Jute Stick-Derived Cellulose-Based Hydrogel: Synthesis, Characterization, and Methylene Blue Removal from Aqueous Solution.

In this work, microcrystalline cellulose (MCC) was isolated from jute sticks and sodium carboxymethyl cellulose (Na-CMC) was synthesized from the isolated MCC. Na-CMC is an anionic derivative of microcrystalline cellulose. The microcrystalline cellulose-based hydrogel (MCCH) and Na-CMC-based hydrogel (Na-CMCH) were prepared by using epichlorohydrin (ECH) as a crosslinker by a chemical crosslinking method. The isolated MCC, synthesized Na-CMC, and corresponding hydrogels were characterized by Fourier transform infrared (FTIR), X-ray diffraction (XRD), scanning electronic microscopy (SEM), and energy dispersive spectroscopy (EDS) for functional groups, crystallinity, surface morphology, and composite elemental composition, respectively. Pseudo-first-order, pseudo-second-order, and Elovich models were used to investigate the adsorption kinetics. The pseudo-second-order one is favorable for both hydrogels. Freundlich, Langmuir, and Temkin adsorption isotherm models were investigated. MCCH follows the Freundlich model (R2 = 0.9967), and Na-CMCH follows the Langmuir isotherm model (R2 = 0.9974). The methylene blue (MB) dye adsorption capacities of ionic (Na-CMCH) and nonionic (MCCH) hydrogels in different contact times (up to 600 min), initial concentrations (10-50 ppm), and temperatures (298-318 K) were investigated and compared. The maximum adsorption capacity of MCCH and Na-CMCH was 23.73 and 196.46 mg/g, respectively, and the removal efficiency of MB was determined to be 26.93% for MCCH and 58.73% for Na-CMCH. The Na-CMCH efficiently removed the MB from aqueous solutions as well as spiked industrial wastewater. The Na-CMCH also remarkably efficiently reduced priority metal ions from an industrial effluent. An effort has been made to utilize inexpensive, readily available, and environmentally friendly waste materials (jute sticks) to synthesize valuable adsorbent materials.

Poly[(2-methacryloyloxy)Ethyl]Trimethylammonium Chloride Supported Cobalt Oxide Nanoparticles as an Active Electrocatalyst for Efficient Oxygen Evolution Reaction.

To combat with energy crisis considering clean energy, oxygen evolution reaction (OER) is crucial to implement electrolytic hydrogen fuel production in real life. Here, straightforward chemical synthesis pathways are followed to prepare cobalt tetraoxide nanoparticles (Co3 O4 NPs) in an alkaline OER process using poly[(2-methacryloyloxy)ethyl]trimethylammonium chloride (Co3 O4 NPs@PMTC) as support to prevent aggregation. In material characterization, the X-ray diffraction (XRD) pattern confirms the crystallinity of the synthesized Co3 O4 NPs@PMTC, and Raman spectroscopy indicates that the Co3 O4 NPs contain cubic close-packed oxides. The morphological analysis reveals the wrinkle-like disruption which is distributed evenly owing to the folded nanosheet arrays. Energy-dispersive X-ray spectroscopy indicates the presence of a significant number of cobalt atoms in the Co3 O4 NPs, and elemental mapping analysis demonstrates the composition of the NPs. At a current density of 10 mA cm-2 , oxygen is emitted at 1.67 V delivering an overpotential of 440 mV. This unique structure of Co3 O4 NPs@PMTC provides beneficial functions that are responsible for a large number of active sites and the rapid release of oxygen gas with long-term stability. Through kinetic study, we found a Tafel slope of 48.9 mV dec-1 which proves the catalytic behavior of Co3 O4 NPs@PMTC is promising toward the OER process.

Acridine and Its Derivatives: Synthesis, Biological, and Anticorrosion Properties.

