Effect of 2-hydroxyethyl methacrylate pre-treatment on micro-tensile bond strength of resin composite to demineralized dentin.

The purpose of this study was to evaluate the effect of 2-hydroxyethyl methacrylate (HEMA) application on the micro-tensile bond strength of resin composite to demineralized dentin. Artificially demineralized lesions were formed on bovine dentin surfaces and treated with 10, 30, 50, 70 and 100 wt% HEMA aqueous solution. The surfaces were then applied and covered with SE Bond and AP-X according to the manufacturer's instruction. After immersion in 37 degrees C water for 24 h, bond strength were measured using a universal testing machine. Bond strengths to both demineralized dentin and normal dentin, without HEMA application, were also measured. Scanning electron microscopic (SEM) observation and confocal laser scanning microscopy (CLSM) analysis at the resin-dentin interface were also performed. The bond strength data were statistically compared with anova and Scheffe's test (P < 0.05). Bond strength to demineralized dentin treated with over 30 wt% HEMA aqueous solution were significantly higher than that to demineralized dentin without HEMA application, but significantly lower than that to normal dentin. SEM observation revealed that the hybrid layer and resin-tags thickened and lengthened with HEMA application. In CLSM, the diffusion of adhesive primer into demineralized dentin increased with HEMA application. These results indicated that HEMA application might increase the bond strength to demineralized dentin by the enhancement of resin monomer penetration of HEMA.

Micro-tensile bond strength of self-etching primer adhesive systems to human coronal carious dentin.

The aim of this study was to evaluate the micro-tensile bond strengths of three self-etching primer adhesive systems to normal dentin (ND), caries-affected dentin (CAD) and caries-infected dentin (CID). Human extracted molars with caries were used, and flat dentin surfaces ground by 600-grit SiC paper were prepared. The surfaces were dyed using Caries-Detector solution, treated with Clearfil SE Bond, Mac-Bond II and UniFil Bond, and then covered with resin composites according to manufacturer's instructions. After immersion in 37 degrees C water for 24 h, the teeth were serially sectioned into multiple slices. Each slice was distinguished into ND, CAD and CID groups by the degree of staining, and the bond strength was measured in a universal testing machine. Scanning electron microscopic (SEM) observation was also performed. For statistical analysis, anova and Scheffe's test were used (P < 0.05). The bond strengths of the three adhesive systems to CAD and CID were significantly lower than those to ND. There was significant difference in the bond strength to ND between Clearfil SE Bond and UniFil Bond, but no significant differences to CAD and CID among the three adhesive systems. On SEM, the hybrid layers in CAD and CID showed more porous structures compared with ND. The results indicated that the bond strengths to CAD and CID were not affected by a variety of self-etching primer adhesive systems because of the porous hybrid layer formation in carious dentin.

Confocal laser scanning microscopic analysis of early plaque formed on resin composite and human enamel.

The purpose of this study was to analyse quantitatively the early bacterial plaque formed on resin composite and human enamel in vivo, using a confocal laser scanning microscope. Test pieces of resin composite and human enamel were retained at the buccal surfaces of the upper first molars of three volunteers for 4, 8 and 24 h to allow plaque formation. Then, the specimens were immersed in propidium iodide in phosphate-buffered saline to stain adherent bacteria and observed with a confocal laser scanning microscope. The ratios of the area occupied by microorganisms to the whole area of the optical field were calculated using a photo-image analysis system. The thickness of the plaque was also measured. Quantitative analysis revealed that the resin composite showed significantly higher bacterial adherence than human enamel throughout the test period. A difference was noticed in the morphology of the bacteria between the two groups. Our findings suggest that resin composite shows higher bacteria adherence during early plaque formation compared with human enamel. In addition, the present findings may suggest a presence of the difference in bacterial composition of plaque in both specimens.

Effect of fluoride-releasing adhesive system on decalcified dentin.

