Luminescence Thermometry Probes Local Heat Effects at the Platinum Electrode Surface during Alkaline Water Electrolysis.

Accurate determination of the temperature dynamics at the electrode surface is crucial for advancing electrocatalysis, particularly in the development of stable materials that aid energy conversion and storage technologies. Here, lanthanide-based in situ luminescence thermometry was used to probe local heat effects at the platinum electrode surface during alkaline water electrolysis. It is demonstrated that the oxygen evolution reaction (OER) induces a more significant temperature increase compared to the hydrogen evolution reaction (HER) under the same electrochemical conditions. This difference is attributed to variations in overpotential heating and local effects on Joule heating. Furthermore, local heat effects are not observed at increased electrolyte concentrations during the HER, whereas substantial temperature variations (up to 2 K) are detected for the OER at higher electrolyte concentrations. Our observations highlight the potential of in situ luminescence thermometry to measure interfacial temperature effects during electrocatalytic reactions.

Alternative nano-lithographic tools for shell-isolated nanoparticle enhanced Raman spectroscopy substrates.

Chemically synthesized metal nanoparticles (MNPs) have been widely used as surface-enhanced Raman spectroscopy (SERS) substrates for monitoring catalytic reactions. In some applications, however, the SERS MNPs, besides being plasmonically active, can also be catalytically active and result in Raman signals from undesired side products. The MNPs are typically insulated with a thin (∼3 nm), in principle pin-hole-free shell to prevent this. This approach, which is known as shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS), offers many advantages, such as better thermal and chemical stability of the plasmonic nanoparticle. However, having both a high enhancement factor and ensuring that the shell is pin-hole-free is challenging because there is a trade-off between the two when considering the shell thickness. So far in the literature, shell insulation has been successfully applied only to chemically synthesized MNPs. In this work, we alternatively study different combinations of chemical synthesis (bottom-up) and lithographic (top-down) routes to obtain shell-isolated plasmonic nanostructures that offer chemical sensing capabilities. The three approaches we study in this work include (1) chemically synthesized MNPs + chemical shell, (2) lithographic substrate + chemical shell, and (3) lithographic substrate + atomic layer deposition (ALD) shell. We find that ALD allows us to fabricate controllable and reproducible pin-hole-free shells. We showcase the ability to fabricate lithographic SHINER substrates which report an enhancement factor of 7.5 × 103 ± 17% for our gold nanodot substrates coated with a 2.8 nm aluminium oxide shell. Lastly, by introducing a gold etchant solution to our fabricated SHINER substrate, we verified that the shells fabricated with ALD are truly pin-hole-free.

Mapping Temperature Heterogeneities during Catalytic CO2 Methanation with Operando Luminescence Thermometry.

Controlling and understanding reaction temperature variations in catalytic processes are crucial for assessing the performance of a catalyst material. Local temperature measurements are challenging, however. Luminescence thermometry is a promising remote-sensing tool, but it is cross-sensitive to the optical properties of a sample and other external parameters. In this work, we measure spatial variations in the local temperature on the micrometer length scale during carbon dioxide (CO2) methanation over a TiO2-supported Ni catalyst and link them to variations in catalytic performance. We extract local temperatures from the temperature-dependent emission of Y2O3:Nd3+ particles, which are mixed with the CO2 methanation catalyst. Scanning, where a near-infrared laser locally excites the emitting Nd3+ ions, produces a temperature map with a micrometer pixel size. We first designed the Y2O3:Nd3+ particles for optimal temperature precision and characterized cross-sensitivity of the measured signal to parameters other than temperature, such as light absorption by the blackened sample due to coke deposition at elevated temperatures. Introducing reaction gases causes a local temperature increase of the catalyst of on average 6-25 K, increasing with the reactor set temperature in the range of 550-640 K. Pixel-to-pixel variations in the temperature increase show a standard deviation of up to 1.5 K, which are attributed to local variations in the catalytic reaction rate. Mapping and understanding such temperature variations are crucial for the optimization of overall catalyst performance on the nano- and macroscopic scale.

How Temperature Affects the Selectivity of the Electrochemical CO2 Reduction on Copper.

Copper is a unique catalyst for the electrochemical CO2 reduction reaction (CO2RR) as it can produce multi-carbon products, such as ethylene and propanol. As practical electrolyzers will likely operate at elevated temperatures, the effect of reaction temperature on the product distribution and activity of CO2RR on copper is important to elucidate. In this study, we have performed electrolysis experiments at different reaction temperatures and potentials. We show that there are two distinct temperature regimes. From 18 up to ∼48 °C, C2+ products are produced with higher Faradaic efficiency, while methane and formic acid selectivity decreases and hydrogen selectivity stays approximately constant. From 48 to 70 °C, it was found that HER dominates and the activity of CO2RR decreases. Moreover, the CO2RR products produced in this higher temperature range are mainly the C1 products, namely, CO and HCOOH. We argue that CO surface coverage, local pH, and kinetics play an important role in the lower-temperature regime, while the second regime appears most likely to be related to structural changes in the copper surface.

In Situ Luminescence Thermometry To Locally Measure Temperature Gradients during Catalytic Reactions.

Bandshape luminescence thermometry during in situ temperature measurements has been reported by preparing three catalytically relevant systems, which show temperature-dependent luminescence. One of these systems was further investigated as a showcase for application. Microcrystalline NaYF4 doped with Er3+ and Yb3+ was mixed with a commercial zeolite H-ZSM-5 to investigate the Methanol-to-Hydrocarbons (MTH) reaction, while monitoring the reaction products with online gas chromatography. Due to the exothermic nature of the MTH reaction, a front of increased temperature migrating down the fixed reactor bed was visualized, showing the potential for various applications of luminescence thermometry for in situ measurements in catalytic systems.