Effect of flanged diffuser divergence angle on wind turbine: A numerical investigation.

Power augmentation in a small-scale horizontal axis wind turbine, with its rotor encased in a flanged diffuser is explored. The power output of the wind turbine varies with changes in the diffuser design and the resulting back pressure. Reduction in this back pressure also results in early flow separation at the diffuser surface, which hinders turbine performance. The main aim of this study is to numerically investigate the local configuration of the wind turbine location inside the diffuser by varying diffuser angles and wind speeds. Therefore, shroud and flange were modeled and analyzed using the computational fluid dynamic (CFD) analyses and experiments were performed at two wind speeds 6 m/s and 8 m/s with and without the diffuser for model validation. The divergence angle of 4° was found to have no flow separation, thus maximizing flow rate. The proposed design shows wind speed improvement of up to 1.68 times compared to the baseline configuration. The corresponding optimum flange height was found to be 250 mm. However, increasing the divergence angle had a similar output. The dimensionless location of wind turbine was found to be between 0.45 and 0.5 for 2° and 4° divergence angle respectively. Furthermore, the maximum augmentation location varies with wind speed and diffuser's divergence angle as described by dimensionless location of wind turbine, thus presenting a noteworthy contribution to the horizontal axis wind turbine area with the flanged diffuser.

Analysis of Particle Size and Concentration in Die Sinking Electric Discharge Machining.

Electric discharge machining with a powder mix dielectric is a promising technique to harden a work piece's surface using electricity with a high energy density. The quality of the electrical discharge-machined surface is related to its surface integrity in which the surface's roughness, residual stresses, micro hardness and surface micro cracks are some of the major factors. In this research, graphite powder was mixed in a dielectric with a particle size of 20 µm, 30 µm, and 40 µm, with the concentration of the graphite powder ranging from 2 g/L to 4 g/L. Moreover, the peak current and pulse time on were also coupled with an additive of graphite powder to investigate the effect on the surface quality, i.e., the recast layer thickness, micro hardness and crater depth as well as the material removal rate (MRR) and tool wear rate (TWR). A Box-Behnken design was employed to design the experiments and the experimental results revealed that the graphite powder size and concentration coupled with the electrical parameters (peak current and pulse time on) significantly influenced the recast layer thickness, micro hardness, crater size, MRR and TWR. The crater depth and micro hardness were maximized at a higher concentration and particle size, while the recast layer thickness was reduced with a higher gain size.

Chitosan oligosaccharide (COS): An overview.

The frequently studied polysaccharide, chitosan oligosaccharide/chitooligosaccharide (COS) is the major degradation product of chitosan/chitin via chemical hydrolysis or enzymatic degradation involving deacetylation and depolymerization processes. Innumerable studies have revealed in the recent decade that COS has various promising biomedical implications in the past analysis, current developments and potential applications in a biomedical, pharmaceutical and agricultural sector. Innovations into COS derivatization has broadened its application in cosmeceutical and nutraceutical productions as well as in water treatment and environmental safety. In relation to its parent biomaterials and other available polysaccharides, COS has low molecular weight (Mw), higher degree of deacetylation (DD), higher degree of polymerization (DP), less viscous and complete water solubility, which endowed it with significant biological properties like antimicrobial, antioxidant, anti-inflammatory and antihypertensive, as well as drug/DNA delivery ability. In addition, it is also revealed to exhibit antidiabetic, anti-obesity, anti-HIV-1, anti-Alzheimer's disease, hypocholesterolemic, calcium absorption and hemostatic effects. Furthermore, COS is shown to have higher cellular transduction and completely absorbable via intestinal epithelium due to its cationic sphere exposed on the more exposed shorter N-glucosamine (N-Glc) units. This paper narrates the recent developments in COS biomedical applications while paying considerable attention to its physicochemical properties and its chemical composition. Its pharmacokinetic aspects are also briefly discussed while highlighting potential overdose or lethal dosing. In addition, due to its multiple NGlc unit composition and vulnerability to degradation, its safety is given significant attention. Finally, a suggestion is made for extensive study on COS anti-HIV effects with well-refined batches.