Entomopathogenic fungi in crops protection with an emphasis on bioactive metabolites and biological activities.

Plant pathogens with their abundance are harmful and cause huge damage to different agricultural crops and economy of a country as well as lead towards the shortage of food for humans. For their management, the utilization of entomopathogenic fungi is an eco-friendly technique, sustainable to the environment, safe for humans and has promising effect over chemical-based pesticides. This process requires a biochemical mechanism, including the production of enzymes, toxins, and other metabolites that facilitate host infection and invasion. Essential enzymes such as chitinase, proteinase, and lipase play a direct role in breaking down the host cuticle, the primary barrier to EPF (Entomopathogenic Fungi) infection. Additionally, secondary metabolites such as destruxins in Metarhizium, beauvericin in Beauveria, hirsutellides in Hirsutella, isarolides in Isaria, cordyols in Cordyceps, and vertihemipterins in Verticillium, among others, act both directly and indirectly to disable the defense mechanisms of insect hosts, thereby accelerating the EPF infection process. The chemical composition of these secondary metabolites varies, ranging from simple non-peptide pigments such as oosporine to highly complex piperazine derivatives such as vertihemiptellides. The biocontrol efficacy of EPF is extensively studied, with numerous fungal strains commercially available on a large scale for managing arthropod pests. This review emphasizes the role of proteins and enzymes against crop pathogens, detailing their mode of action, and describing the metabolites from entomopathogenic fungi and their biological activities. In doing so, these findings contribute to establishing a symbiotic equilibrium between agricultural productivity and environmental conservation.

Isolation and characterization of PGPR obtained from different arsenic-contaminated soil samples and their effect on photosynthetic characters of maize grown under arsenic stress.

Contamination of the environment due to speedup of anthropogenic activities has become a serious threat to modern humanity. Among the contaminants, the new emerging concern is the heavy metal (HM) contamination in the environment. Because the persistence and harmfulness of heavy metals affect the ecosystem and the health of plants, animals, and humans, they are the most toxic substances in the environment. Among them, Arsenic (As) emerged as major environmental constraint leading to enormous negative effects on the plant, animal, and human health. Even in minute quantity, As is known to cause various critical diseases in humans and toxicity in plants. Research was performed to observe the capability of plant growth-promoting strains of bacteria in enhancing Zea mays (L.) growth in arsenic polluted soil. Total 30 bacterial strains were isolated from the polluted soils, screened for plant growth promotion potential and arsenic tolerance. Eighteen isolates showed resistance to different levels of sodium arsenate (ranging from 0 to 50 mM) in agar plate using LB media. Of 18 isolates, 83.3% produced IAA, methyl red, and hydrogen cyanide; 55.5% exhibited catalase activity; 61.1% showed siderophore production; 88.8% showed phosphate solubilization; and 44.4% showed oxidase, Voges proskauer activity, and KOH solubility. The most efficient isolates SR3, SD5, and MD3 with significant arsenic tolerance and plant growth-promoting (PGP) activity were examined via sequencing of amplified 16S rRNA gene. Isolates of bacteria, i.e., SR3, SD5, and MD3, showing multiple PGP-traits were identified as Bacillus pumilus (NCBI accession number: OR459628), Paenibacillus faecalis (NCBI accession number: OR461560), and Pseudochrobactrum asaccharolyticum (NCBI accession number: OR458922), respectively. Maize seeds treated with these PGPR strains were grown in pots contaminated with 50 ppm and 100 ppm sodium arsenate. Compared to untreated arsenic stressed plants, bacterial inoculation P. asaccharolyticum (MD3) resulted 20.54%, 18.55%, 33.45%, 45.08%, and 48.55% improvement of photosynthetic pigments (carotenoid content, chlorophyll content, stomatal conductance (gs), substomatal CO2, and photosynthetic rate), respectively. Principal component analysis explained that first two components were more than 96% of the variability for each tested parameter. The results indicate that in comparison to other isolates, P. asaccharolyticum isolate can be used as efficient agent for improving maize growth under arsenic polluted soil.

Unlocking the interaction of organophosphorus pesticide residues with ecosystem: Toxicity and bioremediation.

