RESUMO
HYPOTHESIS: Although protein adsorption at an interface is very common and important in biology and biotechnology, it is still not fully understood - mainly due to the intricate balance of forces that ultimately control it. In food processing (and medicine), controlling and manipulating protein adsorption, as well as avoiding protein adsorption (biofilm formation or membrane fouling) by the production of protein-resistant surfaces is of substantial interest. A major factor conferring resistance towards protein adsorption to a surface is the presence of tightly bound water molecules, as is the case in oligo ethylene glycol (OEG)-terminated self-assembled monolayers (SAMs). Due to strong attractive protein-protein and protein-surface interactions observed in systems containing trivalent salt ions, we hypothesize that these conditions may lead to a breakdown of protein resistance in OEG SAMs. EXPERIMENTS: We studied the adsorption behavior of BLG in the presence of a lanthanum(III) chloride (LaCl3) at concentrations of 0, 0.1, 0.8 and 5.0 mM on normally protein resistant triethylene glycol-termianted (EG3) SAMs on a gold surface. We used quartz-crystal microbalance with dissipation (QCM-D) and neutron reflectivity (NR) to characterize the morphology of the interfacial region of the SAM. FINDINGS: We demonstrate that the protein resistance of the EG3 SAM breaks down beyond a threshold salt concentration c∗ and mirrors the bulk behaviour of this system, showing reduced adsorption beyond a second critical salt concentration c∗∗. These results demonstrate for the first time the controlled switching of the protein-resistant properties of this type of SAM by the addition of trivalent salt.
Assuntos
Etilenoglicol , Lactoglobulinas , Adsorção , Ouro , Propriedades de Superfície , ÁguaRESUMO
HYPOTHESIS: Protein adsorption is highly relevant in numerous applications ranging from food processing to medical implants. In this context, it is important to gain a deeper understanding of protein-protein and protein-surface interactions. Thus, the focus of this investigation is on the interplay of bulk properties and surface properties on protein adsorption. It was hypothesised that the type of solvent and ions in solution should significantly influence the protein's bulk and interface behaviour, which has been observed in literature and previous work for other net negatively charged, globular proteins such as bovine serum albumin (BSA). EXPERIMENTS: The phase behaviour of ß-lactoglobulin (BLG) with lanthanum chloride (LaCl3) and iodide (LaI3) in normal water H2O(l) and heavy water (D2O(l)) was established via optical microscopy and ultraviolet-visible spectroscopy. The formation of an adsorption layer and its properties such as thickness, density, structure, and hydration was investigated via neutron reflectivity, quartz-crystal microbalance with dissipation, and infra-red measurements. FINDINGS: ß-lactoglobulin does not show significant anion-induced or isotope-induced effects - neither in bulk nor at the solid-liquid interface, which deviates strongly from the behaviour of bovine serum albumin. We also provide a comprehensive discussion and comparison of protein-specific bulk and interface behaviour between bovine serum albumin and ß-lactoglobulin dependent on anion, cation, solvent, and substrate properties. These findings pave the way for understanding the transition from adsorption to crystallisation.
Assuntos
Lactoglobulinas , Soroalbumina Bovina , Adsorção , Isótopos , Propriedades de Superfície , ÁguaRESUMO
Proteins are ubiquitous and play a critical role in many areas from living organisms to protein microchips. In humans, serum albumin has a prominent role in the foreign body response since it is the first protein which will interact with, e.g., an implant or stent. In this study, we focused on the influence of salts (i.e., different cations (Y3+, La3+) and anions (Cl-, I-) on bovine serum albumin (BSA) in terms of its bulk behavior as well as the role of charges for protein adsorption at the solid-liquid interface in order to understand and control the underlying molecular mechanisms and interactions. This is part of our group's effort to gain a deeper understanding of protein-protein and protein-surface interactions in the presence of multivalent ions. In the bulk, we established two new phase diagrams and found not only multivalent cation-triggered phase transitions, but also a dependence of the protein behavior on the type of anion. The attractive interactions between proteins were observed to increase from Cl- < NO3- < I-, resulting in iodide preventing re-entrant condensation and promoting liquid-liquid phase separation in bulk. Using ellipsometry and a quartz-crystal microbalance with dissipation (QCM-D), we obtained insight into the growth of the protein adsorption layer. Importantly, we found that phase transitions at the substrate can be triggered by certain interface properties, whether they exist in the bulk solution or not. Through the use of a hydrophilic, negatively charged surface (native silica), the direct binding of anions to the interface was prevented. Interestingly, this led to re-entrant adsorption even in the absence of re-entrant condensation in bulk. However, the overall amount of adsorbed protein was enhanced through stronger attractive protein-protein interactions in the presence of iodide salts. These findings illustrate how carefully chosen surface properties and salts can directly steer the binding of anions and cations, which guide protein behavior, thus paving the way for specific/triggered protein-protein, protein-salt, and protein-surface interactions.