The phenomenon of corrosion threatens metallic components, human safety, and the economy. Despite being eco-friendly and promising as a corrosion inhibitor, acridine has not been explored to its full potential. In this review, we have discussed multiple biological activities that acridines have been found to show in a bid to prove that they are environmentally benign and much less toxic than many inhibitors. Some synthetic routes to acridines and substituted acridines have also been discussed. Thereafter, a multitude of acridines and substituted acridines as corrosion inhibitors of different metals and alloys in various corrosive media have been highlighted. A short mechanistic insight into how acridine-based compounds function as corrosion inhibitors have also been included. We believe this review will generate an impression that there is still much to learn about previously reported acridines. In the wake of recent surges to find efficient and non-toxic corrosion inhibitors, acridines and their analogs could be an appropriate answer.

Recent Development in Laminar Transition Metal Dichalcogenides-Based Membranes Towards Water Desalination: A Review.

Transition metal dichalcogenides (TMDCs)-based laminar membranes have gained significant interest in energy storage, fuel cell, gas separation, wastewater treatment, and desalination applications due to single layer structure, good functionality, high mechanical strength, and chemical resistivity. Herein, we review the recent efforts and development on TMDCs-based laminar membranes, and focus is given on their fabrication strategies. Further, TMDCs-based laminar membranes for water purification and seawater desalination are discussed in detail. Finally, present their merits, limits and future challenges needed in this area.

Carbon Nanofiber and Poly[2-(methacryloyloxy) ethyl] Trimethylammonium Chloride Composite as a New Benchmark Carbon-based Electrocatalyst for Sulfide Oxidation.

There is an overwhelming desire to develop new sulfide oxidation electrocatalysts that perform at low potentials and exhibit high current density for the removal and efficient sensing of sulfide. This article describes a comparative electrochemical analysis of various commercially available carbon materials and polymer/surfactant composite electrocatalysts for direct electrooxidation of sulfide in an aqueous solution. The composites were prepared from five different carbon materials multiwalled carbon nanotubes, fullerene-C60 , graphene, glassy carbon, and carbon nanofibers (CNF) and four different polymers: chitosan, polyvinylidene fluoride, Nafion, and indigenously synthesized poly[2-(methacryloyloxy)ethyl] trimethylammonium chloride (PMTC). The carbon@polymer composites were prepared by a simple ultrasonication technique, and the electrodes were prepared by drop-drying the prepared composite on indium tin oxide (ITO) substrates. The CNF@PMTC showed the highest positive zeta potential that allowed an accumulation of many negatively charged sulfide ions at the CNF@PMTC surface. Cyclic voltammetry was used for the electrooxidation of sulfide in an aqueous solution of tris buffer (0.05 M; pH 8.0) and KNO3 (0.1 M). The lowest sulfide oxidation peak potential (i. e., -51 mV vs. standard hydrogen electrode) with a high catalytic current response (730 µA/cm2 ) of the CNF@PMTC-modified ITO electrode among the tested and previously reported carbon-based electrode materials make it ideal for direct sulfide electrooxidation. Taking this and its simple preparation method into account, CNF@PMTC can be considered a benchmark carbon-based electrocatalyst for sulfide oxidation.

Bioinspired Heterocyclic Compounds as Corrosion Inhibitors: A Comprehensive Review.

Corrosion is a phenomenon that devastatingly affects innovative, industrial, and mechanical applications, especially in the oil and gas industries. The corrosion conceivably influences industrial equipment; it deteriorates the environment and lessens the equipment/infrastructure's lifetime. Considering the significant impact of corrosion in our daily lives, this review article aims to briefly discuss the significance of corrosion and different control methods with special attention on corrosion inhibitors. The classification of corrosion inhibitors based on types and their advantage/limitations, and heterocyclic compounds as potential corrosion inhibitors, mainly nitrogen-based compounds (pyridine (1N), pyrimidine (2N), and triazines (3N) fused ring benzimidazole, etc.), and their biological significance has been discussed in detail. The mechanism, challenges, and applications of heterocyclic compounds as corrosion inhibitors in various industrial relevant corrosive environments such as acid pickling, descaling operation in the desalination plant, oil gas industry, etc., have also been highlighted in the review.

Highly Efficient Permeation and Separation of Gases with Metal-Organic Frameworks Confined in Polymeric Nanochannels.