Organophosphorus adulteration in the environment creates terrestrial and aquatic pollution. It causes acute and subacute toxicity in plants, humans, insects, and animals. Due to the excessive use of organophosphorus pesticides, there is a need to develop environmentally friendly, economical, and bio-based strategies. The microbiomes, that exist in the soil, can reduce the devastating effects of organophosphates. The use of cell-free enzymes and yeast is also an advanced method for the degradation of organophosphates. Plant-friendly bacterial strains, that exist in the soil, can help to degrade these contaminants by oxidation-reduction reactions, enzymatic breakdown, and adsorption. The bacterial strains mostly from the genus Bacillus, Pseudomonas, Acinetobacter, Agrobacterium, and Rhizobium have the ability to hydrolyze the bonds of organophosphate compounds like profenofos, quinalphos, malathion, methyl-parathion, and chlorpyrifos. The native bacterial strains also promote the growth abilities of plants and help in detoxification of organophosphate residues. This bioremediation technique is easy to use, relatively cost-effective, very efficient, and ensures the safety of the environment. This review covers the literature gap by describing the major effects of organophosphates on the ecosystem and their bioremediation by using native bacterial strains.

Alleviation of banded leaf and sheath blight disease incidence in maize by bacterial volatile organic compounds and molecular docking of targeted inhibitors in Rhizoctonia solani.

Rhizoctonia solani (RS) is a pathogenic fungus that affects maize (Zea mays L.) plants and causes banded leaf and sheath blight (BLSB) with severe consequences leading to significant economic losses. Contrarily, rhizobacteria produce numerous volatile organic compounds (VOCs) that help in devising the environment-friendly mechanism for promoting plant growth and stress alleviation without having physical contact with plants. In the present study, 15 rhizobacterial strains were tested for their antagonism against RS. The antagonistic potential of VOCs of the tested plant growth-promoting rhizobacteria (PGPR) strains ranged from 50% to 80% as compared to the control (without PGPR). Among these 15 strains, the maximum (80%) antagonistic activity was exhibited by Pseudomonas pseudoalcaligenes SRM-16. Thus, the potential of VOCs produced by P. pseudoalcaligenes SRM-16 to alleviate the BLSB disease in maize was evaluated. A pot experiment was conducted under greenhouse conditions to observe the effect of VOCs on disease resistance of BLSB-infected seedlings. Overall, maize seedlings exposed to VOCs showed a significant increase in disease resistance as indicated by a reduced disease score than that of unexposed infected plants. The VOCs-exposed maize exhibited lower (11.6%) disease incidence compared to the non-inoculated maize (14.1%). Moreover, plants exposed to VOCs displayed visible improvements in biomass, photosynthetic pigments, osmoregulation, and plant antioxidant and defense enzyme activities compared to the healthy but unexposed seedlings. Simultaneous application of RS and VOCs enhanced superoxide dismutase (SOD), peroxidase (POD), catalase (CAT), phenylalanine ammonia lyase (PAL), ascorbate peroxidase (APX), and polyphenol oxidase (PPO) activities by 96.7%, 266.6%, 313.7%, 246.6%, 307%, and 149.7%, respectively, in the roots and by 81.6%, 246.4%, 269.5%, 269.6%, 329%, and 137.6%, respectively, in the shoots, relative to those of the control plants. The binding affinity of the VOCs (2-pentylfuran, 2,3-butanediol, and dimethyl disulfide) with CRZ1 and S9 protein receptors of RS was assessed by deploying in silico methods. Overall, 2-pentylfuran exhibited a binding affinity with both the selected receptors of RS, while 2,3-butanediol and dimethyl disulfide were able to bind S9 protein only. Hence, it can be deduced that S9 protein receptors are more likely the target RS receptors of bacterial VOCs to inhibit the proliferation of RS.

Innovative production of value-added products using agro-industrial wastes via solid-state fermentation.

The prevalence of organic solid waste worldwide has turned into a problem that requires comprehensive treatment on all fronts. The amount of agricultural waste generated by agro-based industries has more than triplet. It not only pollutes the environment but also wastes a lot of beneficial biomass resources. These wastes may be utilized as a different option/source for the manufacturing of many goods, including biogas, biofertilizers, biofuel, mushrooms and tempeh as the primary ingredients in numerous industries. Utilizing agro-industrial wastes as good raw materials may provide cost reduction and lower environmental pollution levels. Agro-industrial wastes are converted into biofuels, enzymes, vitamin supplements, antioxidants, livestock feed, antibiotics, biofertilizers and other compounds via solid-state fermentation (SSF). By definition, SSF is a method used when there is little to no free water available. As a result, it permits the use of solid materials as biotransformation substrates. Through SSF methods, a variety of microorganisms are employed to produce these worthwhile things. SSFs are therefore reviewed and discussed along with their impact on the production of value-added items. This review will provide thorough essential details information on recycling and the use of agricultural waste.

