SEM Evaluation of Marginal Adaptation E-Max Crowns Manufactured by Printing-Pressed and Milling.

Dental crown marginal adaptation is a matter of the success of dental restoration treatment. Nowadays, there are many technological ways for crown manufacturing, such as tridimensional printing of an exactly desired shape through CAD-assisted systems and the appropriate shape milling of a predesigned bulk crown. Both methods are developed for patient benefits. The current research aims to investigate the marginal adaptation of E-Max crowns manufactured by printing-pressed and milling methods. The in vitro cementation procedures were effectuated on healthy teeth extracted for orthodontic purposes according to the standard procedures and the marginal adaptation was investigated with SEM microscopy. The restoration overview was inspected at a magnification of 100× and the microstructural details at 400×. The integrity of marginal adaptation was properly inspected in identical samples on segments of 2 mm from each buccal, palatal, distal and mesial side. The obtained results reveal a good marginal adaptation for all samples, with some particularities. The statistical analysis shows that the best values of the marginal adaptation were obtained for vestibular/buccal and palatal sides of the teeth being situated around 90-95%, while the values obtained for distal and mesial sides are slightly lower such as 80-90%. Furthermore, it was observed that the milled crowns presents better marginal adaptations than the printed-pressed ones, sustained by the statistical p < 0.05. This indicates that the milling process allows a better fit of the crown to the tooth surface and preserves the integrity of the bonding cement layer.

Zirconia-Reinforced Lithium Silicate Ceramic in Digital Dentistry: A Comprehensive Literature Review of Our Current Understanding.

Zirconia-reinforced lithium silicate (ZLS) ceramic is a new innovative dental material with unique a chemical composition that is designed to combine harmoniously with the appropriate optical properties of lithium disilicate and the enhanced mechanical strength of zirconia. A thorough understanding of ZLS materials is essential for both clinicians and dental technicians. At present, the mechanical behavior and optical properties of the ZLS ceramic system have not been extensively researched, and there is still a lack of consensus regarding the fabrication process and clinical behavior of ZLS all-ceramic restorations. The aim of the present study was to present a selection of comprehensive information concerning zirconia-reinforced lithium silicate ceramics and their optical and mechanical properties, as well as to assess data regarding cementation procedures and clinical outcomes for ZLS all-ceramic restorations. Three electronic databases (PubMed, Web of Science, and the Cochrane Library) were used for the research by two independent reviewers. The search was limited to articles published in the English language, as well as clinical and in vitro studies of color and studies on mechanical behavior and the cementation procedures of ZLS restorations. The exclusion criteria comprised abstracts, questionnaire-based studies, case reports, literature reviews, and studies that were not available in English. Zirconia-reinforced lithium-silicate-based ceramic presents a unique and complex microstructure that increases mechanical resistance but decreases aesthetic appearance, especially its translucency, due to tetragonal zirconia content. A material's thickness, the color of the underlying tooth structure, and the resin cement shade are important factors that influence the final shade and aesthetic appearance of ZLS restorations. Mechanical properties, which are defined by the fracture toughness, flexural strength, elastic modulus, and hardness of ZLS ceramic are higher compared to feldspathic, lithium disilicate, and hybrid ceramics, as well as resin nanoceramics; however, they are lower than translucent or high-translucency zirconia. Acid etching, sandblasting, and laser etching represent the most used methods to prepare the ZLS restoration surfaces for proper bonding procedures.

Comparative Assessment of the Functional Parameters for Metal-Ceramic and All-Ceramic Teeth Restorations in Prosthetic Dentistry-A Literature Review.

