Graphene-Encapsulated Bifunctional Catalysts with High Activity and Durability for Zn-Air Battery.

Carbon-based electrocatalysts with both high activity and high stability are desirable for use in Zn-air batteries. However, the carbon corrosion reaction (CCR) is a critical obstacle in rechargeable Zn-air batteries. In this study, a cost-effective carbon-based novel material is reported with a high catalytic effect and good durability for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), prepared via a simple graphitization process. In situ growth of graphene is utilized in a 3D-metal-coordinated hydrogel by introducing a catalytic lattice of transition metal alloys. Due to the direct growth of few-layer graphene on the metal alloy decorated 3d-carbon network, greatly reduced CCR is observed in a repetitive OER test. As a result, an efficient bifunctional electrocatalytic performance is achieved with a low ΔE value of 0.63 V and good electrochemical durability for 83 h at a current density of 10 mA cm-2 in an alkaline media. Moreover, graphene-encapsulated transition metal alloys on the nitrogen-doped carbon supporter exhibit an excellent catalytic effect and good durability in a Zn-air battery system. This study suggests a straightforward way to overcome the CCR of carbon-based materials for an electrochemical catalyst with wide application in energy conversion and energy storage devices.

Foldable batteries: from materials to devices.

Wearable electronics is a growing field that has important applications in advanced human-integrated systems with high performance and mechanical deformability, especially foldable characteristics. Although foldable electronics such as rollable TVs (LG signature OLED R) or foldable smartphones (Samsung Galaxy Z fold/flip series) have been successfully established in the market, these devices are still powered by rigid and stiff batteries. Therefore, to realize fully wearable devices, it is necessary to develop state-of-the-art foldable batteries with high performance and safety in dynamic deformation states. In this review, we cover the recent progress in developing materials and system designs for foldable batteries. The Materials section is divided into three sections aimed at helping researchers choose suitable materials for their systems. Several foldable battery systems are discussed and the combination of innovative materials and system design that yields successful devices is considered. Furthermore, the basic analysis process of electrochemical and mechanical properties is provided as a guide for researchers interested in the evaluation of foldable battery systems. The current challenges facing the practical application of foldable batteries are briefly discussed. This review will help researchers to understand various aspects (from material preparation to battery configuration) of foldable batteries and provide a brief guideline for evaluating the performance of these batteries.

Preparation and Electrochemical Characterization of Si@C Nanoparticles as an Anode Material for Lithium-Ion Batteries via Solvent-Assisted Wet Coating Process.

Silicon-based electrodes are widely recognized as promising anodes for high-energy-density lithium-ion batteries (LIBs). Silicon is a representative anode material for next-generation LIBs due to its advantages of being an abundant resource and having a high theoretical capacity and a low electrochemical reduction potential. However, its huge volume change during the charge-discharge process and low electrical conductivity can be critical problems in its utilization as a practical anode material. In this study, we solved the problem of the large volume expansion of silicon anodes by using the carbon coating method with a low-cost phenolic resin that can be used to obtain high-performance LIBs. The surrounding carbon layers on the silicon surface were well made from a phenolic resin via a solvent-assisted wet coating process followed by carbonization. Consequently, the electrochemical performance of the carbon-coated silicon anode achieved a high specific capacity (3092 mA h g-1) and excellent capacity retention (~100% capacity retention after 50 cycles and even 64% capacity retention after 100 cycles at 0.05 C). This work provides a simple but effective strategy for the improvement of silicon-based anodes for high-performance LIBs.

Comparison of maximum strength, proprioceptive, dynamic balance, maximum joint angle of stability and instability ankle by Cumberland Ankle Instability Tool.

[Purpose] The purpose of this study was to investigate the factors of ankle instability by using Cumberland ankle instability tool (CAIT), which have been frequently used as ankle instability tools. The participants were divided into the normal ankle group and the instability ankle group. Maximum strength, proprioception, dynamic balance and maximum rage of joint motion were compared in order to find out factors of instability in the questionnaires. [Participants and Methods] A total of 44 participants were classified into the control (CON) group and the chronic ankle instability (CAI) group according to questionnaire types. Muscle strength, proprioception, dynamic balance and maximum joint angle were measured. The independent t-test was used. [Results] In the case of maximum ankle strength, it showed significance in CON group and CAI group ankle dorsiflexion and plantarflexion. In proprioception, it showed significance in CON group and CAI group. In dynamic balance, it showed significance in anterior (ANT) direction of the CON group and CAI group. Maximum joint angle produced significance in dorsiflexion of CON group and CAI group. [Conclusion] Information on maximum strength, proprioception, dynamic balance of anterior direction, and maximum joint angle of dorsiflexion is available through questionnaire CAIT.

Rational Design of a High Performance and Robust Solar Evaporator via 3D-Printing Technology.

Utilizing the broad-band solar spectrum for sea water desalination is a promising method that can provide fresh water without sophisticated infrastructures. However, the solar-to-vapour efficiency has been limited due to the lack of a proper design for the evaporator to deal with either a large amount of heat loss or salt accumulation. Here, these issues are addressed via two cost-effective approaches: I) a rational design of a concave shaped supporter by 3D-printing that can promote the light harvesting capacity via multiple reflections on the surface; II) the use of a double layered photoabsorber composed of a hydrophilic bottom layer of a polydopamine (PDA) coated glass fiber (GF/C) and a hydrophobic upper layer of a carbonized poly(vinyl alcohol)/polyvinylpyrrolidone (PVA/PVP) hydrogel on the supporter, which provides competitive benefit for preventing deposition of salt while quickly pumping the water. The 3D-printed solar evaporator can efficiently utilize solar energy (99%) with an evaporation rate of 1.60 kg m-2 h-1 and efficiency of 89% under 1 sun irradiation. The underlying reason for the high efficiency obtained is supported by the heat transfer mechanism. The 3D-printed solar evaporator could provide cheap drinking water in remote areas, while maintaining stable performance for a long term.