Toxicity assessment of microplastic (MPs); a threat to the ecosystem.

Plastic is now considered part and parcel of daily life due to its extensive usage. Microplastic (MP) pollution is becoming a growing worry and has been ranked as the second most critical scientific problem in the realm of ecology and the environment. Microplastics are smaller in size than the plastic and are more harmful to biotic and as well as abiotic environments. The toxicity of microplastic depends upon its shape and size and increases with an increase in its adsorption capacity and their toxicity. The reason behind their harmful nature is their small size and their large surface area-to-volume ratio. Microplastic can get inside fruits, vegetables, seeds, roots, culms, and leaves. Hence microplastic enters into the food chain. There are different entry points for microplastic to enter into the food chain. Such sources can include polluted food, beverages, spices, plastic toys, and household (packing, cooking, etc.). The concentration of microplastic in terrestrial environments is increasing day by day. Microplastic causes the destruction of soil structure; destroys soil microbiota, cause depletion of nutrients in the soil, and their absorption by plants decreases plant growth. Apart from other environmental problems caused by microplastic, human health is also badly affected by microplastic pollution present in the terrestrial environment. The presence of microplastics in the human body has been confirmed. Microplastic enters into the body of humans in different possible ways. According to their way of entering the body, microplastics cause different diseases in humans. MPs also cause negative effects on the human endocrine system. At the ecosystem level, the impacts of microplastic are interconnected and can disrupt ecological processes. Although recently different papers have been published on several aspects of the microplastic present in the terrestrial environment but there is no complete overview that focus on the interrelationship of MPs in plants, and soil and their effect on higher animals like a human. This review provides a completely detailed overview of existing knowledge about sources, occurrences, transport, and effects of microplastic on the food chain and soil quality and their ecotoxicological effects on plants and humans.

Interactive effects of Pseudomonas putida and salicylic acid for mitigating drought tolerance in canola (Brassica napus L.).

This research was designed to analyze the interactive effects of Pseudomonas putida and salicylic acid on the growth of canola in stress and non-stress conditions. Salicylic acid is a phenolic derivative, that has a direct involvement in various plant stages like growth, and inflorescence. While Pseudomonas putida is a drought-tolerant strain having plant growth-promoting characteristics like phosphate solubilization, indole acetic acid, and catalase production. Combined application of Pseudomonas putida and salicylic acid has the ability to develop stress tolerance in plants and also improve growth of plants. They have significant (p < 0.05) effects on germination and morphological, physiological, and biochemical parameters. The plants that received the co-application of Pseudomonas putida and salicylic acid gave more significant results than their alone application. They showed enhanced germination percentage, germination index, promptness index and, seedling vigor index by 19%, 18%, 34% and, 27%, respectively. There was a substantial increase of 25%, 27%, and 39% in shoot length, root length, and leaf area, respectively. The synergistic effect of both treatments has caused a 14% and 12% increase in the Canola plants' relative water content and membrane stability index respectively. A substantial increase of 18% in proline content was observed by the inoculation of Pseudomonas putida, whereas proline content was increased by 28% by the exogenous application of salicylic acid. The content of flavonoids (39%) and phenol (40%) was significantly increased by the co-application. The increase in superoxide dismutase (46%), ascorbate peroxidase (43%), and glutathione (19%) were also significant. The present research demonstrated that the combined application of Pseudomonas putida and salicylic acid induces drought tolerance in canola and significantly improves its growth.

Development of novel kinetic model based on microbiome and biochar for in-situ remediation of total petroleum hydrocarbons (TPHs) contaminated soil.

