSH in powder and tablet form was found in the order of DW > pH 7.4 > pH 6.8 > pH 1.2. An inverse relation was found between the swelling of SSH and the concentration of the salt solution. The SSH showed stimuli-responsive swelling and de-swelling before and after compression, indicating the unaltered nature of SSH even in a closely packed form, i.e., tablets. Sustained release of theophylline (< 80%) was witnessed at pH 6.8 and 7.4 during the 12 h study following zeroorder kinetics, and radiographic images also showed 9 h retention in GIT. CONCLUSION: These investigations showed the potential of SSH as a pH-sensitive material for sustained and targeted drug delivery.

Development and evaluation of Artemisia vulgaris mucilage based polymeric network for controlled drug delivery.

The present study was conducted to fabricate and compare pH-sensitive polymeric networks of Artemisia vulgaris- Methacrylic acid using free radical polymerization conventional method and microwave-assisted method. Potassium persulphate and N' N'- Methylene bisacrylamide were employed as an initiator-crosslinker system. Swelling studies were performed at pH 1.2, 4.5, 6.8 and 7.4. Concentrations of polymer and monomer along with radiation dose were optimized as a function of swelling. Porosity and gel fraction were calculated for all samples. FTIR study confirmed the formation of cross-linked networks. Results of SEM indicated that the microwave irradiated polymeric network had a more porous structure. DSC and XRD study indicated the entrapment of drug inside the polymeric networks in amorphous form. In comparison to the conventional method, the polymeric network prepared by the microwave-assisted method exhibited high swelling ratios, porosity, thermal stability and drug release. These results signify microwave radiations as an effective alternative to the conventional heating method.

Extraction Optimization of Mucilage from Seeds of Mimosa pudica by Response Surface Methodology.

Mimosa pudica seed mucilage (MPM) is composed of glucuronoxylan, which is a swellable, pH-responsive and non-toxic biomaterial. Herein, we aimed to extract MPM from M. pudica seeds (MP seeds) to ascertain optimization of extraction conditions to get highest yield by response surface methodology, via Box-Behnken design (RSM-BBD). MPM was extracted from MP seeds by a hot water extraction method. The effects of four different parameters on the extraction yield of MPM were evaluated: pH of the extraction medium (1-10), seed/water contact time (1-12 h), the temperature of extraction medium (30-90 °C), and seed/water ratio (1:5-1:35 w/v). The maximum yield of MPM obtained by Design-Expert software was 10.66% (10.66 g/100 g) at pH 7, seed/water contact time of 6 h, extraction temperature of 50 °C, and seed/water ratio of 1:20 w/v. The p values of ANOVA were found to be less than 0.0001, which indicated that the extraction yield of MPM was significantly affected by all the study parameters. The results revealed that pH and extraction temperature were the most significant factors affecting the yield of MPM. MPM in compressed tablet form showed pH-responsive on-off switching behavior at pH 7.4 and 1.2 in a reversible manner. MPM in compressed tablet form sustained the release of itopride for 16 h following a super case-II transport mechanism and zero-order release kinetics.

Metal Complexation of Arabinoxylan Engenders a Smart Material Offering pH, Solvents, and Salt Responsive On-Off Swelling with the Potential for Sustained Drug Delivery.

The present study aimed to develop a stable interconnected matrix as a sustained release drug delivery material. Arabinoxylan (AX) was extracted from ispaghula husk and then crosslinked with different concentrations, i.e., 0.5, 1.0, and 1.5 g of CaCl2 per 0.25 g of AX. The crosslinking was confirmed through Fourier transform infrared spectroscopy. The swelling capacity of crosslinked AX (CL-AX) was evaluated against buffer solutions of pH 1.2, 6.8, 7.4, and water. The swelling capacity increased from pH 1.2 to pH 7.4 and followed the second order swelling kinetics. The swelling study also revealed that CL-AX with 1.0 g CaCl2 showed maximum swelling capacity. The swelling-deswelling (on-off switching) behavior of CL-AX was evaluated in water-ethanol, water-0.9% NaCl solution, and buffer solutions of pH 7.4-1.2 and showed responsive swelling-deswelling behavior. Scanning electron microscopy revealed a highly porous nature of CL-AX with a mesh of thin fibrous networking. Hemocompatibility studies of CL-AX revealed its non-thrombogenic and nonhemolytic attributes. The CL-AX matrix tablet prolonged the release of enalapril maleate for 24 h, and the drug release followed the zero order kinetics and super case-II transport mechanism. Therefore, CL-AX can be recognized as a stimuli responsive and hemocompatible biomaterial with sustained drug release potential.

Pharmaceutical and Pharmacological Evaluation of Amoxicillin after Solubility Enhancement Using the Spray Drying Technique.

The dose frequency of drugs belonging to class II is usually high and associated with harmful effects on the body. The study aimed to enhance the solubility of the poorly water-soluble drug amoxicillin (AM) by the solid dispersion (SD) technique. Six different SDs of AM, F1-F6, were prepared by the spray drying technique using two other carriers, HP-ß-CD (F1-F3) and HPMC (F4-F6), in 1:1, 1:2, and 1:3 drug-to-polymer ratios. These SDs were analyzed to determine their practical yield, drug content, and aqueous solubility using analytical techniques such as Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis, and powder X-ray diffraction. The effect of polymer concentration on SDs was determined using aqueous solubility, in vitro dissolution, and in vivo studies. The results showed no drug-polymer interactions in SDs. Solubility studies showed that SDs based on the drug-to-polymer ratio of 1:2 (F2 and F5) were highly soluble in water compared to those with ratios of 1:1 and 1:3. In vitro dissolution studies also showed that SDs with a ratio of 1:2 released the highest drug concentration from both polymeric systems. The SDs based on HPMC confirmed the more sustained release of the drug as compared to that of HP-ß-CD. All the SDs were observed as stable and amorphous, with a smooth spherical surface. In vivo studies reveal the enhancement of pharmacokinetics parameters as compared to standard AM. Hence, it is confirmed that spray drying is an excellent technique to enhance the solubility of AM in an aqueous medium. This may contribute to the enhancement of the pharmacokinetic behaviors of SDs.