Significance of Hypoalbuminemia in the Development of Thromboembolic Complications in Severe Cases of SARS-CoV-2 Coronavirus Infection.

Background: The course of coronavirus disease 2019 (COVID-19) is associated with the progression of a wide range of complications, among which thrombosis and thromboembolism are of particular importance. The significance of hypoalbuminemia in the development of thromboembolic complications (TECs) in patients with a severe course of COVID-19 is currently under active discussion. The objective of our study was to evaluate the significance of hypoalbuminemia in the development of TECs in patients with severe SARS-CoV-2 coronavirus infection. Methods: In a single-center observational retrospective study, case histories of 1,634 patients with a verified diagnosis of SARS-CoV-2 coronavirus infection were analyzed. Patients were divided into two groups according to the presence of TECs: 127 patients with venous TECs constituted the main group and 1,507 patients, in whom the course of COVID-19 was not complicated by the development of TECs, constituted the comparison group. Results: The patients with TECs were older, and the prevalence of arterial hypertension, coronary heart disease, chronic heart failure, chronic kidney disease, and diabetes mellitus was higher than that in the comparison group. A single-factor regression analysis showed that a decrease in albumin levels of less than 35 g/L is associated with an eightfold increase in the risk of developing TECs in patients with severe SARS-CoV-2 coronavirus infection (area under the curve (AUC): 0.815, odds ratio (OR): 8.5389, 95% confidence interval (CI): 4.5637 - 15.977, P < 0.001). The sensitivity of the method was 76.34%, and the specificity was 72.58%. Conclusion: The study revealed that hypoalbuminemia is a predictor of development of TECs in severe cases of SARS-CoV-2 coronavirus infection.

Ring-Split: Deadlock-Free Routing Algorithm for Circulant Networks-on-Chip.

This article considers the usage of circulant topologies as a promising deadlock-free topology for networks-on-chip (NoCs). A new high-level model, Newxim, for the exploration of NoCs with any topology is presented. Two methods for solving the problem of cyclic dependencies in circulant topologies, which limit their applications for NoCs due to the increased possibility of deadlocks, are proposed. The first method of dealing with deadlocks is universal and applicable to any topology; it is based on the idea of bypassing blocked sections of the network on an acyclic subnetwork. The second method-Ring-Split-takes into account the features of circulant topologies. The results of high-level modeling and comparison of the peak throughput of NoCs for circulant and mesh topologies using deadlock-free routing algorithms are presented. It was shown that a new approach for routing in circulants (compared to mesh topology) shows up to 59% better network throughput with a uniform distribution of network load.

Preparation and Investigation of Spherical Powder Made from Corrosion-Resistant 316L Steel with the Addition of 0.2% and 0.5% Ag.

The paper describes the production and study of spherical powder made from corrosion-resistant 316L steel with the addition of 0.2% and 0.5% Ag. The study of granulometric composition, morphology, fluidity and bulk density, phase composition, microhardness and impurity composition of the spherical powders was carried out. The study showed compliance of the spherical powders with the requirements for powders used for additive manufacturing. The fluidity of the powders was 17.9 s, and the bulk density was 3.76 g/cm3. The particles have a spherical shape with a minimum number of defects and an austenitic-ferritic structure. The study of the phase composition of ingots, wires and powders showed that the ingot structure of all samples consists of austenite. According to the results of studies of the phase composition of the wire, there is a decrease in γ-Fe and an increase in α-Fe and σ-NiCr in going from wire No. 1 to wire No. 3. According to the results of studies of the phase composition of the powder particles, there are three phases, γ-Fe, α-Fe, and Fe3O4. The study of microhardness showed a decrease in HV depending on the increase in silver. The hardness of the powder is lower than that of the ingot by 16-24% due to the presence of a ferritic phase in the powder. As a result of plasma spraying, an increase in residual oxygen is observed, which is associated with the oxidation of the melt during plasma dispersion. The amount of nitrogen and sulfur does not change, while the amount of carbon and hydrogen decreases, and the impurities content corresponds to the standards for corrosion-resistant steel. Qualitative and quantitative analysis of the silver content in the samples indicates that it was not affected by the stages involved in obtaining the spherical powder.

Tooth enamel ESR dosimetry for Hiroshima 'black rain' zone residents.

