Enhanced Decomposition of Ammonium Perchlorate-Ethyl Cellulose-Molybdenum Disulfide Nanocomposites.

Ammonium perchlorate (AP) is commonly used in propulsion technology. Recent studies have demonstrated that two-dimensional (2D) nanomaterials such as graphene (Gr) and hexagonal boron nitride (hBN) dispersed with nitrocellulose (NC) can conformally coat the surface of AP particles and enhance the reactivity of AP. In this work, the effectiveness of ethyl cellulose (EC) as an alternative to NC was studied. Using a similar encapsulation procedure as in recent work, Gr and hBN dispersed with EC were used to synthesize the composite materials Gr-EC-AP and hBN-EC-AP. Additionally, EC was used because the polymer can be used to disperse other 2D nanomaterials, specifically molybdenum disulfide (MoS2), which has semiconducting properties. While Gr and hBN dispersed in EC had a minimal effect on the reactivity of AP, MoS2 dispersed in EC significantly enhanced the decomposition behavior of AP compared to the control and other 2D nanomaterials, as evidenced by a pronounced low-temperature decomposition event (LTD) centered at 300 °C and then complete high-temperature decomposition (HTD) below 400 °C. Moreover, thermogravimetric analysis (TGA) showed a 5% mass loss temperature (Td5%) of 291 °C for the MoS2-coated AP, which was 17 °C lower than the AP control. The kinetic parameters for the three encapsulated AP samples were calculated using the Kissinger equation and confirmed a lower activation energy pathway for the MoS2 (86 kJ/mol) composite compared to pure AP (137 kJ/mol). This unique behavior of MoS2 is likely due to enhanced oxidation-reduction of AP during the initial stages of the reaction via a transition metal-catalyzed pathway. Density functional theory (DFT) calculations showed that the interactions between AP and MoS2 were stronger than AP on the Gr or hBN surfaces. Overall, this study complements previous work on NC-wrapped AP composites and demonstrates the unique roles of the disperagent and 2D nanomaterial in tuning the thermal decomposition of AP.

Effects of support and oxygen vacancies on the energetics of NiO reduction with H2 for the chemical looping combustion (CLC) reaction; a DFT study.

Chemical looping combustion (CLC) technology is an innovative energy conversion technology that employs oxygen carriers (OC), typically metal oxides, to burn fossil fuels with a minimal carbon footprint. The performance of OCs can be enhanced by the support on which they are deposited through two mechanisms acting at different scales, viz., microstructural and synergetic effects. In this work, the synergetic effect of NiO supported on TiO2 in reaction with hydrogen as a fuel is studied using density functional theory (DFT). Changes in the energetics of the NiO-hydrogen reaction are explained as a consequence of the interaction between the TiO2 support and NiO. The results indicate that the electronic interaction of the TiO2 support with NiO lowers the energy of intermediate states and the energy of the reaction. The effect of TiO2 increases with the creation of more O vacancies as the reaction proceeded. This enhanced reactivity of the NiO-hydrogen reaction is attributed to both an electronic effect of TiO2 and a geometric effect due to O vacancy creation. The synergetic effect of the support on the OC reactions at the atomic level reported here can pave the path to differentiate the electronic and geometric effects and establish the knowledge for the rational design of OC and support systems.

Ultrasensitive and Label-Free Detection of the Measles Virus Using an N-Heterocyclic Carbene-Based Electrochemical Biosensor.

With the current intense need for rapid and accurate detection of viruses due to COVID-19, we report on a platform technology that is well suited for this purpose, using intact measles virus for a demonstration. Cases of infection due to the measles virus are rapidly increasing, yet current diagnostic tools used to monitor for the virus rely on slow (>1 h) technologies. Here, we demonstrate the first biosensor capable of detecting the measles virus in minutes with no preprocessing steps. The key sensing element is an electrode coated with a self-assembled monolayer containing the measles antibody, immobilized through an N-heterocyclic carbene (NHC). The intact virus is detected by changes in resistance, giving a linear response to 10-100 µg/mL of the intact measles virus without the need to label or process the sample. The limit of detection is 6 µg/mL, which is at the lower limit of concentrations that can cause infections in primates. The NHC-based biosensors are shown to be superior to thiol-based systems, producing an approximately 10× larger response and significantly greater stability toward repeated measurements and long-term storage. This NHC-based biosensor thus represents an important development for both the rapid detection of the measles virus and as a platform technology for the detection of other biological targets of interest.