A novel kinetic model has been developed to explain the degradation of total petroleum hydrocarbons. Microbiome engineered biochar amendment may result in a synergistic impact on degradation of total petroleum hydrocarbons (TPHs). Therefore, the present study analyzed the potential of hydrocarbon-degrading bacteria A designated as Aeromonas hydrophila YL17 and B as Shewanella putrefaciens Pdp11 morphological characterized as rod shaped, anaerobic and gram-negative immobilized on biochar, and the degradation efficiency was measured by gravimetric analysis and gas chromatography-mass spectrometry (GC-MS). Whole genome sequencing of both strains revealed the existence of genes responsible for hydrocarbon degradation. In 60 days remediation setup, the treatment consisting of immobilization of both strains on biochar proved more efficient with less half-life and better biodegradation potentials compared to biochar without strains for decreasing the content of TPHs and n-alkanes (C12-C18). Enzymatic content and microbiological respiration showed that biochar acted as a soil fertilizer and carbon reservoir and enhanced microbial activities. The removal efficiency of hydrocarbons was found to be a maximum of 67% in soil samples treated with biochar immobilized with both strains (A + B), followed by biochar immobilized with strain B 34%, biochar immobilized with strain A 29% and with biochar 24%, respectively. A 39%, 36%, and 41% increase was observed in fluorescein diacetate (FDA) hydrolysis, polyphenol oxidase and dehydrogenase activities in immobilized biochar with both strains as compared to control and individual treatment of biochar and strains. An increase of 35% was observed in the respiration rate with the immobilization of both strains on biochar. While a maximum colony forming unit (CFU/g) was found 9.25 with immobilization of both strains on biochar at 40 days of remediation. The degradation efficiency was due to synergistic effect of both biochar and bacteria based amendment on the soil enzymatic activity and microbial respiration.

Evaluation of Selenium Nanoparticles in Inducing Disease Resistance against Spot Blotch Disease and Promoting Growth in Wheat under Biotic Stress.

In the present study, SeNPs were synthesized using Melia azedarach leaf extracts and investigated for growth promotion in wheat under the biotic stress of spot blotch disease. The phytosynthesized SeNPs were characterized using UV-visible spectroscopy, scanning electron microscopy (SEM), energy-dispersive X-ray (EDX), and Fourier-transformed infrared spectroscopy (FTIR). The in vitro efficacy of different concentrations of phytosynthesized SeNPs (i.e., 100 µg/mL, 150 µg/mL, 200 µg/mL, 250 µg/mL, and 300 µg/mL) was evaluated using the well diffusion method, which reported that 300 µg/mL showed maximum fungus growth inhibition. For in vivo study, different concentrations (10, 20, 30, and 40 mg/L) of SeNPs were applied exogenously to evaluate the morphological, physiological, and biochemical parameters under control conditions and determine when infection was induced. Among all treatments, 30 mg/L of SeNPs performed well and increased the plant height by 2.34% compared to the control and 30.7% more than fungus-inoculated wheat. Similarly, fresh plant weight and dry weight increased by 17.35% and 13.43% over the control and 20.34% and 52.48% over the fungus-treated wheat, respectively. In leaf surface area and root length, our findings were 50.11% and 10.37% higher than the control and 40% and 71% higher than diseased wheat, respectively. Plant physiological parameters i.e., chlorophyll a, chlorophyll b, and total chlorophyll content, were increased 14, 133, and 16.1 times over the control and 157, 253, and 42 times over the pathogen-inoculated wheat, respectively. Our findings regarding carotenoid content, relative water content, and the membrane stability index were 29-, 49-, and 81-fold higher than the control and 187-, 63-, and 48-fold higher than the negative control, respectively. In the case of plant biochemical parameters, proline, sugar, flavonoids, and phenolic contents were recorded at 6, 287, 11, and 34 times higher than the control and 32, 107, 33, and 4 times more than fungus-inoculated wheat, respectively. This study is considered the first biocompatible approach to evaluate the potential of green-synthesized SeNPs as growth-promoting substances in wheat under the spot blotch stress and effective management strategy to inhibit fungal growth.

Comparison of pennywort and hyacinth in the development of membraned sediment plant microbial fuel cell for waste treatment.