Electron spin resonance (ESR) dosimetry was applied to human tooth enamel in order to obtain individual absorbed doses for victims of the Hiroshima bomb who lived in the 'black rain' area. The so-called 'black rain' fell in the form of precipitation on the western part of Hiroshima city and the northwestern suburbs within a few hours after the explosion of the atomic bomb on 6 August 1945, and exposed the population in this area. Only three tooth samples were collected from this area. Since the teeth were located at positions 1, 2 and 4, only the lingual portion was used for the analysis. The results showed that the excess dose after subtracting natural radiation for one (position 4; hh1) was background, for the second (position 2; hh2) it was 133 mGy, and for the other (position 1; hh3) it was 243 mGy. Based on these results, we further investigated the radiation dose attributed to dental X-rays and head CT scan. Such dose of the hh3 radiographic examination was estimated to be 57-160 mGy, which implies an additional exposure around 135 mGy after subtraction. On the other hand, the dose data of hh1 after subtracting dental X-rays was negative. This may mean that such additional doses are an overestimation. In addition, the effect of sunlight should be considered, which is the same direction of overestimation. As a result, the residual dose of 140 mGy suggests the inclusion of radiation from the 'black rain.'

Creation of a Nanomodified Backfill Based on the Waste from Enrichment of Water-Soluble Ores.

The paper analyzes losses during the development of low-value water-soluble ore deposits. The importance of development systems with backfill is shown. The use of industrial wastes of water-soluble ores to replace specially produced inert components in the preparation of backfill seems to be a good way to utilize them. The aim of the work was to create a fill mass with improved strength properties based on industrial wastes of water-soluble ores activated with a nanomodifying material. The characteristics (chemical and granulometric compositions) of an aggregate of the backfill based on the waste from enrichment of water-soluble ores are given. The validation of the hardening mixture compositions for various mining systems was carried out considering: the specified strength, the time of the artificial mass erection, the time to achieve the required strength properties of the material, which determine the possible intensity of the mining operations; method of transporting the backfill. The expediency of using a multilayer fulleroid nanomodifier astralene as a nanomodifying additive has been proved. The effect of the backfill activation with a nanomodifying additive, astralene, on the structural changes of halite wastes from the halurgic enrichment of water-soluble ores (potash) was investigated. To study the strength properties of the fill mass, the comparative analytical method was used. The strength properties of the backfill were measured in standard test periods, taking into account the intensity of hardening of the backfill material (after 7, 14, 28, 60, 90 days). To obtain reliable results, 10 backfill samples were tested at each of the scheduled dates. The shape and chemical composition of crystalline new forms were studied. Studies were performed using X-ray phase analysis and scanning electron microscopy. As a result of uniaxial compression of hardening backfill samples, the dependence of the ultimate strength on the astralene content and the hardening time were established. It has been experimentally proved that the use of a nanomodifying additive, astralene, in the backfill allows an increase in the strength properties of the created artificial mass by 1.76-2.36 times while reducing binder consumption.

Investigation of Antibacterial Properties of Corrosion-Resistant 316L Steel Alloyed with 0.2 wt.% and 0.5 wt.% Ag.

The article is devoted to the study of melted ingots, plates rolled from them, and the resulting spherical powder made of corrosion-resistant 316L steel with the addition of 0.2 wt.% and 0.5 wt.% Ag. The study of antibacterial properties, microstructure, and distribution of silver concentrations, as well as qualitative analysis of silver content was carried out. The optimal mode of homogenization annealing of the ingot was 1050 °C for 9 h, which leads to the formation of an austenitic structure. It is shown that the addition of a small amount of silver does not affect the formation of the austenitic structure and silver is distributed evenly throughout the volume of the ingot. The austenitic structure also prevails in the plates after rolling. Silver is distributed evenly throughout the entire volume of the plate. It is noted that the addition of 0.2 wt.% Ag does not affect the strength, elongation, and microhardness of steel, and the addition of 0.5 wt.% Ag does not significantly reduce the strength of steel, however, all samples meet the mechanical characteristics according to the ASTM A240 standard. The qualitative chemical composition of samples made of corrosion-resistant steels was confirmed by X-ray fluorescence analysis methods. By the method of energy-dispersion analysis, the presence of a uniform distribution of silver over the entire volume of the powder particle was determined. The particles have a spherical shape with a minimum number of defects. The study of the antibacterial activity of plates and powder shows the presence of a clear antibacterial effect (bacteria of the genus Xanthomonas campestris, Erwinia carotovora, Pseudomonas marginalis, Clavibacter michiganensis) in samples No. 2 and No. 3 with the addition of 0.2 wt.% and 0.5 wt.% Ag.