RESUMO
In all areas related to protein adsorption, from medicine to biotechnology to heterogeneous nucleation, the question about its dominant forces and control arises. In this study, we used ellipsometry and quartz-crystal microbalance with dissipation (QCM-D), as well as density-functional theory (DFT) to obtain insight into the mechanism behind a wetting transition of a protein solution. We established that using multivalent ions in a net negatively charged globular protein solution (BSA) can either cause simple adsorption on a negatively charged interface, or a (diverging) wetting layer when approaching liquid-liquid phase separation (LLPS) by changing protein concentration (cp) or temperature (T). We observed that the water to protein ratio in the wetting layer is substantially larger compared to simple adsorption. In the corresponding theoretical model, we treated the proteins as limited-valence (patchy) particles and identified a wetting transition for this complex system. This wetting is driven by a bulk instability introduced by metastable LLPS exposed to an ion-activated attractive substrate.
RESUMO
Electrophilic aromatic substitution produces edge-specific modifications to CVD graphene and graphene nanoplatelets that are suitable for specific attachment of biomolecules.
RESUMO
We demonstrate that silanization can control the adhesion of nanostructures to the SiN windows compatible with liquid-cell transmission electron microscopy (LC-TEM). Formation of an (3-aminopropyl)triethoxysilane (APTES) self-assembled monolayer on a SiN window, producing a surface decorated with amino groups, permits strong adhesion of Au nanoparticles to the window. Many of these nanoparticles remain static, undergoing minimal translation or rotation during LC-TEM up to high electron beam current densities due to the strong interaction between the APTES amino group and Au. We then use this technique to perform a direct comparative LC-TEM study on the behavior of ligand and nonligand-coated Au nanoparticles in a Au growth solution. While the ligand coated nanoparticles remain consistent even under high electron beam current densities, the naked nanoparticles acted as sites for secondary Au nucleation. These nucleated particles decorated the parent nanoparticle surface, forming consecutive monolayer assemblies of â¼2 nm diameter nanoparticles, which sinter into the parent particle when the electron beam was shut off. This method for facile immobilization of nanostructures for LC-TEM study will permit more sophisticated and controlled in situ experiments into the properties of solid-liquid interfaces in the future.
RESUMO
The encapsulation of CdSe nanocrystals within single-walled carbon nanotube (SWNT) cavities of varying dimensions at elevated temperatures under strictly air-tight conditions is described for the first time. The structures of CdSe nanocrystals under confinement inside SWNTs was established in a comprehensive study, combining both experimental and DFT theoretical investigations. The calculated binding energies show that all considered polymorphs [(3:3), (4:4), and (4:2)] may be obtained experimentally. The most thermodynamically stable structure (3:3) is directly compared to the experimentally observed CdSe structures inside carbon nanotubes. The gas-phase DFT-calculated energy difference between "free" 3:3 and 4:2 structures (whereby 3:3 models a novel tubular structure in which both Cd and Se form three coordination, as observed experimentally for HgTe inside SWNT, and 4:2 is a motif derived from the hexagonal CuI bulk structure in which both Cd and Se form 4 or 2 coordination) is surprisingly small, only 0.06â eV per formula unit. X-ray powder diffraction, Raman spectroscopy, high-resolution transmission electron microscopy, and energy-dispersive X-ray analyses led to the full characterization of the SWNTs filled with the CdSe nanocrystals, shedding light on the composition, structure, and electronic interactions of the new nanohybrid materials on an atomic level. A new emerging hybrid nanomaterial, simultaneously filled and beta-d-glucan coated, was obtained by using pristine nanotubes and bulk CdSe powder as starting materials. This displayed fluorescence in water dispersions and unexpected biocompatibility was found to be mediated by beta-d-glucan (a biopolymer extracted from barley) with respect to that of the individual inorganic material components. For the first time, such supramolecular nanostructures are investigated by life-science techniques applied to functional nanomaterial characterization, opening the door for future nano-biotechnological applications.
