Effect of Germinated Sorghum Extract on the Physical and Thermal Properties of Pre-Gelatinized Cereals, Sweet Potato and Beans Starches.

Starches from different botanical sources are affected in the presence of enzymes. This study investigated the impact of α-amylase on several properties of pre-gelatinized starches derived from chickpea (Cicer arietinum L.), wheat (Triticum aestivum L.), corn (Zea mays L.), white beans (Phaseolus vulgaris), and sweet potatoes (Ipomoea batatas L.). Specifically, the water holding capacity, freezable water content, sugar content, and water sorption isotherm (adsorption and desorption) properties were examined. The source of α-amylase utilized in this study was a germinated sorghum (Sorghum bicolor L. Moench) extract (GSE). The starch samples were subjected to annealing at temperatures of 40, 50, and 60 °C for durations of either 30 or 60 min prior to the process of gelatinization. A significant increase in the annealing temperature and GSE resulted in a notable enhancement in both the water-holding capacity and the sugar content of the starch. The ordering of starches in terms of their freezable water content is as follows: Chickpea starch (C.P.S) > white beans starch (W.B.S) > wheat starch (W.S) > chickpea starch (C.S) > sweet potato starch (S.P.S). The Guggenheim-Anderson-de Boer (GAB) model was only employed for fitting the data, as the Brunauer-Emmett-Teller (BET) model had a low root mean square error (RMSE). The application of annealing and GSE treatment resulted in a shift of the adsorption and desorption isotherms towards greater levels of moisture content. A strong hysteresis was found in the adsorption and desorption curves, notably within the water activity range of 0.6 to 0.8. The GSE treatment and longer annealing time had an impact on the monolayer water content (mo), as well as the C and K parameters of the GAB model, irrespective of the annealing temperature. These results can be used to evaluate the applicability of starch in the pharmaceutical and food sectors.

Exploring the Role of Acacia (Acacia seyal) and Cactus (Opuntia ficus-indica) Gums on the Dough Performance and Quality Attributes of Breads and Cakes.

Two hydrocolloids, acacia gum and cactus gum, were tested in the current study to see if they could improve the quality of the dough or have an effect on the shelf life of pan bread and sponge cake. Both gums considerably (p < 0.05) enhanced the dough development time, softness, and mixing tolerance index while decreasing the water absorption. Although the dough was more stable with the addition of acacia gum than with cactus gum, the control sample had the highest peak, final, breakdown, and setback viscosities. Acacia gum, on the other hand, resulted in a higher wheat-flour-slurry pasting temperature (84.07 °C) than cactus gum (68.53 °C). The inclusion of both gums, particularly 3%, reduces the gel's textural hardness, gumminess, chewiness, springiness, and adhesiveness. Lightness (L*) and yellowness (b*) were both increased by the addition of acacia gum to bread and cake, whereas the addition of cactus gum increased both color parameters for cakes. The use of acacia gum increased the bread and cake's volume. Cactus gum, on the other hand, caused a decrease in bread hardness after 24 h and 96 h. The cake containing acacia gum, on the other hand, was the least stiff after both storage times. Similarly, sensory attributes such as the crumb color and overall acceptability of the bread and cake were improved by 3% with acacia gum. For these and other reasons, the addition of cactus and acacia gums to bread and cake increased their organoleptic qualities, controlled staining, and made them softer.

Effect of Ziziphus and Cordia Gums on Dough Properties and Baking Performance of Cookies.

The influence of 2% and 5% Cordia (CG) and Ziziphus (ZG) gums on dough characteristics and cookie quality was investigated. Micro-DoughLab, a texture analyzer (TA), a rapid viscoanalyzer (RVA), and solvent retention capacity were used to examine the effect of CG and ZG gums on dough physicochemical parameters (SRC) and cookie quality. The diameter, thickness, spread, and sensory evaluation of cookies were evaluated. With the addition of CG and ZG, dough softness, mixing time, and mixing tolerance index (MTI) increased, whereas stability and water absorption decreased. TA data showed that adding gums resulted in softer and less sticky doughs than the control, whereas RVA data showed that adding CG resulted in a significant increase in peak viscosity, but no change in flour gel setback. In comparison to the control and CG samples, the ZG samples exhibited the most dough extensibility. The thickness and diameter of the cookies increased but the spread decreased, due to the added gums. The gum-containing cookies had a lower overall acceptability by panelists than the control, although only by a small margin. Gum-containing cookies, on the other hand, can deliver up to 5% soluble fiber.