Membraned Sediment Plant Microbial Fuel cells (SPMFCs) are appealing bioelectrochemical systems that generate power from organic compounds in sediment through exoelectrogen decomposition and are used to treat wastewater. This research was designed to develop a single-chambered sediment plant microbial fuel cell using two membrane electrodes; one carbon plate cathode and one anode. Wastewater and sediment mixture was sampled from Rawalpindi, Pakistan, and bacterial isolation was performed by serial dilution. Five strains were selected on the basis of morphology and growth-promoting characteristics. The selected strains were identified by 16s rRNA sequencing and designated as A (Geobacter sulfurreducens OP527025), B (Shawanella putrefaciens OP522353), C (Bacillus subtilus OP522349), D (Azospirillum humicireducens OP527050) and E (Pseudomonas putida OP526951). Consortium of five strains was developed. Two aquatic plants pennyworts (Hydrocotyle umbellate), and Hyacinth (Eichhornia crassipes) were used in the SPMFCs along with consortium. A maximum voltage of 1120mv was observed in SPMFCs treated with the consortium and water hyacinth, which was followed by 543.3 mv of SPMFCs treated with water pennyworts. Physicochemical analysis of wastewater showed a remarkable reduction of 74.5%, 71%, and 76% in nitrate, phosphate, and sulphate content of wastewater treated with microbes and water hyacinth. The heavy metal analysis showed a reduction of Zn (99.8%), Mg (99.9%), and Ni (98.4%) in SPMFCs treated with the consortium and water hyacinth. Mebraned SPMFCs showed an increase of 30% and 20% in shoot and root length of water hyacinth. A remarkable increase of 25%, 18%, and 12% were recorded in chlorophyll content, membrane stability index and relative water content of water hyacinth in SPMFCs treated with consortium compared to untreated cells. Osmolyte content had shown significant increase of 25% with consortium treated water hyacinth plant as compared to untreated one. An increase of 15%, 20% and 12% was noted in superoxide dismutase (SOD), peroxidase dismutase (POD) and catalase content of consortium treated water hyacinth as compared to control one. The present research gave insight into the potential of sediment plant microbial fuel cells along with aquatic plants for treatment of wastewater. This could be a effective method for removal of hazrdaous substances from wastewater and alternative approach for voltage production.

Structural breakdown and phytotoxic assessments of PE degradation through acid hydrolysis, starch addition and Pseudomonas aeruginosa bioremediation.

Vast amounts of plastic waste are causing serious environmental issues and urge to develop of new remediation methods. The aim of the study is to determine the role of inorganic (nitric acid), organic (starch addition), and biological (Pseudomonas aeruginosa) soil amendments on the degradation of Polyethylene (PE) and phytotoxic assessment for the growth of lettuce plant. The PE-degrading bacteria were isolated from the plastic-contaminated soil. The strain was identified as Pseudomonas aeruginosa (OP007126) and showed the highest degradation percentage for PE. PE was pre-treated with nitric acid as well as starch and incubated in the soil, whereas P. aeruginosa was also inoculated in PE-contaminated soils. Different combinations were also tested. FTIR analysis and weight reduction showed that though nitric acid was efficient in degradation, the combined application of starch and bacteria also showed effective degradation of PE. Phytotoxicity was assessed using morphological, physiological, and biochemical parameters of plant. Untreated PE significantly affected plants' physiology, resulting in a 45% reduction in leaf chlorophyll and a 40% reduction in relative water content. It also had adverse effects on the biochemical parameters of lettuce. Bacterial inoculation and starch treatment mitigated the harmful impact of stress and improved plants' growth as well as physiological and biochemical parameters; however, the nitric treatment proved phytotoxic. The observed results revealed that bacteria and starch could be effectively used for the degradation of pre-treated PE.

Treatment technologies for olive mill wastewater with impacts on plants.

Olive mill wastewater (OMW), produced during olive oil production, contains high levels of salt contents, organic matter, suspended particles, and toxic chemicals (particularly phenols), which all result in increased biological and chemical oxygen demand. Olive Oil Mills' Wastes (OMW), which have dark brown color with unpleasant smell, consist mainly of water, high organic (mainly phenols and polyphenols) and low inorganic compounds (e.g. potassium and phosphorus), as well as grease. OMW components can negatively affect soil's physical, chemical, and biological properties, rendering it phytotoxic. However, OMW can positively affect plants' development when it's applied to the soil after pretreatment and treatment processes due to its high mineral contents and organic matter. There are various approaches for removing impurities and the treatment of OMW including chemical, biological, thermal, physiochemical, and biophysical processes. Physical techniques involve filtration, dilution, and centrifugation. Thermal methods include combustion and pyrolysis; biological techniques use anaerobic and aerobic techniques, whereas adsorption and electrocoagulation act as physiochemical methods, and coagulation and flocculation as biophysical methods. In contrast, combined biological treatment methods use co-digestion and composting. A comparison of the effects of both treated and untreated OMW samples on plant development and soil parameters can help us to understand the potential role of OMW in increasing soil fertility. This review discusses the impacts of untreated OMW and treated OMW in terms of soil characteristics, seed germination, and plant growth. This review summarizes all alternative approaches and technologies for pretreatment, treatment, and recovery of valuable byproducts and reuse of OMW across the world.