The aim of this study was to evaluate the effect of fluoride-releasing adhesive systems on human decalcified dentin in vitro. Two fluoride-releasing adhesive systems, Reactmer bond (RB, Shofu) and ABF (AF, Kuraray), an experimental system, and a commercial adhesive system without fluoride release, SE bond (SE, Kuraray), were used in this study. The amount of fluoride release from adhesive in deionized water was measured every week for 10 weeks. Class V cavities were prepared on extracted human pre-molars and decalcified dentin was promoted by using a bacterial caries induction system at the cavity floor. The cavities preserving decalcified dentin were restored with resin composite (AP-X, Kuraray) after treatment by each adhesive system. The specimens without treatment by adhesive system and restoration were used for control. The specimens with restoration were then incubated for 4 weeks at 37 degrees C, 100% humidity. Microradiographs of the specimens showed that the radiopacities of the decalcified dentin layers in RB and AF groups with fluoride release were significantly higher than those in SE or control groups without fluoride release. This result suggested that the fluoride-releasing adhesive systems enhanced mineralization of decalcified dentin.

Regulation of fluoride ion release from Na2SiF6 contained in resin based on hydrophobic siloxane layer coating.

Regulation of fluoride release from restorative resin or sealant is beneficial to patients as it will prevent the occurrence of the secondary caries. In this study, we evaluated whether or not the formation of a hydrophobic polysiloxane layer on the surface of the fluoride compound could contribute to the regulation of fluoride release from resin. First, sodium hexafluorosilicate (Na2SiF6) powder was treated with gamma-methacryloxypropyltrimethoxysilane (gamma-MPTS) and analysed with scanning electronmicroscopy (SEM), Fourier-transform infrared spectroscopy (FT-IR) and electron spectroscopy for chemical analysis (ESCA). Analysis revealed that a hydrophobic polysiloxane layer was formed on the surface of Na2SiF6 powder. Heat treatment commonly used during gamma-MPTS treatment was not necessary for the polysiloxane layer formation on the surface of Na2SiF6 powder. Then Na2SiF6 powder treated with gamma-MPTS was loaded in bis-GMA/TEGDMA resin, immersed in distilled water and fluoride release was measured using a fluoride electrode. We found that the rate of fluoride release was significantly lower from the resin containing Na2SiF6 powder treated with c-MPTS. We concluded, therefore, that c-MPTS treatment and the resulting hydrophobic polysiloxane layer formation are very effective for the regulation of fluoride release from resin.

Inhibition of artificial secondary caries by fluoride-releasing adhesives on root dentin.

Fluoride-releasing materials can be expected to inhibit the secondary caries. The aim;of this study was to evaluate the effect of fluoride-releasing adhesives on inhibition of secondary caries in outer and wall lesions. Two commercial fluoride-releasing adhesives, Reactmer bond (RB) and One-up bond F (OB), and a commercial adhesive without fluoride release, Mac-bond II (MB), were used prior to placement of restorative materials without fluoride release, Lite-fil II A (LF) and Estelite (EL), and a fluoride-releasing restorative material, Reactmer paste (RP). Class V cavities prepared on extracted human premolars were restored with various combinations of the materials: MB/EL, OB/EL, RB/LF and RB/RP. The restored teeth were incubated in bacterial medium containing sucrose with Streptoccus mutans for 14 days. Microradiographs of specimens showed no wall lesions in all groups and an acid-resistant layer adjacent to the restoration in the caries-like lesion. OB/EL, RB/LF and RB/RP groups showed thicker layers than the MB/EL group. The RB/RP group formed the shallowest outer lesion among all groups. These results indicate that fluoride-releasing adhesives are effective in the prevention of wall lesions but exhibit little outer lesion inhibition. Therefore, combined restoration using a fluoride-releasing adhesive and fluoride-releasing restorative material should be selected to inhibit secondary caries.

Effect of adhesives on the inhibition of secondary caries around compomer restorations.

