Klebsiella pneumoniae exhibiting a phenotypic hyper-splitting phenomenon including the formation of small colony variants.

In this study, we characterized a Klebsiella pneumoniae strain in a patient with shrapnel hip injury, which resulted in multiple phenotypic changes, including the formation of a small colony variant (SCV) phenotype. Although already described since the 1960s, there is little knowledge about SCV phenotypes in Enterobacteriaceae. The formation of SCVs has been recognized as a bacterial strategy to evade host immune responses and compromise the efficacy of antimicrobial therapies, leading to persistent and recurrent courses of infections. In this case, 14 isolates with different resisto- and morpho-types were distinguished from the patient's urine and tissue samples. Whole genome sequencing revealed that all isolates were clonally identical belonging to the K. pneumoniae high-risk sequence type 147. Subculturing the SCV colonies consistently resulted in the reappearance of the initial SCV phenotype and three stable normal-sized phenotypes with distinct morphological characteristics. Additionally, an increase in resistance was observed over time in isolates that shared the same colony appearance. Our findings highlight the complexity of bacterial behavior by revealing a case of phenotypic "hyper-splitting" in a K. pneumoniae SCV and its potential clinical significance.

Case Report: Hip arthroplasty after fracture-related joint infection caused by extensively drug-resistant Klebsiella pneumoniae.

This case-report focuses on a 23-year-old soldier suffering from a fracture-related hip joint infection (FRI) due to extensively drug-resistant Klebsiella pneumoniae and S. epidermidis. The patient underwent multiple septic revision surgeries including the removal of remaining shrapnel accompanied by last-resort antimicrobial therapy with cefiderocol and colistin. Additionally, the surgeries included repeated tissue sampling for microbiological and histopathological analysis. An antibiotic-loaded cemented filler containing cefiderocol was used to improve local antimicrobial therapy. The biopsies prior to and during hip replacement surgery confirmed successful microbe eradication. Hip arthroplasty restored hip joint function and significantly improved patient's quality of life. The utilization of a trabecular metal shell and a meta-diaphyseally anchored cementless hip stem ensured secure implant fixation and early patient mobilisation. An adjusted biofilm active oral antimicrobial therapy after arthroplasty intervention was continued to prevent early periprosthetic joint infection. This case emphasizes the difficulties of managing FRI and multidrug-resistant pathogens. It contributes valuable insight into navigating complex orthopedic cases while ensuring successful hip arthroplasty outcomes. In conclusion, early interdisciplinary collaboration, appropriate antimicrobial therapy along with tailored surgical interventions are crucial for managing such complex cases successfully.

Evaluation of an Automated System for the Counting of Microbial Colonies.

Counting of microbial colonies is a common technique employed in research and diagnostics. To simplify this tedious and time-consuming process, automated systems have been proposed. This study aimed to elucidate the reliability of automated colony counting. We evaluated a commercially available instrument (UVP ColonyDoc-It Imaging Station) in regard to its accuracy and potential time savings. Suspensions of Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, Klebsiella pneumoniae, Enterococcus faecium, and Candida albicans (n = 20 each) were adjusted to achieve growth of approximately 1,000, 100, 10, and 1 colony per plate, respectively, after overnight incubation on different solid media. Compared with manual counting, each plate was automatically counted by the UVP ColonyDoc-It with and without visual adjustment on a computer display. For all bacterial species and concentrations automatically counted without visual correction, an overall mean difference from manual counts of 59.7%, a proportion of isolates with overestimation/underestimation of colony numbers of 29%/45%, respectively, and only a moderate relationship (R2 = 0.77) with the manual counting were shown. Applying visual correction, the overall mean difference from manual counts was 1.8%, the proportion of isolates with overestimation/underestimation of colony numbers amounted to 2%/42%, respectively, and a strong relationship (R2 = 0.99) with the manual counting was observed. The mean time needed for manual counting compared with automated counting without and with visual correction was 70 s, 30 s, and 104 s, respectively, for bacterial colonies through all concentrations tested. Generally, similar performance regarding accuracy and counting time was observed with C. albicans. In conclusion, fully automatic counting showed low accuracy, especially for plates with very high or very low colony numbers. After visual correction of the automatically generated results, the concordance with manual counts was high; however, there was no advantage in reading time. IMPORTANCE Colony counting is a widely utilized technique in the field of microbiology. The accuracy and convenience of automated colony counters are essential for research and diagnostics. However, there is only sparse evidence on performance and usefulness of such instruments. This study examined the current state of reliability and practicality of the automated colony counting with an advanced modern system. For this, we thoroughly evaluated a commercially available instrument in terms of its accuracy and counting time required. Our findings indicate that fully automatic counting resulted in low accuracy, particularly for plates with very high or very low colony numbers. Visual correction of the automated results on a computer screen improved concordance with manual counts, but there was no benefit in counting time.