Crop microbiome: their role and advances in molecular and omic techniques for the sustenance of agriculture.

MAIN CONCLUSION: This review is an effort to provide in-depth knowledge of microbe's interaction and its role in crop microbiome using combination of advanced molecular and OMICS technology to translate this information for the sustenance of agriculture. Increasing population, climate change and exhaustive agricultural practices either influenced nutrient inputs of soil or generating biological and physico-chemical deterioration of the soils and affecting the agricultural productivity and agro-ecosystems. Alarming concerns toward food security and crop production claim for renewed attention in microbe-based farming practices. Microbes are omnipresent (soil, water, and air) and their close association with plants would help to accomplish sustainable agriculture goals. In the last few decades, the search for beneficial microbes in crop production, soil fertilization, disease management, and plant growth promotion is the thirst for eco-friendly agriculture. The crop microbiome opens new paths to utilize beneficial microbes and manage pathogenic microbes through integrated advanced biotechnology. The crop microbiome helps plants acquire nutrients, growth, resilience against phytopathogens, and tolerance to abiotic stresses, such as heat, drought, and salinity. Despite the emergent functionality of the crop microbiome as a complicated constituent of the plant fitness, our understanding of how the functionality of microbiome influenced by numerous factors including genotype of host, climatic conditions, mobilization of minerals, soil composition, nutrient availability, interaction between nexus of microbes, and interactions with other external microbiomes is partially understood. However, the structure, composition, dynamics, and functional contribution of such cultured and uncultured crop microbiome are least explored. The advanced biotechnological approaches are efficient tools for acquiring the information required to investigate the microbiome and extract data to develop high yield producing and resistant variety crops. This knowledge fills the fundamental gap between the theoretical concepts and the operational use of these advanced tools in crop microbiome studies. Here, we review (1) structure and composition of crop microbiome, (2) microbiome-mediated role associated with crops fitness, (3) Molecular and -omics techniques for exploration of crop microbiome, and (4) current approaches and future prospectives of crop microbiome and its exploitation for sustainable agriculture. Recent -omic approaches are influential tool for mapping, monitoring, modeling, and management of crops microbiome. Identification of crop microbiome, using system biology and rhizho-engineering, can help to develop future bioformulations for disease management, reclamation of stressed agro-ecosystems, and improved productivity of crops. Nano-system approaches combined with triggering molecules of crop microbiome can help in designing of nano-biofertilizers and nano-biopesticides. This combination has numerous merits over the traditional bioinoculants. They stimulate various defense mechanisms in plants facing stress conditions; provide bioavailability of nutrients in the soil, helps mitigate stress conditions; and enhance chances of crops establishment.

Exogenous Application of Green Titanium Dioxide Nanoparticles (TiO2 NPs) to Improve the Germination, Physiochemical, and Yield Parameters of Wheat Plants under Salinity Stress.

Agriculture is the backbone of every developing country. Among various crops, wheat (Triticum aestivum L.) belongs to the family Poaceae and is the most important staple food crop of various countries. Different biotic (viruses, bacteria and fungi) and abiotic stresses (water logging, drought and salinity) adversely affect the qualitative and quantitative attributes of wheat. Among these stresses, salinity stress is a very important limiting factor affecting the morphological, physiological, biochemical attributes and grain yield of wheat. This research work was carried out to evaluate the influence of phytosynthesized TiO2 NPs on the germination, physiochemical, and yield attributes of wheat varieties in response to salinity. TiO2 NPs were synthesized using TiO2 salt and a Buddleja asiatica plant extract as a reducing and capping agent. Various concentrations of TiO2 nanoparticles (20, 40, 60 and 80 mg/L) and salt solutions (NaCl) (100 and 150 mM) were used. A total of 20 mg/L and 40 mg/L improve germination attributes, osmotic and water potential, carotenoid, total phenolic, and flavonoid content, soluble sugar and proteins, proline and amino acid content, superoxide dismutase activity, and reduce malondialdhehyde (MDA) content at both levels of salinity. These two concentrations also improved the yield attributes of wheat varieties at both salinity levels. The best results were observed at 40 mg/L of TiO2 NPs at both salinity levels. However, the highest concentrations (60 and 80 mg/L) of TiO2 NPs showed negative effects on germination, physiochemical and yield characteristics and causes stress in both wheat varieties under control irrigation conditions and salinity stress. Therefore, in conclusion, the findings of this research are that the foliar application of TiO2 NPs can help to improve tolerance against salinity stress in plants.