This study evaluated the effect of adhesives on the inhibition of secondary caries around compomer restorations in vitro. Two adhesive systems with a Bis-GMA resin, Scotch bond Multi-purpose (MP) and Single Bond (SB), and one adhesive system with no Bis-GMA resin, F2000 compomer primer/adhesive (PA), were used prior to placement of the compomer (F2000), and non-fluoride releasing resin composite (Z100) was used as a control. Class V cavities prepared on extracted human premolars were restored with various combinations of materials: F2000/MP, F2000/SB, F2000/PA, Z100/MP, Z100/SB and Z100/PA. The restored teeth were incubated in bacterial medium containing sucrose with Streptococcus mutans for two weeks after storage for 14 days. On microradiographs, the radio-opaque layers adjacent to the F2000 restorations were thick and clear, while the layers in the Z100 restorations were unclear. In the F2000 restorations, the mean thickness of the radio-opaque layers in the PA group was significantly greater than that of the MP and SB groups. In fluoride-releasing measurement, F2000 coated with PA showed a significantly higher amount of fluoride release than MP and SB, and no significant difference in the amount of fluoride release from uncoated F2000. These results indicated that applying an adhesive without Bis-GMA resin to compomer restoration has no suppressive effect on the fluoride release from compomer and might be beneficial for inhibiting secondary caries in vitro.

Effects of polysiloxane coating of NaF on the release profile of fluoride ion from Bis-GMA/TEGDMA resin containing NaF.

The aim of this study was to regulate fluoride release from restorative resin containing NaF using N-(beta-aminoethyl)-gamma-aminopropylmethyldimethoxysilane (AMMS) and evaluate factors that regulate fluoride release from the resin. ESCA analysis, FT-IR measurements along with SEM observations demonstrated that a polysiloxane layer was formed on the surface of NaF treated with AMMS. Bis-GMA/TEGDMA resin containing NaF powder treated with AMMS released lower concentrations of fluoride for longer periods when compared with that containing untreated NaF. However, AMMS treatment of NaF was less effective for the regulation of fluoride released from the resin than gamma-methacryloxypropyltrimethoxysilane (gamma-MPTS) treatment, despite its higher hydrophobic polysiloxane layer formation. These findings may have been caused by the higher density of polysiloxane prepared with gamma-MPTS than that prepared with AMMS. The present findings suggested, therefore, that alkoxysilane should be chosen based not only on hydrophobicity but also the density of polysiloxane to effectively regulate fluoride release from the restorative resin containing NaF.

Alteration of odontoblast osteonectin expression following dental cavity preparation.

Cavity preparation can increase the active synthesis and secretion of non-collagenous proteins by odontoblasts, thus resulting in the deposition of tertiary dentine. In this study, the effect of cavity preparation on osteonectin expression was examined in odontoblasts of the rat tooth pulp. A class V cavity was prepared in rat first molars to stimulate odontoblastic secretory activity, and the animals were killed at various intervals. In the normal pulp, osteonectin immunoreactivity was detected in odontoblasts but not other cells. At 1 day after cavity preparation, immunoreactivity had diminished beneath the cavity. At 3 days, strong immunoreactivity could be detected in odontoblasts beneath the cavity. Numerous round cells underlying the odontoblastic layer also demonstrated immunoreactivity. Thereafter, the intensity of osteonectin immunoreactivity in odontoblasts beneath tertiary dentine decreased gradually, and at 30 and 60 days, it was weaker than in normal pulp. These findings suggest that osteonectin is actively synthesized by odontoblasts underlying a cavity in the initial stage of tertiary dentine formation.

Inhibition of artificial secondary caries in root by fluoride-releasing restorative materials.

This investigation evaluated the fluoride-releasing properties of various fluoride-releasing restorative materials, including resin-modified glass-ionomer cements (Fuji ionomer TypeII LC, Photac-Fil Aplicap, Vitremer), compomers (Ionosit FIL, Compoglass, Dyract) and fluoride-releasing resin composites (Heliomolar radiopaque, Degufill mineral). The study also estimated the effects of those materials on the inhibition of artificial secondary caries around restorations using a bacterial caries-inducing system. The amount of fluoride released from the materials in deionized water was measured every one week for 10 weeks. Class V cavities with the gingival margin located in the root were prepared in extracted human premolars and restored with each of the materials. The restored teeth were incubated in the bacterial artificial caries chamber, and the artificial lesion created around the restoration was observed microradiographically. The resin-modified glass-ionomer cements released the largest amount of fluoride and created a thick radio-opaque zone in the artificial lesion along the restoration-dentin interface. These results indicated that the fluoride-releasing restorative materials have the potential to inhibit secondary caries formation around restorations. Resin-modified glass-ionomer cements presented a particularly strong effect, compared with compomers and fluoride-releasing resin composites.