Evaluation of a Novel Benchtop Tool for Acceleration of Sample Preparation for MALDI-TOF Mass Spectrometry.

During the past decade, MALDI-TOF mass spectrometry (MS) has become a standard method for identification of bacteria and yeasts. Nonetheless, further optimization of the identification process is important to streamline workflows and save resources. This study evaluated the application of a multipurpose benchtop tool, MBT FAST Shuttle IVD, for accelerated drying of liquid assay components (matrix, formic acid, and/or sample) on a MALDI target. A total of 50 bacterial and fungal isolates were subjected to three different sample preparation procedures prior to the identification by MALDI-TOF MS: direct transfer (DT), extended direct transfer (eDT), and protein extraction (PE). Compared to conventional drying at room temperature, the preparation was performed with standardized heating of the MALDI target on the MBT FAST Shuttle. During DT, eDT, and PE, 56.7% (P < 0.001), 56.8% (P < 0.001), and 52.8% (P < 0.001) of time for matrix drying were saved by using the MBT FAST Shuttle, respectively. Applying the MBT FAST Shuttle, 57.5% (P < 0.001) of time for drying of formic acid were saved for eDT and 57.5% (P < 0.001) of time for sample drying were saved for PE. A significant improvement of the identification rates and scores was observed with MBT FAST Shuttle for eDT (P = 0.001) and PE (P = 0.008) methods, while the effect on identification quality for DT was not statistically significant (P = 0.16). In conclusion, the use of the MBT FAST Shuttle shortened the drying time of assay components by about a half for all preparation methods. Moreover, positive effect on identification success was observed.

Advanced Skin Antisepsis: Application of UVA-Cleavable Hydroxyethyl Starch Nanocapsules for Improved Eradication of Hair Follicle-Associated Microorganisms.

Hair follicles constitute important drug delivery targets for skin antisepsis since they contain ≈25% of the skin microbiome. Nanoparticles are known to penetrate deeply into hair follicles. By massaging the skin, the follicular penetration process is enhanced based on a ratchet effect. Subsequently, an intrafollicular drug release can be initiated by various trigger mechanisms. Here, we present novel ultraviolet A (UVA)-responsive nanocapsules (NCs) with a size between 400 and 600 nm containing hydroxyethyl starch (HES) functionalized by an o-nitrobenzyl linker. A phase transfer into phosphate-buffered saline (PBS) and ethanol was carried out, during which an aggregation of the particles was observed by means of dynamic light scattering (DLS). The highest stabilization for the target medium ethanol as well as UVA-dependent release of ethanol from the HES-NCs was achieved by adding 0.1% betaine monohydrate. Furthermore, sufficient cytocompatibility of the HES-NCs was demonstrated. On ex vivo porcine ear skin, a strong UVA-induced release of the model drug sulforhodamine 101 (SR101) could be demonstrated after application of the NCs in cyclohexane using laser scanning microscopy. In a final experiment, a microbial reduction comparable to that of an ethanol control was demonstrated on ex vivo porcine ear skin using a novel UVA-LED lamp for triggering the release of ethanol from HES-NCs. Our study provides first indications that an advanced skin antisepsis based on the eradication of intrafollicular microorganisms could be achieved by the topical application of UVA-responsive NCs.

Genomic analysis of the international high-risk clonal lineage Klebsiella pneumoniae sequence type 395.