Acetylated corn starch as a fat replacer: Effect on physiochemical, textural, and sensory attributes of beef patties during frozen storage.

Acetylated corn starch was used as a fat replacer in beef patties and its effect on the physicochemical, textural, and sensory attributes of the patties was assessed during frozen storage (-20 °C) for 60 days. The results showed that acetylated corn starch enhanced the redness, moisture retention, thickness, and sensory attributes of the patties (P ≤ 0.05). It also reduced the firmness, cooking loss, diameter reduction rate, and dimensional shrinkage of the patties (P ≤ 0.05). The patties contain 15% acetylated corn starch showed a microstructure similar to that contain 15% animal fat as examined by scanning electron microscopy. Patties containing acetylated corn starch showed high scores of physicochemical properties and sensory attributes, which revealed the beneficial use of this modified starch in meat industry. In conclusion, acetylated corn starch improved the physicochemical properties and sensory attributes of beef patties and can thus be used as fat replacer in meat products.

Functionality of Cordia and Ziziphus Gums with Respect to the Dough Properties and Baking Performance of Stored Pan Bread and Sponge Cakes.

The functionality of hydrocolloids of different origins, gum Cordia (GC), and gum ziziphus (GZ) on pan bread and sponge cake quality and their potential use in retarding the staling process have been studied. The effects of the gums were determined by assessing the pasting qualities of wheat flour slurry, dough properties, and the finished product. After 24 and 96 h of storage, investigations were conducted on the finished product. Micro-doughLab was used to assess dough mixing qualities, and a texture profile analysis (TPA) test was used to assess the texture. A hedonic sensory test of texture, scent, taste, color, and general approval was also conducted. The type of gum used had a significant impact on the physical properties of the bread and cake and their evolution through time. Reduced amylose retrogradation was demonstrated by the lower peak viscosity and substantially lower setback of wheat flour gels, which corresponded to lower gel hardness. Gums were superior at increasing the bread loaf volume, especially GZ, although gums had the opposite effect on cake volume. After both storage periods, the hardness of the bread and cake was much lower than that of the control. Except when 2% GC was used, adding GC and GZ gums to bread and cake invariably increased the overall acceptability of the product. In terms of shelf-life, GZ was able to retain all texture parameters, volume, and general acceptability close to the control after storage.

Effect of Cactus (Opuntia ficus-indica) and Acacia (Acacia seyal) Gums on the Pasting, Thermal, Textural, and Rheological Properties of Corn, Sweet Potato, and Turkish Bean Starches.

