Maze-Based Scalable Wireless Power Transmission Experimental Arena for Freely Moving Small Animals Applications.

This paper presents an innovative T/Y-maze-based wireless power transmission (WPT) system designed to monitor spatial reference memory and learning behavior in freely moving rats. The system facilitates uninterrupted optical/electrical stimulation and neural recording experiments through the integration of wireless headstages or implants in T/Y maze setups. Utilizing an array of resonators covering the entire underneath of the mazes, the wireless platform ensures scalability with various configurations. The array is designed to ensure a natural localization mechanism to localize the Tx power toward the location of the Rx coil. The system is analyzed and modeled using ANSYS HFSS software to optimize design. The primary goal was to achieve uniform wireless power delivery throughout the mazes through a comparative study of different transmitter (Tx) array configurations, such as float, series, and parallel resonators. The calculated Specific Absorption Rate (SAR) in rat tissue model equals 1.7 W/kg at the power carrier frequency of 13.56 MHz. A prototype of the proposed maze-based WPT design, featuring 8 Tx resonators, a Tx coil and power amplifier, and a headstage power harvesting unit, is successfully implemented and its performance characterized for all three resonator configurations. The implemented T maze-based WPT system has a total length of 128 cm. In the overlapping Tx resonators configuration, a homogeneity of 94% is achieved for the measured power transfer efficiency at over 30%, while continuously delivering over 60 mW for series configuration.

Thermally programmable time delay switches for multi-step assays in paper-based microfluidics.

Paper-based microfluidic devices offer advantages such as low cost and disposability for point-of-care diagnostic applications. However, actuation of fluids on paper can be a challenge in multi-step and complex assays. In this work, a thermally programmable time-delay switch (TPTDS) is presented which operates by causing delays in the fluid path of a microfluidics paper-based analytical device (µPAD) by utilizing screen-printed wax micro-bridges. The time-delay is achieved through an electrical power feedback loop which indirectly adjusts the temperature of each individual micro-bridge, melting the wax into the paper. The melted wax manipulates the fluid flow depending on its penetration depth into the paper channel, which is a function of the applied temperature. To demonstrate functionality of the proposed method, the TPTDS is employed to automate and perform the nitrate assay which requires sequential delivery of reagents. Colorimetric detection is used to quantify the results by utilizing an electronic color sensor.