BACKGROUND: Klebsiella pneumoniae, which is frequently associated with hospital- and community-acquired infections, contains multidrug-resistant (MDR), hypervirulent (hv), non-MDR/non-hv as well as convergent representatives. It is known that mostly international high-risk clonal lineages including sequence types (ST) 11, 147, 258, and 307 drive their global spread. ST395, which was first reported in the context of a carbapenemase-associated outbreak in France in 2010, is a less well-characterized, yet emerging clonal lineage. METHODS: We computationally analyzed a large collection of K. pneumoniae ST395 genomes (n = 297) both sequenced in this study and reported previously. By applying multiple bioinformatics tools, we investigated the core-genome phylogeny and evolution of ST395 as well as distribution of accessory genome elements associated with antibiotic resistance and virulence features. RESULTS: Clustering of the core-SNP alignment revealed four major clades with eight smaller subclades. The subclades likely evolved through large chromosomal recombination, which involved different K. pneumoniae donors and affected, inter alia, capsule and lipopolysaccharide antigen biosynthesis regions. Most genomes contained acquired resistance genes to extended-spectrum cephalosporins, carbapenems, and other antibiotic classes carried by multiple plasmid types, and many were positive for hypervirulence markers, including the siderophore aerobactin. The detection of "hybrid" resistance and virulence plasmids suggests the occurrence of the convergent ST395 pathotype. CONCLUSIONS: To the best of our knowledge, this is the first study that investigated a large international collection of K. pneumoniae ST395 genomes and elucidated phylogenetics and detailed genomic characteristics of this emerging high-risk clonal lineage.

Bactericidal Activity of Sodium Bituminosulfonate against Staphylococcus aureus.

Antibiotic resistance is increasing worldwide making it necessary to search for alternative antimicrobials. Sodium bituminosulfonate is a long-known substance, whose antimicrobial inhibitory activity has recently been re-evaluated. However, to the best of our knowledge, the bactericidal mode of action of this substance has not been systematically characterized. The aim of this study was to investigate the in vitro bactericidal activity of sodium bituminosulfonate by determining the minimal bactericidal concentrations (MBC), as well as the rapidity of bactericidal effect by time-kill curves. Clinical isolates of methicillin-susceptible (MSSA, n = 20) and methicillin-resistant (mecA/mecC-MRSA, n = 20) Staphylococcus aureus were used to determine MBC by a broth microdilution method. Sodium bituminosulfonate (Ichthyol® light) was tested in double-dilution concentration steps ranging from 0.03 g/L to 256 g/L. For time-kill analysis, two reference and two clinical S. aureus strains were tested with different concentrations of sodium bituminosulfonate (1× minimal inhibitory concentration (MIC), 2× MIC, 4× MIC, 16× MIC and 256× MIC). For MSSA isolates, MBC50, MBC90 and the MBC range were 0.5 g/L, 1.0 g/L and 0.125-1.0 g/L; (MBC/MIC ratio)50, (MBC/MIC ratio)90 and the range of the MBC/MIC ratio were 4, 4 and 1-8, respectively. Among MRSA isolates, MBC50, MBC90 and the MBC range amounted to 0.5 g/L, 1.0 g/L and 0.06-1.0 g/L; (MBC/MIC ratio)50, (MBC/MIC ratio)90 and the range of the MBC/MIC ratio were 2, 4 and 1-8, respectively. Time-kill kinetics revealed a bactericidal effect after 30 min for sodium bituminosulfonate concentrations of 16× MIC and 256× MIC. The bactericidal activity against MSSA and MRSA was demonstrated for sodium bituminosulfonate. The killing was very rapid with the initial population reduced by 99.9% after only short incubation with concentrations of 16× MIC and higher.

Susceptibility of Burkholderia cepacia Complex to Ceftazidime/Avibactam and Standard Drugs of Treatment for Cystic Fibrosis Patients.