Osteopontin-immunoreactive primary sensory neurons in the rat spinal and trigeminal nervous systems.

1200 micrometer(2) and 9% of those in the range 600-1200 micrometer(2) showed the immunoreactivity (ir). DRG neurons <600 micrometer(2)800 micrometer(2) showed the ir and 21% of those in the range 400-800 micrometer(2) were immunoreactive for this protein. TG neurons <400 micrometer(2) were mostly devoid of OPN-ir (2%). Virtually all (99%) Mes5 primary sensory neurons exhibited the ir. Muscle spindles in the soleus and masseter muscles contained OPN-ir spiral axon terminals. In the hard palate and incisor periodontal ligament, unencapsulated corpuscular endings exhibited the ir. The co-expression of OPN with parvalbumin and calcitonin gene-related peptide (CGRP) was also examined in the DRG and TG. In the DRG, virtually all (97%) OPN-ir neurons exhibited parvalbumin-ir. Conversely, 66% of parvalbumin-ir DRG neurons co-expressed OPN-ir. In the TG, 81% of OPN-ir neurons exhibited parvalbumin-ir and 69% of parvalbumin-ir ones showed OPN-ir. Virtually all OPN-ir DRG and TG neurons were devoid of CGRP-ir. The present study indicates that OPN-ir primary sensory neurons in the DRG and Mes5 are spinal and trigeminal proprioceptors. OPN-ir TG neurons appear to include low-threshold mechanoreceptors.

Osteocalcin-immunoreactive primary sensory neurons in the rat spinal and trigeminal nervous systems.

Osteocalcin-immunoreactivity (OC-ir) was examined in spinal and trigeminal primary sensory neurons of the adult rat. Sixteen percent of dorsal root ganglion (DRG) neurons were immunoreactive (ir) for this protein. These neurons were mostly large and measured 594-4583 microm(2) (mean+/-S.D.=2243+/-748 microm(2)). Thirty-four percent of DRG neurons >1200 microm(2) and 4% of those in the range 600-1200 microm(2) showed the ir. Virtually all DRG neurons <600 microm(2) were devoid of OC-ir. In the trigeminal ganglion (TG), 25% of neurons exhibited the ir. Such neurons were of various sizes (range=156-2825 microm(2), mean+/-S.D.=1234+/-543 microm(2)). Forty-five percent of TG neurons >800 microm(2) and 6% of those <400 microm(2) were immunoreactive for this protein. Twelve percent of TG neurons in the range 400-800 microm(2) showed the ir. In the mesencephalic trigeminal tract nucleus (Mes5), 63% of primary sensory neurons contained OC-ir. Virtually all OC-ir DRG and Mes5 neurons co-expressed parvalbumin-ir but not CGRP-ir. On the other hand, only 31% of OC-ir neurons co-expressed parvalbumin-ir and 10% co-expressed CGRP-ir in the TG. The present study indicates that DRG and Mes5 primary sensory neurons co-expressing OC- and parvalbumin-irs are spinal and trigeminal proprioceptors. OC-ir TG neurons which co-express parvalbumin- and CGRP-irs appear to include low-threshold mechanoreceptors and nociceptors, respectively.

Cytotoxicity of a trial resin composite liner containing TiK2F6 on rat dental pulp cells.

The aim of this study was to assess the toxicological responses of a resin composite containing TiK2F6 and NaF in rat dental pulp cells. Trial resin composite liners were made, containing 3 wt% fluorides (TiK2F6 or NaF). These specimens were immersed in 5 ml of cell culture medium supplemented at 37 degrees C for 24 hours. The eluates were used for the experiments. We judged the cytotoxicity of the samples by the cell viability. The original elute solution was serially diluted and then the medium was exchanged for the dilute medium. The cell viability at 1, 2 or 5 days after commencement of re-culturing was calculated. The viability of cells in the eluate from the resin composite liners containing TiK2F6 and NaF decreased with time. The cytotoxicity of TiK2F6 was weaker than that of NaF at all times.

Inhibition of carious lesions in vitro around gallium alloy restorations by fluoride releasing resin-ionomer cement.