The role of plant-associated rhizobacteria in plant growth, biocontrol and abiotic stress management.

The rhizosphere is the region around the plant roots where maximum microbial activities occur. In the rhizosphere, microorganisms' beneficial and harmful activities affect plant growth and development. The mutualistic rhizospheric bacteria which improve plant growth and health are known as plant growth-promoting rhizobacteria (PGPR). They are very important due to their ability to help the plant in diverse ways. PGPR such as Pseudomonas, Bacillus, Azospirillum, Azotobacter, Arthrobacter, Achromobacter, Micrococcus, Enterobacter, Rhizobium, Agrobacterium, Pantoea and Serratia are now very well known. Rhizomicrobiome plays critical roles in nutrient acquisition and assimilation, improved soil texture, secreting and modulating extracellular molecules such as hormones, secondary metabolites, antibiotics and various signal compounds, all leading to the enhancement of plant growth and development. The microbes and compounds they secrete constitute valuable biostimulants and play pivotal roles in modulating plant stress responses. In this review, we highlight the rhizobacteria diversity and cutting-edge findings focusing on the role of a PGPR in plant growth and development. We also discussed the role of PGPR in resisting the adverse effects arising from various abiotic (drought, salinity, heat, heavy metals) stresses.

The potential of Bacillus subtilis and phosphorus in improving the growth of wheat under chromium stress.

AIM: Hexavalent chromium (Cr+6 ) is one of the most toxic heavy metals that have deteriorating effects on the growth and quality of the end product of wheat. Consequently, this research was designed to evaluate the role of Bacillus subtilis and phosphorus fertilizer on wheat facing Cr+6 stress. METHODS AND RESULTS: The soil was incubated with Bacillus subtilis and phosphorus fertilizer before sowing. The statistical analysis of the data showed that the co-application of B. subtilis and phosphorus yielded considerably more significant (p < 0.05) results compared with an individual application of the respective treatments. The co-treatment improved the morphological, physiological and biochemical parameters of plants compared with untreated controls. The increase in shoot length, root length, shoot fresh weight and root fresh weight was 38.17%, 29.31%, 47.89% and 45.85%, respectively, compared with untreated stress-facing plants. The application of B. subtilis and phosphorus enhanced osmolytes content (proline 39.98% and sugar 41.30%), relative water content and stability maintenance of proteins (86.65%) and cell membranes (66.66%). Furthermore, augmented production of antioxidants by 67.71% (superoxide dismutase), 95.39% (ascorbate peroxidase) and 60.88% (catalase), respectively, were observed in the Cr+6 - stressed plants after co-application of B. subtilis and phosphorus. CONCLUSION: It was observed that the accumulation of Cr+6 was reduced by 54.24%, 59.19% and 90.26% in the shoot, root and wheat grains, respectively. Thus, the combined application of B. subtilis and phosphorus has the potential to reduce the heavy metal toxicity in crops. SIGNIFICANCE AND IMPACT OF THE STUDY: This study explored the usefulness of Bacillus subtilis and phosphorus application on wheat in heavy metal stress. It is a step toward the combinatorial use of plant growth-promoting rhizobacteria with nutrients to improve the ecosystems' health.

Role of biochar and compost in cadmium immobilization and on the growth of Spinacia oleracea.

This research was carried out to evaluate the effect of biochar and compost application on Spinacia oleracea growth in cadmium contaminated soil. Cd toxicity decreased plant growth and biomass significantly and also negatively affected the physiological and biochemical attributes of plants. However, the application of biochar and compost improved the contaminated soil by reducing Cd toxicity and causing its immobilization, which in turn improved plant growth. The combined application of biochar and compost significantly (p < 0.05) enhanced biomass and photosynthetic pigments development in plants. The treatments also increased membrane stability index by 45.12% and enhanced water using efficiency by 218.22%, respectively. The increase in antioxidant activities was 76.03%, 29.02%, and 123.27% in superoxide dismutase, peroxidase, and catalase, respectively. The combined application also reduced the cadmium content (reduced 40.14% in root and 51.16% shoot), its translocation (19.67% decrease), and bioaccumulation (52.63% and 40.32% decrease in Cd content in shoot and root, respectively) in spinach plant. Among the two selected varieties of S. oleracea, Desi palak (V1) performed better as compared to Kanta palak (V2). It can be concluded that the combined application of biochar and compost is one of the best strategies to reduce the toxicity level of Cd in plants and to improve their growth.