The metal-ceramic fixed partial prosthesis is the golden standard for posterior tooth restorations. Following the demands of patients and clinicians for metal-free restorations, all-ceramic materials were developed as they offer an adequate alternative with better optical qualities and good mechanical properties. This study aims to carry out a bibliographic review to assess the survival rate and the biological and technical complications of all-ceramic and metal-ceramic fixed partial dentures. An electronic search for articles in the English language literature was performed using PubMed (MEDLINE). This literature review focused on research studies between 2010 and 2020 that performed clinical studies on tooth-supported fixed partial dentures with a mean follow-up of at least 3 years. All the studies, which analyzed the survival and complications of tooth-supported fixed partial dentures, were included. Thus, 14 studies reporting on 756 all-ceramic and 160 metal-ceramic fixed partial dentures met the inclusion criteria. A comparative analysis was carried out based on all the data existing in the studies included in this review. The metal-ceramic fixed partial dentures showed survival rates of 95% to 100% at 3-, 5-, and 10-year follow-up periods. Zirconia fixed partial dentures were reported to have survival rates of 81% to 100% at 3-, 5-, 9-, 10-year follow-up evaluations. The reinforced glass-ceramic fixed partial dentures showed survival rates of 70% to 93.35% at 5 years, while the alumina FPDs showed a survival rate of 68% at 3 years follow-up. The incidence of caries and loss of vitality were reported as higher for all-ceramic prostheses as compared to the metal-ceramic ones. A significant framework fracture was reported for glass-infiltrated alumina fixed partial dentures in comparison to metal-ceramic fixed partial dentures. All-ceramic and metal-ceramic restorations showed similar survival rates after 3 years, although all-ceramic restorations have problems with technical complications such as chipping, which can lead to framework fractures over time.

Oral Health Related Quality of Life and Prosthetic Status among Institutionalized Elderly from the Bucharest Area: A Pilot Study.

The aim of the study was to assess the oral health related quality of life (OHRQoL) of elderly in care homes, one of Romania's most vulnerable social categories, to correlate it to sociodemographic, oral health parameters, and prosthodontic status. Therefore, a cross-sectional study was performed on 58 geriatrics divided into 3 age groups, who were clinically examined and answered the oral health impact profile (OHIP-14) questionnaire. Very high rates of complete edentulism in the oldest-old subgroup (bimaxillary in 64.3%; mandibular in 64.3%; maxillary in 85.7%), and alarming frequencies in the other subgroups (middle-old and youngest-old), statistically significant differences between age groups being determined. The OHIP-14 mean score was 14.5. Although not statistically significant, females had higher OHIP-14 scores, also middle-old with single maxillary arch, single mandibular arch, and bimaxillary complete edentulism, whether they wore dentures or not, but especially those without dental prosthetic treatment in the maxilla. A worse OHRQoL was also observed in wearers of bimaxillary complete dentures, in correlation with periodontal disease-related edentulism, in those with tertiary education degree, and those who came from rural areas. There were no statistically significant correlations of OHRQoL with age, total number of edentulous spaces or edentulous spaces with no prosthetic treatment. In conclusion, despite poor oral health and prosthetic status of the institutionalized elderly around Bucharest, the impact on their wellbeing is comparatively moderate.

Morpho-histological assessment of the periodontal support structures under the action of excessive occlusal forces and under the influence of nicotine.

Smoking and occlusal trauma are two factors that can interfere with bone homeostasis. The aim of this study was to evaluate the histocellular changes occurring in the periodontal ligament and alveolar bone during the action of excessive occlusal forces, and to assess the influence of nicotine on the alveolar bone loss in teeth subjected to occlusal trauma. MATERIALS AND METHODS: Fifty-six Wistar rats were randomized into seven groups (n=8). Animals were exposed to nicotine and occlusal trauma for 7, 14 and 30 days. Three groups were exposed to occlusal trauma alone, another three groups were exposed to occlusal trauma and nicotine, and one group was not exposed to any treatment. RESULTS: Periodontal lesions induced in the first stage (7-14 days) manifested by a moderate increase of the periodontal space, a multiplication, thickening and elongation of periodontal fibers, as well as their condensation in the middle area of the periradicular space. Regarding bone changes induced by occlusal trauma, groups 5 and 7 (occlusal trauma and nicotine administration) had higher bone losses compared to groups 1, 2, 3, 4 and 6. This study demonstrated that nicotine significantly affected the alveolar bone. CONCLUSIONS: The induced occlusal trauma caused obvious tissue damage. At the same time, it was found that nicotine enhanced alveolar bone resorption, increased tooth mobility and induced an exacerbation of inflammatory processes.