A new fluoride releasing resin-ionomer cement was used for bonding of gallium alloy restorations in vitro. Etching, priming, and fluoride releasing resin-ionomer cement were used in the experimental group (ARG), prior to placement of the gallium alloy restorations. Three different controls were used: gallium alloy only (G), no etching, fluoride releasing resin-ionomer cement, gallium alloy (RG), etching, priming, non-fluoride cement and gallium alloy (ACG). The mean shear bond strengths of ARG group to enamel and dentin were higher than those of the three control groups. Artificial secondary caries lesions around the restorations in the experimental group and the control groups were produced, using a strep. mutans culture. The microradiographs were examined for presence of a caries inhibition zone near the restoration. Caries inhibition zones were clearly detected around RG and ARG, but not around G and ACG. The results indicate that the fluoride releasing resin-ionomer cement provided good adhesion and caries inhibition in enamel and dentin.

Release and recharge of fluoride by restorative materials.

This study investigated the release and recharge of fluoride by restorative materials. Resin-modified glass ionomers (RGIs), polyacid-modified composite resins (PMCRs) and resin composite containing fluoride were used for comparison of fluoride release. Non-fluoride-releasing resin composite was used as a control. The amounts of fluoride release from RGIs and PMCRs remarkably increased in the citrate-phosphate acid buffer compared with distilled water. The amounts of fluoride recharged in RGIs increased with the concentration of NaF solution, but those of PMCRs exposed to all concentrations of NaF solutions were less than 1.5 ppm. Neither resin composite containing fluoride and non-fluoride-releasing resin composite gave any evidence of recharge. RGIs and PMCRs affected by acid buffer solution could not recharge much fluoride even if they were immersed in the 1000 ppmF NaF solution. The results suggested that the matrix of RGIs and PMCRs functioned as a reservoir of fluoride, but the functions were lost by acid attack.

Influence of filler content and gap dimension on wear resistance of resin composite luting cements around a CAD/CAM ceramic inlay restoration.

We investigated the influence of filler content and gap dimension on the wear resistance of composite luting cement around CAD/CAM ceramic inlay restorations. Experimental hybrid dual-cured composite luting cements containing 60, 70, 72, 74 and 80 wt% of silanated barium-silica fillers were used for cementing CAD/CAM ceramic inlay into the cavity. The specimens involving inlay-cement-tooth interfaces were subjected to a three-body wear test. The relation between the interfacial gap dimension and wear loss was also investigated using 60, 70 and 80 wt% filled cements. The cements containing more than 70 wt% filler presented significantly higher wear resistance than 60 wt% filled cement. There was a positive linear relationship between gap dimension and wear loss, and the inclination of the regression line decreased with increasing filler content. These results indicated that the higher filler content of the cement increased the wear resistance and this desirable influence appeared more remarkably in the wider horizontal gap dimension.

Effect of resin-modified glass ionomer cements on secondary caries.

PURPOSE: To evaluate the in vitro secondary caries inhibitory effect of two resin-modified glass ionomer cements (R-GICs). MATERIALS AND METHODS: Class V cavities were prepared at the cementoenamel junction on facial and lingual surfaces of 32 extracted upper premolars. The facial cavities were restored with a conventional glass ionomer cement (GIC) (Fuji II), while the lingual cavities were restored with either one of the R-GICs (Fuji II LC, Photac Fil, Vitremer), or a resin composite (Z-100). The margins of the restorations were subjected to a 20-day in vitro cariogenic challenge and the degree of demineralization was analyzed by microradiography. The amounts of fluoride released into distilled water from disc specimens of the materials tested were also measured for immersion time up to 161 days. RESULTS: The R-GICs and GIC's released similar cumulative amounts of fluoride over 161 days. Photac-Fil showed significantly higher amounts of fluoride release over the same period. The depth of the outer lesion and the thickness of the acid-resistant layer showed no significant difference among the R-GICs and GIC's. Moreover, the residual fluoride and calcium in the dentin adjacent to the R-GICs and GIC's were correlated with the thickness of acid-resistant layers in the dentin adjacent to the R-GICs and GIC's by electron probe microanalysis. However, the inhibitory effect of the R-GICs was not directly related to the fluoride concentrations eluted from them.