Graphitization with Suppressed Carbon Loss for High-Quality Reduced Graphene Oxide.

An efficient reduction method to obtain high-quality graphene sheets from mass-producible graphene oxide is highly desirable for practical applications. Here, we report an in situ deoxidation and graphitization mechanism for graphene oxide that allows for high-quality reduced graphene oxide sheets under the low temperature condition (<300 °C) by utilizing a well-known Fischer-Tropsch reaction catalyst (CuFeO2). By applying modified FTR conditions, where graphene oxide was reduced on the catalyst surface under the hydrogen-poor condition, deoxidation with much suppressed carbon loss was possible, resulting in high-quality graphene sheets. Our experimental data and density functional theory calculations proved that reduction which occurred on the CuFeO2 surface preferentially removed adsorbed oxygen atoms in graphene oxide sheets, leaving dissociated carbon structures to be restored to a near-perfect few-layer graphene sheet. TGA-mass data revealed that GO with catalysts released 92.8% less carbon-containing gases than GO without catalysts during the reduction process, which suggests that this process suppressed carbon loss in graphene oxide sheets, leading to near-perfect graphene. The amount of oxygen related to the epoxide group in the basal plane of GO significantly decreased to near zero (from 43.84 to 0.48 at. %) in catalyst-assisted reduced graphene oxide (CA-rGO). The average domain size and the density of defects of CA-rGO were 4 times larger and 0.1 times lower than those for thermally reduced graphene oxide (TrGO), respectively. As a result, CA-rGO had a 246 and 8 times lower electrical resistance than TrGO and CVD-graphene. With these performances, CA-rGO coated paper connected to a coin-cell battery successfully lit an LED bulb, and CA-rGO itself acted as an efficient catalyst for both the hydrogen evolution reaction and the oxygen evolution reaction.

Differences of quadriceps activity during inline lunge by using FMS assessment.

[Purpose] This study assessed the exercise capacity of healthy adults while performing the inline lunge exercise by using Functional Movement Screen (FMS). Compared the difference in muscle activity of the quadriceps according to the exercise capacity. [Participants and Methods] Thirty two healthy participants (12 males, 20 females) participated in this study. The surface electromyography (sEMG) was used to measure the electrical activities for the vastus medialis (VM), rectus femoris (RF), vastus lateralis (VL) of quadriceps. [Results] Both groups had significant difference when sitting up and getting up during the inline lunge. In scores 3 group, vastus medialis showed higher muscle activity than vastus lateralis. On contrary, in scores 2 group, vastus lateralis had higher muscle activity than vastus medialis. [Conclusion] Therefore, this study suggests that inline lunge can help to strengthen the quadriceps effectively by showing the difference of quadriceps activity according to exercise capacity.

Influence of muscle activation of posterior oblique sling from changes in activation of gluteus maximus from exercise of prone hip extension of normal adult male and female.

[Purpose] There have been many study ipsilateral erector spinae in regard of prone hip extension (PHE). However, mediating methods have been focusing on the reinforcement of gluteus. Hereupon, this study is intended to identify how an increase of gluteus maximus influences on posterior oblique sling (POS) and suggest a mediating method to effectively reinforce them. This study shows the seclective POS strength exercise. [Participants and Methods] This study has been conducted on normal male (13) and female (13), and participants were asked to proceed PHE exercise and prone hip extension with hip abduction with knee flexion (PHEAKF). Surface electromyography (EMG) was recorded from the contralateral latissimus dorsi, contralateral erector spinae, ipsilateral erector spinae, ipsilateral gluteus maximus, and ipsilateral biceps femoris. A paried t-test was used to compare muscle activity POS. [Results] EMG activity of the contralateral latissimus dorsi, ipsilateral erector spinae, and ipsilateral gluteus maximus was significantly greater performed PHEAKF than PHE. As for ipsilateral biceps femoris, muscle activation was lower in PHEAKF than PHE. [Conclusions] According to the results of this study, increase in muscular activation from the direction of muscular fiber and posterior oblique sling seems to be an important factor that influencontralateral crector spinae on muscular activation of POS.

Highly Enhanced Raman Scattering on Carbonized Polymer Films.

We have discovered a carbonized polymer film to be a reliable and durable carbon-based substrate for carbon enhanced Raman scattering (CERS). Commercially available SU8 was spin coated and carbonized (c-SU8) to yield a film optimized to have a favorable Fermi level position for efficient charge transfer, which results in a significant Raman scattering enhancement under mild measurement conditions. A highly sensitive CERS (detection limit of 10-8 M) that was uniform over a large area was achieved on a patterned c-SU8 film and the Raman signal intensity has remained constant for 2 years. This approach works not only for the CMOS-compatible c-SU8 film but for any carbonized film with the correct composition and Fermi level, as demonstrated with carbonized-PVA (poly(vinyl alcohol)) and carbonized-PVP (polyvinylpyrollidone) films. Our study certainly expands the rather narrow range of Raman-active material platforms to include robust carbon-based films readily obtained from polymer precursors. As it uses broadly applicable and cheap polymers, it could offer great advantages in the development of practical devices for chemical/bio analysis and sensors.