Design of a Digital 3D Model of Transport-Technological Environment of Open-Pit Mines Based on the Common Use of Telemetric and Geospatial Information.

This article is devoted to the issues of processing and analysis of heterogeneous information related to the functioning of mining transport equipment, which becomes available for analysis within the framework of modern technological operations control systems in open-pit mines. These issues are very relevant to robotized technological operations. The paper gives a brief overview of the modern landscape of the autonomous haulage systems management problems, the features of the platform approach to solving the problem of managing unmanned transport and technological processes in open pits are considered. The concept of an agent-based approach to the modeling of an open-pit mining is described in detail on the basis of the interaction of three systems: technical, infrastructural-technological, and geostructural. Some features of the developed platform architecture integration of heterogeneous information are discussed. The principles of information integration are considered in detail when constructing a dynamic 3D model (digital twin) of infrastructure and technological system elements using large arrays of telemetric data. The results of building digital models of open-pit technological roads are presented. The resulting models are comparatively analyzed in the process of optimizing of the interaction of technical autonomous mobile agents and elements of technological infrastructure.

RETROSPECTIVE ESR RECONSTRUCTION OF CATTLE TOOTH ENAMEL DOSES FROM THE RADIOACTIVE NUCLEI RELEASED BY THE ACCIDENT OF FUKUSHIMA DAI-ICHI ATOMIC POWER PLANTS.

The method of electron spin resonance (ESR) tooth enamel dosimetry was successfully applied to cattle molar teeth exposed in the accident of Fukushima Dai-ichi atomic power plants. Total of 10 samples from 5 cattle were examined and the doses were retrospectively reconstructed to be up to 1.2 Gy (enamel dose). The dose values are roughly consistent with those estimated from the monitored environmental dose rate and the durations of the exposure. This first successful result on ESR reconstruction of doses in the actual radiation accident indicates that ESR tooth enamel dosimetry with cattle is practically useful in the dose range of ~1 Gy.

Internal exposure to neutron-activated 56Mn dioxide powder in Wistar rats: part 1: dosimetry.

There were two sources of ionizing irradiation after the atomic bombings of Hiroshima and Nagasaki: (1) initial gamma-neutron irradiation at the moment of detonation and (2) residual radioactivity. Residual radioactivity consisted of two components: radioactive fallout containing fission products, including radioactive fissile materials from nuclear device, and neutron-activated radioisotopes from materials on the ground. The dosimetry systems DS86 and DS02 were mainly devoted to the assessment of initial radiation exposure to neutrons and gamma rays, while only brief considerations were given for the estimation of doses caused by residual radiation exposure. Currently, estimation of internal exposure of atomic bomb survivors due to dispersed radioactivity and neutron-activated radioisotopes from materials on the ground is a matter of some interest, in Japan. The main neutron-activated radionuclides in soil dust were 24Na, 28Al, 31Si, 32P, 38Cl, 42K, 45Ca, 46Sc, 56Mn, 59Fe, 60Co, and 134Cs. The radionuclide 56Mn (T 1/2 = 2.58 h) is known as one of the dominant beta- and gamma emitters during the first few hours after neutron irradiation of soil and other materials on ground, dispersed in the form of dust after a nuclear explosion in the atmosphere. To investigate the peculiarities of biological effects of internal exposure to 56Mn in comparison with external gamma irradiation, a dedicated experiment with Wistar rats exposed to neutron-activated 56Mn dioxide powder was performed recently by Shichijo and coworkers. The dosimetry required for this experiment is described here. Assessment of internal radiation doses was performed on the basis of measured 56Mn activity in the organs and tissues of the rats and of absorbed fractions of internal exposure to photons and electrons calculated with the MCNP-4C Monte Carlo using a mathematical rat phantom. The first results of this international multicenter study show that the internal irradiation due to incorporated 56Mn powder is highly inhomogeneous, and that the most irradiated organs of the experimental animals are: large intestine, small intestine, stomach, and lungs. Accumulated absorbed organ doses were 1.65, 1.33, 0.24, 0.10 Gy for large intestine, small intestine, stomach, and lungs, respectively. Other organs were irradiated at lower dose levels. These results will be useful for interpretation of the biological effects of internal exposure of experimental rats to powdered 56Mn as observed by Shichijo and coworkers.