Burkholderia cepacia complex (Bcc) in airways of patients with cystic fibrosis (CF) is associated with an increased morbidity and mortality. A huge range of intrinsic antimicrobial resistances challenges the treatment of Bcc infections. The aim was to assess the susceptibility of Bcc to ceftazidime/avibactam and standard drugs for the treatment for CF patients and to determine the respective genomic determinants of resistance. Bcc isolates (n = 64) from a prospective multicenter study of CF airway pathogens (2004-2020, Germany) were subjected to broth microdilution and minimal inhibitory concentrations were interpreted with European Committee on Antimicrobial Susceptibility Testing and Clinical & Laboratory Standards Institute breakpoints. A synergism between aztreonam and avibactam was tested using ceftazidime/avibactam disks with or without aztreonam. Plasmids and chromosomes of all isolates were screened for antimicrobial resistance genes. The highest susceptibility rate was detected for trimethoprim/sulfamethoxazole (83%), followed by ceftazidime/avibactam (78%), ceftazidime (53%), levofloxacin (39%) and meropenem (27%). The median inhibition zone diameters of ceftazidime-avibactam and ceftazidime/avibactam plus aztreonam were equal. This was in line with the absence of known class B metallo-ß-lactamases in any of the isolates. The majority of isolates carried blapenA (98%) and blaampC (86%). Trimethoprim/sulfamethoxazole and ceftazidime/avibactam showed high susceptibility rates. Aztreonam in combination with ceftazidime/avibactam had no synergistic effect in our Bcc isolates.

Extensively Drug-Resistant Klebsiella pneumoniae Counteracts Fitness and Virulence Costs That Accompanied Ceftazidime-Avibactam Resistance Acquisition.

The ability of extensively drug-resistant (XDR) Klebsiella pneumoniae to rapidly acquire resistance to novel antibiotics is a global concern. Moreover, Klebsiella clonal lineages that successfully combine resistance and hypervirulence have increasingly occurred during the last years. However, the underlying mechanisms of counteracting fitness costs that accompany antibiotic resistance acquisition remain largely unexplored. Here, we investigated whether and how an XDR sequence type (ST)307 K. pneumoniae strain developed resistance against the novel drug combination ceftazidime-avibactam (CAZ-AVI) using experimental evolution. In addition, we performed in vitro and in vivo assays, molecular modeling, and bioinformatics to identify resistance-conferring processes and explore the resulting decrease in fitness and virulence. The subsequent amelioration of the initial costs was also addressed. We demonstrate that distinct mutations of the major nonselective porin OmpK36 caused CAZ-AVI resistance that persists even upon following a second experimental evolution without antibiotic selection pressure and that the Klebsiella strain compensates the resulting fitness and virulence costs. Furthermore, the genomic and transcriptomic analyses suggest the envelope stress response regulator rpoE and associated RpoE-regulated genes as drivers of this compensation. This study verifies the crucial role of OmpK36 in CAZ-AVI resistance and shows the rapid adaptation of a bacterial pathogen to compensate fitness- and virulence-associated resistance costs, which possibly contributes to the emergence of successful clonal lineages. IMPORTANCE Extensively drug-resistant Klebsiella pneumoniae causing major outbreaks and severe infections has become a significant challenge for health care systems worldwide. Rapid resistance development against last-resort therapeutics like ceftazidime-avibactam is a significant driver for the accelerated emergence of such pathogens. Therefore, it is crucial to understand what exactly mediates rapid resistance acquisition and how bacterial pathogens counteract accompanying fitness and virulence costs. By combining bioinformatics with in vitro and in vivo phenotypic approaches, this study revealed the critical role of mutations in a particular porin channel in ceftazidime-avibactam resistance development and a major metabolic regulator for ameliorating fitness and virulence costs. These results highlight underlying mechanisms and contribute to the understanding of factors important for the emergence of successful bacterial pathogens.

Exploration of Bacterial Re-Growth as In Vitro Phenomenon Affecting Methods for Analysis of the Antimicrobial Activity of Chimeric Bacteriophage Endolysins.

