SEM Evaluation of Marginal Adaptation E-Max Crowns Manufactured by Printing-Pressed and Milling.

Dental crown marginal adaptation is a matter of the success of dental restoration treatment. Nowadays, there are many technological ways for crown manufacturing, such as tridimensional printing of an exactly desired shape through CAD-assisted systems and the appropriate shape milling of a predesigned bulk crown. Both methods are developed for patient benefits. The current research aims to investigate the marginal adaptation of E-Max crowns manufactured by printing-pressed and milling methods. The in vitro cementation procedures were effectuated on healthy teeth extracted for orthodontic purposes according to the standard procedures and the marginal adaptation was investigated with SEM microscopy. The restoration overview was inspected at a magnification of 100× and the microstructural details at 400×. The integrity of marginal adaptation was properly inspected in identical samples on segments of 2 mm from each buccal, palatal, distal and mesial side. The obtained results reveal a good marginal adaptation for all samples, with some particularities. The statistical analysis shows that the best values of the marginal adaptation were obtained for vestibular/buccal and palatal sides of the teeth being situated around 90-95%, while the values obtained for distal and mesial sides are slightly lower such as 80-90%. Furthermore, it was observed that the milled crowns presents better marginal adaptations than the printed-pressed ones, sustained by the statistical p < 0.05. This indicates that the milling process allows a better fit of the crown to the tooth surface and preserves the integrity of the bonding cement layer.

Endodontic Dentistry: Analysis of Dentinal Stress and Strain Development during Shaping of Curved Root Canals.

BACKGROUND: Endodontic shaping causes stress and strain in the root canal dentin. Dentin microcracks have the potential to be later followed by root fractures occurring under the occlusal load. The aim of our research was to theoretically determine the values of such dentinal states of stress and strain during the endodontic shaping of curved root canals using finite element analysis (FEA). METHODS: To highlight the stress concentrations in dentin, two geometric models were created considering the volume of the curved dental root and the contact between the endodontic file and the root canal walls. The application of forces with different values was simulated both on a uniform curved root canal and on a root canal with an apical third curvature of 25° as they would be applied during the preparation of a root canal. RESULTS: In the case of the first model, which was acted upon with a force of 5 N, the deformations of the root canal appeared along the entire working length, reaching the highest values in the apical third of the root, although there were no geometric changes in the shape of the root canal. Regarding the second root model, with an apical third curvature of 25°, although the applied force was 2 N, the deformations were accompanied by geometric changes in the shape of the root, especially in the upper part of the apical third. At a higher force of 7 N exerted on the endodontic file, the geometric shape changed, and the deformation reached extreme critical values. The resulting tensile stresses appearing in the experimental structure varied similarly to the deformations. CONCLUSIONS: Significant stress and strain can develop, especially in the apical third of curved root canals during their shaping, and the risk of cracks is higher for endodontically treated teeth presenting severe curvatures in the apical third of the root.

Perceptions and Expectations of Academic Staff in Bucharest towards the COVID-19 Pandemic Impact on Dental Education.

Dental education was severely challenged by the COVID-19 pandemic worldwide. The evaluation of the viewpoint of the dental teachers of the Faculty of Dentistry at "Carol Davila" University of Medicine and Pharmacy in Bucharest, Romania, on these exceptional circumstances' consequences was the objective of this paper. A cross-sectional study was conducted in April 2022, on the academic staff who reported their perceptions of the emotional and educational impact of the pandemic by completing a Google Forms questionnaire. Although a significant emotional impact of the pandemic was reported by over a third of the participants (31.2%), most of them being teachers of fifth-year dental students (p = 0.019), the perceived stress had an impact on the teaching performance in few of them (14%), the quality of sleep remaining unaffected in most of them (53.7%), whereas the level of anxiety was low (57%). An educational impact regarding the techno difficulties during the online transition was mentioned by few respondents (16.1%), with male teaching staff facing the fewest problems (p = 0.024), as well as low levels of difficulties in transmitting academic information (11.9), with men also being the most unaffected (p = 0.006). More than half of the participants (59.1%) rather see digital and/or virtual education during the pandemic as having adverse effects on the educational system, the most sceptical being teachers of the fifth (p = 0.001) and sixth years (p = 0.001). The COVID-19 pandemic affected the academic staff of the Faculty of Dentistry at "Carol Davila" University of Medicine and Pharmacy in Bucharest, Romania, not only at a personal level but also at a professional, pedagogical one, due to the introduction of the online teaching system followed by the hybrid one. Age group, gender, and teaching year differentiated the degree of emotional and educational impairment.