Determination of the Average Native Background and the Light-Induced EPR Signals and their Variation in the Teeth Enamel Based on Large-Scale Survey of the Population.

The aim of the study is to determine the average intensity and variation of the native background signal amplitude (NSA) and of the solar light-induced signal amplitude (LSA) in electron paramagnetic resonance (EPR) spectra of tooth enamel for different kinds of teeth and different groups of people. These values are necessary for determination of the intensity of the radiation-induced signal amplitude (RSA) by subtraction of the expected NSA and LSA from the total signal amplitude measured in L-band for in vivo EPR dosimetry. Variation of these signals should be taken into account when estimating the uncertainty of the estimated RSA. A new analysis of several hundred EPR spectra that were measured earlier at X-band in a large-scale examination of the population of the Central Russia was performed. Based on this analysis, the average values and the variation (standard deviation, SD) of the amplitude of the NSA for the teeth from different positions, as well as LSA in outer enamel of the front teeth for different population groups, were determined. To convert data acquired at X-band to values corresponding to the conditions of measurement at L-band, the experimental dependencies of the intensities of the RSA, LSA and NSA on the m.w. power, measured at both X and L-band, were analysed. For the two central upper incisors, which are mainly used in in vivo dosimetry, the mean LSA annual rate induced only in the outer side enamel and its variation were obtained as 10 ± 2 (SD = 8) mGy y-1, the same for X- and L-bands (results are presented as the mean ± error of mean). Mean NSA in enamel and its variation for the upper incisors was calculated at 2.0 ± 0.2 (SD = 0.5) Gy, relative to the calibrated RSA dose-response to gamma radiation measured under non-power saturation conditions at X-band. Assuming the same value for L-band under non-power saturating conditions, then for in vivo measurements at L-band at 25 mW (power saturation conditions), a mean NSA and its variation correspond to 4.0 ± 0.4 (SD = 1.0) Gy.

EPR DOSIMETRY STUDY FOR POPULATION RESIDING IN THE VICINITY OF FALLOUT TRACE FOR NUCLEAR TEST ON 7 AUGUST 1962.

The method of electron paramagnetic resonance (EPR) dosimetry using extracted teeth has been applied to human tooth enamel to obtain individual absorbed doses of residents of settlements in the vicinity of the central axis of radioactive fallout trace from the contaminating surface nuclear test on 7 August 1962. Most of the settlements (Kurchatov, Akzhar, Begen, Buras, Grachi, Mayskoe, Semenovka) are located from 70 to 120 km to the North-East from the epicenter of the explosion at the Semipalatinsk Nuclear Test Site (SNTS). This region is basically an agricultural region. A total of 57 teeth samples were collected from these sites. Eight teeth from residents of the Kokpekty settlement, which was not subjected to any radioactive contamination and located 400 km to the Southeast from SNTS, were chosen as a control. The principal findings, using this method, were that the average excess dose obtained after subtraction of the natural background radiation was 13 mGy and ranged up to about 100 mGy all for residents in this region.

EPR pilot study on the population of Stepnogorsk city living in the vicinity of a uranium processing plant.

The aim of this pilot study was to evaluate possible doses in teeth received by workers of a uranium processing plant, in excess to the natural background dose. For this, the electron paramagnetic resonance dosimetry method was applied. Absorbed doses in teeth from the workers were compared with those measured in teeth from the Stepnogorsk city population and a control pool population from Astana city. The measured tooth samples were extracted according to medical indications. In total, 32 tooth enamel samples were analyzed, 5 from Astana city, Kazakhstan (control population), 21 from the residents of Stepnogorsk city (180 km from Astana city), and 6 from the workers of a uranium processing plant. The estimated doses in tooth enamel from the uranium processing plant workers were not significantly different to those measured in enamel from the control population. In teeth from the workers, the maximum dose in excess to background dose was 33 mGy. In two teeth from residents of Stepnogorsk city, however, somewhat larger doses were measured. The results of this pilot study encourage further investigations in an effort to receiving a final conclusion on the exposure situation of the uranium processing plant workers and the residents of Stepnogorsk city.

Comparative analysis between radiation doses obtained by EPR dosimetry using tooth enamel and established analytical methods for the population of radioactively contaminated territories.