Drug alternatives to combat methicillin-resistant Staphylococcus aureus (MRSA) in human and animal healthcare are urgently needed. Recently, the recombinant bacteriophage endolysins, PRF-119 and its successor substance HY-133, have proven to be highly active against various S. aureus clonal lineages and to exhibit a very rapid bactericidal effect when standard methods for susceptibility testing are applied. Along with subsequent growth curve experiments, a re-growth phenomenon was observed in vitro necessitating its clarification for the assessment of the agent's stability and activity as well as for methodological aspects of endolysin testing in general. Distinct in vitro parameters were comparatively examined applying also scanning electron microscopy, fluorescence assays and SDS-PAGE analysis. The shape and material of the culture vessels as well as the shaking conditions were identified as factors influencing the in vitro stability and activity of HY-133. The highest function maintenance was observed in plain centrifuge tubes. Based on this, the conditions and parameters of assays for testing the antimicrobial activities of phage endolysins were determined and adjusted. In particular, shear forces should be kept to a minimum. Our results form the basis for both future test standardization and re-growth-independent experiments as prerequisites for exact determination of the antimicrobial activities of engineered endolysins.

Rapid Simultaneous Testing of Multiple Antibiotics by the MALDI-TOF MS Direct-on-Target Microdroplet Growth Assay.

Accelerating antimicrobial susceptibility testing (AST) is a priority in the development of novel microbiological methods. The MALDI-TOF MS-based direct-on-target microdroplet growth assay (DOT-MGA) has recently been described as a rapid phenotypic AST method. In this proof-of-principle study, we expanded this method to simultaneously test 24 antimicrobials. An Enterobacterales panel was designed and evaluated using 24 clinical isolates. Either one or two (only for antimicrobials with the EUCAST "I" category) breakpoint concentrations were tested. Microdroplets containing bacterial suspensions with antimicrobials and growth controls were incubated directly on the spots of a disposable MALDI target inside a humidity chamber for 6, 8 or 18 h. Broth microdilution was used as the standard method. After 6 and 8 h of incubation, the testing was valid (i.e., growth control was successfully detected) for all isolates and the overall categorical agreement was 92.0% and 92.7%, respectively. Although the overall assay performance applying short incubation times is promising, the lower performance with some antimicrobials and when using the standard incubation time of 18 h indicates the need for thorough standardization of assay conditions. While using "homebrew" utensils and provisional evaluation algorithms here, technical solutions such as dedicated incubation chambers, tools for broth removal and improved software analyses are needed.

MALDI-TOF Mass Spectrometry-Based Optochin Susceptibility Testing for Differentiation of Streptococcus pneumoniae from other Streptococcus mitis Group Streptococci.

Discrimination of Streptococcus pneumoniae from other Streptococcus mitis group (SMG) species is still challenging but very important due to their different pathogenic potential. In this study, we aimed to develop a matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS)-based optochin susceptibility test with an objective read-out. Optimal test performance was established and evaluated by testing consecutively collected respiratory isolates. Optochin in different concentrations as a potential breakpoint concentration was added to a standardized inoculum. Droplets of 6 µL with optochin and, as growth control, without optochin were spotted onto a MALDI target. Targets were incubated in a humidity chamber, followed by medium removal and on-target protein extraction with formic acid before adding matrix with an internal standard. Spectra were acquired, and results were interpreted as S. pneumoniae in the case of optochin susceptibility (no growth), or as non-S. pneumoniae in the case of optochin non-susceptibility (growth). Highest test accuracy was achieved after 20 h incubation time (95.7%). Rapid testing after 12 h incubation time (optochin breakpoint 2 µg/mL; correct classification 100%, validity 62.5%) requires improvement by optimization of assay conditions. The feasibility of the MALDI-TOF MS-based optochin susceptibility test was demonstrated in this proof-of-principle study; however, confirmation and further improvements are warranted.

Hypervirulent Klebsiella pneumoniae Sequence Type 420 with a Chromosomally Inserted Virulence Plasmid.