Comparative Assessment of the Functional Parameters for Metal-Ceramic and All-Ceramic Teeth Restorations in Prosthetic Dentistry-A Literature Review.

The metal-ceramic fixed partial prosthesis is the golden standard for posterior tooth restorations. Following the demands of patients and clinicians for metal-free restorations, all-ceramic materials were developed as they offer an adequate alternative with better optical qualities and good mechanical properties. This study aims to carry out a bibliographic review to assess the survival rate and the biological and technical complications of all-ceramic and metal-ceramic fixed partial dentures. An electronic search for articles in the English language literature was performed using PubMed (MEDLINE). This literature review focused on research studies between 2010 and 2020 that performed clinical studies on tooth-supported fixed partial dentures with a mean follow-up of at least 3 years. All the studies, which analyzed the survival and complications of tooth-supported fixed partial dentures, were included. Thus, 14 studies reporting on 756 all-ceramic and 160 metal-ceramic fixed partial dentures met the inclusion criteria. A comparative analysis was carried out based on all the data existing in the studies included in this review. The metal-ceramic fixed partial dentures showed survival rates of 95% to 100% at 3-, 5-, and 10-year follow-up periods. Zirconia fixed partial dentures were reported to have survival rates of 81% to 100% at 3-, 5-, 9-, 10-year follow-up evaluations. The reinforced glass-ceramic fixed partial dentures showed survival rates of 70% to 93.35% at 5 years, while the alumina FPDs showed a survival rate of 68% at 3 years follow-up. The incidence of caries and loss of vitality were reported as higher for all-ceramic prostheses as compared to the metal-ceramic ones. A significant framework fracture was reported for glass-infiltrated alumina fixed partial dentures in comparison to metal-ceramic fixed partial dentures. All-ceramic and metal-ceramic restorations showed similar survival rates after 3 years, although all-ceramic restorations have problems with technical complications such as chipping, which can lead to framework fractures over time.

Oral Health Related Quality of Life and Prosthetic Status among Institutionalized Elderly from the Bucharest Area: A Pilot Study.

The aim of the study was to assess the oral health related quality of life (OHRQoL) of elderly in care homes, one of Romania's most vulnerable social categories, to correlate it to sociodemographic, oral health parameters, and prosthodontic status. Therefore, a cross-sectional study was performed on 58 geriatrics divided into 3 age groups, who were clinically examined and answered the oral health impact profile (OHIP-14) questionnaire. Very high rates of complete edentulism in the oldest-old subgroup (bimaxillary in 64.3%; mandibular in 64.3%; maxillary in 85.7%), and alarming frequencies in the other subgroups (middle-old and youngest-old), statistically significant differences between age groups being determined. The OHIP-14 mean score was 14.5. Although not statistically significant, females had higher OHIP-14 scores, also middle-old with single maxillary arch, single mandibular arch, and bimaxillary complete edentulism, whether they wore dentures or not, but especially those without dental prosthetic treatment in the maxilla. A worse OHRQoL was also observed in wearers of bimaxillary complete dentures, in correlation with periodontal disease-related edentulism, in those with tertiary education degree, and those who came from rural areas. There were no statistically significant correlations of OHRQoL with age, total number of edentulous spaces or edentulous spaces with no prosthetic treatment. In conclusion, despite poor oral health and prosthetic status of the institutionalized elderly around Bucharest, the impact on their wellbeing is comparatively moderate.