This study was planned to explore the locally available natural sources of gum hydrocolloids as a natural modifier of different starch properties. Corn (CS), sweet potato (SPS), and Turkish bean (TBS) starches were mixed with locally extracted native or acetylated cactus (CG) and acacia (AG) gums at 2 and 5% replacement levels. The binary mixtures (starch-gums) were prepared in water, freeze dried, ground to powder, and stored airtight. A rapid viscoanalyzer (RVA), differential scanning calorimeter (DSC), texture analyzer, and dynamic rheometer were used to explore their pasting, thermal, textural, and rheological properties. The presence of acetylated AG or CG increased the final viscosity (FV) in all three starches when compared to starch pastes containing native gums. Plain SPS dispersion had a higher pasting temperature (PT) than CS and TBS. The addition of AG or CG increased the PT of CS, SPS, and TBS. The thermograms revealed the overall enthalpy change of the starch and gum blends: TBS > SPS > CS. The peak temperature (Tp) of starches increased with increasing gum concentration from 2 to 5% for both AG and CG native and modified gums. When compared to the control gels, the addition of 2% CG, either native or modified, reduced the syneresis of starch gels. However, further addition (5% CG) increased the gels' syneresis. Furthermore, the syneresis for the first cycle on the fourth day was higher than the second cycle on the eighth day for all starches. The addition of native and acetylated CG reduced the hardness of starch gels at all concentrations tested. All of the starch dispersions had higher G' than G″ values, indicating that they were more elastic and less viscous with or without the gums. The apparent viscosity of all starch gels decreased as shear was increased, with profiles indicating time-dependent thixotropic behavior. All of the starch gels, with or without gums, showed a non-Newtonian shear thinning trend in the shear stress vs. shear rate graphs. The addition of acetylated CG gum to CS resulted in a higher activation energy (Ea) than the native counterparts and the control. More specifically, starch gels with a higher gum concentration (5%) provided greater Ea than their native counterparts.

Relationship between Dough Properties and Baking Performance of Panned Bread: The Function of Maltodextrins and Natural Gums.

The effectiveness of hydrocolloids (2% maximum in various combinations) from various sources, including maltodextrins (MD) with polymerization degree (DP) 18 and ziziphus gum (ZG), on the dough properties and quality of panned bread, as well as the possibility of using them to delay the bread staling process, have been investigated after 24, 72, and 96 h of storage. By evaluating the pasting capabilities of wheat flour slurry, dough properties, and the final product, the effects of the ziziphus gum (ZG) and maltodextrins (MD) were ascertained. A TA-TXT texture analyzer, a texture profile analysis test, and Micro-doughLab were used to evaluate the dough mixing properties. Additionally, a hedonic sensory evaluation of the overall acceptance of the bread, as well as its texture, aroma, taste, and color, was done. It is clear that MD had a more distinct impact than ZG on the way dough was mixed, the texture of the gel, and the finished product. The combination of MD and ZG significantly altered the bread's physical characteristics and its aging over time. The decreased peak viscosity and noticeably smaller setback of wheat flour gels, which corresponded to lower gel hardness, serve as evidence of reduced amylose retrogradation. At 2%, MD outperformed ZG in terms of increasing water absorption, dough stability, and bread loaf volume. With the exception of the blend that included three times as much MD as ZG, all mixes, including the control, exhibited an increase in bread firmness as a function of time after storage. Overall, the panelists liked (score of 5 and above) the bread made with mixes that had either MD or ZG, or a combination of both.

Food packaging's materials: A food safety perspective.

Food packaging serves purposes of food product safety and easy handling and transport by preventing chemical contamination and enhancing shelf life, which provides convenience for consumers. Various types of materials, including plastics, glass, metals, and papers and their composites, have been used for food packaging. However, owing to consumers' increased health awareness, the significance of transferring harmful materials from packaging materials into foods is of greater concern. This review highlights the interactions of food with packaging materials and elaborates the mechanism, types, and contributing factors of migration of chemical substances from the packaging to foods. Also, various types of chemical migrants from different packaging materials with their possible impacts on food safety and human health are discussed. We conclude with a future outlook based on legislative considerations and ongoing technical contributions to optimization of food-package interactions.

Use of Gum Cordia (Cordia myxa) as a Natural Starch Modifier; Effect on Pasting, Thermal, Textural, and Rheological Properties of Corn Starch.