BACKGROUND: Klebsiella pneumoniae causes severe diseases including sepsis, pneumonia and wound infections and is differentiated into hypervirulent (hvKp) and classic (cKp) pathotypes. hvKp isolates are characterized clinically by invasive and multiple site infection and phenotypically in particular through hypermucoviscosity and increased siderophore production, enabled by the presence of the respective virulence genes, which are partly carried on plasmids. METHODS: Here, we analyzed two K. pneumoniae isolates of a human patient that caused severe multiple site infection. By applying both genomic and phenotypic experiments and combining basic science with clinical approaches, we aimed at characterizing the clinical background as well as the two isolates in-depth. This also included bioinformatics analysis of a chromosomal virulence plasmid integration event. RESULTS: Our genomic analysis revealed that the two isolates were clonal and belonged to sequence type 420, which is not only the first description of this K. pneumoniae subtype in Germany but also suggests belonging to the hvKp pathotype. The latter was supported by the clinical appearance and our phenotypic findings revealing increased siderophore production and hypermucoviscosity similar to an archetypical, hypervirulent K. pneumoniae strain. In addition, our in-depth bioinformatics analysis suggested the insertion of a hypervirulence plasmid in the bacterial chromosome, mediated by a new IS5 family sub-group IS903 insertion sequence designated ISKpn74. CONCLUSION: Our study contributes not only to the understanding of hvKp and the association between hypervirulence and clinical outcomes but reveals the chromosomal integration of a virulence plasmid, which might lead to tremendous public health implications.

Phenotypic Variants of Bacterial Colonies in Microbiological Diagnostics: How Often Are They Indicative of Differing Antimicrobial Susceptibility Patterns?

Phenotypic variants (PV) are colonies of the same species in the same specimen with different morphological features. It is controversial whether antimicrobial susceptibility testing (AST) should be done for all PV. The objectives of this study were to quantify the proportion of differing antimicrobial susceptibility patterns (dASP) among PV and to identify species and antimicrobial compounds that are mostly affected. All PV from routine diagnostics (University Hospital Münster, Germany; 1 September 2019 to 31 August 2020) were subjected to species identification (matrix-assisted laser desorption ionization-time of flight mass spectrometry [MALDI-TOF MS]) and AST (Vitek 2). To assess the dASP, only antimicrobial agents were considered for which Vitek-derived MIC were available (interpreted according to the EUCAST clinical breakpoints). The categorical agreement (CA; agreement with the AST categories S [susceptible, standard dosing regimen], I [susceptible, increased exposure], R [resistant]) of the PV was calculated. The PV of Escherichia coli (n = 260), Pseudomonas aeruginosa (n = 86), Klebsiella pneumoniae (n = 47), Enterobacter cloacae complex (n = 45), and Staphylococcus aureus (n = 38) were included. The median CA was 95% (range, 80 to 100%, depending on the species). The colony characteristics (e.g., form/size, color, margin, hemolysis) were not indicative for dASP. PV showed a high categorical agreement in the AST categories. This observation supports a test strategy to perform AST for only one colony of PV. IMPORTANCE Phenotypic variants of bacteria are frequent in routine diagnostics and can display differing antimicrobial susceptibility patterns. We found that the likelihood of different antimicrobial susceptibility is low among PV. To save laboratory resources, only one isolate per PV could be tested to guide the antimicrobial treatment of patients.

Matrix-Assisted Laser Desorption Ionization-Time of Flight Mass Spectrometry for Antimicrobial Susceptibility Testing.

The advent of matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) in clinical microbiology has dramatically improved the accuracy and speed of diagnostics. However, this progress has mainly been limited to the identification of microorganisms, whereas the practical improvement of antimicrobial susceptibility testing (AST) still lags behind. MALDI-TOF MS-based approaches include the detection of selected resistance mechanisms and the universal phenotypic AST. This minireview focuses on the discussion of those MALDI-TOF MS methods that allow universal growth-based phenotypic AST. The method of minimal profile change concentrations (MPCC) is based on detecting proteome modification in the presence of an antimicrobial. Using stable-isotope labeling, characteristic mass shifts in the presence of an antimicrobial indicate the incorporation of the isotopic labels, and thus the viability and resistance of the microorganism. For MALDI Biotyper antibiotic susceptibility test rapid assay (MBT-ASTRA), microorganisms are incubated with or without an antimicrobial, followed by cell lysis, protein extraction, and transfer of the cell lysate onto a MALDI target plate. Using the internal standard, peak intensities are correlated to the amount of microbial proteins, and the relative microbial growth is calculated. Most recent development in the field is the direct-on-target microdroplet growth assay (DOT-MGA). Here, incubation of microorganisms with antimicrobials takes place directly on spots of a MALDI target in the form of microdroplets. After incubation, nutrient medium is removed by dabbing with absorptive material. Resistant microorganisms grow despite the presence of antimicrobial, and their amplified biomass is detected by MALDI-TOF MS. Finally, an outlook is provided for further assay improvements.