Advances in Biochar and PGPR engineering system for hydrocarbon degradation: A promising strategy for environmental remediation.

In soil, polycyclic aromatic hydrocarbons (PAHs) have resulted in severe environmental deterioration, compromised soil characteristics, and negatively affect all life forms, including humans. Developing appropriate and effective clean-up technology is crucial in solving the contamination issues. The traditional methods to treat PHAs contaminated soil are less effective and not ecofriendly. Bioremediation, based on bioaugmentation and biostimulation approaches, is a promising strategy for remediating contaminated soil. The use of plant growth-promoting rhizobacteria (PGPR) as a bioaugmentation tool is an effective technique for treating hydrocarbon contaminated soil. Plant growth-promoting rhizobacteria (PGPR) are group of rhizospheric bacteria that colonize the roots of plants. Biochar is a carbon-rich residue, which acts as a source of nutrients, and is also a bio-stimulating candidate to enhance the activities of oil-degrading bacteria. The application of biochar as a nutrient source to bioremediate oil-contaminated soil is a promising approach for reducing PHA contamination. Biochar induces polyaromatic hydrocarbons (PAHs) immobilization and removes the contaminants by various methods such as ion exchange electrostatic attractions and volatilization. In comparison, PGPR produce multiple types of biosurfactants to enhance the adsorption of hydrocarbons and mineralize the hydrocarbons with the conversion to less toxic substances. During the last few decades, the use of PGPR and biochar in the bioremediation of hydrocarbons-contaminated soil has gained greater importance. Therefore, developing and applying a PGPR-biochar-based remediating system can help manage hazardous PAH contaminated soil. The goal of this review paper is to (i) provide an overview of the PGPR mechanism for degradation of hydrocarbons and (ii) discuss the contaminants absorbent by biochar and its characteristics (iii) critically discuss the combined effect of PGPR and biochar for degradation of hydrocarbons by decreasing their mobility and bioavailability. The present review focuses on techniques of bioaugmentation and biostimulation based on use of PGPR and biochar in remediating the oil-contaminated soil.

Designing of pretreatment filter technique for reduction of phenolic constituents from olive-mill wastewater and testing its impact on wheat germination.

Olive oil extraction produces a great volume of olive mill wastewater (OMW), which is considered a serious ecological challenge. In this study, we have designed and tested a trickling filter consisting of seven different layers of natural material, including (coarse gravel, fine gravel, lime (Ca (OH)2), sand (SiO2), carbon char, sponge/mesh), to treat OMW. The filter process involved physical separation, filtration, coagulation and adsorption with the removal of COD (69.8%), BOD (40.2%), Phenolic contents (90%), pH (41%), EC (41.6%) and total suspended solids (TSS) (69%). Our results have shown that treated OMW has a high potential oxidant activity. T7, Untreated OMW at 1:6 dilutions, had the strongest correlation (i.e. 0.97), while untreated OMW had the lowest IC50 (7.62 g ml-1), which shown the best DPPH radical scavenging capabilities. While pure Untreated OMW has the maximum radical scavenging activity, 63%, treated (1:6) diluted OMW exhibits the lowest value i. e 9% when phosphomolybdate assay was done. HPLC analysis showed that the trickling filter removed the vanillic acid, caffeic acid and reduced the contents of phenolic components such as gallic acid, hydroxytyrosol, vanillin, quercetin and catechol. Filtered OMW was also tested for its germination efficacy at various dilutions (1:0, 1:2, 1:4, 1:6). A remarkable improvement in germination percentage, germination index, seedling length, seedling vigor index, promptness index, stress tolerance index (76.7%, 68.4%, 51.7%, 82.1%, 54.8%, and 66.7%, respectively) has shown the efficiency of treated OMW at 1:6 dilutions. The results from this study show the efficiency of our filter design which can be further used.