A comparative analysis of radiation doses determined by tooth enamel electron paramagnetic resonance (EPR) spectroscopy and by an acknowledged analytical method is performed for individual doses and for average doses in population of some settlements of the Bryansk region (Russia), which have been contaminated after the Chernobyl nuclear accident. The analysis is performed for doses in the range of 0-200 mGy for individuals and in the range of 0-50 mGy for the averaged populations. The method of orthogonal distance linear regression is used for the analysis. For both data sets the slopes of the regression line close to unity and the intercept close to zero are obtained, which indicates that doses determined by these two methods agree with each other. The root-mean-square difference between the results of EPR and analytical methods is estimated to be 35 mGy for individual doses and 15 mGy for averaged doses, which is consistent with uncertainty of these methods.

ESR dosimetry study of population in the vicinity of the Semipalatinsk Nuclear Test Site.

A tooth enamel electron spin resonance (ESR) dosimetry study was carried out with the purpose of obtaining the individual absorbed radiation doses of population from settlements in the Semipalatinsk region of Kazakhstan, which was exposed to radioactive fallout traces from nuclear explosions in the Semipalatinsk Nuclear Test Site and Lop Nor test base, China. Most of the settlements are located near the central axis of radioactive fallout trace from the most contaminating surface nuclear test, which was conducted on 29 August 1949, with the maximum detected excess dose being 430 ± 93 mGy. A maximum dose of 268 ± 79 mGy was determined from the settlements located close to radioactive fallout trace resulting from surface nuclear tests on 24 August 1956 (Ust-Kamenogorsk, Znamenka, Shemonaikha, Glubokoe, Tavriya and Gagarino). An accidental dose of 56 ± 42 mGy was found in Kurchatov city residents located close to fallout trace after the nuclear test on 7 August 1962. This method was applied to human tooth enamel to obtain individual absorbed doses of residents of the Makanchi, Urdzhar and Taskesken settlements located near the Kazakhstan-Chinese border due to the influence of nuclear tests (1964-1981) at Lop Nor. The highest dose was 123 ± 32 mGy.

Estimation of background radiation doses for the Peninsular Malaysia's population by ESR dosimetry of tooth enamel.

Background radiation dose is used in dosimetry for estimating occupational doses of radiation workers or determining radiation dose of an individual following accidental exposure. In the present study, the absorbed dose and the background radiation level are determined using the electron spin resonance (ESR) method on tooth samples. The effect of using different tooth surfaces and teeth exposed with single medical X-rays on the absorbed dose are also evaluated. A total of 48 molars of position 6-8 were collected from 13 district hospitals in Peninsular Malaysia. Thirty-six teeth had not been exposed to any excessive radiation, and 12 teeth had been directly exposed to a single X-ray dose during medical treatment prior to extraction. There was no significant effect of tooth surfaces and exposure with single X-rays on the measured absorbed dose of an individual. The mean measured absorbed dose of the population is 34 ± 6.2 mGy, with an average tooth enamel age of 39 years. From the slope of a regression line, the estimated annual background dose for Peninsular Malaysia is 0.6 ± 0.3 mGy y(-1). This value is slightly lower than the yearly background dose for Malaysia, and the radiation background dose is established by ESR tooth measurements on samples from India and Russia.

Radiation dose measurement by electron spin resonance studies of tooth enamel in lime and non-lime consuming individuals from the Silchar region of northeast India.

Electron spin resonance (ESR) dosimetry of teeth is used extensively for dose estimation following exposure to radiation. The population inhabiting the northeast region of India is prone to different cancers of the head and neck, and their prevalence is several times the national average. The objective of this study was to determine the role of radiation in the causation of this high cancer incidence by performing ESR spectroscopic measurements of tooth samples collected from the general population living in and around the city of Silchar. Nineteen tooth samples were used, and the age of the patients was 13-60 years. The excess dose, determined by subtraction of the natural background dose from the dose absorbed by the enamel, was found to the extent of 123 +/- 43 mGy. However, the individual excess dose was found to be higher in subjects who consumed lime (5/6) than in non-lime-consuming subjects (2/13). It is not entirely clear if radiation is the cause of this excess cancer in this region of India. Therefore there is a need for wider studies including consideration of tobacco consumption as well as a larger number of samples for tooth enamel dosimetry.

ESR dosimetry study on population of settlements nearby Ust-Kamenogorsk city, Kazakhstan.