RESUMO
Protein adsorption at the solid-liquid interface is an important phenomenon that often can be observed as a first step in biological processes. Despite its inherent importance, still relatively little is known about the underlying microscopic mechanisms. Here, using multivalent ions, we demonstrate the control of the interactions and the corresponding adsorption of net-negatively charged proteins (bovine serum albumin) at a solid-liquid interface. This is demonstrated by ellipsometry and corroborated by neutron reflectivity and quartz-crystal microbalance experiments. We show that the reentrant condensation observed within the rich bulk phase behavior of the system featuring a nonmonotonic dependence of the second virial coefficient on salt concentration c_{s} is reflected in an intriguing way in the protein adsorption d(c_{s}) at the interface. Our findings are successfully described and understood by a model of ion-activated patchy interactions within the framework of the classical density functional theory. In addition to the general challenge of connecting bulk and interface behavior, our work has implications for, inter alia, nucleation at interfaces.
Assuntos
Modelos Químicos , Proteínas/química , Dióxido de Silício/química , Adsorção , Soroalbumina Bovina/químicaRESUMO
The oxidation of adsorbed CO is a key reaction in electrocatalysis. It has been studied extensively on both extended model surfaces and on nanoparticles; however, correlation between the two is far from simple. Molecular insight into the reaction is often provided using in situ IR spectroscopy; however, practical challenges mean in situ studies on nanoparticles have yet to provide the same level of detail as those on model surfaces. Here we use a new approach to in situ IR spectroscopy to study the mechanism of CO adlayer oxidation on a commercial carbon-supported Pt catalyst. We observe bipolar IR absorption bands but develop a simple model to enable fitting. Quantitative analysis of band behavior during the oxidation prepeak using the model agrees well with previous analysis based on conventional absorption bands. A second linear CO band is observed during the main oxidation region and is assigned to the distinct contribution of CO on step as opposed to terrace sites. Analysis of the step and terrace CO bands during oxidation shows that oxidation begins on the terraces of the nanoparticles before CO on steps is removed. Further correlation of this behavior with the current shows that step CO is only lost in the first of the two main oxidation peaks.
RESUMO
Interactions and phase behavior of γ-globulins are of fundamental interest in biophysical and pharmaceutical research, as these are among the most abundant proteins in blood plasma. In this work, we report the characterization of the oligomeric state of bovine γ-globulin, the effective protein-protein interactions, and the colloidal stability in aqueous solution as a function of protein concentration and ionic strength. Classical biochemical techniques, such as size exclusion chromatography (SEC) and gel electrophoresis, together with small-angle X-ray and neutron scattering (SAXS/SANS), were employed for this study. The results show that bovine γ-globulin solutions are dominated by monomer and idiotype anti-idiotype dimer. Despite the flexibility and highly nonspherical shape of the protein, a simple model with a disk-type form factor and a structure factor of a square-well potential provide a satisfying description of the scattering data. The overall interactions are attractive and the strength decreases with increasing protein concentration, or adding buffer or salts. For higher protein volume fraction (>7%), the model would imply a strong particle-particle correlation which does not appear in the experimental data. This mismatch is most likely due to the smearing effect of the conformation change of proteins in solution. The stability of γ-globulin solutions is highly sensitive to protein concentration, ionic strength, and the type of added salts, such as NaCl, Na2SO4, and NaSCN. For solutions below 50 mg/mL and at low ionic strengths (<0.1 M), protein aggregation is most likely due to subpopulations of IgG molecules with attractive patches of complementary surface charge. This effect is reduced for higher protein concentration due to self-buffering effects. For high ionic strength (>1 M), typical salting-in (with NaSCN) and salting-out effects (with NaCl and Na2SO4) are observed. Results are further discussed in comparison with current studies in the literature on monoclonal antibodies.