This work demonstrates the confinement of porous metal-organic framework (HKUST-1) on the surface and walls of track-etched nanochannel in polyethylene terephthalate (np-PET) membrane using a liquid-phase epitaxy (LPE) technique. The composite membrane (HKUST-1/np-PET) exhibits defect-free MOF growth continuity, strong attachment of MOF to the support, and a high degree of flexibility. The high flexibility and the strong confinement of the MOF in composite membrane results from (i) the flexible np-PET support, (ii) coordination attachment between HKUST-1 and the support, and (iii) the growth of HKUST-1 crystal in nanoconfined geometries. The MOF has a preferred growth orientation with a window size of 3.5 Å, resulting in a clear cut-off of CO2 from natural gas and olefins. The experimental results and DFT calculations show that the restricted diffusion of gases only takes place through the nanoporous MOF confined in the np-PET substrate. This research thereby provides a new perspective to grow other porous MOFs in artificially prepared nanochannels for the realization of continuous, flexible, and defect-free membranes for various applications.

Assessment of sulfonated homo and co-polyimides incorporated polysulfone ultrafiltration blend membranes for effective removal of heavy metals and proteins.

Sulfonated homo and co- polyimide (sPI) were synthesized with new compositional ratios, and used as additives (0.5 wt%, 0.75 wt%, and 1.0 wt%) to prepare blend membranes with polysulfone (PSf). Flat sheet membranes for ultrafiltration (UF) were casted using the phase inversion technique. Surface morphology of the prepared UF membranes were characterized by atomic force microscopy (AFM) and scanning electron microscopy (SEM). Surface charge of the membranes were determined by zeta potential, and hydrophilicity was studied by contact angle measurement. The contact angle of the membrane decreased with increasing sPI additive indicates increasing the hydrophilicity of the blend membranes. Filtration studies were conducted for rejection of heavy metals (Pb2+ and Cd2+) and proteins (pepsin and BSA). Blend membranes showed better rejection than pure PSf membrane. Among the blend membranes it was observed that with increasing amount of sPIs enhance the membrane properties and finally, PSf-sPI5 membrane with 1 wt% of sPI5 showed the improved permeability (72.1 L m-2 h-1 bar-1), and the best rejection properties were found for both metal ions (≈98% of Pb2+; ≈92% of Cd2+) and proteins (>98% of BSA; > 86% of Pepsin). Over all, this membrane was having better hydrophilicity, porosity and higher number of sites to attach the metal ions. Its performance was even better than several-reported sulfonic acid based UF membranes. All these intriguing properties directed this new UF membrane for its potential application in wastewater treatment.

Synthesis, characterization and electrochemical analysis of cysteine modified polymers for corrosion inhibition of mild steel in aqueous 1 M HCl.

Butler's cyclopolymerization protocol was used to synthesize homo and copolymers of cysteine residues and diallyldimethylammonium chloride (DADMAC) using water as a solvent and excellent yields were obtained. The structural composition of the polymers was determined using nuclear magnetic resonance (NMR) and Fourier-transform infrared (FT-IR) spectroscopies. The thermal stability of the synthesized polymers was determined using thermogravimetric analysis (TGA). The corrosion efficiencies and adsorption characteristics of these polymers on mild steel were evaluated using gravimetric weight loss and potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS). The copolymers of cysteine residues and DADMAC exhibited excellent inhibition efficiencies in arresting mild steel corrosion in 1 M hydrochloric acid (HCl) at 60 °C. The best fitted Langmuir, Temkin and Freundlich adsorption isotherms suggested that the adsorption process occurs through chemisorption and physisorption. The surface morphology of mild steel in the presence or absence of polymers was determined using atomic force microscopy (AFM), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX), and X-ray photoelectron spectroscopy (XPS). This systematic study might provide a way to design new inhibitor compounds that could be beneficial in the field of biomedical science as well as for anti-corrosion applications.

Correction: Synthesis, characterization and electrochemical analysis of cysteine modified polymers for corrosion inhibition of mild steel in aqueous 1 M HCl.

[This corrects the article DOI: 10.1039/C8RA09833F.].