Self-Perceived Impact of COVID-19 Pandemic by Dental Students in Bucharest.

All social and economic systems worldwide, including the educational one have been disrupted by escalating the global COVID-19 pandemic. One of the most impacted areas were the medical and dental education fields, due to the forced break from clinical practice during the lockdown, which affected both the educational part, as well as the patients. Thus, the main goal of our research was to investigate the impact of the COVID-19 pandemic on the dental students' education as related to their perceptions and evaluations, in Carol Davila University of Medicine and Pharmacy, Bucharest, Romania. A cross-sectional study was conducted on 878 dental students who reported their perception of the psychological and educational impact of this period by completing a Google Forms questionnaire. Collected data were statistically analyzed using Stata/IC 16. There was a severe psychological impact among the respondents, the levels of stress being perceived as high and very high (33.83%, n = 297; 28.59%, n = 251), similar to high and very high anxiety feelings (26.54%, n = 233; 24.26%, n = 213). Very high educational impact from the point of view of the acquisition of practical skills (48.52%, n = 426) and future professional perspectives (38.95%, n = 342) were recorded. While online theoretical learning ability was principally low (37.93%, n = 333) despite consistently modified time allocated to the individual study (44.35%, n = 389), most of the students evaluated the efficiency of lecturers in online courses as neutral (41.12%, n = 361). New dentistry teaching programs will have to be adopted taking into account the dynamics of the pandemic and its strong impact on our students, in order to improve both their wellbeing and the sustainability of dental education.

Anatomical features and prosthetic considerations of edentulous patients with mandibular reconstruction with autograft performed more than 40 years ago.

In this manuscript there are presented two cases, both with mandibular reconstruction with autograft harvested from the iliac crest, performed more than 40 years ago, but with different bone defect etiology, i.e., mandibular dysplasia and mandibular fracture, both having currently extensive tooth loss in the mandible, being in need for prosthetic rehabilitation. These cases confirm that reconstructive surgery of mandibular bone defects with autograft from iliac crest has a satisfactory long-term outcome, providing acceptable conditions for prosthetic rehabilitation. Bone resorption in the grafted area seems to be related to the etiology of bone defect, and influenced by preservation of dental occlusion and masticatory function. Reconstructive surgery made decades ago has sequelae that increase the difficulty of prosthetic treatment of edentulous patient, that need to be proper evaluated and included in the treatment plan, in an individualized approach, in order to obtain an acceptable functional outcome.

Clinical study on thermography, as modern investigation method for Candida-associated denture stomatitis.

Candida-associated denture stomatitis is an infectious inflammatory condition of the oral mucosa, with frequent recurrences. The aim of this study was to assess the use of infrared thermography as investigation method for Candida-associated denture stomatitis (as inflammatory disorder of the maxillary denture bearing area), by comparing disease and non-disease groups. An observational study was conducted on maxillary edentulous patients treated by acrylic dentures, with and without Candida-associated denture stomatitis. Diagnostic test methods used were clinical examination for denture stomatitis and conventional microbiological culture method for oral candidiasis. Thermography analysis of the maxillary denture bearing area was made using the ThermaCAM PM350 infrared camera (Inframetrics, Flir Systems) and ThermaGram Pro 95 software, data being acquired by usage of standard protocol of thermographic registrations. The sample included 52 patients, 21 with and 31 without Candida-associated denture stomatitis. The temperature of the maxillary mucosa corresponding to the denture bearing area was found to be statistically significantly higher in Candida-associated denture stomatitis (mean 36.20°C), compared to healthy oral mucosa (mean 34.85°C). The thermal threshold value of 35.44°C was identified as best differentiating a pathological from normal state of the maxillary mucosa corresponding to the denture bearing area. In conclusion, infrared thermography, a rapid non-invasive investigation method, has the premises to bring valuable data in inflammatory disorders of the maxillary denture bearing area, as Candida-associated denture stomatitis that may be used for screening, diagnostic or monitoring purposes.