Assuntos
gama-Globulinas/química , Animais , Bovinos , Coloides/química , Soluções , Água/químicaRESUMO
Functional porphyrins have attracted intense attention due to their remarkably high extinction coefficients in the visible region and potential for optical and energy-related applications. Two new routes to functionalised SWNTs have been established using a bulky ZnII -porphyrin featuring thiolate groups at the periphery. We probed the optical properties of this zinc(II)-substituted, bulky aryl porphyrin and those of the corresponding new nano-composites with single walled carbon nanotube (SWNTs) and coronene, as a model for graphene. We report hereby on: i)â the supramolecular interactions between the pristine SWNTs and ZnII -porphyrin by virtue of π-π stacking, and ii)â a novel covalent binding strategy based on the Bingel reaction. The functional porphyrins used acted as dispersing agent for the SWNTs and the resulting nanohybrids showed improved dispersibility in common organic solvents. The synthesized hybrid materials were probed by various characterisation techniques, leading to the prediction that supramolecular polymerisation and host-guest functionalities control the fluorescence emission intensity and fluorescence lifetime properties. For the first time, XPS studies highlighted the differences in covalent versus non-covalent attachments of functional metalloporphyrins to SWNTs. Gas-phase DFT calculations indicated that the ZnII -porphyrin interacts non-covalently with SWNTs to form a donor-acceptor complex. The covalent attachment of the porphyrin chromophore to the surface of SWNTs affects the absorption and emission properties of the hybrid system to a greater extent than in the case of the supramolecular functionalisation of the SWNTs. This represents a synthetic challenge as well as an opportunity in the design of functional nanohybrids for future sensing and optoelectronic applications.
RESUMO
Extending the use of novel anti-graffiti coatings to built heritage could be of particular interest providing the treatments are efficient enough in facilitating graffiti removal and long-lasting to maintain their protective properties without interfering with the durability of the substrates. However, studies of the durability of these coatings are scarce and have been mainly carried out under accelerated weathering conditions, the most common practice for assessing the durability of materials but one that does not reproduce accurately natural working conditions. The present study aimed to assess the durability of the anti-graffiti protection afforded by two anti-graffiti treatments (a water dispersion of polyurethane with a perfluoropolyether backbone and a water based crystalline micro wax) on Portland limestone and Woodkirk sandstone after 1 year of outdoor exposure in the South of England with periodic painting and cleaning episodes taking place. A parallel study under artificial weathering conditions in a QUV chamber for 2000 hours was also carried out. Changes to the coatings were assessed by measuring colour, gloss, water-repellency, roughness and microstructure, the latter through micro-Raman and optical microscope observations, periodically during the experiments. The results show that both anti-graffiti treatments deteriorated under both artificial and natural weathering conditions. For the polyurethane based anti-graffiti treatment, artificial ageing produced more deterioration than 1 year of outdoor exposure in the south of England due to loss of adhesion from the stones, whereas for micro wax coating there were no substantial differences between the two types of weathering.
Assuntos
Manufaturas , Carbonato de Cálcio/química , Manufaturas/análise , Pinturas , Propriedades de Superfície , Tempo (Meteorologia)RESUMO
Adsorbed formate is observed on a supported Pt nanoparticle for the first time during formic acid electro-oxidation. Bands assigned to OCO stretching and CH bending reveal some OCO but little CH bond weakening on adsorption compared to the free anion. The formate potential dependence is similar to polycrystalline electrodes while adsorbed CO persists up to +1.2 V, 0.5 V higher than on polycrystalline Pt.
RESUMO
We report a real-time study on protein crystallization in the presence of multivalent salts using small angle X-ray scattering (SAXS) and optical microscopy, focusing particularly on the nucleation mechanism as well as on the role of the metastable intermediate phase (MIP). Using bovine beta-lactoglobulin as a model system in the presence of the divalent salt CdCl2, we have monitored the early stage of crystallization kinetics which demonstrates a two-step nucleation mechanism: protein aggregates form a MIP, which is followed by the nucleation of crystals within the MIP. Here we focus on characterizing and tuning the structure of the MIP using salt and the related effects on the two-step nucleation kinetics. The results suggest that increasing the salt concentration near the transition zone pseudo-c** enhances the energy barrier for both MIPs and crystal nucleation, leading to slow growth. The structural evolution of the MIP and its effect on subsequent nucleation is discussed based on the growth kinetics. The observed kinetics can be well described, using a rate-equation model based on a clear physical two-step picture. This real-time study not only provides evidence for a two-step nucleation process for protein crystallization, but also elucidates the role and the structural signature of the MIPs in the nonclassical process of protein crystallization.