The method of electron spin resonance (ESR) dosimetry has been applied to human tooth enamel, to obtain individual absorbed doses of residents of settlements in vicinity of Ust-Kamenogorsk city, Kazakhstan (located about 400 km to the east from the epicenter of explosion at the Semipalatinsk Nuclear Test Site, SNTS). This region developed as a major mining and metallurgical center during the Soviet period (uranium production). Most of the investigated settlements (Ust-Kamenogorsk city, Glubokoe, Tavriya, Gagarino) are located near the central axis of the radioactive fallout trace that originated from the surface nuclear test on 24 August 1956, while the Kokpekty settlement (located 400 km to the Southeast from SNTS) was chosen as a control because it was not subjected to any radioactive contamination. In total, 44 samples were measured. It was found that the excess doses obtained after subtraction of natural background radiation ranged up to about 114 mGy for residents of Ust-Kamenogorsk city, whose tooth enamel was formed before 1956. For residents of Gagarino, excess doses did not exceed 47 mGy for all ages. For residents of Tavriya, the maximum excess dose was 54 mGy, while for residents of Glubokoe it was about 58 mGy. For the population of the Shemonaikha settlements located at a distance of about 70 km from the central axis of the radioactive fallout trace, highest excess doses were 110 mGy. These high doses may be due to the influence of uranium enterprises located in that region, but probably not due to dental X-ray irradiation. For a final conclusion on the radiological situation in this region, the number of samples was too small and, therefore, more work is required to obtain representative results.

Measurement of absorbed doses from X-ray baggage examinations to tooth enamel by means of ESR and glass dosimetry.

The contribution of radiation from X-ray baggage scans at airports on dose formation in tooth samples was investigated by electron spin resonance (ESR) dosimetry and by glass dosimetry. This was considered important, because tooth samples from population around the Semipalatinsk Nuclear Test Site (SNTS), Kazakhstan, had been transported in the past to Hiroshima University for retrospective dose assessment of these residents. Enamel samples and glass dosimeters were therefore examined at check-in time at Kansai airport (Osaka, Japan), Dubai airport (Dubai, United Arab Emirates) and Domodedovo airport (Moscow, Russia). These airports are on the route from Kazakhstan to Japan. Three different potential locations of the samples were investigated: in pocket (without X-ray scans), in a small bag (with four X-ray scans) and in large luggage (with two X-ray scans). The doses obtained by glass and ESR dosimetry methods were cross-compared. As expected, doses from X-ray examinations measured by glass dosimetry were in the microGy range, well below the ESR detection limit and also below the doses measured in enamel samples from residents of the SNTS.

Effects of sunlight exposure on the human tooth enamel ESR spectra used for dose reconstruction.

The effects of solar radiation on the ESR signals in human tooth enamel were investigated. Enamel samples were exposed to the sunlight in Hiroshima, Japan, on sunny days for a total of about 228 hours over one year. The intensity of the illuminating sunlight was measured with a light meter, which then was converted to the intensity of the solar radiation. Three types of signals caused by the solar radiation were identified. The signal named S1 is identical to the gamma ray radiation-induced axially symmetrical signal and contains two signals S1( perpendicular) and S1(//) corresponding to the perpendicular and parallel components of the g-tensor characterized by g( perpendicular) = 2.0018 and g(//) = 1.9975 respectively. In addition, two other peaks named S2 and S3 are induced by the solar radiation. S2 is very near the inherent signal with g = 2.0052, possibly created by the same paramagnetic centers as the natural signal, and S3 is a weaker signal with g = 2.010. On increasing the amount of solar radiation S1 increases linearly, but S2 and S3 reach saturation. The average effect of the solar radiation on the S1( perpendicular) signal is estimated by dose equivalent gamma ray irradiation as 7.8 +/- 0.5 mGy (MJ m(-2))(-1), which corresponds to 19.6 +/- 1.3 mGy h(-1) at the latitude of Hiroshima. Signals S2 and S3 may be used to recognize the effect of solar radiation on the enamel.

Considerations regarding the implementation of EPR dosimetry for the population in the vicinity of Semipalatinsk nuclear test site based on experience from other radiation accidents.

General aspects of applying the method of retrospective dose estimation by electron paramagnetic resonance spectroscopy of human tooth enamel (EPR dosimetry) to the population residing in the vicinity of the Semipalatinsk nuclear test site are analyzed and summarized. The analysis is based on the results obtained during 20 years of investigations conducted in the Medical Radiological Research Center regarding the development and practical application of this method for wide-scale dosimetrical investigation of populations exposed to radiation after the Chernobyl accident and other radiation accidents.