Plastic waste recycling: existing Indian scenario and future opportunities.

This review article aims to suggest recycling technological options in India and illustrates plastic recycling clusters and reprocessing infrastructure for plastic waste (PW) recycling in India. The study shows that a majority of states in India are engaged in recycling, road construction, and co-processing in cement kilns while reprocessing capabilities among the reprocessors are highest for polypropylene (PP) and polyethylene (PE) polymer materials. This review suggests that there are key opportunities for mechanical recycling, chemical recycling, waste-to-energy approaches, and bio-based polymers as an alternative to deliver impact to India's PW problem. On the other hand, overall, polyurethane, nylon, and polyethylene terephthalate appear most competitive for chemical recycling. Compared to conventional fossil fuel energy sources, polyethylene (PE), polypropylene (PP), and polystyrene are the three main polymers with higher calorific values suitable for energy production. Also, multi-sensor-based artificial intelligence and blockchain technology and digitization for PW recycling can prove to be the future for India in the waste flow chain and its management. Overall, for a circular plastic economy in India, there is a necessity for a technology-enabled accountable quality-assured collaborative supply chain of virgin and recycled material. Supplementary Information: The online version contains supplementary material available at 10.1007/s13762-022-04079-x.

Development of photocatalytic paint based on TiO2 and photopolymer resin for the degradation of organic pollutants in water.

While the use of TiO2 nanoparticles in the form of slurry/suspension requires energy-intensive separation processes, its immobilization in solid support may open new opportunities in the area of sustainable water treatment technologies. In this study, a novel method for the development of photocatalytic paint based on TiO2 nanoparticles and acrylate-based photopolymer resin is reported. The paint (TiO2@polymer) was applied on substrates such as plastic petri dish and glass jar, which was polymerized/solidified by ultraviolet light irradiation. The painted petri dish and glass jar were used for the photocatalytic degradation of model organic pollutants viz. methyl orange (MO), methylene blue (MB), and indole in deionized water, simulated fresh drinking water, and tap water matrices. The photocatalytic degradation studies were performed under sunlight and UV-B light were used for. The sunlight-assisted photocatalytic degradation of MO and MB was found to be faster and more efficient than the UV-B light-assisted ones. Under UV-B light irradiation, it took 120 min to degrade about 80% of 6 ppm MB solution, whereas under sunlight irradiation it took 60 min to degrade about 90% of the same MB solution. The photocatalytic paint generated hydroxyl radical (·OH) under the UV-B and sunlight irradiation, which was studied by the terephthalic acid fluorescence tests. Further, the potential release of TiO2 during the exposure to UV irradiation was studied by single particle ICP-MS analysis.

Evaluation of Antioxidant Activity of Phytol Using Non- and Pre-Clinical Models.

BACKGROUND: Phytol (3,7,11,15-tetramethylhexadec-2-en-1-ol; PHY), the alcoholic diterpenoid is particularly interesting due to its diverse activities found in literature. This study evaluated in vitro and in vivo antioxidant capacity of PHY. METHODS: We conducted DPPH• (2,2-diphenyl-1-picrylhydrazyl) and ABTS•+ (2,2'-azino-bis(3- ethylbenzthiazoline-6-sulphonic acid)) radical scavenging tests as in vitro, while Saccharomyces cerevisiae test as in vivo. For in vitro tests, trolox and for in vivo test hydrogen peroxide (H2O2) were taken as standard and stressor, respectively. Additionally, we measured the superoxide dismutase (SOD), catalase (CAT), reduced glutathione (GSH), lipid peroxidation (LP) and nitrite (NO2 -) contents in mouse hippocampus taking 0.05% Tween 80 dissolved in 0.9% saline (0.25 ml) and ascorbic acid (250 mg/kg; AA) as vehicle and standard, respectively. PHY was administered at doses 25, 50 and 75 mg/kg. In the latter case, all the treatments were administered via intraperitoneal (i.p.) route. RESULTS: PHY at 7.2 µg/ml exhibited 59.89 ± 0.73% and 62.79 ± 1.99% scavenging capacity of DPPH• and ABTS•+, respectively. In S. cerevisiae strains, PHY showed prominent protective effects. Moreover, in Swiss mouse hippocampus; PHY reduced the LP and NO2 - contents, while increased in GSH, SOD and CAT activities. CONCLUSION: PHY exerted antioxidant potential in our current non- and preclinical test systems and can be a good candidate for the development of treatments of oxidative stress mediated diseases.

Genotoxic and Mutagenic Activity of PT-31.

Toxicity assessment is an important tool in drug discovery and development. PT-31 (3-(2-chloro-6-fluorobenzyl)-imidazolidine-2,4-dione) is an imidazolidine- 2,4-dione analogue of clonidine that displays a dose-dependent analgesic profile and synergism with morphine. This study investigated genotoxic and mutagenic effects of PT-31 in Swiss mice. For this, ten mice (M1:F1) per group were treated with PT-31 intraperitoneally (i.p.) at 0.5, 1.0 and 5.0 mg/kg. The dimethyl sulfoxide (0.5%) and 50 mg/kg cyclophosphamide (i.p.) were taken as negative (NC) and positive controls, respectively. The bone marrow cells were collected after 24 h, while peripheral blood after 30 min, 12 h and 24 h of the treatment for the comet assay. Micronucleus (MN) test was performed only on bone marrow cells collected after 24 h of i.p. treated animals. A hundred cells were considered for the comet assay and quantification of the index of damage and frequency of damage. Lack of genotoxicity with 0.5 mg/kg of PT-31 and DNA repair ability with 0.5 and 1.0 mg/kg doses at 12 h and 24 h in comparison to NC group was observed (P<0.05). There was an increase in MN formation by PT-31 1.0 and 5.0 mg/kg treated female and male mice, respectively. PT-31 induced genotoxic and mutagenic effects only in higher doses.

Isolation and Identification of Plant Growth Promoting Rhizobacteria from Cucumber Rhizosphere and Their Effect on Plant Growth Promotion and Disease Suppression.

Plant growth promoting rhizobacteria (PGPR) are the rhizosphere bacteria that may be utilized to augment plant growth and suppress plant diseases. The objectives of this study were to identify and characterize PGPR indigenous to cucumber rhizosphere in Bangladesh, and to evaluate their ability to suppress Phytophthora crown rot in cucumber. A total of 66 isolates were isolated, out of which 10 (PPB1, PPB2, PPB3, PPB4, PPB5, PPB8, PPB9, PPB10, PPB11, and PPB12) were selected based on their in vitro plant growth promoting attributes and antagonism of phytopathogens. Phylogenetic analysis of 16S rRNA sequences identified these isolates as new strains of Pseudomonas stutzeri, Bacillus subtilis, Stenotrophomonas maltophilia, and Bacillus amyloliquefaciens. The selected isolates produced high levels (26.78-51.28 µg mL(-1)) of indole-3-acetic acid, while significant acetylene reduction activities (1.79-4.9 µmole C2H4 mg(-1) protein h(-1)) were observed in eight isolates. Cucumber plants grown from seeds that were treated with these PGPR strains displayed significantly higher levels of germination, seedling vigour, growth, and N content in root and shoot tissue compared to non-treated control plants. All selected isolates were able to successfully colonize the cucumber roots. Moreover, treating cucumber seeds with these isolates significantly suppressed Phytophthora crown rot caused by Phytophthora capsici, and characteristic morphological alterations in P. capsici hyphae that grew toward PGPR colonies were observed. Since these PGPR inoculants exhibited multiple traits beneficial to the host plants, they may be applied in the development of new, safe, and effective seed treatments as an alternative to chemical fungicides.