Assuntos
Lactoglobulinas/química , Animais , Bovinos , Cristalização , Cinética , Microscopia Eletrônica de Transmissão , Modelos Moleculares , Conformação Proteica , Espalhamento a Baixo Ângulo , Difração de Raios XRESUMO
We present a real-time study of protein crystallization of bovine ß-lactoglobulin in the presence of CdCl(2) using small-angle X-ray scattering and optical microscopy. From observing the crystallization kinetics, we propose the following multistep crystallization mechanism that is consistent with our data. In the first step, an intermediate phase is formed, followed by the nucleation of crystals within the intermediate phase. During this period, the number of crystals increases with time, but the crystal growth is slowed down by the surrounding dense intermediate phase due to the low mobility. In the next step, the intermediate phase is consumed by nucleation and slow growth, and the crystals are exposed to the dilute phase. In this stage, the number of crystals becomes nearly constant, whereas the crystals grow rapidly due to access to the free protein molecules in the dilute phase. This real-time study not only provides evidence for a two-step nucleation process for protein crystallization but also elucidates the role and the structural signature of the metastable intermediate phase in this process.
Assuntos
Lactoglobulinas/química , Animais , Bovinos , Cristalização , Lactoglobulinas/ultraestrutura , Estabilidade Proteica , Espalhamento a Baixo Ângulo , Difração de Raios XRESUMO
We have studied oligo(ethylene glycol) (OEG) thiol self-assembled monolayer (SAM) coated gold nanoparticles (AuOEG) and their interactions with proteins in solutions using electrophoretic and dynamic light scattering (ELS and DLS). The results are compared with poly(ethylene glycol) (PEG) thiol coated AuNPs (AuPEG). We show that both AuOEG and AuPEG particles carry a low net negative charge and are very stable (remaining so for more than one year), but long-term aging or dialysis can reduce the stability. If the decorated AuNPs are mixed with bovine serum albumin (BSA), both effective size and zeta-potential of the AuNPs remain unchanged, indicating no adsorption of BSA to the colloid surface. However, when mixed with lysozyme, zeta-potential values increase with protein concentrations and lead to a charge inversion, indicating adsorption of lysozyme to the colloid surface. The colloidal solutions of AuOEG become unstable near zero charge, indicated by a cluster peak in the DLS measurements. The AuPEG solutions show similar charge inversion upon addition of lysozyme, but the solutions are stable under all experimental conditions, presumably because of the strong steric effect of PEG. Washing the protein bound colloids by centrifugation can remove only part of the adsorbed lysozyme molecules indicating that a few proteins adsorb strongly to the colloids. The effective charge inversion and rather strongly bound lysozyme on the colloid surface may suggest that in addition to the charges formed at the SAM-water interface, there are defects on the surface of the colloid, which are accessible to the proteins. The results of this study of surface charge, and stability shed light on the interaction with proteins of SAM coated AuNPs and their applications.
Assuntos
Etilenoglicóis/química , Ouro/química , Nanopartículas Metálicas/química , Proteínas/química , Compostos de Sulfidrila/química , Coloides , Concentração de Íons de Hidrogênio , Soluções , Espectrofotometria Ultravioleta , Propriedades de SuperfícieRESUMO
The investigation of electrocatalytic nanoeffects is tackled via joint electrochemical measurements and computational simulations. The cyclic voltammetry of electrodes modified with metal nanoparticles is modeled considering the kinetics of the electrochemical process on the bulk materials of the different regions of the electrode, that is, the substrate (glassy carbon) and the nanoparticles (gold). Comparison of experimental and theoretical results enables the detection of changes in the electrode kinetics at the nanoscale due to structural and/or electronic effects. This approach is applied to the experimental assessment of electrocatalytic effects by gold nanoparticles (Au NPs) in the electrooxidation of nitrite and L-ascorbate. Glassy carbon electrode is modified with Au NPs via seed-mediated growth method. Divergence between the kinetics of these processes on gold macroelectrodes and gold nanoparticles is examined. Whereas claimed catalytic effects are not observed in the electrooxidation of nitrite, electrocatalytic nanoeffects are verified in the case of L-ascorbate. This is probably due to that the electron transfer process follows an adsorptive mechanism. The combination of simulation with experiments is commended as a general strategy of authentification, or not, of nanoelectrocatalytic effects.