Short Incubation of Positive Blood Cultures on Solid Media for Species Identification by MALDI-TOF MS: Which Agar Is the Fastest?

Short incubation of positive blood cultures on solid media is now increasingly applied to speed up species identification by matrix assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS). Although Columbia blood agar (CBA) and chocolate agar (Choc) are widely used, a direct comparison of standard agars is lacking. We therefore compared the time to species identification of blood cultures incubated on CBA, Choc, and MacConkey agar (MAC, for Gram-negative rods). Positive aerobic/anaerobic blood cultures (2 drops = 50 µl) were incubated on CBA, Choc, MAC, and the required time of incubation to low-confidence identification (score of ≥1.7 to <2) and high-confidence identification (score of ≥2) by MALDI-TOF MS was measured. Exclusion criteria were (i) false-positive blood cultures, (ii) mixed cultures with different species, (iii) growth of anaerobes/fungi, and (iv) a total number of isolates of one group (i.e., Gram-positive/-negative cocci/rods) of <30. A total of 187 blood cultures with Gram-positive cocci (n = 124) and Gram-negative rods (n = 63) were included in the final analysis. The shortest median time to high-confidence identification (score of ≥2) was achieved on MAC for Gram-negative rods (2.0 h; range, 1.9 to 4.2 h) and on CBA for Gram-positive cocci (4.0 h; range, 1.9 to 25.0 h). However, the difference from results obtained with Choc was not statistically significant. When only one agar plate is used for short incubation of positive blood cultures, Choc may represent a compromise in terms of time to high-confidence identification by MALDI-TOF MS and the bacterial spectrum that is covered. However, using only Choc is disadvantageous when the shortest incubation times to identification are strived for. IMPORTANCE When blood cultures are flagged as positive, they are incubated on solid media to produce enough biomass of the bacterium for identification and susceptibility testing. Rapid turnaround times for laboratory results could save lives, and we wanted to assess which solid medium is best to shorten the time to species identification using MALDI-TOF mass spectrometry. For that purpose, we used positive blood cultures from routine diagnostics and compared Columbia blood agar (CBA), Chocolate agar (Choc), and MacConkey agar (MAC, for Gram-negative rods). We found that MAC performed best for Gram-negative rods and CBA was quickest for Gram-positive cocci. However, Choc may represent a compromise if fastidious species should be covered.

Antibiotic Resistant Bloodstream Infections in Pediatric Patients Receiving Chemotherapy or Hematopoietic Stem Cell Transplant: Factors Associated with Development of Resistance, Intensive Care Admission and Mortality.

Bloodstream infections (BSI) are a severe complication of antineoplastic chemotherapy or hematopoietic stem cell transplantation (HSCT), especially in the presence of antibiotic resistance (AR). A multinational, multicenter retrospective study in patients aged ≤ 18 years, treated with chemotherapy or HSCT from 2015 to 2017 was implemented to analyze AR among non-common skin commensals BSI. Risk factors associated with AR, intensive care unit (ICU) admission and mortality were analyzed by multilevel mixed effects or standard logistic regressions. A total of 1291 BSIs with 1379 strains were reported in 1031 patients. Among Gram-negatives more than 20% were resistant to ceftazidime, cefepime, piperacillin-tazobactam and ciprofloxacin while 9% was resistant to meropenem. Methicillin-resistance was observed in 17% of S. aureus and vancomycin resistance in 40% of E. faecium. Previous exposure to antibiotics, especially to carbapenems, was significantly associated with resistant Gram-negative BSI while previous colonization with methicillin-resistant S. aureus was associated with BSI due to this pathogen. Hematological malignancies, neutropenia and Gram-negatives resistant to >3 antibiotics were significantly associated with higher risk of ICU admission. Underlying disease in relapse/progression, previous exposure to antibiotics, and need of ICU admission were significantly associated with mortality. Center-level variation showed a greater impact on AR, while patient-level variation had more effect on ICU admission and mortality. Previous exposure to antibiotics or colonization by resistant pathogens can be the cause of AR BSI. Resistant Gram-negatives are significantly associated with ICU admission and mortality, with a significant role for the treating center too. The significant evidence of center-level variations on AR, ICU admission and mortality, stress the need for careful local antibiotic stewardship and infection control programs.