Incorporation of hydrocolloid gums in native starches help to improve their pasting, thermal, rheological and textural properties along with improvement in the stability of starch gels. The use of Cordia gum is not widely studied as a starch modifier and this fact could make this study more interesting and unique. This study investigated the effects of the non-conventional hydrocolloid gum (Cordia gum) on corn starch properties. Corn starch and gum Cordia (GC) blends were prepared at different replacement levels (0%, 3%, 6%, 9%, and 12%). The effect of GC levels on pasting, thermal, rheological, and textural properties were evaluated using rapid viscoanalyzer, differential scanning colorimeter, rheometer, and texture analyzer. The presence of GC significantly increased starch gelatinization temperatures, enthalpies, peak viscosities, final viscosities, and setback viscosities. GC improved freeze thaw stability in starch. The shear rate (1/s) versus shear stress (σ) data of all samples fitted well to the simple power law model (R2 = 0.97-0.99). The control had the lowest flow behavior index (n; 0.17), which increased to (0.36-0.56) with increasing GC levels. The consistency index (K) of the starch-gum blends increased with increasing GC levels. The dominance of elastic properties over viscous properties was demonstrated by G' > G″. The magnitudes of G' and G″ increased with increasing GC concentration. The outcomes could help to use this modification method as an alternative to chemical and enzymatic modification with respect to cost, safety, less time consumption and less requirement of process modifications.

Effect of Different Starches on the Rheological, Sensory and Storage Attributes of Non-fat Set Yogurt.

This study was conducted to investigate the effect of various native starches on the rheological and textural properties of non-fat set yogurt. The yogurt samples were prepared while using five types of starches (potato, sweet potato, corn, chickpea, and Turkish beans). The physical properties of the prepared yogurt were analyzed while using shear viscosity, viscoelasticity, and texture analysis. The tests were performed after 0, 7, and 15 days storage. The effect of these starches on the yogurt viscoelastic properties, texture, syneresis, and sensory evaluation were determined under optimum conditions. The results showed that adding 1% starch could significantly (p < 0.05) reduce syneresis and improve yogurt firmness. Starches exhibited different effect on the overall quality of the yogurt due to their origin and amylose content. Regardless of the number of storage period duration, all of the samples, including the control behaved as pseudoplastic materials (n < 1) with various levels of pseudoplasticity. Yogurts with corn and tuber starches had the highest consistency coefficient (k), which indicated higher viscosity. The yogurt sample with chickpea starch exhibited the highest G´, making the gel more solid like. Therefore, the influence of tuber starches (potato and sweet potato) on G´ was different when compared to corn or legume starches. The behavior of the starches changed with storage time, where some starches performed better only at the beginning of the storage period duration. Wheying-off was significantly reduced, regardless of starch type. The pH of the yogurt remained unchanged through storage. Sensory evaluation showed a preference for starch-containing samples as compared to the control, regardless of the starch type. The variation in yogurt quality as a function of starch type could be attributed to the starch granule structure, gelatinization mechanism, or amylose content.

Effect of Hydrocolloid Gums on the Pasting, Thermal, Rheological and Textural Properties of Chickpea Starch.

The study was planned to evaluate the effect of non-commercial gums as compared to commercial gums. The concentration dependent effect of two commercial (arabic, xanthan) and four non-commercial (cress seed, fenugreek, flaxseed, okra) polysaccharide gums on the pasting, rheological, textural and thermal properties of chickpea were investigated by rapid visco analyzer (RVA), hybrid rheometer, texture analyzer and differential scanning calorimetry (DSC). Blends were prepared by replacing chickpea starch at 0.5% and 2.0% with gums, whereas native chickpea starch was used as a control. RVA data showed that peak and final viscosities were dramatically increased with xanthan contrary to reduction with gum arabic, flaxseed and okra gums. Hybrid rheometer displayed that storage and loss moduli were increased as a function of angular frequency and dominance of elastic properties over viscous ones. Xanthan blend was less temperature dependent due to dramatic decrease in activation energy value as compared to control while other gums were more temperature dependent. The magnitude of this effect was reliant on the type and concentration of gum. After storage for 21 days at -20 °C, total syneresis was reduced with the incorporation of xanthan and cress seed and also with high levels of gum arabic, flaxseed and fenugreek gums. The gel hardness was increased after overnight storage at ambient temperature (23 °C) with fenugreek while reduction in hardness was observed with xanthan, flaxseed and okra gums. The presence of gums resulted in significantly higher onset and peak temperatures determined through differential scanning calorimetry.