Assuntos
Ácido Ascórbico/química , Carbono/química , Eletroquímica/métodos , Eletrodos , Ouro/química , Nanopartículas Metálicas/química , Nitritos/químicaRESUMO
Macromolecular crowding in biological media is an essential factor for cellular function. The interplay of intermolecular interactions at multiple time and length scales governs a fine-tuned system of reaction and transport processes, including particularly protein diffusion as a limiting or driving factor. Using quasielastic neutron backscattering, we probe the protein self-diffusion in crowded aqueous solutions of bovine serum albumin on nanosecond time and nanometer length scales employing the same protein as crowding agent. The measured diffusion coefficient D(Ï) strongly decreases with increasing protein volume fraction Ï explored within 7% ≤ Ï ≤ 30%. With an ellipsoidal protein model and an analytical framework involving colloid diffusion theory, we separate the rotational D(r)(Ï) and translational D(t)(Ï) contributions to D(Ï). The resulting D(t)(Ï) is described by short-time self-diffusion of effective spheres. Protein self-diffusion at biological volume fractions is found to be slowed down to 20% of the dilute limit solely due to hydrodynamic interactions.
Assuntos
Substâncias Macromoleculares/química , Modelos Químicos , Soroalbumina Bovina/química , Difusão , Difração de Nêutrons , Rotação , Água/químicaRESUMO
In this study the temperature dependent confor-mation of hexa(ethylene glycol) self-assembling monolayers (SAMs) under aqueous conditions (in situ) is investigated. To this end characteristic absorption modes in the fingerprint region (1050-1500 cm(-1)) were monitored with real-time polarization modulation infrared spectroscopy. We found a temperature induced conformational change from predominantly helical to helical/all-trans. The process may be divided into two temperature regimes. Up to 40 °C the process is reversible after drying the monolayers in air and successive reimmersion in water, indicating a strong binding of the water molecules to the SAM. At higher temperatures, the conformational change is irreversible. Additionally, a rapid change to a larger mode width and a shift of the mode position to higher wavenumbers (blue-shift) at about 50 °C indicates structural changes caused by decreasing crystallinity of the SAM. While the conformational changes up to 40 °C are supposed to originate from an increased conformational freedom in combination with a stronger interaction with water molecules, the irreversibility and rapid change of mode characteristics at higher temperatures indicate chemical degradation. Complementary measurements in air show a fast and virtually complete reversibility up to 40 °C underlining the effect of the interaction of the ethylene glycol moiety with water. At temperatures above 50 °C modes indicating ester and formate groups appear, supporting the idea of chemical degeneration. Moreover, the temperature behavior is coverage dependent. At incomplete coverage the structural order of the SAM starts decreasing at lower temperatures. This study shows, that the conformational and structural change of hexa(ethylene glycol) SAMs at elevated temperature is an interplay of conformational changes of the SAM, its interaction with water and at higher temperatures its chemical degradation. Our experiments also underline the importance of the in situ analysis on the film structure.
RESUMO
The effective interactions and phase behavior of protein solutions under strong electrostatic coupling conditions are difficult to understand due to the complex charge pattern and irregular geometry of protein surfaces. This distinguishes them from related systems such as DNA or conventional colloids. In this work, we discuss the question of universality of the reentrant condensation (RC) of proteins in solution induced by multivalent counterions, i.e., redissolution on adding further salts after phase separation, as recently discovered (Zhang et al., Phys Rev Lett 2008; 101:148101). The discussion is based on a systematic investigation of five different proteins with different charge patterns and five different multivalent counterions. Zeta potential measurements confirm the effective charge inversion of proteins in the reentrant regime via binding of multivalent counterions, which is supported by Monte Carlo simulations. Charge inversion by trivalent cations requires an overall negative net charge of the protein. Statistical analysis of a representative set of protein sequences reveals that, in theory, this effect could be possible for about half of all proteins. Our results can be exploited for the control of the phase behavior of proteins, in particular facilitating protein crystallization.