Variability of antibiograms: how often do changes in the antimicrobial susceptibility pattern occur in isolates from one patient?

OBJECTIVES: Many laboratories do not perform antimicrobial susceptibility testing (AST) for all consecutive isolates of the same species from one patient. The objective of this study was to assess how often changes in antimicrobial susceptibility patterns (cASP) occur in such isolates. METHODS: AST was performed for all isolates of defined species obtained from clinical routine (2015-2018) without restrictions for consecutive or sequential isolates of one patient. Occurrence of cASP and time between the first sampling date and first cASP were determined by combining antibiograms from all specimens and after stratification into species and specimens. RESULTS: A total of 35 473 AST results were included (range 2-71 per case). Combining pathogens and specimens, 1991 cASP occurred in 1269/8502 (14.9%) of all cases after a median time until cASP of 5 days (range 0-364). Of these, 628/1991 (31.5%) occurred on the day of first sampling (predominantly due to phenotypic variants in the same specimen). Excluding isolates with differing AST pattern on the first day of sampling, the median time until cASP was 12 days (range 1-364). Stratification into species and specimen revealed a large variance of the median time until cASP (e.g. in Escherichia coli: 5 days; range 1-48 for blood cultures or 16 days; 1-364 for urine). DISCUSSION: Using routine microbiological data in a large tertiary hospital, cASP occurs occasionally. The time to perform subsequent AST to detect cASP depends on the species and type of specimen. Other studies are needed to evaluate whether ideal time intervals applicable beyond local settings can be defined.

Investigation of In-Vitro Adaptation toward Sodium Bituminosulfonate in Staphylococcus aureus.

The global increase in antimicrobial resistance has revived the interest in "old" substances with antimicrobial activity such as sodium bituminosulfonate. However, for those "old" compounds, scientific studies are still sparse and the ones available do not mostly meet the current standards. Since this compound is used for topical applications, investigation of a potential increase in minimal inhibitory concentrations (MICs) is of particular importance. For selection of phenotypes with decreased susceptibility, a collection of 30 genetically diverse methicillin-susceptible (MSSA) and methicillin-resistant Staphylococcus aureus (MRSA) strains were cultured on bi-layered linear gradient agar plates containing sub-inhibitory concentrations of the active agents. The stability of phenotypes with increased MICs was determined by serial passage on agent-free medium. Within 10 passages, only slight and, in most cases, reversible increases in MSSA and MRSA MIC levels toward sodium bituminosulfonate were obtained. Fusidic acid, used as a control, showed exponential expansions in MIC based on mutations in the fusA gene (elongation factor G or EF-G) with no reduction during the recovery phase. The only marginal and largely reversible changes of S. aureus MICs after exposition to sodium bituminosulfonate indicate a low potential for resistance development.

Candida lusitaniae Breakthrough Fungemia in an Immuno-Compromised Adolescent: Case Report and Review of the Literature.

Candida lusitaniae is a rare cause of candidemia that is known for its unique capability to rapidly acquire resistance to amphotericin B. We report the case of an adolescent with grade IV graft-vs.-host disease after hematopoietic cell transplantation who developed catheter-associated C. lusitaniae candidemia while on therapeutic doses of liposomal amphotericin B. We review the epidemiology of C. lusitaniae bloodstream infections in adult and pediatric patients, the development of resistance, and its role in breakthrough candidemia. Appropriate species identification, in vitro susceptibility testing, and source control are pivotal to optimal management of C. lusitaniae candidemia. Initial antifungal therapy may consist of an echinocandin and be guided by in vitro susceptibility and clinical response.